Can't read SLD from Integration Builder

Hi Experts,
When we select the option "Transfer from System Landscape Directory" and "Import Software Component Versions", we get the following error:
"Unable to read software component versions from System Landscape Directory".
If you have encountered this error in the past, please can you share the solution?
Thanks and regards,
Brendon

Hi Brendon,
Check it you have imported correctly the ESR content following one of the notes below
according to your system version:
PI 7.1X:
#1152640 - SAP NetWeaver 7.1 including EHP 1: Importing ESR content
XI 7.0:
#836200 - SAP NetWeaver 7.0: Importing Process Integration Content
XI 3.0:
#705541 - XI 3.0 (SP1 and higher): Importing XI Content
Regards,
Caio Cagnani

Similar Messages

How to import stuff from SLD to Integration Builder ?

Hi All ,
I have done all my definition and configuration in SLD - Product definiton, Technical System, Business system, SWCV , SWC , logical system - everything is in SDL.
When I go to' IB:design' and 'IB:config' I don't see anything I created in SLD?
I guess this is because the very next step should be to import all this stuff from SLD into Integration Builder.?.I read some posts on the forum but it is not clear where this is done :
1.should I do it first in IB:design or in IB:configuration ?
Can you please tell me how this is done technically and in what order - from wich menu and how?
2.And what is Enviroment->Clear SLD Data Cache used ? Do I have to use it and at which point?
Looking forward to your reply asap..Thanks all in advance..
Regards,
Boby

Boby,
If you do all the configuration in SLD only thing you have to import is the software component into Design and create your namespace and all the objects.
In Configuration you have to import your business systems and do all the routing rules.
Check this weblogs for step by step procedure for an end to end scenario:
/people/srinivas.vanamala2/blog/2007/02/05/step-by-step-guide-xml-file-2-xml-file-scenario-part-i
/people/srinivas.vanamala2/blog/2007/02/05/step-by-step-guide-xml-file-2-xml-file-scenario-part-ii
<i>
2.And what is Enviroment->Clear SLD Data Cache used ? Do I have to use it and at which point?</i>
If you change anything in IR and ID and this new changes do not reflect in your scenario then we do this normally.
Also check this document for all the caches in XI:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/c0332b2a-eb97-2910-b6ba-dbe52a01be34
---Satish

Test whether data can be read successfully from the SLD

1. Test whether data can be read successfully from the SLD
This test attempts to read the number of business systems defined in the SLD. If this attempt fails, the test is considered to have been unsuccessful. If no business systems are found, the system gives a corresponding warning.
Could you plz give the navigation steps to perform above test ??
thanks
kumar

Generally SLDCHECK is the transaction used to test the connectivity to the SLD from your R/3 system.
Use the function module LCR_LIST_BUSINESS_SYSTEMS to get the list of Buiness systems configured in SLD.
***Reward points if useful.
Regards,
Kiran Bobbala

Retrieving SLD and Integration builder username and pwd's

Hi,
I forgot my SLD and Integration builder username and pwds. my SLD pwd locked. Plz help me on this.
Thanks,
Satya

Hi Satish,
you can unlock your user and use the same user after unlocking.
Go to SU01 and unlock your user. If you dont have access to SU01 contact your Basis/Security team so that they could be able to do it for you.
Regards,
Naveen

When I was talking on phone, suddenly the phone was switched off. i tried to switch it on but it gave the message....connect to itunes for set up. when I connected it to itunes...it gave the message, itunes can not read data from this iphone, restore it

when I was talking on phone, suddenly the phone was switched off.
i tried to switch it on but it gave the message....connect to itunes for set up.
when I connected it to itunes...it gave the message, itunes can not read data from this iphone, restore it to factory settings. It also said while restoring ypu will lose all media data but you can restore the contacts.
I restored the factory settings....the phone was on recovery mode...it was verified by itunes and all that..but in the end it again said that iphone has some problem and can not function right now.
after that when ever i connect it with itunes, it gives the message, it can not activate the iphone further, try again later or contact customer service.
What to do now?????? Customer service people say..it is hardware problem

If it's a hardware problem, then the phone will need to be replaced.
There is no magic that can fix a hardware problem.

How can we read filenames from a specific folder

Hi forum,
I have a situation that, there are several files coming daily in a specific folder.
I want to read filenames from that folder and want to get that filename in a variable.
That filename contains account nos. which I need for further processing.
Now, how can we read filenames from a specific folder with using Oracle PL/SQL Procedure?
Please suggest.
Thanks & regards,
Kiran

If you are on 10g (not sure which exact release I'm afraid) you might look at Chris Poole's XUTL_FINDFILES that lists the files in a directory using PL/SQL and DBMS_BACKUP_RESTORE.SEARCHFILES (all a bit undocumented as it seems to be provided as part of rman).
The conventional (i.e. supported) approach is to use a Java stored procedure - there is an example on AskTom.
Message was edited by:
William Robertson

Why "Outlook Express" users can't read email from Mail.app ?

Why "Outlook Express" users can't read email from Mail.app ? Any explanation ? Select a good format,that's a good explanation,but i can't know each time if our recipients use "Outlook Express".

There are no completely bug free email clients including the Mail.app and Outlook has its share of bugs for such an old/mature email clients and some glaring ones that MS has been aware of for a long time but has chosen not to do anything about since these do not affect exchanging email with other Outlook users.
Outlook has always had problems with Mail's RTF and the degree depending on the Windows and Outlook versions used by the recipient.
Check this link.
http://homepage.mac.com/thgewecke/woutlook.html

EDGE SIMULATOR CAN'T READ DATA FROM SIMULATION.XML

HI,
i have installed the SES(10.1.3) and before that Application server 10.1.3 .
I have followed all the steps given at the following link
http://www.oracle.com/technology/obe/1013/fusion_middleware/integration/ses/configuringsimulator/configuresimulator.htm#t1
It works works well till step 16 and edge is restarted successfully , I exit from enterprise manager by logging out and then logging in again for edge
and then when i click on monitor events then it gives me nothing in the row( no data, no time , no id) just blank row...
Mean it does not read data from Simulation.xml file
my file (Simulation.xml) is residing in F:\oracleAS\10.1.3.1\OracleAS_1\j2ee\home\applications\edge\edge\config folder where 'edgerserver.xml' is residing.
edgeserver.xml contains all driver details i guess.
Can anyone help me to cope with the problem.
thanks :-)

Atlast i have overcome my problem , in order to read data from simulatin.xml file one has to change the "log level" in general settings to monitor and it will work .
other options for log level are , error , warning, notify and debug etc .
so change it to log level , then login as enterprise manager, restart edge , log out from emanagaer and again login to edge and click on monitor tab , u r done :-)

How can I read email from my aol account from my iphone and keep it as uread on my computer at home. It automatically goes to read mail on my computer. On my computer if I want to keep an email to answer later I can mark it "Keep as New".

How can I read my email from my aol account from my iphone and keep it as "unread" on my computer at home? At home I can read an email and if I want to get back to it at a later date I can mark it as "keep as new". I tend to forget it if it goes to "read" mail. Right now, when I read an email from my phone it goes automatically to "read" mail.

On the iPad, using the mail app, there is no way to do what you are asking without tapping the flag icon and marking the item as unread. Have you tried the OWA app for the iPad? It may have that functionality, but I haven't tested it as you need an Office 365 subscription with Exchange support to use the app.

Can not read data from URL!

Hello,
I want to read data from URL (http://84.100.130.82:8000/;stream.nsv). But can not do it. Because when try to call function openDataInputStream() shows this error: java.io.IOException: response does not start with HTTP it starts with: ICY. How I can fix this bug?
HttpConnection c = null;
InputStream is = null;
OutputStream os = null;
StringBuffer b = new StringBuffer();
String response,
responseLitle;
c = (HttpConnection)Connector.open(“http://84.100.130.82:8000/;stream.nsv”);
os = c.openOutputStream();
os.flush();
is = c.openDataInputStream(); // ERROR CODE HERE
int ch;
// receive output
while ((ch = is.read()) != -1)
b.append((char) ch);
response = b.toString();Regards, Ramunas

Hi, I�m trying to do the same as above, get MP3 from a Shoutcast server.
I got the same fault ("response does not start with HTTP it starts with: ICY") when I tried to open an HttpConnection as bellow:
============================================
HttpConnection conn = (HttpConnection) Connector.open("http://64.236.34.196/stream/1074");
Then I tried to open a socket connection as bellow:
======================================
SocketConnection conn = (SocketConnection) Connector.open("socket://64.236.34.196:80");
String get = "GET /stream/1074 HTTP/1.1";
DataOutputStream os = conn.openDataOutputStream();
os.writeUTF(get);
InputStream is = conn.openInputStream();
But then I got the following error:
=========================
java.lang.SecurityException: Target port denied to untrusted applications
Could someone help me to find out what is going on?
Thanks a lot!

Without loops how can i read data from associative Array??

Hi all,
I am facing scenario like...
i need to read data from associative array without using loops is it possible,
CREATE OR REPLACE PACKAGE BODY test_pkg IS
    TYPE t1 IS TABLE OF NUMBER INDEX BY BINARY_INTEGER;
   -- in array we can expect more than one row or sometimes no data also.
FUNCTION test1(vt1 T1 DEFAULT CAST(NULL AS t1)) RETURN NUMBER IS
BEGIN
    -- basically in array we'll get data of column2
    -- this loop should satisfies table1.colum2 = nvl(NULL, table2.colum2 )if array is null.
    -- if array is not null then only compare with array values
    FOR i IN (SELECT t1.colum1,t1.column2
                     FROM table1 t1, table1 t2
                          WHERE t1.colum1 = t2.column1
                            AND t1.colum2 = nvl(vt1, t2.colum2)
      LOOP
        generateTEXT(i.colum1, i.colum2);
     END LOOP;
END test1;
END test_pkg;
in table1 we have date like...
colum1          column2
Jan                  1
Feb                  2
Mar                  3
if i call select test_pkg.test1(1) from dual then output should
be Jan..
and
select test_pkg.test1(null) from dual then it should display all elements from table1.
Jan                  1
Feb                  2
Mar                  3,
Thanks for your quick replay..

i need to read data from associative array without using loops is it possible,
No - you would need to create a SQL type and then use the TABLE operator to unnest the collection.
create or replace TYPE my_nums IS TABLE OF INTEGER;
DECLARE
-- TYPE my_nums IS TABLE OF PLS_INTEGER INDEX BY PLS_INTEGER;
v_nums my_nums := my_nums(1, 2, 3);
v_total number;
BEGIN
select sum(column_value) into v_total from table(v_nums);
DBMS_OUTPUT.PUT_LINE
    ('Sum of the numbers is ' || TO_CHAR(v_total));
END;
Sum of the numbers is 6

How can I read channels from different SCXI modules simultaneusly?

Hello.
I have a system that consists in:
- Three E-series DAQ boards (PCI-6034, PCI-6052 & PCI-MIO-16E)
- One SCXI chassis (SCXI 1001)
- 4 SCXI modules for voltage measurement connected to PCI MIO 16E
- One SCXI module for strain gauges connected to PCI 6034
- One SCXI module for accelerometers connected to PCI 6052
I have to develop a software application that reads all the channels at the same time or at least in the same program cycle. I have tried to create only one DAQmx task containing all the channels, although they belong to different DAQ boards (and SCXI modules, of course), but it seems to be impossible to use channels from different devices in the same task.
So I have created three different DAQmx tasks, one for each device and its channels. I have used one "DAQmx Start Task" VI for each task at the beggining of the loop in order to use them independently, reading their channels inside the loop in every program cycle.
When I have run the program I have get the following error:
"ERROR -200619 ocurred at DAQmx Start Task.vi
Chassis cannot be used for more than one scanning operation at the same time.
Do only one scanning operation or combine multiple scanning operations into a single operation."
What is the problem? How can I combine these multiple scanning operations? What can I do to read all channels at the same time?
Thanks.

Hello pablomendana,
it's ok that you got an error when trying to use more than one device on the same task. According to the setup you have, I agree that 3 tasks should be put in place.
The key question I have is... Have you configured manually at MAX the SG and accel. modules to be in Parallel mode?
I would not expect the error you get if they are in parallel mode (in which you could even read directly from the DAQ board, using DAQ device channels instead of SCXI channels).
Unfortunately, I haven't been able to setup a system similar to yours, but I would like to know more details on what you've tried so far.
Also, I recommend you that if still need help on setting up the system, use NI's SSP program to get support from your local NI Application Engineering organization, as this will be faster than the forum.
Regards,
Jorge M.

How Can i Read data From Maintainance View

I Want read data from Maintainance View. i written select query
SELECT *
FROM J_1yyyyV
INTO TABLE GT_BUSPLACE.
WHERE BUPLA = LV_BUPLA.
this is giving following error
"J_1yyyyV" is not defined in the ABAP Dictionary as a table,
projection view, or database view.
Can you help me Please.
Thanks in Advance.
Regards,
Raj.

Hi raj,
maintainance view is a nothing but combinations of table using join on some fields..
see the relation ship between the joins..
if you want to write selection query ..go to se11 -->enter view name >and open tab>
Table/Join conditions--> see the table's involved and join conditons between tables.
and write the select query same as like the Table/Join conditions in se11..now you can acheive the
table maintainance fields..
Prabhudas

How can I read weight from scale

Hi,
I want to setup SAP so that HUPAST transaction can read the weight from the scale. I could see that it looks for an RFC destination and scale name etc. But didnt succeed in creating the RFC destination
Please let me know if a third party software is a MUST or SAP has an inbuilt software for reading scales, if so how can we configure it. We are on ECC 5.0
Thanks for reading.

After a few more experiments, you can get correct values from the 'bounds'-descriptor.
function getTextExtents(text_item) {
app.activeDocument.activeLayer = text_item.parent
var ref = new ActionReference()
ref.putEnumerated( charIDToTypeID("Lyr "), charIDToTypeID("Ordn"), charIDToTypeID("Trgt") )
var desc = executeActionGet(ref).getObjectValue(stringIDToTypeID('textKey'))
var bounds = desc.getObjectValue(stringIDToTypeID('bounds'))
var width = bounds.getUnitDoubleValue (stringIDToTypeID('right'))
var height = bounds.getUnitDoubleValue (stringIDToTypeID('bottom'))
var x_scale = 1
var y_scale = 1
if (desc.hasKey(stringIDToTypeID('transform'))) {
var transform = desc.getObjectValue(stringIDToTypeID('transform'))
x_scale = transform.getUnitDoubleValue (stringIDToTypeID('xx'))
y_scale = transform.getUnitDoubleValue (stringIDToTypeID('yy'))
return { x:Math.round(text_item.position[0]), y:Math.round(text_item.position[1]) , width:Math.round(width*x_scale), height:Math.round(height*y_scale) }
I tested that this returns correct values both when image and text box get scaled. There is some strange Photoshop behaviour to note though:
bounds.left seems to be always 0 like one could assume
bounds.top on the other had is most times -1-3px. This probably corresponds to the amount the actual text rises above the text box. I feel it's a bug, i.e. it should be part of content bounding box, not the text area. But maybe it's like it was specced and I'm just interpreting it wrong.
x_scale and y_scale seem to be always equal. For example if you create a 100x100px text box and scale it to 200px horizontally, both x_scale and y_scale will be 2 and text_item.height will be 50.

How can I read color from frond-end PC

Hi Everybody,
I have en HTML- control in my GUI and I would like to adjust back ground color of my HTML page to actual client color scheme. Does anyone known how can I read the color settings from client pc?
Best regards
Bogdan

Hi,
If you are using LOAD_HTML_DOCUMENT method to load the repository object, then pass a merge_table which contains an instruction to replace the background:
TYPE-POOLS SWWW.
DATA: l_merge_table TYPE swww_t_merge_table,
        l_merge_item TYPE swww_t_merge_item,
        l_html_table TYPE TABLE OF w3html,
        l_html_line   TYPE w3_html,
        l_url         LIKE me->url.
    CLEAR l_html_table.
    l_html_line = ' '. " No background color, use default
    APPEND l_html_line TO l_html_table.
    l_merge_item-name = '<!BACKGROUND!>'. " Tag to be replaced
    l_merge_item-html = l_html_table.
    l_merge_item-command = ' '.     " blank means replace tag line
    APPEND l_merge_item TO l_merge_table.
    CALL METHOD html_view->load_html_document
         EXPORTING
              document_id = 'DOCID'
         IMPORTING
              assigned_url = l_url
         CHANGING
              merge_table = l_merge_table
         EXCEPTIONS
              OTHERS       = 1.
I have not tried this code but hope it helps,
Rao A

Can't read SLD from Integration Builder

Similar Messages

Maybe you are looking for