Can't recharge on mobile anymore since 3 days

Hello everybody,
can someone tell me what's wrong?
I haven't been able to recharge on my mobile since 3 days, before that there was no problem doing this.
Hope to hear from you!
wilma

Hey Obeidattimour,
Thanks for the question. If you are experiencing issues connecting to the iTunes or App Store, the following resource outlines troubleshooting steps that may lead to a solution:
Can't connect to the iTunes Store - Apple Support
http://support.apple.com/en-us/TS1368
Thanks,
Matt M.

Similar Messages

  • Router Can't see My Website Anymore since changing its DNS

    Neither my old Panther G5 nor my new Macbook running Leopard can see my website anymore since I changed its DNS settings (after server failure we had to move).
    I use a Belkin 4-port router FSD5231-4, which sees all other websites on the web now, but not mine. Everyone else in the world, except me, can see http://www.goodnewsnetwork.org.
    when mac is plugged straight into the cable modem it sees the website fine. Only when the router is in the mix, does the site go awol.
    Belkin said I had to download an .exe file in order to reset the MTU settings. After I insisted there must be a way without using .exe, he said to go into Mac settings to reset MTU to 1400 (the ideal range is 1400-1500). When Apple support showed me how to get in to change the setting of MTU, we found it was already set to 1500, and didn't change the outcome.
    Good News Network is still awol.
    I looked on Belkin for firmware updates but my model number (above) returns "No documents found". I think updating would be a great idea.
    Also, I tried resetting w the little hole in the back, but nothing changed (the paper clip wasn't able to push in the back of the hole at all, it seemed).

    You shouldn't need to change the MTU on your router, nor should you need to factory reset it; a simple power cycle of it should be all you need if it's got your old DNS information cached.
    I suspect your Mac may have the address cached as well.
    Try shutting down your Mac, power cycling the router, then booting the Mac and see if that works.

  • HT1222 Can't disable voice-dialing anymore since upgrade to iOS 7.1

    I need to be able to disable voice-dialling on my iPhone4. I keep accidentally calling random contacts while using voice commands to control music on my motorcycle bluetooth headset. If this isn't fixed in the next "upgrade", I will be forced to change to an android phone. NOT HAPPY
    iOS 6 worked great on my phone. Wish I had never upgraded to iOS 7, let alone 7.1.

    I have a Zagg KB and it works well.
    First reset the iPad by holding the home and power keys down until the Apple logo appears (15-20 seconds).
    Be sure (stating the obvious) Bluetooth is turned on. Turn the Zagg KB on...it should start to hunt for the wireless network. Press the connect button on the Zagg KB - the red light should begin to blink. On the iPad (settings>Bluetooth) click on the Zagg.
    Barry

  • Can't lock the screen anymore with a password

    I can't lock the screen anymore since I installed Mavericks. I have assigned a password to the screensaver in the system preferences, but when I activate the screensaver on my iMac 8,1 it does not ask for the password when I wake it up from sleep. I have checked the option in the security preferences that the Mac should ask for a password immediately.
    Any idea how the enable the password?

    Okay, the problem is solved. I don't really know how - I just restarted the mac several times and now it works.

  • I can't seem to get my iMac (late 2009 model) into automatic sleep mode.  If I manually put it into sleep I don't have any issues.  I used to solve the issue by running "PleaseSleep" application but that doesn't work anymore since Lion.

    I can't seem to get my iMac (late 2009 model) into automatic sleep mode.  If I manually put it into sleep I don't have any issues.
    I used to solve the issue by running "PleaseSleep" application but that doesn't work anymore since Lion. I now want to fix the underlying problem.
    I'm not running any weird background processes and in my energy saver settings I've tagged "put the hard disk to sleep when possible:, "allow power button to put computer to sleep" and "automatically reduce brigthness". All pretty standard.
    Is there anyone who can give me some pointers ?

    Today I solved the same problem for my iMac running Snow Leopard. See https://discussions.apple.com/thread/3008791#15947706. The method may help you, too.
    For me it was the DynDNS Updater preventing my iMac from automatically entering sleep mode.
    To my knowledge the cause of this sleep problem can only be a peripheral device or a process. So I suggest to first unplug all peripherals and test whether that's the cause. If not, I suggest to terminate one process after another and to test automatic entering of sleep mode after each. Start with user processes; continue with system process if necessary.
    At least that's the way I found the offending process. Fortunately, I was able to change the configuration of that process to allow again automatic entering of sleep mode.
    Good luck!

  • HT1338 I wonder if somebody can help me. I am not able to use my internet bank anymore, since Java launched their latest update (7.51). Appearently this one is not compatible with my hardware. I am using Mac OSX version 10.6.8, and Java version 17.0. Than

    I wonder if somebody can help me. I am not able to use my internet bank anymore, since Java launched their latest update (7.51) a few days ago. Appearently this one is not compatible with my hardware. I am using Mac OSX version 10.6.8, and Java version 17.0, which seems to be the newest one for my op sys. Anybody know how I can solve this? In advance thank you!

    Apple support article to enable Java 6.
    Java 6 Enable

  • Can't import photos in Indesign anymore since I upgraded to Lion.

    Can't import photos in Indesign anymore since I upgraded to Lion. The first time it wil work, afterwards the button 'open' turns gray.
    Where is the bug?

    DJDannyBoi wrote:
    I used to be able to see the progress of all my download in its own widow and now that does't pop up anymore since the upgrade. I really liked that feature and want it back. Is there anyway to get that back?
    Glad I could be of help...
    Happy Computing!

  • I cant call to a mobile number since yesterday, but can receive call from the same number. I am using iphone 4s. Is there any setting error?

    I can't call to a mobile number since yesterday, but still can receive call from the same number. I am using iphone 4s. Is there any setting error?

    you have to make sure that CFWD Bridge Mode under the Line tab of the SPA9000 where the SPA400 is registered is set to ALL...include VMSP Bridge and XFER Bridge Mode as well..power cycle then check if you are still getting one-way audio
    | isolate! isolate! isolate! |

  • I can't open any program anymore an my ipod since the last 30 minutes, no more games and social network programs. What is wrong with my ipod.Please help

    I can't open any program anymore on my ipod since the last 30 minutes, please help

    Did you try to reset the device by holding the sleep and home button until the Apple logo come back again?
    If this does not work, set it up again "as new device", shown in this article: How to set up your iPhone or iPod touch as a new device

  • I can't Import .tif in illustrator CS4 anymore since Yosemite. Someone have this problem ? Can you help me please ?

    I can't Import .tif in illustrator CS4 anymore since Yosemite. Someone have this problem ? Can you help me please ?

    Pat,
    Did you reinstall after updating to Yoesmite?
    If not, you could try to reinstall using the full three step way, and see whether things work.
    Uninstall, run the Cleaner Tool, and reinstall.
    http://www.adobe.com/support/contact/cscleanertool.html

  • I bought Office Mac 2011 and can't launch Outlook anymore since I upgraded to Mountain Lion 10,8,2

    I bought Office Mac 2011 and can't launch Outlook anymore since I upgraded my OS to Mountain Lion 10,8,2.
    Did someone encounter the same problem? Do someone propose a solution?
    Decided to download the last update 14.2.5 Office 2011, but doen't help.
    Thanks in advance for your help.

    hi mb01915
    Encountered the problem before upgrading to MS 14.2.5 office for Mac.
    Did hold the control key and opened the DB utility but how kan I rebuild the identity? No steps are proposed.
    Should I need to reinstall Office 2011?
    Thanks in advance for your feed-back

  • HT4007 What happened to my keywords? Since the last update of aperture I can't see my keywords anymore! Who will help me find them back?

    What happened to my keywords? Since the last update of aperture I can't see my keywords anymore! Every photo (1000s of images) had several keywords, but they're all gone. (Or at least I can't see them anymore.) Who will help me find them back?

    You need to enable the display for metadata in Browser and Viewer.
    There are several places how whereyou can turn it on; for example, from the main menu bar "view" menu:
    View > Metadata display > Viewer > Show Metadata
    View > Metadata display > Browser > Show Metadata
    You need to configure the Metadata shown in these overlays.
    Use
    View > Metadata display > Browser > Customize
    Enable all tags you want in the left column of this panel. The "keyword" are enabled in the "Content" section of the left colum.
    Regards
    Léonie

  • My mobile is getting hang since last 1 hour, torch of mobile is still on and the touchscreen is not working, I can't unlock my mobile. Can anyone help me to fix it

    My mobile is getting hang since last 1 hour, torch of mobile is still on and the touchscreen is not working, I can't unlock my mobile.
    Can anyone help me to fix it?

    Please press the power- and the homebutton simultaneously until the apple logo will appear ( 10 sec.). That´s it.

  • Yesterday, since I downloaded the lastest version 3.6.6, every time firefox opens and when I click on something, I get multiple error windows that say "ERROR: Security Manager Vetoed Action. I can't hardly use if anymore because of all the window pop-ups

    Yesterday, since I downloaded the latest version 3.6.6, every time firefox opens and when I click on something, I get multiple error windows that say "ERROR: Security Manager Vetoed Action". I can't hardly use if anymore because of all the window pop-ups. What can I do? Can I go back to an older version?
    == This happened ==
    Every time Firefox opened
    == I downloaded version 3.6.6 yesterday

    hello, when this is happening after you've already updated firefox with your admin account, try to delete the ''updates'' folder and ''active-update.xml & updates.xml'' within the %localappdata% folder of your restricted account like it is described in http://kb.mozillazine.org/Software_Update#Software_Update_not_working_properly

  • I have 11 dollars on my itunes and i wont use it anymore since i gave up my iphone so can i transfer that 11 dollars to my debit card???

    I have 11 dollars on my itunes and i wont EVER use it anymore since i gave up my iphone so can i transfer that 11 dollars to my debit card???

    No, sorry, you cannot, nor can you transfer the balance to someone else's iTunes Store accounts. But you can buy music, TV shows, or movies, if they're available in your country, and play them on your computer.
    Regards.

Maybe you are looking for

  • VS2013 - Something related to app config - How to remove "Could not find schema messages"

    All of the sudden, I am getting many "Could not find Schema" messages in my Windows Form App. Why is this occurring ?  How to fix it ? I tried deleting the app.config and regenerating it.  That did not work. Thanks 

  • Statement close

    Hello Community, What does happen, if i don't close the java.sql.Statement. Is suspend by server thread? When is it closed?

  • Text file into Forms

    Hi suppose in text file the data is No Name 1 abc 2 xyz and a table st_rec that has attribute no and name and i want populate my form field that are no and name with text file data and populate i can store this data into database. how i can.... Thank

  • Error message after rental from ATV

    Just rented a movie from Apple on my Computer. Moved it to ATV to watch and get the error message"Apple TV is not authorized to play this content". Went through the reset process/reboot process(unplugged ATV) Restarted Computer-no help. Any ideas?

  • Columnwise Sorting Of CheckBoxGrp attributes

    Hi All, I have to implement the below. Display all the Users using a check box group with 4 columns. The displayed users in this need to be sorted column wise. i.e. say there are 48 users sorted alphabetically, I have to display the first 12 sorted u