Can't reconnect some files!

i moved my project to an external drive and reconnected everything successfully. A couple of days later though, the drive accidentally unplugged and everything went offline. I pressed reconnect media and everything showed up as reconnected in the browser window, but in the timeline, some files still say offline and everything needed to be rendered. Rendering didn't help. The clips that are offline in the timeline aren't playing back correctly, they just play as still images in the canvas. please help! i've tried restarting and reconnecting so many times. Again, in the browser, none of the clips say offline.
g4 powerbook   Mac OS X (10.4.9)   laptop
g4 powerbook   Mac OS X (10.4.9)   laptop

Did you repair your disk permission? If not you may try that.
Since FCP had the project up okay at a previous time you might also try to "Restore Project."
In FCP go to File>Restore Project and pick a time that you knew everything was okay,

Similar Messages

  • Can't reconnect PSD files.

    Hi
    My partner (Final cut Studio 2) send me a project file. We're collagorating on this project. I have FCE 4.5.
    I was able to reconnect all the media but he also sent me some layered PSD files. I can see them in the finder, but when I try to reconnect them, I get an error msg "The file does not have enough video tracks to reconnect to stripe at time 00:00:00;00 in sequence "xxxx.psd. Click okay to make this item independent and go to the next clip or Cancel to skip all clips from this file"
    I'm still learning this FCE. How can I reconnect these files fo my FCE sees them? All the video clips have been reconnected and rendered and play fine on my MBP except for these PSD files.
    There's 3 sets of layered files in the sequence. Should I add more video tracks or shouldn't FCE put in what it needs?
    Allen

    It's in the sequence and on the timeline but showing off line. Anyway Mike said if I re-imported them I'd loose the layers. There's 3 sections, 1st is all the layers, then each of the 2 graphics are seperated one at the begining and one at the end. they're title seq.
    He said he'd show me what to do when we meet. See, we each have a copy of the video clips. He does his work in Studio 2 and saves his stuff to his raid. Sends me the project file to open in FCE. So I have to reconnect the files and tell MBP they're on my external LaCie. Everything went good except for those PSD files. All of the info was in the CFP project file plus he sent me the graphics seperately. this is a wierd deal for me!
    Thanks anyway. I'll let you know what happens.
    Allen

  • Installation Failed The installer can't install some files in "/".

    The full message is
    Installation Failed! The installer can't install some files in "/". Contact the software manufacturer for assistance.
    I first received this message when trying to upgrade Pro Tools from 8.0 to 8.0.1 a prerelease for snow leopard. I tried numerous things such as repairing permissions, as well as some pro tools specific things and to no avail. Still got the same error message.
    So then I tried completely uninstalling and deleting all things pro tools from my computer. After a clean uninstall and removing all traces of pro tools I proceeded to try and re-install pro tools from my pro tools 8 disk. About a minute into the process I get the EXACT same error message.
    I know this issue has been going on since even before snow leopard. I really need to get pro tools installed and running again or at least be able to get the program installed. I've isolated pro tools out of the mix because its been several different installers and even an installer from a dvd. I know this is a Snow Leopard or plain OS based problem. I have repaired permissions, created a brand new user, wiped clean and started over. I don't know anything else to do. PLEASE HELP???!!!

    Hi Dean@mac & welcome to the forums...
    Any specifics why it wants to install to / instead of Applications, as an example?
    Seen these threads yet?
    http://discussions.apple.com/search.jspa?search=Go&q=pro+tools
    One thing to help investigate the issue is to create a new user just for testing that is stock with no add-on's etc., then login there and try to install. If it works there you can bet there is something unique to your original account that is borking that install - otherwise the issue is most likely global to your system and you might be out of luck until/unless a reportedly qualified version becomes available, etc.
    Good luck in any case.

  • I am receiving a notification that says that I am running out of storage space. I backed up time mating to an external hard drive. Can I delete some files to make room?

    I am receiving notifications that I am running out of storage space. I backed up my mac book using an external and time machine. Can I delete some files to make room?
    If so,
    When I want to restore from my time machine, can I pick and choose, say certain songs, photos or documents?

    About TM "Backup Drive is Full"
    Alert TM only deletes older files if they have been deleted from the source and when TM needs space on the backup drive for a new incremental backup. Time Machine "thins" it's backups; hourly backups over 24 hours old, except the first of the day; those "daily" backups over 30 days old, except the first of the week. The weeklies are kept as long as there's room.
    So, how long a backup file remains depends on how long it was on your Mac before being deleted, assuming you do at least one backup per day. If it was there for at least 24 hours, it will be kept for at least a month. If it was there for at least a week, it will be kept as long as there's room.
    Note, that on a Time Capsule the sparsebundle grows in size as needed, but doesn't shrink. Thus, from the user's view of the TC it appears that no space has been freed, although there may be space in the sparsebundle.
    Once TM has found it cannot free up enough space for a new backup it reports the disk is full. You can either erase the backup drive and start your backups anew or replace the drive with a larger drive. You can also use the Time Machine application to selectively remove files, but that may be ineffective if you have to free up GBs of space.

  • How can i stream some files via my macbook pro

    how can i stream some files via my macbook pro and my WD TV LIVE

    Which email client are you using & which version?   Your emails are not appearing in the email trashcan? 

  • I can't see some files in web

    I can't see some files, or videos, in web, I can't download adobe player

    Well, I don't know what the problem actually is in the first place, it should work as is, I think something is messed up with the present driver and replacing it would perhaps get around that problem.
    It seems like I'd be adding one more layer of complexity to the Vista machine...
    Not sure how the Vista machine is involved in this, since these are drivers for the Mac.
    Though to involve the Vista Machine, One option not mentioned yet is MacDrive for you PCs... allows them to Read/Write HFS+...
    http://www.mediafour.com/products/macdrive/

  • Hi, I migrated from PC to Mac, but I can't find some files I had in the PC, this files were invisible but just before migrating I switched off the "hidden" option, ¿Does this files migrated as hidden files or they didn't migrated?

    Hi, I migrated from PC to Mac, but I can't find some files I had in the PC, this files were invisible because I had them as hidden but just before migrating I switched off the "hidden" option, ¿Does this files migrated as hidden files or they didn't migrated?

    If the filename starts with a dot (.thisfile), then it will be hidden on the Mac.
    You can use a 3rd party App, such as EasyFind to search for the file on your Mac, and then re-name (remove the dot)

  • How can i put some file (xml) in root apk?

    how can i put some file (xml) in root apk?
    I put fileA in flash builder mobile project.
    build apk.
    fileA  →  "main.apk/assets/fileA" . 
    expect → "main.apk/fileA" .
    PS: view apk by Winrar.
    I have a Demo Android java project.
    It uses armeabi/libcasdkjni.so .
    build apk
    ↓
    +assets
    +lib
    +META-INF
    +res
    -AndroidManifest.xml
    -classes.dex
    -CopyrightDeclaration.xml
    -mmiap.xml                                                       ←   fileA
    -resources.arsc
    -VERSION
    i build an ANE include armeabi/libcasdkjni.so.
    apk is missing mmiap.xml

    all files will be embed in "assests"(floder in apk ,which includes swf file) in that way.
    build apk
    ↓
    +assets                                ←         "assets"
    +lib
    +META-INF
    +res
    -AndroidManifest.xml
    -classes.dex
    -CopyrightDeclaration.xml
    -mmiap.xml                                                       ←   fileA
    -resources.arsc
    -VERSION

  • Can't copy some files from FileVault Sparsebundle in Time Machine backup

    I've got filevault turned on for my mac Mac Mini (10.6.2). I'm using Time Machine to back up to a firewire drive. There's plenty of space - my Mini hd has 250 Gb of 500 used, and I'm backing up to a 750Gb partition on the external drive. The initial backup went OK, and when I logged out it backed up my filevault-protected home directory. When I logged back in, I was able to browse the Backups.backupdb on the external drive, go to the users directory, and open the sparsebundle that was my filevault-protected home directory (after entering the password). I can browse through this backup of my home directory. However, when I try copying files from the backup of the home directory, I get an error:
    The Finder can't complete the operation because some data in "(filename)" can't be read or written. (Error code -36).
    I get this error for some files, but not all of them. I've tried running BatChmod to reset permissions on all files in my home directory, and then erasing the backup drive and having Time Machine recreate the backup. However I'm still having this problem.
    I have also tried restoring the entire hard drive (to a 3rd external HD) by booting from the 10.6 DVD and going through the full-restore process. All of my files are fine when I restore using this method.
    Is there something I should do so that I can restore individual files from the backup of my filevault sparsebundle? It is extremly inconvenient to have to do a full hard drive restore if all I want is a file or two, and of course if the motherboard on my mini dies and I can't get a close enough replacement computer, then I could really be up a creek.
    Thanks,
    John F
    New York

    feinberj wrote:
    I've got filevault turned on for my mac Mac Mini (10.6.2). I'm using Time Machine to back up to a firewire drive. There's plenty of space - my Mini hd has 250 Gb of 500 used, and I'm backing up to a 750Gb partition on the external drive. The initial backup went OK, and when I logged out it backed up my filevault-protected home directory. When I logged back in, I was able to browse the Backups.backupdb on the external drive, go to the users directory, and open the sparsebundle that was my filevault-protected home directory (after entering the password). I can browse through this backup of my home directory. However, when I try copying files from the backup of the home directory, I get an error:
    The Finder can't complete the operation because some data in "(filename)" can't be read or written. (Error code -36).
    I get this error for some files, but not all of them. I've tried running BatChmod to reset permissions on all files in my home directory, and then erasing the backup drive and having Time Machine recreate the backup. However I'm still having this problem.
    I have also tried restoring the entire hard drive (to a 3rd external HD) by booting from the 10.6 DVD and going through the full-restore process. All of my files are fine when I restore using this method.
    Is there something I should do so that I can restore individual files from the backup of my filevault sparsebundle?
    Don't try to restore files individually by hand using finder. TM backups are protected by very restrictive ACLs and are not designed to be accessed that way.
    you can restore the whole sparse bundle with the home directory from TM interface. you should be logged in as a different user when you do this. the easiest is to be logged in as root so as not to deal with any permissions issues.
    another thing you might try is doing it from command line instead of finder. this is also not the designed way but might work where finder copy doesn't.
    to do this run the following terminal command after you mount the sparse bundle with backups of the home directory
    ditto --noacl path/to/source/file /path/to/target/directory
    here path/to/source file is the path to the file in the sparse bundle you want to restore and path/to target directory is the path to the folder where you want to copy it to. an easy way to get the path to an item is to drag that item to the terminal window. make sure that you have all the spaces correctly in the command.
    It is extremly inconvenient to have to do a full hard drive restore if all I want is a file or two, and of course if the motherboard on my mini dies and I can't get a close enough replacement computer, then I could really be up a creek.
    Thanks,
    John F
    New York

  • How can I print some files in ipad

    Dear tutors
    I am using Airport express to enjoy airplay and itunes in Hi-Fi system.
    My printer that doesn't support airprint is connectted to the Airport express.
    So I can print my file to the printer when I use window PC.
    Recently, I bought ipad2 and I'd like to print some files in ipad
    How can I do?
    Is it possible?
    Thank you..

    I think the Airport express acts as a wireless printer server because I can print when the PC is turned-off
    Actually, I'd like to print some files from my ipad2 to my printer that dosen't support Airprint and that is connectted to the airport express.
    There are apps on the appstore that allow you to print to non airprint printers.--> I could'd find the Apps, would you tell me the name of the Apps?
    thank you

  • Can't copy some files from Windows 7 to Mac OSX over network

    Hi,
    I'm running the latest version of Max OSX v10.8.4 on a brand new Macbook Pro.
    I have followed the setup instructions at http://www.7tutorials.com/how-change-workgroup-mac-os-x-easy-networking to access my Macbook from Windows, and http://www.howtogeek.com/howto/24950/how-to-share-a-folder-in-os-x-with-windows/ to share some folders from my Macbook to Windows.
    I am now trying to copy some files from my Windows 7 Pro (SP1) computer to my Mac, and have hit the following problems:
    I can view my Macbook in my list of local networked computers on WIndows, but I cannot access it. Clicking on it causes Windows 7 to try and access it, but then I get a message after a minute saying the network path could not be found. However, if I manually enter the IP address of my Macbook in the Windows address bar (\\192.168.0.191), I can view and access all the shared folders. I can never access the Macbook via it's computer name (\\MACBOOK-ROB).
    I cannot copy some files from Windows to my Macbook shared folders via Windows. There is nothing to distinguish these files from the hundereds of other files that I have successfully copied to my Macbook. They are pictures and music with no special characters in the filenames, not overly long filenames or folder paths, no access restrictions, or any other security restriction that I can see. However, every single attempt to copy these files to my Macbook results in WIndows reporting that access to the destination was denied.
    I have tried both these above scenarios on WiFi and Ethernet, and the results are the same.
    So:
    Why am I unable to access my Macbook by it's computer name on the network? How can Windows see it, but not access it?
    What are the limitations on transferring files over SMB that is (presumably) causing these specific files to fail?
    Thanks for any help you can offer.

    I have a fix for inability to copy files. I had the same problem moving a lot of old files across my LAN from a Windows XP machine to a Mac Mini running Mountain Lion. After confirming copy of some special file, I would get an error that terminated the copy operation, and info on the Mac side would show a locked folder.
    I finally decided to eliminate all special files on the Windows side, before copying, by running
         attrib -s -h -r /s /d [drive or folder]\*.*
    in a command window. Running attrib /?  tells what the arguments mean, but it doesn't explain that you need the *.* to make the command go through the hierarchy clearing the special attributes on all the files.
    After I did that, and then used drag and drop between two Windows Explorer windows (one on the Windows drive, on on the target drive on the Mac), the whole move operation ran to completion without stopping either for error or to ask for confirmation.
    I do not have a fix for the inability to access some computers by name rather than by IP address. I'm looking into the possibility of activating bind on the Mac but I haven't done anything yet.

  • I can't put some files in the Trash

    Hello everyone,
    Unfortunately, I'm having some trouble putting some files in the trash...
    They say they're adobe dreamweaver files, but I've never installed dreamweaver - I was only flagged up about them when I tried to install dreamweaver, and was told that it was already installed and I needed to remove any files etc.
    So I did a search for all adobe or dreamweaver files, and sure enough there they were. I consequently tracked to whack them all in the bin, but to no avail. The computer would say "this will permanently delete the file, are you sure?" - I would click yes, and it froze for a moment every time I tried and then popped up with this error message:
    "Sorry, the operation could not be completed because an unexpected error occurred
    Error code -61"
    Here's a screen grab:
    http://img78.imageshack.us/my.php?image=picture2cb3.png (the error message)
    http://img213.imageshack.us/my.php?image=picture3sx0.png (the files in question are highlighted)
    If anyone knows how I could delete these, that would be extremely helpful...
    I've tried the get info, unlocking trick, and there's been no joy there - the read only options are faded out and not possible to change. I've also tried TrashIt, which was recommended, and didn't work...
    Any ideas would be very kind, thanks...

    I can't find my OSX disk
    I don't really understand this (that disk shows up in the screenshot you uploaded of the Finder window resulting from your search), but I also think it's irrelevant.
    I went back and read your original post, and I saw this: 'The computer would say "this will permanently delete the file, are you sure?"'. I've since seen another entry in this Topic List which indicates that you get such a message when your .Trash folder is gone. (Of course, there may be other reasons why you can get the message too.) If that's true, then you really need to fix it. One easy way to find out is, try creating an ordinary file in your home directory, and then drag it to the trash? Does that work? I suspect you'll get the same message about "this will permanently delete the file, are you sure". But if you say "yes", it should succeed in deleting it. But it does indicate that your .Trash folder is probably gone.
    if I create a new account that is also an administrator, then bin them, are you sure this will work?
    (I assume that by "bin them", you mean "drag them to the trash".) In fact, you can just create a new account that isn't an administrator (unlike what I said in my previous post). If that account drags the stuff to its trash, Finder will prompt it for the name of an administrator account (like, yours), and its password. If you provide it, then empty that account's trash, the stuff should go away just fine.
    Incidentally, the Subject of the item I mentioned above is "Trash deletes any file without emptying".
    If I'm right about your trash not working, and you want a way to "fix" it, you can get back. Or maybe make a new problem.

  • Can't see some files, even though I know they are there

    This is a strange one.
    A couple of days ago, I began not being able to see most of the folders in my documents folder. I can see some, but not most.
    I know the files are there, because I can access recently used files from the applications like Word and Excel that have a recent files list. And, they are working fine.
    I just can't see the bulk of my folders. I've checked the things that occurred to me on security and sharing, and I don't think I changed anything or added any new software.
    Any guesses? Thanks for your help.
    Mitch Goldstein

    Got my answer. I had moved the files (or someone in my family did), and they were deeply buried in another folder. Thanks.

  • Please how can I add some files in my iPod 4 , when I have got only Ipod, and cable?:// thank you

    I would like to put some files to my iPod 4, but I have only iPod and cable... I cant copy anithing to it:(

    What files?
    Do yo have anm apps that can use thjos fioes?
    The common way is to use the FIle Sharing associated with the app.
    To sync to your iPod go to iTunes>Help>iTunes Help>Sync your iPod....>Sync You Device>Transfer files and follow the instructions.

  • DVD SP can't find some files-won't start

    When I try to open a major DVD SP 3 project, which worked last week, DVD SP states that it cannot find some files and that the project cannot open without them: "The movie file "Sequence 1-FIN-00000005" cannot be found. Without this file, the movie cannot play properly." I have to Force Quit DVD SP and cannot open the project. Other files complained about include 1-FIN-0000003b
    Since I last opened the project, one of my external Firewire hard drives has failed - it will not switch on or run up or mount. That HD contained the scratch for FCE from which the movies (.mov) files for the DVD SP project were created.
    Could it be that some of the movies that DVD SP can't find are Reference Movies which rely on a Sequence in one of the FCE projects on the faulty disc, which would explain whey DVD SP can't find them?
    If so, how do I recover from this? The originating FCE scratch disc is lost, being on the failed HD. How can I force DVD SP to open the DVD SP project and THEN complain? That would allow me to delete the missing movies, recapture the shots from my camera into FCE, run the FCE project (which is on my internal HD), output the movies again but as stand-alone movies, and reinsert them in DVD SP's Assets and rescue the project. As it is, I cannot even identify the movies that DVD SP complains about
    Help! A serious problem.

    SOLVED! I can now get the project to upen by tricking DVD SP into finding that the files are MISSING rather than that they are REFERENCE MOVIES which cannot find their "parent" Final Cut Sequence. Here's how:
    Examine all the QT movies that the troublesome DVD SP project needs acces to (they will be in your Media folder). Open each movie and if QuickTime can't display any of them by reporting that it cannot find a file called something like "Abcde - FIN-0000008", that means that the movie is a reference movie, which means that it depends on the Sequence in your Final Cut project file which created that reference movie. That is perhaps because the Final Cut project file or its sequence has been deleted; or (in my case) the relevant Capture Scratch hard drive is kaput.
    For each such reference QT file, add an "x" (or something) to the file name in your media folder. (A clue about which QT files are reference movies is an unexpectedly small file size.) Changing the file names like that will result in DVD SP failing to find any trace of them them, one after the other, but this time it will continue to open the DVD SP project file until it displays a box listing the missing file names. Press "Continue" and the DVD SP project file will complete the opening process. In other words, DVD SP will refuse to open a project that needs REFERENCE movies which lack their parent sequences, but will eventually open a project with MISSING OR WRONGLY NAMED movies. You should then re-create the movies as non-reference ones, perhaps after re-creating your Final Cut project or re-capturing the shots from your camera.
    This is an important discovery for anyone who has inadvertently created reference movies and lost his/her Final Cut Project File or Capture Scratch. Without it, you will loose your DVD SP project and many earlier versions of it. So, never check the box called "Make reference movie" when creating a movie from Final cut.
    Whew!
    However, I think that it is bad programming on Apple's part to create a situation when a file has to be abandoned unecessarily like that. DVD SP should treat orphan reference movies like it treats missing movies and just complain and get on with the job of opening. It's like my car refusing to move for ever more because, just once, a door wasn't properly shut!
    I can't think why I did not keep a backup external HD for my Capture Scratch. I've got one now!

Maybe you are looking for