Can´t read mass storage devise on MacbookPro, is able to read it on PC with windows

See heading

It sounds like you may have multiple problems, but none of them are likely to be caused by malware.
First, the internet-related issues may be related to adware or a network compromise. I tend to lean more towards the latter, based on your description of the problem. See:
http://www.adwaremedic.com/kb/baddns.php
http://www.adwaremedic.com/kb/hackedrouter.php
If investigation shows that this is not a network-specific issue, then it's probably adware. See my Adware Removal Guide for help finding and removing it. Note that you mention AdBlock as if it should have prevented this, but it's important to understand that ad blockers do not protect you against adware in any way. Neither would any kind of anti-virus software, which often doesn't detect adware.
As for the other issues, it sounds like you've got some serious corruption. I would be inclined to say it sounds like a failing drive, except it sounds like you just got it replaced. How did you get all your files back after the new drive was installed?
(Fair disclosure: I may receive compensation from links to my sites, TheSafeMac.com and AdwareMedic.com, in the form of buttons allowing for donations. Donations are not required to use my site or software.)

Similar Messages

  • How can i disable mass storage

    I am working in a Media Company with about 40 numbers of MAC PCs (I-Mac & Mac Pro).
    Here data security is very much important factor in our job profile.
    In Windows based PCs I have blocked the USB Devices.
    But in MAC I am becoming unable to block the USB Device.
    I wish the Key-Board and Mouse to work, only the Pen Drives, USB based HDDs are to be stopped.
    Hope a Quick Solution will come to take me out from this problem.
    Thanks and Regards,
    Ajit Satapathy,
    IT Head,
    Kanak TV.
    Bhubaneswar,
    ODisah - 751010.

    In the /System/Library/Extensions/ folder is the extension related to mass storage via USB:
    IOUSBMassStorageClass.kext
    If you rename it that should do what you want.  You will have to use the Terminal application in the Utilities folder.  Open Terminal and at the prompt enter:
    cd /System/Library/Extensions
    sudo mv IOUSBMassStorageClass.kext IOUSBMassStorageClass.kext.bak
    Press RETURN after each line. You will be prompted to enter your admin password which is not echoed.
    You must restart after making the above change.

  • How can i connect mass storage my iphone 3g to my laptop

    How can i transfer my songs in iphone 3g by my laptop ?  I try to connect iphone as mass storage but it couldn't work???

    Choose the User Guide for the version of iOS on your phone here: http://support.apple.com/manuals/#iphone

  • I can't read a pdf file with apercu

    I've updated apercu a few days ago. Since I did it, I can't read pdf file anymore. what can I do ?

    Can you please share the file with us at [email protected]? Also, can you please confirm that you are viewing the PDF in the Adobe Reader app rather than an app like dropbox, Mail or Safari?

  • Can I read Gujarati Language in my Windows Mobile ( Sony Ericsson Aspen, M1i)?

    I have sony Ericsson Aspen (Windows Mobile)
    I want to download This apps but I want to know that is can i read Gujarati in this browser (such as Gujarati news paper etc)?

    See [[Will Firefox work on my mobile device?]]

  • How can I make the new update more colorful my mother can't read the white pages with tiny lines we hate it

    How can get the color back on my iPad 2 retina  my mother can not read the new white pages with tiny line or the text messages

    You can go into the settings and make the fonts bigger, also in the accessibility, make the contrast better and fonts bolder.
    There is also the 'invert colors' but it's not the best thing since it inverts everything.
    unfortunately this doesn't seem to be a good update for those with visual issues.
    http://www.apple.com/feedback/
    You can let Apple know. They won't answer but at least you can be added to the talley of those that have issues.

  • My CDROM can`t read some dvd after changing windows

    hi,i have hp probook 450 g1 , i had windows 8.1 but i had some problems so changed my windows and install windows 8.1.1 i install all of my drivers but after i change my windows the CDROM can`t read some DVDs specially DVD9 and the sound of CDROM is changed and it`s strange for such this DVD that it can`t read it reads them some times , but most of the time can`t read , it make me crazy , please help me 

    Hi Yolanda,
    the error message is inside a popup: (French trnaslation) "Windows media Player encountered an error and will close." I have the choice beetween "CLOSE" and "HELP ON THE WEB".
    Of course the "help" is totally useless....
    I don't see any troublshooter related to "media player". The only troubleshooter where I can choose Media player is for the "compatibility mode", so it's not helpful. On the "audio and devices" troubleshooter I see "read
    a DVD with Windows Media Player", but that's not my case.
    I've already done the last step. I copy the MP3 from my second computer to the "problematic" one, and I can't read my file. But, on the second computer, i can read this MP3 so the issue is ONLY when I try to read this file with my Windows session.
    (in the same computer, with the administrator session, I can read all the files).
    To put it in a nutshell:
    on computer A logged as CEDRIC i can not read the mp3 called SUPERSONG (it's an example lol)
    on computer A logged as administrator, I can read the SUPERSONG
    on computer B logged as CEDRIC (other local account but same name) I can read the SUPERSONG mp3 that is present in the music Library (that is not the same file, but it's a file with the same name, and of crouse this is the same song). (all my MP3 are copied
    from computer A to computer B in case of failure on one of the computers)
    on computer A logged as CEDRIC, if I do a
    \\computerB\c$\...\SUPERSONG I can not read it.
    I know this is complicated to explain, but if I ask to the Microsoft community that is because I don't know what to do ;) ;) ;) 

  • Can I get an older release of Firefox? 36.0 does not play well with Windows 7.

    Firefox 36.0.4 does not play well with Windows 7. If it opens at all, it freezes within a minute so the screen goes pale and I get the classic spinning circle of death. Then the header says (not responding).
    Ideally I would like to drop back to version 32 or 33, but 34 and 35 had fewer problems.
    Can I find older versions anywhere?

    You can [[Install an older version of Firefox]] any time. But which will cause significant security risk. So If you can't use the latest version of Firefox, we recommend that you use the latest version of another browser.
    If the latest version of Firefox is causing problems for you or you just don't like something about it, please give us feedback about it here:
    [https://input.mozilla.org/en-US/feedback/ Submit your feedback and suggestions about Firefox]
    Anyway head for the ftp for older version but please be careful with these: ftp://ftp.eu.mozilla.org/pub/firefox/releases/

  • Reader 11.0 incompatible with windows 7

    I downloaded reader 11.0 onto my windows 7 computer.  It already had reader 5.0 on it.  when i try to open a document, I get a message on incompatibility and will not allow me to open it.  what should I do?

    There is no such Reader version; the latest version is 11.0.3.  What exactly means "stops working"?  Some things to try...
    Using Windows Explorer navigate to C:\Program Files (x86)\Adobe\Reader 11.0\Reader, then double-click on Eula.exe and accept the license agreement
    Can you open Adobe Reader by itself?  If so, try disabling Protected Mode [Edit | Preferences | Security (Enhanced)].
    If you cannot open Reader by itself, try to disable Protected Mode in the registry; download, unzip, then run the attached registry script
    It could even be a malware issue; see http://helpx.adobe.com/acrobat/kb/reader-core-dll-error.html

  • How do I fix Reader XI compatability issues with Windows 7 Home Premium?

    Compatability issues are keeping me from being able to open pdf files using Acrobat Reader XI.  I have Windows 7 Home Premium and am using Webroot Security.  It is telling me to try unprotected mode, but I would like to be able to use protected mode.  Any way to fix this?

    M Ben wrote:
    all of my option under file and edit are darked out.
    All menu options in Reader DC are very faint compared to earlier Reader versions or other programs.  You should still be able to click Preferences on the Edit menu:

  • How to Install adobe reader on Samsung product with Windows RT

    Hi, I have an Samsung ATIV but with windows RT but cant always read flash. How do I install adobe?
    Many Thanks
    Karl Nilsson
    [email address removed]
    Message was edited by: Truckcentralen

    So is your problem with Adobe Reader, or Flash?
    P.S. this is a public forum; please do not post your email address!

  • Reading list on safari with Windows 7

    Hi,
    I installed safari on my computer running with windows 7.
    I was thinking that the reading list will be the same on my Ipad, Iphone and on my safari on my windows computer, that the case ?
    Because if i correct and its suppose to be the same everywhere, but its not working on my computer with windows 7.
    It work perfectly on my Ipad, Iphone.
    Could you help my with that little case ?
    Thanks a lot.
    Martin

    Go to: Safari>click on the book icon (right hand corner)>go to your reading list (the glasses) slide your finger from the right to the left on each reading list page>then click delete.
    -Cheers,
              Alec
    Huh1 wrote:
    How do you delete or clear something in the reading list on ipad ios7?

  • I can't read the pdf documents with iBook in my MacBookPro. The documents can't be opened. Please, help me

    I have more than 2500 pdf documents in my MacBookPro, but I can't open them with iBooks. I don't know what happens. The iBooks worked properly until my upgrade to Yosemite. Is now a problem using Yosemite?

    Same issue! I open my PDF in iBooks 1.1, but it open with Preview.
    I like to read ebook with iBook, please fix the bug.

  • How can I read generic-type object with object stream?

    I declared a class like this
    class Storage<K extedns Key, D extends Data> implements Serializable {
    class Key implements Serializable {
    interface Data extends Serializable {
    }and I used ObjectOutputStream to save.
    Storage<MyKey, MyData> storage = new Storage<MyKey, MyData>();
    ObjectOutputStream out = new ObjectOutputStream(new FileOutputStream(new File("file")));
    out.writeObject(storage);after save code, I tryed to write loading code like
    ObjectInputStream in = new ObjectInputStream(new FileInputStream(new File("file")));
    Storage<MyKey, MyData> storage = (Storage<MyKey, MyData>)in.readObject();but, it occurs a casting error. How can I downcast my Object object to Storage<MyKey, MyData> object?

    Gone are the days where one could achieve completely warning free code, it seems since generics has arrived. Is this an ideal compilation environment? What about the rest of us developers that have molded our processes into such where the resulting code compiled without deprecation warnings and all other such warnings? Why does it make us feel as though we're doing something wrong when we suppress a warning, when we really aren't because we know what we are suppressing? why doesn't it feel as squeaky clean as it once did? Are there plans to deal with this in the future or is this how we proceed to develop from now on?

  • How can I read a blob created with ole container in forms 6i in forms 10g

    In forms 6i I used ole container to save a document (excel, pdf, word...) into a blob column.
    I want to migrate my application in forms 10g and I read that I have to use webutil_File_transfer.db_to_client and after webutil_host.blocking to see the document.
    In the same blob column I can have multiple type of document. How Can I know wich application to use to open the document ?
    Even if I know the extension of my document I'm enabled to open the file ???

    When you click a C/S OLE object, it is opened with its default application's owner, no ?
    So if the OLE object is opened by Excel, the extension is .xls.
    In any case you have to open the OLE object with its "mother" application if you want to save it as a file, so there is no problem at all to decide with extension to use.
    If you read this article : http://sheikyerbouti.developpez.com/webutil-docs/Webutil_store_edit_docs.htm you can see that the filename is automatically opened with the corresponding application.
    Francois

Maybe you are looking for