Can't reboot Airport Express?

Hello everyone! I've had my Airport Express for about 4-5 years. Over the last month, I've been losing my network and when I go into the Airport Utility, it isn't seeing it my Airport, even when I'm sitting next to it. It has the same software (v. 6.3) and this is my third Mac laptop to use this Airport. I have it set up with DSL, and have had this configuration for about a year and haven't had a problem with losing my network until just this month.
The only time I can get my computer to see the Airport is when I do a hard boot and if I make any changes, like adding a password, on the reboot, it gets stuck at the yellow flashing light and my computer won't see it, neither will my company's laptop, nor my Wii. Do I need to just buy a new one?

I think I figured out the problem which was the Internet settings. My internet is DSL provided by my building and I changed the setting to enable NAT instead of DHCP. So far, so good. I've booted up my Airport about 5 times last night and it seems to still be connected. I hope this information helps!

Similar Messages

  • Is there a way I can connect my airport express to be able to airplay the sound from my apple tv?

    Is there a way I can connect my airport express to ba able to air play to my speakers the audio from apple tv?

    GEESAR wrote:
    hi there
    is there anyway i can use the unlimited data i have from my mobile network provider (o2)  on this i pod touch 4 generation the latest model  NO.
    and does the sim from my mobile network o2 be used in the ipod touch4 to use the unlimited minuites i have from my mobile network provider  NO
    if not then how do i use the unlimited data ive been given through my mobile network provider please tell me most kindly  Purchase a mobile WiFi hotspot (Sometimes referred to as a MyFi), or have that service added to your cell phone.
       geeeeesar also how does this ipod touch4  pick up the  wifi free of charge is this possible or do you have to pay for limited data to access internet Your iPod can connect to any unsecured WiFi network that you are currently within range of.  These networks can be found at your local library, some city/county government buildings, doctor's offices, Denny's, IHOP, Starbuck's, Home Depot, Lowes, Best Buy, and other merchants.  Your iPod can connect to any secured WiFi network that you are within range of and that you have the password for. 
    thanks  can i pod touch 4 generation download movies too  please help thank u very much....  Yes.  If your iPod has a WiFi connection and you have an account with a service like NetFlix....

  • How can i install airport express A 1264 on os x 10.9.2

    How can i install Airport Express A 1264 on os x 10.9.2

    Hello chawich
    All you should need is Airport Utility that is located in the Utilities folder that sits in the Application folder. If you have an iOS device, you can also set it up with that device with Airport Utility or in Wi-Fi section in Settings.
    AirPort Utility software and firmware downloads
    https://support.apple.com/kb/HT1998
    Regards,
    -Norm G.

  • Airport Utility can't find Airport Express after setting up as repeater station

    I wanted to extend my 2Wire-based wireless network into a specific room that never seems to be able to pick up the signal, and found the following instructions on how to do so on Apple's website:
    (note: these instructions were submitted by another user in response to a question as to whether or not an Airport Express could be used as a repeater station for non-Airport Extreme-based wireless networks - linked here http://store.apple.com/us/question/answers/product/MB321LL/A?pqid=QY4CAJJC7KFTTD KYH72DKPXF4CAUA9D4J).
    Yes, you can do this two ways:  If you can connect your airport express to your router via ethernet, then you will perform the following steps in the airport utility:
    1.  Select your airport express.
    2.  Select manual set up.
    3.  Under Wireless, select Participate in a WDS network
    4.  Enter your network name, radio mode, channel, and security
    5.  Under WDS, select WDS main
    6.  Check wireless clients
    7.  Add the MAC address of the router
    8.  Click update
    That's it
    Now, if you connect your airport express to your router wirelessly, all the steps are the same except for step 5.  In this step, select WDS remote instead.  Everything else is the same.
    I followed those instructions exactly with my Airport Express and, after restarting, the amber light is flashing on and off continuously and the Airport Utility can't find the Airport Extreme base station. What the heck went wrong here?

    Update:
    I restarted the laptop I used to set up the AX as well as pushing the "reset" button on the AX (first time - pressed it for 1 second, Second Time - pressed and held for 15 seconds then let go). The Utility still isn't recognizing the base station.
    I also upgraded the Utility's software to 5.5.3 right before I went through these steps, and now it's not recognizing the base station. ARGH.
    Update #2: I plugged the AX into my laptop with an ethernet cable and the utility STILL can't detect it. This is ridiculous.
    Update #3: Not 30 seconds after update #2, it FOUND the **** AX >.< I'm updating the firmware, but I still can't get it to work as a repeater station if I have to plug it into my laptop all the time JUST to get the Utility to recognize that yes, Virginia, there IS an Airport Extreme.
    Message was edited by: bleedingrose19

  • I currently have a D-Link DI-604 broadband router with windows computers.  How can I add wifi to the network for use with ipad?  Can I use AirPort Express?

    I currently have a D-Link DI-604 broadband router with windows computers.  How can I add wifi to the network for use with ipad?  Can I use AirPort Express?

    Yes. You can directly connect an 802.11n AirPort Express Base Station (AXn) using an Ethernet cable. The AXn would then just need to be configured as a bridge to allow the D-Link to continue to provide both NAT & DHCP services for all network clients connected to either router.
    In this configuration, the AXn would broadcast a wireless network for your wireless network clients to connect to.

  • Can u run Airport Express and a wireless modem together?

    Can u run Airport Express and a wireless modem together at the same time?
    I'm using AE purely for music distribution and have just bought a wireless modem for the internet (not a AE). However I can now only select either the AE network, OR the wireless internet network (it's BT HomeHub). Hence I can either play music or use the internet, but not together!
    Any ideas anyone..??
    Thanx
    David

    You should configure your AirPort Express (AX) to join the wireless network provided by the modem. The instructions are in KB 302153, AirPort Express: How to join an existing wireless network in client mode.

  • HT1515 How can I use Airport Express (1st generation) with OS X Mavricks?

    How can I use Airport Express (1st Generation) with OS X Mavericks?

    1st Generation AirPort Express will work fine with Mavericks.
    Are you sure that you have a 1st Gen Express?
    Check the model number on the side of the Express. 1st Gen is A1264.
    If you see A1084 or A1088, these are much older versions of the Express that were sold long before Apple began to use the Generation naming with "n" wireless devices in 2007.
    Mavericks will not support the A1084 or A1088. Use another Mac running Leopard, Snow Leopard, or a PC if you need to administer the older Express.

  • Why can't my Airport express be found by the airport utility?

    Why can't my airport express be seen by the airport utility?

    I have the same problem. 
    I have a Mac Pro OSx10.7.5, a Netgear router, A 1st gen Airport Express Model A1264 set up in Bridge Mode w/ LAN cable as Network 2 for Airplay, the iPad palys music and connects to the internet great through it. I want to extend Network 2 to another set of speakers in another room so I bought another AE A1264. "Like new"
    So far I cannot get the computer to see the new AE at all. I have tried it wired to the router, wired to the Mac, wireless near the 1st AE, I've reset it and restarted multiple times. It just isn't showing up at all. ZIP. I get a slow blinking yellow light.
    The Airport Utility "Configure Another"comes up with a Mac address I haven't seen before. I don't know if it's the new AE or not. In any case none of the passwords including "     " for a password work. It spins and I get an error message that "An error occured while reading the configuration"
    Even when it was new the first AE took some doing to be seen by my Mac which was plenty annoying since it should just pop up but it did eventually connect via LAN. Once I configured it it worked on my network.
    These things have been a real pain. Please advise.

  • Can I use airport express in a wired network to play music through my stereo?

    I originally used my 1st gen AE to wirelessly stream music from iTunes on my MacPro to my home theater.  This works, but there are some good days and some bad days where there are dropouts in the music.  I have recently run Cat6 cable to my HT from my router next to my MacPro.  This feeds a Gigabit switch that feeds the ATV, receiver, bluray, HD DVD, etc.  I plugged in the AE to the switch but it still defaults to the wifi network rather than taking a feed from the ethernet switch.  I know i can (and do) use the ATV (gen 1) to steam music, but sometimes it more convenient to use the AE.  Is there a way to force the wifi on the AE off and just have it for streaming from iTunes?  Thanks.

    Yes, you can configure an AirPort Express Base Station (AX) as a standalone wireless router without Internet access for the purposes of providing a Wi-Fi network for streaming. Note that any computers that will be the host of that stream would need to connect to this AX's wireless network while doing so. They would not be able to be connected to two wireless networks simultaneously for both streaming AND Internet access.

  • Can't configure airport express with laptop after 10.5.6 update

    I can't configure airport express with laptop after 10.5.6 update
    the airport express is seen but can't access configuration screen, I get the spinning wheel forever.
    Other computer gets to the configuration screen without problem.
    And the airport utility describes the airport express like this: syAP.802.11format

    I downloaded the airport utility and re-installed
    and the problem was solved

  • Can I use Airport Express as a Wifi Extender?

    Forgive my ignorance, but I just swithed to all Apple products a few months ago and I have a question about the airport express.
    We currently have one airport extreme base station set up in our house. The only problem is that the g signal for my iPhone won't reach quite far enough to get to the third floor (its a very long and tall home).
    I was wondering if you can use the Airport express as a wifi extender with no cords plugged into it, similar to the linksys extenders you can buy that extend the signal range.

    LukeW, welcome to the discussions!
    Yes, an AirPort Express could be used with your Extreme to "extend" the wireless network created by the Extreme. I assume here that you have an "n" capable Extreme.
    If you have an older 'g" Extreme, the Express could be used to "participate in a WDS" (wireless distribution system), which is a similar setup.
    It will probably take some experimenting to find the best position for the Express (you want it to receive as strong a signal as possible and "extend", so a good starting point would be to place the Express at a point that was roughly half way between the Extreme and the area that needs more wireless signal.

  • How many people can simultaneously share airport express network?

    How many people can simultaneously share airport express network?  I want to set up a wireless network in my classroom and need to accommodate about 25 devices.

    The AirPort Express will only handle 10 wireless connections.
    You will need to consider an AirPort Extreme....which will handle up to 50 wireless connections.

  • How can I use AirPort Express when traveling?

    How can I use AirPort Express when traveling?

    How can I use AirPort Express when traveling?
    Connect the AirPort Express to the Ethernet port in your room.....to be able to create your own private wireless network in your room for multiple devices.
    You will still have to pay the hotel Internet charge for one device, if the hotel charges for Internet access.
    If the hotel only provides wireless service, then a single AirPort Express will not help you.
    However, if you have two AirPort Express devices, then you can use one to "join" the hotel wireless network, then connect the second Express to the first using an Ethernet cable and create your own wireless network for multiple devices in your room.

  • Can't see Airport Express unit, nor Airport Express Setup in my Network Settings

    I can see my Airport Express in the Airport Express Utility App, lights are all green, but I can't see the unit, nor see the Airport Express Setup section inside my Network Settings. This is the case when trying to find the WiFi signal from 3 MacBookPros, as well as my iPad and iPhone (all running latest OS versions). I've been through the screenshots on line about how easy this is supposed to be to set up, but I cannot see the Express units at all. Oh, and I've downloaded the firmware updates and recycled the unit. No change. Bad Unit?

    Do you want the Express to create a wireless network?
    How did you configure the Express to connect to the Internet, and how are you connecting to the Internet now?
    Here are the instructions: http://manuals.info.apple.com/MANUALS/1000/MA1613/en_US/airport_express_80211n_2 nd_gen_setup_guide.pdf
    Let me know the page where you're getting stuck or where things aren't making sense.

  • HT4145 I have an Airport Extreme bas station now and I want to know if I can use an Airport Express to extend my network or do I have to use another Airport Extreme base.

    I have an Airport Extreme Base Station now and I would like to know if I can use an Airport Express to extend my wifi network or do I have to use another Airport Extreme Base Station.

    This AirPort Express:
    http://www.apple.com/airportexpress/
    It is the only Express with 2 Ethernet ports. All others are "old"
    Apple does not specify a model number in their product information, but it is A1392 in the U.S. I do not know if Apple uses different model numbers in other countries.

Maybe you are looking for

  • Comparing text box with empty string

    Here is the procedure how to do it - but it does not work for me. http://blogs.adobe.com/captivate/2010/12/few-tips-on-%E2%80%98advanced-actions%E2%80%99.ht ml Could someone please confirm if the procedure mentioned in the blog is working or not, and

  • Why do my other applications keep hiding?

    I have an external monitor connected to my iMac. When I have other apps running, I'll be using one app and the others will just hide automatically. I don't think all at once either. I've not had this before. I may have one opened on the left screen w

  • Camcorder Import Speed

    I connected my JVC DVL520U to my MBP via FireWire 800. When I import into iMovie HD, it's done in real time. Pardon if this is a silly question, but is there a way to get it to import faster than real time without sacrificing quality? MacBook Pro   M

  • Apple Mail trouble.  Can't drag, can't delete.

    All of a sudden yesterday, I couldn't drag emails to subordinate mail boxes.  Now, a day later, I can't even delete emails to the trash.  I am running Apple Mail 7.1 and have OS X Mavericks version 10.9.1. and made no changes to settings or updates p

  • About Chart types in IChart

    hai, Can some one plz explain me what is the need of going for Group Bar,Pie, Regression , Coustom Charts in IChart and im trying to plot Custom chart type with Tag Query values but iam not getting that chart with the TagValues plz can u tell with wh