Can't read the airport express configuration

hi there,
i've got an AIPORT EXPRESS (b/g) V 6.3, which has been working marvellously for 4 year, with 3 different laptop ( powerbook, macbook pro and PC).
since last week end, my connection on internet was really slow (with the ethernet cable the connection is really fast as usual).
So I've reseted it. then reconfigure it. no problem.
then this saturday my girl friend couldn't see the network on her PC.
so I've resetted it again!
since then my macbook pro see it, also my airport utility, but it can't connect to it....
airport utility says :reading the airport express configuration... and nothing !!!!
EDIT: also iTunes can't see the AE anymore...
i just don't know what to do.
thank you for your solution
(hope my english not to bad)
Message was edited by: Relaxxx
Message was edited by: Relaxxx

Hello Relaxxx. Welcome to the Apple Discussions!
Although I know you have tried several resets, please try another "factory default" reset to get the AirPort Express Base Station (AX) back to its original factory configuration so that we can administer it.
After resetting it, connect your MacBook Pro directly, using an Ethernet cable, to the Ethernet port of the AX, and then, run the AirPort Utility to configure it. Where you able to access it now?
Once configured, you can disconnect the Ethernet cable. Using the AirPort Status icon in the menu bar, verify that you are connected to the AX's wireless network. Are you now able to both find it and connect from the icon?
Once you verified that you can access the AX, both via wire and wirelessly from the Mac, try the PC.

Similar Messages

Can i use the airport express in my hotel with wired connection?

I'm going to be traveling quite a bit coming up and staying in hotels with wired internet connections in the room. Can i use the airport express to connect with the hotel's internet connection and then my ipad and/or iphone 4S? I'm new to Apple products so will certainly appreciate any info that may help. Thank you!

You will need to have AirPort Utility installed on the iPad and/or iPhone. It is free on the App Store
App Store - AirPort Utility
Connect the AirPort Express 802.11n to the hotel Ethernet jack using an Ethernet cable
Power up the AirPort Express and wait 40-45 seconds
Tap Settings, then tap Wi-Fi on the iPad
Tap the AirPort Express under the heading of Set up an AirPort Base Station
AirPort Utility will take a moment to to analyze the connection and then you can proceed with the easy guided setup
Once the AirPort Express is configured, you should not have to set it up again at the next hotel. But, you could if you want to.

Can I use the Airport Express to create a secure wireless network in a wireless-only hotel?

Can I use the Airport Express to log onto an unsecured hotel wireless network, without an ethernet cable, to create a secure wireless network for my MacbookAir, IPad, IPhone, etc.? If so, how is that done?

will the Airport Express allow you to log onto a hotel wireless network, and broadcast a secure wireless network in your room for your wireless devices, like the Ipad, Iphone, etc.?
The bottom line with a single AirPort Express is no.
The AirPort Express can only "extend" a wireless network when the network is being provided by another Apple router.
As you might imagine, it is extremely unlikely that that the hotel network....which no doubt uses professional wireless access points provided by a manufacturer of commercial systems.....would be compatible with an AirPort Express.
In many years of travel domestically and internationally, I cannot recall a time when a single AirPort Express would "extend" the signal provided by a hotel's wireless network.
However, if you had two AirPort Express devices handy, you might be able to configure one to "join" the hotel network and provide an Ethernet signal to the second AirPort Express, which would be configured to "create" your own "private" wireless network.

HT1126 Can I connect the Airport Express directly to my wireless router?

The old owner of my house set the Air port for my use, gave me a password ... when I tried it, the password never worked.
DO not want to lose my old wireless system as it allows me to do more than just the Air Port.
should I reset the system?

can i connect the airport express into an ethernet port in the wall
I assume you are asking about obtaining an Internet connection here.
First, temporarily turn off the wireless on a laptop and connect the laptop to the Ethernet wall jack with an Ethernet cable. Can you log on to the Internet this way?
If yes, then you can connect an AirPort Express to this Ethernet port and configure it to provide a wireless signal for multiple devices.
If no, then you can connect the Express, but you will not have an Internet connection.

AirPort Utility hangs on "Reading the AirPort Extreme configuration"

Our main router is our AirPort Extreme. We have two other AirPort expresses on the WDS. Everything was working fine till tonight. All the computers can connect with the router and with each other, but the AirPort Extreme doesn't want to connect to the internet or let the AirPort Utility connect to it. When you click on it for either Auto or Manual config, it just hangs with the message, "Reading the AirPort Extreme configuration". After a while it will time out and say, "An error occurred while reading the configuration." I've tried connecting with both a MBP over wifi and a G5 tower via ethernet. Same result each time. Finally I did a factory reset on the thing. After a while of reconnecting I was able to load up a saved .baseconfig file and reinstall it onto the APExtreme. The AirPort freaked out again. It still gives out IPs and routes network traffic, but it wont connect to the internet and it wont let me connect to it via AirPort Utility.
Any ideas?
Message was edited by: kidhack
Message was edited by: kidhack

Check the firmware of the airport, versus the software of the airport utility on the computers in question, the 2 should match reasonably; the latest of the 2 are airport utility 5.4.1, and firmware 7.4.1. So for instance if you have airport utility 5.4.1 and airport firmware 7.4 the 2 will not read correctly and may hang in random spots, or give you other weird problems. Assuming this does not fix it connect the airport directly to the computer through one of the LAN ports and configure it that way

How can I get the Airport Express to handle all the PPPoE stuff?

Hi, I’m visiting my family in China, and now trying to help my dad, with his Airport Express and how to set up a PPPoE connection.
We have currently set up the Airport Express in bridge mode (not distributing IP adresses and selecting DHCP under the Internet tab in admin utility). The Airport settings on our two computers is set up to connect using PPPoE using the given login name and password. (ps! we can not see the Base station in Airport Admin Utility when using these settings, we would have to select a new location from the Apple menu to see it and make condigurations.)
What we want is to do, is to have the Airport Express connect to the ISP using a PPPoE connection and not through the computer.
I know there is a 'Connect using PPPoE' option in Airport admin util, letting me input account name and password. If I select this setting instead of DHCP, enable distribution of IP addresses and configure my Airport card to NOT connect using PPPoE, I will see my base station in the Airport admin util with the IP address of 10.0.1.1 (or similar) and my computer will have x.x.x.2. Next to the Airport icon in the menubar, a scrolling message will say 'Looking for PPPoE host' without anything happen. I am sure my account name and password is correct as they've both worked when using this computer to connect to PPPoE (like now)
How can I get the Airport Express to handle all the PPPoE stuff without using bridge mode?
Ps! Both me and my dad have iPhones whom we can’t seem to get to connect unless its been distributed an IP address cause there's as fars as I know, no options of inputing a PPPoE user name and password.

Any solutions to this? I'm in China also, in Beijing, trying to get my Airport Express to work with an ADSL modem.
Direct ethernet cable connection to my Macbook works fine.
When I configure the Airport Express with the ID and password that seems to be fine also – Airport Express shows a green light.
But I cannot figure out the settings to connect wirelessly from my Macbook to the Airport Express. I get a constantly scolling message: "Looking for PPPoEhost..."
thanks
Paul

Can i plug the airport express into the UPS i use for my computer or must it be plugged into a wall outlet?

Can I plug the Airport Express into my UPS/APC or must I plug it into the wall outlet?

Bernadine65 wrote:
Can I plug the Airport Express into my UPS/APC
Sure.
I live in central Florida, lightning captial of the US, and wouldn't plug anything electronic into the wall directly.
My Airport Extreme (and external HD attached to it, and cable modem) are plugged-in to one; my iMac, external HD, and answering machine to a second; and my cable box and TV into a third.

Can I use the airport express with a desktop computer that is not wire less- I want to have wifi in the house for an iphone

Can i use the airport express with a desktop computer not wifi- I want wifi for my iphone

I can't seem to find any information anywhere. It seems like it should work since the AX is showing up on his wifi settings on both his iPhone and iPod. Not to mention the Apple "Genius" told him that it should work. However, they also told him that it came with an ethernet, USB and the stereo patch cables...

Can I use the Airport Express as a cable modem?

I am trying to set up wireless internet in my home, and I am planning to purchase an Airport Express. Can I use the Airport Express as a cable modem, or do I have to purchase a modem from the ISP and then connect the AE to the output of the cable modem?
Thanks,
Adrian

No, the AirPort base stations do not perform the functions of a DSL or cable modem, so you will still need to acquire one.

Reading the AirPort Extreme configuration...

AirPort Extreme: 7.4.1
AirPort Utility: 5.4.2
OS X Version: 10.5.7
When using AirPort Utility of my 2.33 GHz MacBook Pro I get a long wait (either Manual or Continue) while the pinwheel spins next to "Reading the AirPort Extreme configuration..." After about 5 mintes a get a dialog box
"An error occurred while reading the configuration.
Make sure your Apple wireless device is plugged in and in range of your computer or connected via Ethernet and try again. (-6753)"
The Airport Extreme shows up in Finder, but I cannot access it. I'm connected to the internet just fine (I'm posting this).
Any ideas how I get to actually access the AEBS? I've read other threads on this (they're old and closed) but did not see a conclusion.
Regards,
John

Just went through the same thing myself. Set everything up, it worked like a charm, then I clicked on this innocent little button: Allow setup over WAN. I unchecked it because I don't want to allow WAN connections to configure my router, thank you very much.
However, what that checkbox really means is, "You are screwed, you can never configure your router ever again, regardless of whether you are connecting over the WAN, the wireless network or even the LAN (direct ethernet connection).
The other thing I discovered while researching this is, If you want to reset the router as you will absolutely HAVE TO DO to get around this problem once you've clicked and saved that one setting, and you have a blinking amber light, and holding the reset button for minutes doesn't appear to have any effect, what you do is: unplug the router, push the reset button and hold it, plug in the router while holding the reset button. 5 or so seconds later you will get a quick flashing amber like and you have successfully reset it.
Now I need to figure out how to file a bug to Apple. I assume this is a bug. It's a huge security whole and I am really ****** off about it.

MacBook Pro that my Airport Express WiFi profile was created crashed. Can i reset the Airport Express either to an iPad or Windows 7 computer?

MacBook Pro that my Airport Express WiFi profile was created crashed. Can i reset the Airport Express either to an iPad or Windows 7 computer?

Get the Airport Utility for the your iPad from the App store. You will need to know the password for the Airport Express (not the WiFi password) to access the AE. The iPad utility will, I think, do all of the actions to control your AE.
You can reset the AE back to factory default but with the iPad app you should not ned to.

HT1515 can I make the Airport Express secured so no one else can use it?

Can I make the Airport Express secured so no one else can use it?

Choose a security protocol, WPA2 personal suggested. Then choose and install a strong password. Only users who are cognizant of your password will be able to connect to your wifi network. Of course, you'll need to do this via your Airport Utility application.

Can I plug the airport express into 220v?

I want to buy the airport express to use in Manila which has 220v standard. Can I plug the airport express directly or should I use a power transformer?
Any insight would be greatly appreciated.
Thanks,
Toni

It is a worldwide capable, auto-ranging 100 ~ 240v device - you just need the right cable/adapter. Apple sells a travel adapter kit if you need one.

Stuck on "Reading the airport extreme configuration"

Strange problem here. I have an AEBS with a Win7 PC and my Mac Pro connected to it, sharing a USB printer. All good until yesterday when I needed to troubleshoot a printer problem and tried to verify settings on the AEBS via my Mac Pro. It won't allow me in, just says "Reading the airport extreme configuration"... I let this go on for over 30 mins.
I tried restarting from Airport Utility. No luck.
I tried unplugging it, then waiting, then plugging it back in. No change.
I tried re-setting it using a paper clip. No change, but...
Airport Utility popped up on the Win 7 PC, and it allowed me in, no problemo. I restored and then verified my settings, etc.
But on my Mac, I can't get in. Any insights would be much appreciated.
Thanks

Add me to the list of users who are having the same problem. We are a school district that has 125 airports in 6 buildings. 70 of them are the new Airport Extreme Dual Band units. Of the 70 new units, 18 are having this problem.
"File -> Configure Other" does not change the behavior of the 18 unresponsive units. They can be programmed after a factory reset, and sometimes connected to shortly after the initial "Update" but after few hours, they cannot be accessed anymore.
I have been in contact with Apple support. Their only solution was to shrug their shoulders and tell me to start replacing them. After replacing 2, I had the same problems with 1 of the two replacements.
Something that may also be related. We have occasional short term power outages (3 seconds or less). After an outage like that, a significant number of the airports will reject clients until they (the airports) are properly rebooted.
Sounds like they need to fix the firmware.
Message was edited by: JasonBolbach

Can you use the Airport Express A1264 as an AP and a DHCP server at the same time?

Can you use the Airport Express A1264 as an Access Point and a DHCP server at the same time?
I would like to use it as a DHCP server and AP at the same time in my LAN (no internet, just local machines through a few switches). I was lead to belive this could be the case from a few networking friends that haven't been friendly enough to help me out setting it up.

I need it to act as a dLink/Cisco/Linksys/etc basic wifi router, in the fact that you can access it via wifi, and it will spit out DHCP addresses (192.168.1.xxx) to everything wired downstream of it.
I want to simultaniously provide a Wifi connection and a LAN connection at the same time
Thanks,
BRad

Can't read the airport express configuration

Similar Messages

Maybe you are looking for