Can't recall the Airport Express password

I've not been using my base station since Verizon came and installed FIOS and said I shouldn't use the base station in conjunction with their modem/router. I am aware this is not true and will get to that later. Tonight I want to listen to iTunes over my home audio system. In the past I've just hooked an iPod to my audio equipment but my iPod died this weekend.
I want to use the Airport Express to listen to iTunes. Plug Express into wall outlet, plug cable from audio equipment into Express, open Airport Utilities and enter password. ****! Have not used Express in over a year and don't remember the password!

Thanks, I was about to edit my last post but you beat me!
I reset the Express and Airport Utility recognized the Express. I used the password "public" as suggested in the directions. Utility suggested I update the firmware which I did and now I want to change the password and it keeps asking for a password. "public" is not working in this case.

Similar Messages

  • How can I get the Airport Express to handle all the PPPoE stuff?

    Hi, I’m visiting my family in China, and now trying to help my dad, with his Airport Express and how to set up a PPPoE connection.
    We have currently set up the Airport Express in bridge mode (not distributing IP adresses and selecting DHCP under the Internet tab in admin utility). The Airport settings on our two computers is set up to connect using PPPoE using the given login name and password. (ps! we can not see the Base station in Airport Admin Utility when using these settings, we would have to select a new location from the Apple menu to see it and make condigurations.)
    What we want is to do, is to have the Airport Express connect to the ISP using a PPPoE connection and not through the computer.
    I know there is a 'Connect using PPPoE' option in Airport admin util, letting me input account name and password. If I select this setting instead of DHCP, enable distribution of IP addresses and configure my Airport card to NOT connect using PPPoE, I will see my base station in the Airport admin util with the IP address of 10.0.1.1 (or similar) and my computer will have x.x.x.2. Next to the Airport icon in the menubar, a scrolling message will say 'Looking for PPPoE host' without anything happen. I am sure my account name and password is correct as they've both worked when using this computer to connect to PPPoE (like now)
    How can I get the Airport Express to handle all the PPPoE stuff without using bridge mode?
    Ps! Both me and my dad have iPhones whom we can’t seem to get to connect unless its been distributed an IP address cause there's as fars as I know, no options of inputing a PPPoE user name and password.

    Any solutions to this? I'm in China also, in Beijing, trying to get my Airport Express to work with an ADSL modem.
    Direct ethernet cable connection to my Macbook works fine.
    When I configure the Airport Express with the ID and password that seems to be fine also – Airport Express shows a green light.
    But I cannot figure out the settings to connect wirelessly from my Macbook to the Airport Express. I get a constantly scolling message: "Looking for PPPoEhost..."
    thanks
    Paul

  • Can I use the Airport Express to create a secure wireless network in a wireless-only hotel?

    Can I use the Airport Express to log onto an unsecured hotel wireless network, without an ethernet cable, to create a secure wireless network for my MacbookAir, IPad, IPhone, etc.? If so, how is that done?

    will the Airport Express allow you to log onto a hotel wireless network, and broadcast a secure wireless network in your room for your wireless devices, like the Ipad, Iphone, etc.?
    The bottom line with a single AirPort Express is no.
    The AirPort Express can only "extend" a wireless network when the network is being provided by another Apple router.
    As you might imagine, it is extremely unlikely that that the hotel network....which no doubt uses professional wireless access points provided by a manufacturer of commercial systems.....would be compatible with an AirPort Express.
    In many years of travel domestically and internationally, I cannot recall a time when a single AirPort Express would "extend" the signal provided by a hotel's wireless network.
    However, if you had two AirPort Express devices handy, you might be able to configure one to "join" the hotel network and provide an Ethernet signal to the second AirPort Express, which would be configured to "create" your own "private"  wireless network.

  • MacBook Pro that  my Airport Express WiFi profile was created crashed. Can i reset the Airport Express either to an iPad or Windows 7 computer?

    MacBook Pro that  my Airport Express WiFi profile was created crashed. Can i reset the Airport Express either to an iPad or Windows 7 computer?

    Get the Airport Utility for the your iPad from the App store. You will need to know the password for the Airport Express (not the WiFi password) to access the AE. The iPad utility will, I think, do all of the actions to control your AE.
    You can reset the AE back to factory default but with the iPad app you should not ned to.

  • HT1126 Can I connect the Airport Express directly to my wireless router?

    The old owner of my house set the Air port for my use, gave me a password ... when I tried it, the password never worked.
    DO not want to lose my old wireless system as it allows me to do more than just the Air Port.
    should I reset the system?

    can i connect the airport express into an ethernet port in the wall
    I assume you are asking about obtaining an Internet connection here.
    First, temporarily turn off the wireless on a laptop and connect the laptop to the Ethernet wall jack with an Ethernet cable. Can you log on to the Internet this way?
    If yes, then you can connect an AirPort Express to this Ethernet port and configure it to provide a wireless signal for multiple devices.
    If no, then you can connect the Express, but you will not have an Internet connection.

  • HT1515 can I make the Airport Express secured so no one else can use it?

    Can I make the Airport Express secured so no one else can use it?

    Choose a security protocol, WPA2 personal suggested. Then choose and install a strong password. Only users who are cognizant of your password will be able to connect to your wifi network. Of course, you'll need to do this via your Airport Utility application.

  • Can you use the Airport Express A1264 as an AP and a DHCP server at the same time?

    Can you use the Airport Express A1264 as an Access Point and a DHCP server at the same time?
    I would like to use it as a DHCP server and AP at the same time in my LAN (no internet, just local machines through a few switches). I was lead to belive this could be the case from a few networking friends that haven't been friendly enough to help me out setting it up.

    I need it to act as a dLink/Cisco/Linksys/etc basic wifi router, in the fact that you can access it via wifi, and it will spit out DHCP addresses (192.168.1.xxx) to everything wired downstream of it.
    I want to simultaniously provide a Wifi connection and a LAN connection at the same time
    Thanks,
    BRad

  • Can i use the airport express in my hotel with wired connection?

    I'm going to be traveling quite a bit coming up and staying in hotels with wired internet connections in the room.  Can i use the airport express to connect with the hotel's internet connection and then my ipad and/or iphone 4S?  I'm new to Apple products so will certainly appreciate any info that may help.  Thank you!

    You will need to have AirPort Utility installed on the iPad and/or iPhone. It is free on the App Store
    App Store - AirPort Utility
    Connect the AirPort Express 802.11n to the hotel Ethernet jack using an Ethernet cable
    Power up the AirPort Express and wait 40-45 seconds
    Tap Settings, then tap Wi-Fi on the iPad
    Tap the AirPort Express under the heading of Set up an AirPort Base Station
    AirPort Utility will take a moment to to analyze the connection and then you can proceed with the easy guided setup
    Once the AirPort Express is configured, you should not have to set it up again at the next hotel. But, you could if you want to.

  • Can i plug the airport express into the UPS i use for my computer or must it be plugged into a wall outlet?

    Can I plug the Airport Express into my UPS/APC or must I plug it into the wall outlet?

    Bernadine65 wrote:
    Can I plug the Airport Express into my UPS/APC
    Sure.  
    I live in central Florida, lightning captial of the US, and wouldn't plug anything electronic into the wall directly.
    My Airport Extreme (and external HD attached to it, and cable modem) are plugged-in to one;  my iMac, external HD, and answering machine to a second; and my cable box and TV into a third.

  • Can I use the airport express with a desktop computer that is not wire less- I want to have wifi in the house for an iphone

    Can i use the airport express with a desktop computer not wifi- I want wifi for my iphone

    I can't seem to find any information anywhere.  It seems like it should work since the AX is showing up on his wifi settings on both his iPhone and iPod.  Not to mention the Apple "Genius" told him that it should work.  However, they also told him that it came with an ethernet, USB and the stereo patch cables...

  • Can I use the Airport Express as a cable modem?

    I am trying to set up wireless internet in my home, and I am planning to purchase an Airport Express. Can I use the Airport Express as a cable modem, or do I have to purchase a modem from the ISP and then connect the AE to the output of the cable modem?
    Thanks,
    Adrian

    No, the AirPort base stations do not perform the functions of a DSL or cable modem, so you will still need to acquire one.

  • Can I plug the airport express into 220v?

    I want to buy the airport express to use in Manila which has 220v standard. Can I plug the airport express directly or should I use a power transformer?
    Any insight would be greatly appreciated.
    Thanks,
    Toni

    It is a worldwide capable, auto-ranging 100 ~ 240v device - you just need the right cable/adapter. Apple sells a travel adapter kit if you need one.

  • My computer can't find the Airport Express signals anymore

    I'm having some weird issues with my MacBook connecting to my Airport Express at home. 2 years ago I installed my new Airport Express and made a WPA Personal security password as recommended. Everything worked fine until Sunday my computer seemed to not find the signals anymore. I have tried all types of problem solving from the book and other places, but nothing seemed to help.
    The weird stuff is that my other 2 Mac computers have no problems connecting. The others the signals fine.
    My computer picks up all other wireless signals from the neighborhood.
    How can this be? I did nothing but turn my computer on and off and suddenly all "domestic signals" are non traceable any longer?
    I hope someone can help me; I am, as you probably can understand not a computer literate exactly.

    I have to switch between my internet 2Wire network and the AX base station network I created.
    If you configure the AirPort Express (AX) to join the wireless network provided by the 2wire you won't need to switch back and forth. There will only be one wireless network.
    My husband wanted to print with his MacBook Pro the same way, and so we tried to configure the base station on his computer.
    That was not needed. Once the base station is configured, any wireless client can join the network without needing to run any AirPort software.

  • My MAC can't find the airport express...

    I'm having problems hooking up Airport Express to airplay. My MAC can't find it...wireless network is working fine, I have Klipsch speakers working fine over Airplay...but Airport express will not connect to my network. Help!

    Apple's "extend a wireless network" setting is proprietary feature that is designed to work with other Apple routers on a network.  Unfortunately, it is extremely unlikely that this feature would be compatible with a 3rd party router.
    The solution is to connect the AirPort Express to your main router using a permanent wired Ethernet connection and configure the Express to "create a wireless network" using the same wireless network name, same wireless security and same password as the main network. 
    Another possible solution would be to to ask your Internet Service Provider (ISP) if they offer a compatible device that will "extend" the main router using wireless only.

  • Can't Get The Airport Express Working

    OK, So I have researched the forums and tried many different options. My issue is a follows. I have an Airport express G version. It came from a friend and worked fine. When I got it I did a factory reset to clear it all out. I Put the paper clip on the reset, plugged it in and waited for the 4 green flashes. I then plugged it into my laptop through ethernet. All I get is the flashing amber light. I tried to power everything down and then wait 15 minutes per item on the reboots. Still only a flashing amber light.
    As a note when I hook it up to my router through ethernet it is steady green.
    In all cases I cannot get it to show on the Airpot Utility. Everytime I hit rescan I get nothing found.
    Please help!!

    ccathcart wrote:
    I Put the paper clip on the reset, plugged it in and waited for the 4 green flashes.
    actually, to do a +factory restore+, you should unplug the AX, stick in the paperclip while you plug it back in and keep the reset button depressed until the AX flashes amber rapidly (5-10 seconds)
    I then plugged it into my laptop through ethernet.
    you need to connect the AX to your router with an ethernet cable
    As a note when I hook it up to my router through ethernet it is steady green.
    that's what you want. If you connect the airPort express to your router with an ethernet cable, the airport express can be configured to create an extension of your main network if you use the same name, wireless mode, security and password as the main network.
    post back if you require further assistance

Maybe you are looking for