Can't read the disk label & Can't open disk label package

Hi
I can't read the disk label & can't open disk label packages...I used the format command but there are do not showing any label...Please HELP
Thanks
Mohammed Tanvir

Hello worl !:
I'm installing a Tape in my Sparc 5. The system works whit Solaris 2.4.
When I boot the system without the tape it starts normally. But, the problem is when I put the tape... and I have this message:
Can't read disk label
Can't open disk label package
Can't open boot device
In the prompt I did:
ok probe-scsi-all
Target 3 Disk SEAGATE
Target 4 Removable only Tape ARCHIVE // my TAPE
Target 6 Removable Read only device TOSHIBA XM- // my CDROM
ok boot -r
Can't read disk label
Can't open disk label package
Can't open boot device
I check with the commnad 'devalias' and all the paths are ok. I probe when 2 different tapes and I format the disk using the command format booting the system without the tape . But I've the same error when the tape is connected.
Someone can help me?
[email protected]
HPP.

Similar Messages

  • I am trying to import cr2files from the camera into lightroom 5 and keep getting an error message saying Lightroom can not read the files and therefore will not import them.  Has anyone had a similar problem-.thanks

    I am trying to import cr2files from the camera into lightroom 5 and keep getting an error message saying Lightroom can not read the files and therefore will not import them.  Has anyone had a similar problem….thanks

    If you are having the same problem, i.e. a disk permission problem, open your favorite search engine and search on, "change disk permissions", and I think you'll find plenty of information on how to fix the problem. This is a Lightroom forum. Your problem is with your operating system. There is no sense in rewriting instructions that are already available if you do a simple search.

  • I am changing to a larger hard drive on my Mac. Can I copy the Aperture library from my backup disk running Time Machine without loosing anything?

    I am installing a larger harddrive on my Mac. Can I copy the Aperture library from my backup disk running Time Machine without loosing anything? I am getting help migrating everything else on to the new harddrive, but since copying the 350Gb Aperture library takes a lot of time, I am planning to do that part myself.

    I found the following information on Time Machine help about restoring Aperture library from TM
    Restoring Your Aperture System
    If you buy a new computer or use another system at a different location and want access to the Aperture library, you can install Aperture and then transfer the library from your vault (on your backup disk) to the other computer. If you experience equipment failure or other unexpected events, such as fire or weather-related damage to your equipment, you can easily restore the entire library to your new computer from a backup disk.
    HideTo restore the entire library from an external backup disk
    Restoring Your Aperture System
    If you buy a new computer or use another system at a different location and want access to the Aperture library, you can install Aperture and then transfer the library from your vault (on your backup disk) to the other computer. If you experience equipment failure or other unexpected events, such as fire or weather-related damage to your equipment, you can easily restore the entire library to your new computer from a backup disk.
    HideTo restore the entire library from an external backup disk
    If you buy a new computer or use another system at a different location and want access to the Aperture library, you can install Aperture and then transfer the library from your vault (on your backup disk) to the other computer. If you experience equipment failure or other unexpected events, such as fire or weather-related damage to your equipment, you can easily restore the entire library to your new computer from a backup disk.
    HideTo restore the entire library from an external backup disk
    Connect the hard disk drive that contains the most up-to-date vault to your computer and open Aperture.
    Choose File > Vault > Restore Library.The Restore Library dialog appears.
    Choose the vault you want to use to restore your library from the Source Vault pop-up menu.If the vault doesn’t appear in the Source Vault pop-up menu, choose Select Source Vault from the Source Vault pop-up menu, navigate to the vaults location in the Select Source Vault dialog, then click Select.
    Click Restore, then click Restore again.

  • My iMac suddenly can't read the backup hard drive I've been using for Time Machine.  I did NOT just upgrade the OS or anything.  The external HD is an OWC Mercury Elite All Pro. It's worked fine since I got the iMac 4 years ago.`

    My iMac suddenly can't read the backup hard drive I've been using for Time Machine.  I tried unplugging the cord that connects the HD to the iMac and plugging it back in, but I still get "The disk you inserted was not readable by this computer" below which are buttons for Initialize, Ignore and Eject.  I was using a cord that went from larger square plug to larger square plug.  So then I tried one that went from smaller square plug to what I think is USB (thin rectangular plug) of the sort that connects the keyboard and mouse. It's the type that my printers and scanners use to connect to the iMac.  I did NOT just upgrade the OS or anything.  The external HD is an OWC Mercury Elite All Pro. It's worked fine since I got the iMac 4 years ago. What else can I try before just trying to initialize and

    Thanks, Michael!  I do hear it at times spooling up and running. Just after I bumped the thread I looked for troubleshooting for this drive online and found the manual which suggested using Disk Utility which I've seen before accidentally (if I hit Command Shift U instead of Shift U to type "Unit" on a new folder for a student's homework ) but had never really noticed.   Disk Utility does see it and also a sub-something (directory?) which might be the Time Machine archives on the disk, called disk1s2), sort of the way that my iMac's hard drive shows up as 640.14 GB Nitachi HDT7... and has a sub-something titled DB iMac, which is what I named my iMac's hard drive.
    Anyway the owner's manual just shows the image under the formatting section, not the troubleshooting section, but as soon as I saw it in the manual I remembered seeing it accidentally a few times, went to it, and am now verifying the disk.  Right now it's telling me that it will take 2 hours to complete the verification, so I guess I have a bigt of a wait.  :-) 
    Does that fact that Disk Utilities can see it mean it's not failed, or just that it hasn't completely failed? 
    I can see the virtue in having multiple redundant backups, or at least two backups. What do you suggest?  Two external hard drives?  I had this one linked by ethernet, and but I also have a cord that could link it by USB (like a printer), so if this one is reparable I could get a second one and link it by USB.  If this one is not reparable I could get two and do the same thing.  I do have an Airport so I suppose it's possible to get some sort of Wi-Fi hard drive (my new printer/scanner uses only the network and not a cable, although it has a cable that I used for the initial installation), but I'd suspect a Wi-Fi hard drive might have a higher price.
    What hard drives, if any, do you recommend? I seem to recall that when I was looking at external hard drives 4 years ago, Apple's were substantially more expensive, which is why I got the OWC Mercury Elite All Pro.

  • I am not able to Sync. My iPOD classic 80Gb. It tells that as iTunes can not read the contents-restore to factory settings- after restoring – it tells that it can not be restore bcause there are files that are used by other application. I am having Widows

    I am not able to Sync. My iPOD classic 80Gb. It tells that as iTunes can not read the contents-restore to factory settings- after restoring – it tells that it can not be restored bcause there are files that are used by other application. My iPOD appears in My Computer in drive H as a mass storage generick volume

    Try disabilng the Enable Disk Use option from under the iPod's Summary tab, applying the changes, and seeing if that helps.
    Otherwise, temporarily disabling any antivirus, security, firewall, or file indexing software that may be running on your system and then try restoring your iPod again.
    B-rock

  • Can't Zap the P-RAM , Can't start from an installer disk with the C-Key...

    Can't Zap the P-RAM , Can't start from an installer disk with the C-Key... or The D-Key for Apple Hardware test or run with the shift Key in Safe Mode!!!
    About a week ago I started to have problems with the Mac after 10.5.6! First the Mac after shut down would restart on its own in 10 to 15 minutes. I read in various forums about some of the 10.5.6 problems. I did a clean reinstall where the Mac created a previous system folder. After this suddenly mail, I-Chat as well as some other programs would open, then close immediately! Since I did not have things backed up because I didn't have a large drive, I dragged my files and apps to another drive and reformatted the drive zeroing out all data and did a fresh new install then brought in the combo 10.5.6 update.The Mac is running correctly but I can't Zap the P-Ram, startup from the Mac OS X installer Dvd with the C key or run Apple Hardware Test with the D key or boot in safe mode with the shift key. I can boot any of the Bootable disks from the start-up Disk in Preferences.
    I went over this with Apple and they suggested I run the Apple Hardware test. It won't run on this machine because I can't boot it with the D- Key. I ran tech Tools and every single thing checks out OK! This Mac has worked great since I got it in I believe Feb or March of 2007.

    Make sure that you don't have firmware password protection enabled. It will prevent some boot key shortcuts from working, like clearing NVRAM, etc. You can disable firmware password protection by booting off the OSX DVD and loading the utility.

  • My up to date iMac can not read the lightroom 5 installation dvd I received for christmas, the dvd player works fine with other dvd's, is there a way to download the program with the dvd's serial number?

    my up to date iMac can not read the lightroom 5 installation dvd I received for christmas, the dvd player works fine with other dvd's, is there a way to download the program with the dvd's serial number?

    No need to worry about the disk version. You would just have to install an update anyway as soon as it was installed. Download from the link provided below and use the serial number you have to activate.
    Product updates

  • How can I change the fonts in "contacts" when printing mail labels

    How can I change the fonts in "contacts" when printing mail labels ? I used to be able to do this but in Mavericks this ability seems to have gone away. Am I missing something ?

    Actually in my case it doesn't work. I used to be able to pull up the font window with it but the button merely flickers when I click it. The image selection button and font color both are functional. WEIRD. I don't think this is a Mavericks issue as I recall having it come up with one of my user profiles before installing. Now I can't make it happen with either of my user profiles.
    I don't seem to have printing issues in other applications. And I recently reset the fonts in a futile attempt to correct this.
    I may post a new topic in Mail Contacts and Calendar if there is no response here after a bit.

  • I created a partition on my iMac drive. I have trashed the files that were in the partition but I can not trash the icon. I tried with Disk Utility. Any ideas?

    I created a partition on my iMac drive. I have trashed the files that were in the partition but I can not trash the icon. I tried with Disk Utility. Any ideas?

    If I understand correctly,  the partition will still be on the disk and therefore mounted on the desktop. You would need to remove that partition to remove the icon.
    Be careful if you try this, don't upset the main Macintosh HD partition or you may lose the OS and your files.
    And always have a full tested backup of your system before modifing disk partitions.

  • I have the latest downloadable version of LR5.  It crashed while it was createing 1:1 previews during an import. After a Win7(64) restart, it shows a message that LR needs to quit because it can't read the preview files and it will try to fix it the next

    I have the latest downloadable version of LR5.  It crashed while it was createing 1:1 previews during an import. After a Win7(64) restart, it shows a message that LR needs to quit because it can't read the preview files and it will try to fix it the next time is launches.  I get the same message the next and every subsequent time it launches so I can't launch LR at all now.
    I get that the preview file got corrupted somehow.  Is there some way to fix this problem without building a new catalog?

    Use Windows Explorer to open the folder containing your catalog. You will see a folder with the extension .lrdata. You need to delete that folder and then start Lightroom again. Lightroom will generate a new previews folder.

  • How can we read the screen field values from the report selection screen wi

    Hi expart,
    How can we read the screen field values from the report selection screen with out having an ENTER button pressed  .
    Regards
    Razz

    use this code...
    AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_posnr.
    **Read the Values of the SCREEN FIELDs
    CALL FUNCTION 'DYNP_VALUES_READ'

  • How can I read the bootstrap files and extract the fragment-URLs and fragment-numbers in plain text?

    How can I read the bootstrap files of any HDS Live stream and extract the fragment-URLs and fragment-numbers in plain text?
    Could it be that it is some kind of compressed format in the bootstrap? Can I uncompress it wirh  f4fpackager.exe? Could not find any download for f4fpackager.exe. I would prefere less code to do so. Is there something in Java of JavaScript, that can extract the fragment-numbers?
    Thank you!

    Doesn't sound too hard to me. Your class User (the convention says to capitalize class names) will have an ArrayList or Vector in it to represent the queue, and a method to store a Packet object into the List. An array or ArrayList or Vector will hold the 10 user objects. You will find the right user object from packet.user_id and call the method.
    Please try to write some code yourself. You won't learn anything from having someone else write it for you. Look at sample code using ArrayList and Vector, there's plenty out there. Post in the forum again if your code turns out not to behave.

  • Help required please. "Itunes can not read the contents of my iphone"

    Greetings all,
    I know this question has been asked before and I apologize for asking again but all the solutions provided don't seam to work for me, can anyone help me please.
    I am receving the message: "Itunes can not read the contents of the iPhone. Go to the summary tab In iPhone Preferences and click restore torestore this Iphone to factory settings".
    Now a little about my iphone, Itunes and my laptop and what steps i havealready tried.
    I have an iPhone 4 running software 5.0
    My itunes version is 10.5.0.142
    I know these are not the most up to date versions but I have had this issue for almost 3 months now and updating the software back then was the first step I tried. I don’t believe updating to the latest will fix this issue as updating the last two times did nothing.
    Every so often after starting Itunes, The program will stop responding and will require the three finger death kill (CTRL, ALT, DELETE) to open task manager to end the task of Itunes. Once it shuts down, I restart the iTunes and it runs smoothly, apart from not reading my iPhone.
    When I run a diagnostic in itunes under the help tab, I get these fail messages:
    Network Connectivity test: Secure link to Itunes store fail
    Device connectivity test: Under support services: Itunes helper is not running. And under ports: No iPod, iPhone or iPad found.
    Device Sync test: No iPod touch, iPhone or iPad found.
    *See below for full diagnostic report*
    I have restored back to factory settings twice.
    I have shut down and restarted both my iPhone and laptop.
    I am running Windows 7 32-bit on my laptop.
    I am using ZoneAlarm as my fire wall, and have been disabling it when syncing my iPhone to prevent other error messages.
    The iPhone is plugged into a genuine Iphone USB cable and is plugged into a USB port not a USB hub on my laptop, I have tried plugging it into all 4 USB ports and this issue still persist. The Cable is less then 5 months old, is not frayed or damaged in any way, have also borrowed 2 other cables from friends and still the same issue.
    The iPhone does not even come up in windows explorer as a digital camera.
    The iPhone is NOT jailbroken
    I do not live close to a so called genius bar, however I have made the journey to them on 3 separate occasions last year when I first received my iPhone for a different issue, the so called genius's could not fix the problem so they just gave me a new (refurbished) iPhone, which did not extend my warranty. I will not be taking the iPhone back to them as I believe they can not resolve many issues, this is why I am reaching out to the power of the people in the wider apple community.
    I have read in other forums about ifunbox and other programs for jail broken iPhones to isolate folders “iTunesDB” and "iTunesCDB" and delete them. If this is the issue is there a way to access these files through windows explorer as my iphone is not jailbroken.
    I hope I have provided enough information and someone can help me fix this issue. If I have left anything out, please let me know. I thank everyone in advance for your patience and support.
    Thanks
    Hoggie27
    FULL DIAGNOSITC REPORT
    Microsoft Windows 7 Home Premium Edition Service Pack 1 (Build 7601)
    Hewlett-Packard HP Pavilion dv6 Notebook PC
    iTunes 10.5.0.142
    QuickTime not available
    FairPlay 1.13.35
    Apple Application Support 2.1.5
    iPod Updater Library 10.0d2
    CD Driver 2.2.0.1
    CD Driver DLL 2.1.1.1
    Apple Mobile Device 4.0.0.96
    Apple Mobile Device Driver 1.57.0.0
    Bonjour 3.0.0.10 (333.10)
    Gracenote SDK 1.9.3.494
    Gracenote MusicID 1.9.3.106
    Gracenote Submit 1.9.3.136
    Gracenote DSP 1.9.3.44
    iTunes Serial Number 001BAD14XXXXEA78
    Current user is an administrator.
    The current local date and time is 2011-11-16 10:04:53.
    iTunes is not running in safe mode.
    WebKit accelerated compositing is enabled.
    HDCP is supported.
    Core Media is supported.
    Video Display Information
    NVIDIA, NVIDIA GeForce GT 230M 
    **** External Plug-ins Information ****
    No external plug-ins installed.
    The drive H: Vodafone  USB SCSI CD-ROM Rev  USB is a USB 1 device.
    **** Network Connectivity Tests ****
    Network Adapter Information
    Adapter Name:    {97524DB0-B9DC-41DB-8AFA-0CE6938F7C95}
    Description:    PC
    IP Address:    (HAS BEEN REMOVED FOR PERSONAL REASONS)
    Subnet Mask:    255.255.255.255
    Default Gateway:    0.0.0.0
    DHCP Enabled:    No
    DHCP Server:   
    Lease Obtained:    Thu Jan 01 11:00:00 1970
    Lease Expires:    Thu Jan 01 11:00:00 1970
    DNS Servers:    10.143.147.147
            10.143.147.148
    Adapter Name:    {BFF0456E-DE42-4FEF-B1FA-1EA1C5EDEE42}
    Description:    Vodafone Mobile Broadband Network Adapter (ZTE)
    IP Address:    0.0.0.0
    Subnet Mask:    0.0.0.0
    Default Gateway:    0.0.0.0
    DHCP Enabled:    No
    DHCP Server:   
    Lease Obtained:    Thu Jan 01 11:00:00 1970
    Lease Expires:    Thu Jan 01 11:00:00 1970
    DNS Servers:   
    Adapter Name:    {D5511FFD-0CA8-4F62-B3CA-E90384FFCD03}
    Description:    Broadcom 43225 802.11b/g/n
    IP Address:    0.0.0.0
    Subnet Mask:    0.0.0.0
    Default Gateway:    0.0.0.0
    DHCP Enabled:    Yes
    DHCP Server:   
    Lease Obtained:    Thu Jan 01 11:00:00 1970
    Lease Expires:    Thu Jan 01 11:00:00 1970
    DNS Servers:   
    Active Connection:    PC
    Connected:    Yes
    Online:        Yes
    Using Modem:    Yes
    Using LAN:    No
    Using Proxy:    No
    SSL 3.0 Support:    Enabled
    TLS 1.0 Support:    Enabled
    Firewall Information
    Windows Firewall is on.
    iTunes is NOT enabled in Windows Firewall.
    ZoneAlarm Firewall is installed.
    Connection attempt to Apple web site was successful.
    Connection attempt to browsing iTunes Store was successful.
    Connection attempt to purchasing from iTunes Store was successful.
    Connection attempt to iPhone activation server was successful.
    Connection attempt to firmware update server was unsuccessful.
    The network connection timed out.
    Connection attempt to Gracenote server was successful.
    Last successful iTunes Store access was 2011-11-16 09:59:57.
    **** CD/DVD Drive Tests ****
    LowerFilters: Afc (1.0.0.2),
    UpperFilters: GEARAspiWDM (2.2.0.1),
    F: hp CDDVDW TS-L633N, Rev 0300
    Drive is empty.
    **** Device Connectivity Tests ****
    iPodService 10.5.0.142 is currently running.
    iTunesHelper is currently not running.
    Apple Mobile Device service 3.3.0.0 is currently running.
    Universal Serial Bus Controllers:
    Intel(R) 5 Series/3400 Series Chipset Family USB Enhanced Host Controller - 3B34.  Device is working properly.
    Intel(R) 5 Series/3400 Series Chipset Family USB Enhanced Host Controller - 3B3C.  Device is working properly.
    FireWire (IEEE 1394) Host Controllers:
    1394 OHCI Compliant Host Controller.  Device is working properly.
    Most Recent Devices Not Currently Connected:
    iPhone 4 (GSM) running firmware version 5.0
    Serial Number:    85107XQLA4S
    **** Device Sync Tests ****
    No iPod, iPhone, or iPad found.
    < Edited By Host >

    Hi AM_Kidd.
    Thanks for your reply.
    I have done a complete uninstall and re install of iTunes and all related apple programs from my laptop through control panel, add remove programs and also by going through program files and deleting all tracers of any left over folders remove programs may have missed.
    My apologies for forgetting to add this in my original post.
    Thanks again

  • After upgrading to ios 6.1, I experienced the following problem: I am no longer able to read the magazine I subscribed (The New Yorker) if I don't have access to internet. If the iPad is on FlightMode I can't read the magazine or the books in iBooks

    After upgrading to ios 6.1, I experienced the following problem: I am no longer able to read the magazine I subscribed (The New Yorker) if I don't have access to internet. If the iPad is on FlightMode I can't read the magazine or the books in iBooks. Can you help me?

    I am having the same problem.  I have a 2nd generation ipad wi-fi only.  All was working great until I upgraded.  NONE of my downloaded magazines or rss-feeds are accessible.    For the magazines, their icons show up on the "shelves" but once you click on one it wont even take you to the "issues" i have downloaded.  it jumps back to the shelf page. 

  • My printer menu is no longer displaying in English. I can't read the display to try to troubleshoot

    My boss' printer HP Color LaserJet CP2025 - menu no longer displays in English. I can't read the display to troubleshoot or reset. Is there another way to change the setting?

    I have not verified these steps, but this is what I located:
    A. To change the display language back to English, please perform the following steps:
    1. Press the right arrow 2 times, press the OK button (you should be in the System Setup menu).
    2. Press the OK button again (you should be in Language). 
    3. Press the right arrow until you see something that may be English, press OK button. The menu is a continuous loop, so if you miss it the first time the option will return.
    007OHMSS
    I was a support engineer for HP.
    If the advice resolved the situation, please mark it as a solution. Thank you.

Maybe you are looking for