Can't read E-mail address with more than 25 characters

It is not possible to read the full e-mail address if it's longer tha 25 characters

Hello,
same problem for everyone I guess... only way to read the whole address is to Edit the entry... on an iPhone a click would open MobileMail.app, but that is not much help on the average iPod
Volker

Similar Messages

Using SMTP I can not use a mail server with more than 13 characters. I get an error from TCP open

I have no trouble sending an email if the mail server name is less than 13 characters long. I get an error 54 from TCP open when it exceeds that length. How do I get around this?

Don't know what to say, I just tried the SMTP email VI I have with an 18-character mail server address and everything worked fine. The error 54 means that the address is ill-formed.
The only thing I would suggest is trace the mail-server address down through the hierarchy and make sure nothing is done to modify it. Also try putting a probe on the wire going into the TCP open function and make sure the string you see there is the same one you are using. Finally, change the formatting of the control taking the address into the subvi that contains the TCP open function (SMTP Open Session.vi)to show the slash codes and make sure some invisible characters aren't getting added along the way.
As a last resort save the vi in 6.0 format and send it to me and I'll
try it on my system--maybe there's something screwy going on with your computer...
Mike...
Certified Professional Instructor
Certified LabVIEW Architect
LabVIEW Champion
"... after all, He's not a tame lion..."
Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps

Owa_text.vc_arr: can't handle the string with more than 4000 characters?

In the Oracel Web Application Server 4.0 documment, it says
about owa_text.vc_arr :Type vc_arr is table of varchar2(32767)
index by binary_integer.
I amusing PL_SQL with Oracle8i and OWA4.0 web server.I want to
use owa_text.vc_arr to pass the multple line texts in my form.
If the text length is less than 4000 characters, everything works
fine.However when the texts are longer than 4000 characters but
less than the max length 32767 characters, I got this error
message:
OWS-05101: Execution failed due to Oracle error 2005
ORA-02005: implicit (-1) length not valid for this bind or define
datatype.
Owa_text.vc_arr is supposed to handle the string with more
than 4000 characters, is it true? Could anyone tell me why? Any
help will be greatly appreciated!!!
Thanks very much.
Helena Wang
Here is the pl_sql procedure to create my form:
PROCEDURE myform
IS
BEGIN
htp.p('
<form action="'||service_path||'helena_test.saveform3"
method=post>
<input type=hidden name=tdescription value="X">
Input1: <textarea name=tdescription rows=50 cols=70
WRAP=physical></textarea>
Input2: <textarea name=tdescription rows=50 cols=70
WRAP=physical></textarea>
<input type=submit name=WSave value="Save">
</form>
END;
/***** here is the pl_sql procedure which I use to save the
form***/
procedure saveform3(tdescription in owa_text.vc_arr,
WSave in varchar2 default 'No')
is
len pls_integer;
begin
for i in 2..tdescription.count loop
len := length(tdescription(i));
htp.p(len);
htp.p(tdescription(i));
end loop;
end;

Helena, I think you might get a better response either from the SQL-PL/SQL forum, or perhaps the Portal Applications forum - both of these tend to have folks very familiar with PL/SQL and the OWA packages.
This forum is on Web services based on SOAP, WSDL and UDDI. These can be PL/SQL based but typically don't use the mod_psql or OWA web solution.
As a pointer, I suspect you may already be familiar with, but just in case, you can always take a look at chapter 3 of the OAS documentation, "Developer's Guide: PL/SQL and ODBC Applications" where they go through a number of examples using parameters. See:
http://technet.oracle.com/doc/appsrvr4082/guides/plsql.pdf
Hope this or folks from the other list can help.
Mike.

Why can't owa_text.vc_arr handle the string with more than 4000 characters?

I am using PL_SQL with Oracle8i and OAS 4.0 web server.I want to
use owa_text.vc_arr to pass the inputs in serval text areas in the form on a web application.
If the input string length is less than 4000 characters, everything works fine.However when the strings are longer than 4000 characters but less than the max length 32767 characters, I got this error message:
OWS-05101: Execution failed due to Oracle error 2005
ORA-02005: implicit (-1) length not valid for this bind or define datatype.
In the Oracle Application Server 4.0 documment, it says
about owa_text.vc_arr :Type vc_arr is table of varchar2(32767)
index by binary_integer. It means that owa_text.vc_arr can handle multiple strings and each string can have up to 32767 single byte characters, is it right?
Owa_text.vc_arr is supposed to handle the string with more
than 4000 characters, is it true? Could anyone tell me why? Any
help will be greatly appreciated!!!
Thanks very much.
Helena Wang
Here is the pl_sql procedure to create my form on the web:
PROCEDURE myform
IS
BEGIN
htp.p('
<form action="'||service_path||'helena_test.saveform3"
method=post>
<input type=hidden name=tdescription value="X">
Input1: <textarea name=tdescription rows=50 cols=70
WRAP=physical></textarea>
Input2: <textarea name=tdescription rows=50 cols=70
WRAP=physical></textarea>
<input type=submit name=WSave value="Save">
</form>
END;
/***** here is the pl_sql procedure which I use to save the
form***/
procedure saveform3(tdescription in owa_text.vc_arr,
WSave in varchar2 default 'No')
is
len pls_integer;
begin
for i in 2..tdescription.count loop
len := length(tdescription(i));
htp.p(len);
htp.p(tdescription(i));
end loop;
end;

The maximum size of a VARCHAR2 field in Oracle 8i is 4000 bytes.
you'll ned to use a LOB type (or LONG if you prefer the old way)

Can my tunes library me associated with more than one iCloud account?

Can my iTunes library be associated with more than one iCloud account?

No, but as mentioned in my answer to your other post, you can share the same iTunes ID with your family and maintain separate iCloud accounts with separate IDs.

How to read an internal table with more than one (2 or 3) key field(s).

how to read an internal table with more than one (2 or 3) key field(s). in ecc 6.0 version

hi ,
check this..
report.
tables: marc,mard.
data: begin of itab occurs 0,
      matnr like marc-matnr,
      werks like marc-werks,
      pstat like marc-pstat,
      end of itab.
data: begin of itab1 occurs 0,
      matnr like mard-matnr,
      werks like mard-werks,
      lgort like mard-lgort,
      end of itab1.
parameters:p_matnr like marc-matnr.
select matnr
       werks
       pstat
       from marc
       into table itab
       where matnr = p_matnr.
sort itab by matnr werks.
select matnr
       werks
       lgort
       from mard
       into table itab1
       for all entries in itab
       where matnr = itab-matnr
       and werks = itab-werks.
sort itab1 by matnr werks.
loop at itab.
read table itab1 with key matnr = itab-matnr
                          werks = itab-werks.
endloop.
regards,
venkat.

Sending an email with more than 75 characters

Please can you tell me, how i can send an email with more than 75 characters from a workflow. We need to send a link which has more than 130 characters.

Hi Benjamin,
You have a couple of options:
Put your link into a container element and put that into your text instead of hardcoding it.
Instead of the sendmail step, create a task based on SELFITEM.SENDTASKDESCRIPTION. This is exacly the same as the mail step minus the 'different' step editor in the builder. There you can create the text using the sapscript editor and join lines up.
Have a look around OSS, there are some notes on this issue.
Cheers
Mike

Can I use a magic trackpad with more than one Mac at a time?

I am attempting to pair a MTP with a second MacBook Pro. So far I can't get system preferences to find the MTP.
I am wondering whether the MTP can be paired with only one Mac at a time, and that this is why my MBP won't find it.
The reason I am thinking this is because the little booklet that comes with the MTP says 'after you pair your MTP with a Mac, you can pair it again with a different Mac. To do this, you first remove the existing pairing and then pair the trackpad again'.
Can anyone advise, please?
If it can be paired with more than one MBP at a time, any suggestions why my system preferences search for the MTP is not producing any results?
Thanks

Yes, your keyboard, mouse or trackpad can be paired with multiple Macs. You can even have multiple keyboards, mice or trackpads paired with one Mac. The caveat is that the device can only be connected to one Mac at a time. The device can't be paired or connected with a Mac while it's currently connected to another.
Pairing a device with 2 Macs will be troublesome if the Macs are located within 33 ft of each other. The device will connect with the first available paired Mac and then unavailable to the second. If the Macs are located outside the 10meter range, it's quite easy to power off the keyboard (forcing a disconnect) then walking the keyboard to Mac 2 and powering the keyboard on. I do this with a keyboard from my iMac to a Mac Mini in another room.
Captfred

How can I to Update all colum with more than 3 digits

Hi
How can I to update a tabel in all column where values have more than 3 digits in decimal point , eg:
10.35789882232 wil be 10.358
11.4523455 will be 11.452
Using Round (number, 3), How can I to know What columns have more than 3 digits in decimal ?

Always wonder about why someone would ask.
XYZ@TTST> select 1/3*3 from dual;
1/3*3
1
XYZ@TTST> set numw 50
XYZ@TTST> select 1/3*3 from dual;
1/3*3
.9999999999999999999999999999999999999999
Remember, Oracle has to convert numbers to its internal format, and not all numbers convert back and forth cleanly. So the display may make things look different than they are.
There are legitimate reasons to round existing data (like, they should have been rounded before insertion), but there are also illegitimate reasons, like confusing display with storage.
See http://laurentschneider.com/wordpress/2009/03/11.html#comments

Sending attachment to outlook with more than 25 characters

Hi All,
issue is related to sending outlook mail with attachment ( more than 255 characters ) .
We are using the FM .SO_NEW_DOCUMENT_ATT_SEND_API1
but in this it is taking a max of 255 characters .
so can anybody please suggest on this asap.
Thanks

Hi Amit,
Thanks a lot for u r responce ....
My problem got solved ......with u r thread ....
I already given u the reward points .
thanks regards,

Excel 2007 to Sql server table. Column with more than 255 characters.

Hi there,
I am facing a problem while converting data from Excel 2007 to SQL server 2005 table. I am using BIDS 2005.I have an excel file where one particular column has more than 255 characters. I use OLEDB connection for excel file as there is no driver for Excel
2007 in BIDS2005. I am using Microsoft Office 12.0 Access Database Engine OLE DB Provider for Excel file.
Next, I changed advanced properties for the column to DT_NTEXT. But when I am getting errors on execution. They are:
[OLE DB Source [1949]] Error: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80040E21.
[OLE DB Source [1949]] Error: Failed to retrieve long data for column "action".
[OLE DB Source [1949]] Error: There was an error with output column "action" (2046) on output "OLE DB Source Output" (1959). The column status returned was: "DBSTATUS_UNAVAILABLE".
[OLE DB Source [1949]] Error: SSIS Error Code DTS_E_INDUCEDTRANSFORMFAILUREONERROR. The "output column "action" (2046)" failed because error code 0xC0209071 occurred, and the error row disposition on "output column "action"
(2046)" specifies failure on error. An error occurred on the specified object of the specified component. There may be error messages posted before this with more information about the failure.
Please advise on how can I deal with columns having more than 255 characters in Excel file.
Thanks!

Here is what your connection string should look like for excel source
Provider
=Microsoft.Jet.OLEDB.4.0;Data
Source=c:\temp\test.xls;Extended
Properties="EXCEL 8.0;HDR=YES";
http://sqlworkday.blogspot.com/

SQL Loader fails to process string columns with more than 255 characters

Hi all,
I am using LKM file to sqlldr(oracle) to load data from flat file to oracle. I am aware of the fact that if you don't specify length of the input character data, sqlldr uses default of 255 characters. But, in my source datastore I have specified the column length to be 1000, but sqlldr still fails to process records with more that 255 characters.
Any idea how to change this behavior of sqlldr?
Appreciate your response.
Akshata

You can change the step "Generate CTL File"
and replace the section:
          } else {
          // The source column is a STRING => no options to add
               format = "";
          };with
          } else {
          // The source column is a STRING => add char(length) for length greater than 255
               taille = new Integer(colPrecision).intValue();
               if (taille > 254)
               format = "CHAR("+colPrecision+")";
               else
               format ="";
          };

Inserting data with more than 255 characters in to MSACCESS through JDBC

Hi All,
I have developed a product using servlets,JDBC,HTML.The backend is MS access database.
I have to provide an option for the user to key in more than 255 characters of data in the textarea & then store it in the access database.But i read that access ODBC driver has a limit of 255 characters.Is this correct.
I tried changing the Datatype of the field from text to Memo field in MS ACCESS.But when i insert the data using setString method of the PreparedStatement ,it's giving the following SQL exception:SQLException caught:[Microsoft][ODBC Microsoft Access Driver]String data, right truncated (null)
How do i let an user key in more than 255 characters.Can somebody help me on this please ASAP as this is a very crucial issue which i need to solve by tomorrow.
Thanks in Advance
GCR

hi rashmi,
HOw bout using CLOB facility to store such large strings?? try it.
Cheers,
-Jer

Need to create Table Maintenance with more than 400 characters

I need to create table maintenance in which one filed have more than 400 characters. CHAR type support between 1-255 & STRING type not supported by Table Maintenance. Is there any alternative type or solution for that?

Hi,
If you assign TMG to the table, it will throw error as unable to display the field on screen. why because it can able to display upto 255 char length only.
For this requirement you have 2 solutions :
1) Create multiple fields and your Z table, split the data and store them as required.
2) Create a TEXT ID and store it as a long text using FM CREATE_TEXT.
or
This type of text should be treated as Long Text.
And the steps are:
1. Create Text Object Using SE75.
2. Create Text ID Using SE75.
3. Now you have to Save the text with FM SAVE_TEXT.
For example:
The Most simple solution for it can be that Divide the field REMARKS of size 1000 in multiples of 200 characters like REMARK1, REMARK2....REMARKn.
Now you can create two FMs :
zset_data: To Store 1000 char long data in Table
Here you will divide the data of Variable (type char1024) in multiples of 200 and will store in REMARK1, REMARK2.....
zget_data: To Get 1000 char long data back from Table
Here you will concatenate REMARK1, REMARK2..... and will store in Variable of Type char1024.
This is the best solution if Table is not going to be maintained by Table Maintenance Generator.
regards,
ravi

ALV Cell with more than 255 characters.

Hello Guru's,
I need to display a longtext in ALV with other details. I am using READ_TEXT to get the Longtext and appending it to Internal table field, which i have defined as a string. I have debugged the code and it is containing around 450 characters. But, when i am trying to display using "REUSE_ALV_GRID_DISPLAY" it is only displaying 255 characters.
Please suggest a solution.
Thanks,
Sudhir.

Sap provides a set of ALV (ABAP LIST VIEWER) function modules which can be put into use to embellish the output of a report. This set of ALV functions is used to enhance the readability and functionality of any report output. Cases arise in sap when the output of a report contains columns extending more than 255 characters in length.
In such cases, this set of ALV functions can help choose selected columns and arrange the different columns from a report output and also save different variants for report display. This is a very efficient tool for dynamically sorting and arranging the columns from a report output.
The report output can contain up to 90 columns in the display with the wide array of display options.
The commonly used ALV functions used for this purpose are;
1. REUSE_ALV_VARIANT_DEFAULT_GET
2. REUSE_ALV_VARIANT_F4
3. REUSE_ALV_VARIANT_EXISTENCE
4. REUSE_ALV_EVENTS_GET
5. REUSE_ALV_COMMENTARY_WRITE
6. REUSE_ALV_FIELDCATALOG_MERGE
7. REUSE_ALV_LIST_DISPLAY
8. REUSE_ALV_GRID_DISPLAY
9. REUSE_ALV_POPUP_TO_SELECT

Can't read E-mail address with more than 25 characters

Similar Messages

Maybe you are looking for