Can't read my post

When I click on my post about dbca scripts, which I posted yesterday, I get the error:
Discussion Forums Error
"The reqeusted message was not found."
Has this happened to anyone else?
Thanks

For few weeks now, Oracle seems to make few changes on the forums and now they r totally bugged !? :-(
Fred

Similar Messages

Can't read previosuly posted blog entry

I posted about 8 entries and can't read the first 2 on the internet, but can read them on my iweb. does anyone know why this is?

The Inspector is probably the most important tool in iWeb. Best to get familiar with it as it holds the key to most of iWeb's features.
Here's a screenshot of the various Inspector panes:
Click to view full size
OT

Can I hide the "read only" posts

Can I hide the "read only" posts? that always appear at the top of other threads because it's a pain having to scroll down past them each time to get to the normal threads.
Regards,
Frogman

If you make sure you're signed in whenever you visit the forums, each thread on a board will show the number of new posts since the last time you visited the thread. If you then click on that number you will be taken straight to the first of the unread posts. For example this from the BB Speed/Connection board shows eight new posts since I last looked at the thread; clicking the figure 8 goes to the first of them.
Not quite what you were looking for but it's a help.
You can click the white star next to this message if you think it was helpful.

Windows Easy Transfer (WET) Issues with External Hard Drive - "Can't read from the source file or disk"

I work for Office Depot, in the tech department. Basically, one of our associates was supposed to do a data backup, and re-install Windows 7, then transfer the files back. He used Windows Easy Transfer and compacted everything into a 163 GB file.
Now comes the hard part. When we try to put it back on his computer ((drag-and-drop to the desktop) which has been wiped back to factory settings using the recovery partition), it stops at 79.5 GB remaining (you know how it doesn't give you a % of completion,
it just shows how many GB are remaining) and then says "Can't read from the source file or disk" and gives you an option to try again, or cancel. It gets hung up on the same point each time.
Normally, this wouldn't be a huge issue, but the contents on the drive are his wife's architect blueprints and interior design stuff, along with wedding photos, etc, which are the only copies they have. On top of those, they have court documents and other
important files that we are unable to access now.
I wasn't involved with this transfer, so I'm trying to clean up the mess as best I can. I remembered that the customer's wife was Russian, and had some files typed with a Russian keyboard, so on and so forth. I wonder if that's the issue? If not, I really
have no idea how to manually extract things from a ".mig" file, or how to diagnose what area is potentially corrupted.
In light of this situation, we tried using "Recuva" to recover the files post-wipe, but everything was corrupted or unable to be opened, and it also extracted and recovered all of the "useless" photos, such as the skype logos, up and
down arrows for browsers, etc (it was 160,000+ photos).
Trying to avoid a potential lawsuit, unhappy customer, and costing the company lots of money to see if professionals can get into this external hard drive.
Other relevant information:
We used a Toshiba 500 GB (465 GB) external hard drive.
Customer's computer is an HP Pavilion P6000 Series (Model No. p6520y) running Windows 7 Home Premium 64-bit Service Pack 1.
Any other information that is needed can be provided, thanks in advance, and hopefully we can find a solution to this issue quickly!
-John

I think there's a lack of understanding somewhere.
"If you even can't start the process, please unplug it from your new PC. Then head back to your new computer and plug
the external drive back in to your new computer. "
Unplug from new, head back to new, plug it back in? That doesn't make much sense! Haha.
I knew what you meant though, somewhat. When I search through the drives after clicking yes (Has windows easy transfer
already saved your files blah blah blah) I click on the transfer file and it says "Windows Easy Transfer could not open the file".
Rather than drag-and-drop the file to the desktop, I now tried to double-click on the file itself while it was plugged
into the computer. It opened, and it started transferring until it was about 70% completed, and then an error popped up saying "WET can't open the easy transfer file, make sure your USB device is plugged in or check your internet connection".
I checked, and the USB hard drive's light wasn't on. Now, I unplug it and plug it back in, and the light comes back on,
so I click Retry, and it resets the bar back to nothing and says "Transfer time: 1 minute".
Rather than continue trying, I clicked "Cancel" instead of Retry, and it says "Your transfer did not complete successfully."
It says to click "view report" for more information, but there's no "view report button".
At the moment, I am scanning the External Drive for bad sectors using the check disk tool in properties. It's frozen
at "0 USN bytes processed".

ICal Bug?-Can't read overlapping appointments

I just upgraded to Lion and the new calendar is annoying me. Can someone tell me if
this is a bug or if I'm doing something wrong? I have a lot of overlapping appointments,
and in the old calendar I could just click on whichever one I wanted to read and it would
pop to the front. Now when I click a buried appointment the color gets darker indicating that
it is selected, but it does not pop to the front and as a result I can't read the text! Has
anyone else seen this and know what to do about it?
Thanks,
Diane

Check out this post ... https://discussions.apple.com/thread/3198235?start=0&tstart=0

Formatting issues: when I open a msg, the font is sooo small you need a magnifier to read it. How can I set the font size to one I can easily read?

== Issue
==
I have another kind of problem with Firefox
== Description
==
I have various formatting issues:
a. When I open a msg from my web browser (Cablevision), the font is sooo small I need a magnifier to read it. How can I set the font to a size I can easily read?
b. When I forward msgs, the text gets all distorted and I need to clean it up (some symbols, lots of spaces between words). How can this be fixed?
c. When I want to tell someone about a website, I cannot type the URL in so that all they have to do is click on it. How can this be fixed?
d. When I open messages, the text opens in a small window and covers the "Show Images" button. Why?
== This happened
==
Every time Firefox opened
== Ever since I started using Firefox (a few months ago)
==
'''Troubleshooting information'''
I didn't find any results
== Firefox version
==
3.6.3
== Operating system
==
Windows 7
== User Agent
==
Mozilla/5.0 (Windows; U; Windows NT 6.1; en-US; rv:1.9.2.3) Gecko/20100401 Firefox/3.6.3
== Plugins installed
==
*-nphpclipbook
*Office Plugin for Netscape Navigator
*The QuickTime Plugin allows you to view a wide variety of multimedia content in Web pages. For more information, visit the QuickTime Web site.
*Default Plug-in
*Adobe PDF Plug-In For Firefox and Netscape "9.3.2"
*NPRuntime Script Plug-in Library for Java(TM) Deploy
*The Hulu Desktop Plugin allows Hulu.com to integrate with the Hulu Desktop application.
*Shockwave Flash 10.0 r45
*Adobe Shockwave for Director Netscape plug-in, version 11.5
*iTunes Detector Plug-in
*3.0.40624.0
*NPWLPG
*Next Generation Java Plug-in 1.6.0_20 for Mozilla browsers

The text editor is the text area that you use on the webmail (Yahoo, Hotmail) website to create a new mail.
You can compare that with the ''Post new message'' text area that you use to create a new post on this forum.
Just above the text area that you use to enter the message text there is usually a button bar with buttons that allows some text formatting like Bold and Italic and can also include a button to make a clickable hyperlink.
Check the tooltip of each button by hovering with the mouse over each button.
Make Link - https://addons.mozilla.org/firefox/addon/142

How can I read a binary file stream with many data type, as with AcqKnowledge physio binary data file?

I would like to read in and write physiological data files which were saved by BioPac�s AcqKnowledge 3.8.1 software, in conjunction with their MP150 acquisition system. To start with, I�d like to write a converter from different physiodata file format into the AcqKnowledge binary file format for version 3.5 � 3.7 (including 3.7.3). It will allow us to read different file format into an analysis package which can only read in file written by AcqKnowledge version 3.5 � 3.7 (including 3.7.3).
I attempted to write a reader following the Application Note AS156 entitled �AcqKnowledge File Format for PC with Windows� (see http://biopac.com/AppNotes/ app156Fi
leFormat/FileFormat.htm ). Note the link for the Mac File format is very instructive too - it is presented in a different style and might make sense to some people with C library like look (http://biopac.com/AppNotes/ app155macffmt/macff.htm).
I guess the problem I had was that I could not manage to read all the different byte data stream with File.vi. This is easy in C but I did not get very far in LabView 7.0. Also, I was a little unsure which LabView data types correspond to int, char , short, long, double, byte, RGB and Rect. And, since it is for PC I am also assuming the data to be written as �little endian� integer, and thus I also used byte swap vi.
Two samples *.acq binary files are attach to this post to the list. Demo.acq is for version 3.7-3.7.2, while SCR_EKGtest1b.acq was recorded and saved with AcqKnowledge 3.8.1, which version number is 41.
I would be grateful if you someone could explain how to handle such binary file stream with LabView and send an example to i
llustrate it.
Many thanks in advance for your help.
Donat-Pierre
Attachments:
Demo.acq ‏248 KB
SCR_EKG_test1b.acq ‏97 KB

The reading of double is also straight forward : just use a dble float wired to the type cast node, after inverting the string (indian conversion).
See the attached example.
The measure of skin thickness is based on OCT (optical coherent tomography = interferometry) : an optical fiber system send and received light emitted to/back from the skin at a few centimeter distance. A profile of skin structure is then computed from the optical signal.
CC
Chilly Charly (aka CC)
E-List Master - Kudos glutton - Press the yellow button on the left...
Attachments:
Read_AK_time_info.vi.zip ‏9 KB

How can I read the bootstrap files and extract the fragment-URLs and fragment-numbers in plain text?

How can I read the bootstrap files of any HDS Live stream and extract the fragment-URLs and fragment-numbers in plain text?
Could it be that it is some kind of compressed format in the bootstrap? Can I uncompress it wirh f4fpackager.exe? Could not find any download for f4fpackager.exe. I would prefere less code to do so. Is there something in Java of JavaScript, that can extract the fragment-numbers?
Thank you!

Doesn't sound too hard to me. Your class User (the convention says to capitalize class names) will have an ArrayList or Vector in it to represent the queue, and a method to store a Packet object into the List. An array or ArrayList or Vector will hold the 10 user objects. You will find the right user object from packet.user_id and call the method.
Please try to write some code yourself. You won't learn anything from having someone else write it for you. Look at sample code using ArrayList and Vector, there's plenty out there. Post in the forum again if your code turns out not to behave.

Help required please. "Itunes can not read the contents of my iphone"

Greetings all,
I know this question has been asked before and I apologize for asking again but all the solutions provided don't seam to work for me, can anyone help me please.
I am receving the message: "Itunes can not read the contents of the iPhone. Go to the summary tab In iPhone Preferences and click restore torestore this Iphone to factory settings".
Now a little about my iphone, Itunes and my laptop and what steps i havealready tried.
I have an iPhone 4 running software 5.0
My itunes version is 10.5.0.142
I know these are not the most up to date versions but I have had this issue for almost 3 months now and updating the software back then was the first step I tried. I don’t believe updating to the latest will fix this issue as updating the last two times did nothing.
Every so often after starting Itunes, The program will stop responding and will require the three finger death kill (CTRL, ALT, DELETE) to open task manager to end the task of Itunes. Once it shuts down, I restart the iTunes and it runs smoothly, apart from not reading my iPhone.
When I run a diagnostic in itunes under the help tab, I get these fail messages:
Network Connectivity test: Secure link to Itunes store fail
Device connectivity test: Under support services: Itunes helper is not running. And under ports: No iPod, iPhone or iPad found.
Device Sync test: No iPod touch, iPhone or iPad found.
*See below for full diagnostic report*
I have restored back to factory settings twice.
I have shut down and restarted both my iPhone and laptop.
I am running Windows 7 32-bit on my laptop.
I am using ZoneAlarm as my fire wall, and have been disabling it when syncing my iPhone to prevent other error messages.
The iPhone is plugged into a genuine Iphone USB cable and is plugged into a USB port not a USB hub on my laptop, I have tried plugging it into all 4 USB ports and this issue still persist. The Cable is less then 5 months old, is not frayed or damaged in any way, have also borrowed 2 other cables from friends and still the same issue.
The iPhone does not even come up in windows explorer as a digital camera.
The iPhone is NOT jailbroken
I do not live close to a so called genius bar, however I have made the journey to them on 3 separate occasions last year when I first received my iPhone for a different issue, the so called genius's could not fix the problem so they just gave me a new (refurbished) iPhone, which did not extend my warranty. I will not be taking the iPhone back to them as I believe they can not resolve many issues, this is why I am reaching out to the power of the people in the wider apple community.
I have read in other forums about ifunbox and other programs for jail broken iPhones to isolate folders “iTunesDB” and "iTunesCDB" and delete them. If this is the issue is there a way to access these files through windows explorer as my iphone is not jailbroken.
I hope I have provided enough information and someone can help me fix this issue. If I have left anything out, please let me know. I thank everyone in advance for your patience and support.
Thanks
Hoggie27
FULL DIAGNOSITC REPORT
Microsoft Windows 7 Home Premium Edition Service Pack 1 (Build 7601)
Hewlett-Packard HP Pavilion dv6 Notebook PC
iTunes 10.5.0.142
QuickTime not available
FairPlay 1.13.35
Apple Application Support 2.1.5
iPod Updater Library 10.0d2
CD Driver 2.2.0.1
CD Driver DLL 2.1.1.1
Apple Mobile Device 4.0.0.96
Apple Mobile Device Driver 1.57.0.0
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 1.9.3.494
Gracenote MusicID 1.9.3.106
Gracenote Submit 1.9.3.136
Gracenote DSP 1.9.3.44
iTunes Serial Number 001BAD14XXXXEA78
Current user is an administrator.
The current local date and time is 2011-11-16 10:04:53.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is supported.
Core Media is supported.
Video Display Information
NVIDIA, NVIDIA GeForce GT 230M
**** External Plug-ins Information ****
No external plug-ins installed.
The drive H: Vodafone USB SCSI CD-ROM Rev USB is a USB 1 device.
**** Network Connectivity Tests ****
Network Adapter Information
Adapter Name:    {97524DB0-B9DC-41DB-8AFA-0CE6938F7C95}
Description:    PC
IP Address:    (HAS BEEN REMOVED FOR PERSONAL REASONS)
Subnet Mask:    255.255.255.255
Default Gateway:    0.0.0.0
DHCP Enabled:    No
DHCP Server:
Lease Obtained:    Thu Jan 01 11:00:00 1970
Lease Expires:    Thu Jan 01 11:00:00 1970
DNS Servers:    10.143.147.147
        10.143.147.148
Adapter Name:    {BFF0456E-DE42-4FEF-B1FA-1EA1C5EDEE42}
Description:    Vodafone Mobile Broadband Network Adapter (ZTE)
IP Address:    0.0.0.0
Subnet Mask:    0.0.0.0
Default Gateway:    0.0.0.0
DHCP Enabled:    No
DHCP Server:
Lease Obtained:    Thu Jan 01 11:00:00 1970
Lease Expires:    Thu Jan 01 11:00:00 1970
DNS Servers:
Adapter Name:    {D5511FFD-0CA8-4F62-B3CA-E90384FFCD03}
Description:    Broadcom 43225 802.11b/g/n
IP Address:    0.0.0.0
Subnet Mask:    0.0.0.0
Default Gateway:    0.0.0.0
DHCP Enabled:    Yes
DHCP Server:
Lease Obtained:    Thu Jan 01 11:00:00 1970
Lease Expires:    Thu Jan 01 11:00:00 1970
DNS Servers:
Active Connection:    PC
Connected:    Yes
Online:        Yes
Using Modem:    Yes
Using LAN:    No
Using Proxy:    No
SSL 3.0 Support:    Enabled
TLS 1.0 Support:    Enabled
Firewall Information
Windows Firewall is on.
iTunes is NOT enabled in Windows Firewall.
ZoneAlarm Firewall is installed.
Connection attempt to Apple web site was successful.
Connection attempt to browsing iTunes Store was successful.
Connection attempt to purchasing from iTunes Store was successful.
Connection attempt to iPhone activation server was successful.
Connection attempt to firmware update server was unsuccessful.
The network connection timed out.
Connection attempt to Gracenote server was successful.
Last successful iTunes Store access was 2011-11-16 09:59:57.
**** CD/DVD Drive Tests ****
LowerFilters: Afc (1.0.0.2),
UpperFilters: GEARAspiWDM (2.2.0.1),
F: hp CDDVDW TS-L633N, Rev 0300
Drive is empty.
**** Device Connectivity Tests ****
iPodService 10.5.0.142 is currently running.
iTunesHelper is currently not running.
Apple Mobile Device service 3.3.0.0 is currently running.
Universal Serial Bus Controllers:
Intel(R) 5 Series/3400 Series Chipset Family USB Enhanced Host Controller - 3B34. Device is working properly.
Intel(R) 5 Series/3400 Series Chipset Family USB Enhanced Host Controller - 3B3C. Device is working properly.
FireWire (IEEE 1394) Host Controllers:
1394 OHCI Compliant Host Controller. Device is working properly.
Most Recent Devices Not Currently Connected:
iPhone 4 (GSM) running firmware version 5.0
Serial Number:    85107XQLA4S
**** Device Sync Tests ****
No iPod, iPhone, or iPad found.
< Edited By Host >

Hi AM_Kidd.
Thanks for your reply.
I have done a complete uninstall and re install of iTunes and all related apple programs from my laptop through control panel, add remove programs and also by going through program files and deleting all tracers of any left over folders remove programs may have missed.
My apologies for forgetting to add this in my original post.
Thanks again

Can't read or write from Raid

Hi all,
I'm new to the Xserve RAID world, and I'm hoping someone out there can help. We've been using the RAID with one computer for about 4 or 5 months now and it has worked great. We finally got all the equipment in to connect it to the other two macs we have and have it hooked up via fibre channel and all the computers can see it and view what's on it.
The problem I'm having is actually reading or writing anything to the RAID. I can't write anything to the RAID and it seems like I can't read anything either, but sometimes it does allow me to read something. The error message I get when I try to write something reads "The Finder cannot complete the operation because some data in '[File Name]' could not be read or written. (Error Code -36)". I also get something else
It sounds like a permissions problem, but whenever I check the permissions, but says that my current user is the owner and has read and write access.
One thing I should mention is that one of the Mac Pro's is running OS X Server, but I haven't done anything with the server software yet, it's only running final cut and CS3 at the moment. But, I didn't know if it might have a tool or have done something I'm unaware of.
I hope that's enough information, if not, let me know and I'll answer any questions you have.
Thanks,
Danny

+We finally got all the equipment in to connect it to the other two macs we have and have it hooked up via fibre channel and all the computers can see it and view what's on it.+
Are you saying that all the computers have access to all the same files at the same time over fibre channel? If so that's your problem. You should really never do this because there is NO arbitration about file access. If two computers access the same file at the same time file corruption and data lose will occur. This is the equivalent of having a SCSI harddrive attached to two computers at once while both have control.
The proper way to approach this is partition the RAID up so each computer has it's own section, or to make one computer the server and have it share out the disk over ethernet (AFP, SMB etc) and do the arbitration that way.
The only way to give all computers full access to the same files on the same drive at the same time over fibre is through a SAN system like XSAN. In that case the SAN provides the needed file arbitration.
If I've misunderstood about your set-up ignore this post.
Hope that helps,
=Tod

Can't read airport express base station configuration wirelessly

The setup:
2TB time capsule that takes the ethernet feed from the cable modem for internet access.
Airport express 802.11g plugged into speakers for Airtunes. No ethernet connection, just a wireless network.
The problem:
I can only read the airport express base station configuration when the mac is plugged into the time capsule by ethernet cable. This does not happen with the other mac I have on the network. It can connect to both the time capsule and the airport express without any problems. So unless I'm plugged in, iTunes and airtunes doesn't connect to the base station, and neither can Airfoil 3.5 or Airport Utility. Airport Utility does see the airport express. It just doesn't read the configuration wirelessly.
I think this had something to do with elgato eyetv not liking airfoil, but I can't say for sure.
Any thoughts?

When I switch it on all three lights flash, but then after a while the middle one stays on and nothing happens.
You posted in the AirPort Express area, but it sounds like you have an AirPort Extreme Base Station (AEBS)--correct?
If so, let's start by performing a complete power recycling of your network components to make sure that the BT Voyager router "recognizes" the AEBS.
Modem/Router Power Recycling - Quick
- Power-off the BT Voyager modem, AEBS, & computer(s); Wait at least 5 minutes.
- Power-on the BT Voyager modem; Wait at least 5 minutes.
- Power-on the AEBS; Wait at least 5 minutes.
- Power-on the computer(s)
If this fails to get the modem to "recognize" the Internet router, then try the "Full" version.
Modem/Router Power ReCycling - Full
- Power-off the BT Voyager modem, AEBS, & computer(s). (Wait at least 30 minutes. If possible, leave the modem off overnight.)
- Power-on the BT Voyager modem; Wait at least 30 minutes.
- Power-on the AEBS; Wait at least 5 minutes.
- Power-on the computer(s)

Help, I can't read or write DVDs

I bought a Mac Pro 2.66 2 weeks ago and I just tried burning a DVD. It turns out my Sony D150A can't recognize any of my (ironically) blank Sony DVD-R discs. Not only doesn't it recognize blank media, but it also doesn't recognize any DVDs burned with my MDD G4. DVDs burned with my MDD G4 work fine in both it and my Powerbook G4 titanium.
I've read several posts about people having trouble with their SONY D150's. I tried setting the finder preference to open DVDs in the finder as someone suggested. Well, when I do that it shows up as a blank CDR - not a DVD! I also tried another person's suggestion and zapped the PRAM. It didn't work.
Has anyone come up with a solution for this problem yet?
Mac Pro 2.66Ghz Mac OS X (10.4.8) 3GB RAM, ATI x1900

Hey All, just an update and a fix for my problem.
I took my MacPro to an Apple Store, and he tried some of the DVD's I was having trouble with on some of the Mac Pros in the store. All the Mac Pros with Sony DVD drives had the same problem I was experiencing. One of the Mac Pros in the store had the Pioneer DVR-111D drive and the discs read just fine! They also read fine on one of the store's macbooks.
The Macgenius there suggested I contact Apple Care and specifically request a Pioneer DVD drive to replace my Sony. I did that, and Apple sent me another Sony drive! So I called Apple Care back and explained my problem yet again. They claimed they can't request a replacement part by a certain manufacturer, only the part itself.
Given the Pioneer DVD drive worked for me at the Apple Store, I went to newegg.com and purchased the same drive (Pioneer DVR-111D) from them and everything works perfectly. And as the previous poster said, burning is fully supported with this drive.
So, if you are having trouble with your Sony DVD drive, this is a reasonable solution. The drive only cost $33.00 and it came in three days.
I hope this is useful to someone!
Cheers!
Mac Pro 2.66Ghz Mac OS X (10.4.8) 3GB RAM, ATI x1900

What do you do when you can't read the code on a iTunes gift card?

What do you do when you can't read the code on a iTunes gift card? I tried taking it back to the store with my reciept, but they said I would have to contact Apple support. Am I out just out $25 dollars?

See this support article:
http://support.apple.com/kb/TS1292
Instructions are at the bottom of that article.
BTW, this forum is for questions about iTunes U, Apple's service for colleges and universities to post educational material in the iTunes Store. Normally you want to ask your questions in the general iTunes forums.
Regards.

In xml file taglib tag can't read in myEclipse

My source code of web.xml
<?xml version="1.0" encoding="UTF-8"?>
<web-app xmlns="http://java.sun.com/xml/ns/j2ee" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" version="2.4" xsi:schemaLocation="http://java.sun.com/xml/ns/j2ee   http://java.sun.com/xml/ns/j2ee/web-app_2_4.xsd">

<servlet>
    <servlet-name>action</servlet-name>
    <servlet-class>org.apache.struts.action.ActionServlet</servlet-class>
    <init-param>
      <param-name>config</param-name>
      <param-value>/WEB-INF/struts-config.xml</param-value>
    </init-param>
    <init-param>
      <param-name>debug</param-name>
      <param-value>3</param-value>
    </init-param>
    <init-param>
      <param-name>detail</param-name>
      <param-value>3</param-value>
    </init-param>
    <load-on-startup>1</load-on-startup>
</servlet>

<servlet-mapping>
    <servlet-name>action</servlet-name>
    <url-pattern>*.do</url-pattern>
</servlet-mapping>

    <welcome-file-list>
    <welcome-file>indexMini.jsp</welcome-file>
</welcome-file-list>

<taglib>
     <taglib-uri>/WEB-INF/struts-bean.tld</taglib-uri>
     <taglib-location>/WEB-INF/struts-bean.tld</taglib-location>
   </taglib>
    <taglib>
     <taglib-uri>/WEB-INF/struts-html.tld</taglib-uri>
     <taglib-location>/WEB-INF/struts-html.tld</taglib-location>
   </taglib>
<taglib>
     <taglib-uri>/WEB-INF/struts-logic.tld</taglib-uri>
     <taglib-location>/WEB-INF/struts-logic.tld</taglib-location>
   </taglib>
</web-app>Here under the 
the first tag
<taglib> can't read myEclipse.
Can you please help me?

Hello,
I have tried my best cleaning up the wiring, but it's still pretty messy. I attach the complete program.
My problem (still not solved) is that since EA needs to be measured at very high rate, I want to write it as binary data. But I cannot make it show me the correct data afterwards, with a different program, that doesn't matter.
I would also like to know how to convert this saved data to MatLab... any suggestions? (should I post this in a new thread?)
Regards,
Usuario
Attachments:
program_00.vi ‏297 KB

How to install adobe reader to my site [removed] so that pdf file can be read directly in my site instead of getting downloaded ?

How to install adobe reader to my site [spam link removed] so that pdf file can be read directly in my site instead of getting downloaded ?

Adobe Reader is installed on the client side, not on the web server.
Viewing PDFs online is a browser setting.
Please do not post any irrelevant links!

Can't read my post

Similar Messages

Maybe you are looking for