Can't record more than 2 minutes
Hi,
I'm trying to record from a minidisc to garageband to then convert to mp3. For some reason, garageband won't record for more than 2 minutes when I need it to record for 2 hours! Please does anyone have any ideas? I'm in a rush to get this done but can't seem to solve the problem.
Thank you in advance.
I'm about to try again, but the last couple of times I tried, the red light in the record button was no longer read, there still seemed to be something scrolling (sorry for lack of technical terms), but no information recorded. Scrolling back, I could see that the red block (recorded data) had stopped at 2 mins.
Any ideas? Thanks for your help.
Similar Messages
-
Whatapp can't record more than 10 seconds?
Why my whatapp can't record more than 10seconds on my iPhone 5s 16gb?
That would probably be a question best asked of Whatsapp support.
http://www.whatsapp.com/contact/
Regards. -
Can't record more than 71:16 of audio in any session
Thanks ahead of time for your help.
When I open a new session, arm an audio track and start recording, Logic Pro inform me that I have 71:15 left of recording space. I have more than 80gig free on my recording drive. Once I run out those 71:15 of recording, I can't record any more audio in that track. Arming the track and pressing record makes the computer try to record, but then something happens (a window flashes faster than I can read it) and the session is simply put into play at the insertion point. I have turned of the maximum recording time, and I've also tried setting it to 500 minutes.
Help please...
Macbook Pro G5 2.16 Mac OS X (10.4.9) 2 Gig ram, firefacehi
the track end marker for future reference can be found in two places:
1. scroll to the end of the arrange page (horizontally). at the top of the screen is the time ruler - you should see a small white box. on the left the numbers are in white and to the right the numbers are greyed out because that's where logic will stop recording. drag the marker to the right and the number of bars in the arrange page will increase.
2. in the transport, below the tempo display is a number - this represents the bar where logic will play upto. Cick, hold and drag up or down to increase/decrease it.
Hope that helps
Rounik -
As near as I can tell, all my software is up to date, I have the latest drivers for my audio interface, and Garageband has basically stopped working.
Firstly, whenever I start Garageband the first time, I get latency that is as much as a second or more. So I have to quit and restart Garageband every time to fix that.
If I leave Garageband running overnight, it completely forgets about my interface, and I'm forced to reboot in order to get any sound at all into Garageband. It sees my audio interface (a Tascam US-122), but I can play away and it won't get any sound at all from it until a reboot.
This means that pretty much every time I want to use Garageband I've first got to reboot the system to convince MacOSX to first listen to my Tascam. Then I've got to start Garageband, then quit and restart to get rid of the latency. This is quite a pain and I've been living with it for some time.
But now, it's gotten worse. Since upgrading everything, now I can only record a few seconds of music, before Garageband stops, creates crackling sounds and popping, and occasionally distorted versions of what I played, but stretched out and terrible sounding, and all between long gaps of dead air. This is pretty useless.
There are some people that believe there is an issue involving Garageband and Airport. And, one time I was able to record part of a track by turning off all effects and turning off my airport card. But this only worked one time.
From reading other posts, it's clear that are at least some others that are having at least some of these same problems.
So, here's what I'd like to know:
1. Has anyone had these problems and figured out a fix?
2. I'd really like to know if anyone is all caught up (10.5.2, latest Garageband, etc...) and is having no problems with Garageband?
3. If you are not having problems, what audio interface are you using?
4. I have a Tascam US-122. If you are also have this audio interface, I'd like to know if Garageband is working for you, or if you're having the same problems I'm having.
In case it's not obvious from the above questions, I'm suspecting that my problem might involve my audio interface and I'm hoping we can gather some info here to help resolve that question.
Thanks in advance for your help.So, I tried recording into Sound Studio using my TASCAM, and I got some of the same intermittent problems I was having in Garageband. Sometimes there would be a long pause and then I'd hear what I had just played but sounding like it was in slow motion and underwater. This suggested either a systemic Apple problem or a TASCAM problem. Putting my bet on TASCAM, I decided to try a new audio interface.
Anyway, after some net searching, I decided on an Edirol FA-66, so I headed on down to my local Guitar Center to buy one.
Only they don't carry them. Apparently, they stopped carrying Edirol stuff a while ago. The guy asked me what I wanted one for and I told him I was recording my guitar on Garageband. His face lighted up and he said, oh, that's easy, you've got to get an Apogee Duet. Because you're a Mac guy, you can buy one. But, I had seen the price and thought that was too much.
So, I looked all over town, and no one had an Edirol. So, I headed home and got online and started reading about the Duet. Every single person that had one raved about it. I also realized that it was only for Macintosh, so if they don't get it right, no sales. I have to say, I liked that.
So, in the end, I went back to Guitar Center and I bought one.
I've had it now for a few hours, and all my latency, pop, and noise problems have, so far, gone away.
But even better, is that the sound quality is stunningly better. At the best of times with my TASCAM US-122, my guitar sound was "thin". It never really sounded anything close to good.
This is a whole new thing. Playing through Garageband is like playing through an amp.
And, it's so nice to have all that rebooting and restarting nonsense over with.
So far, my recommendation is, if you can afford one, go for the Apogee Duet. In fairness, I haven't tried anything but the Duet and my TASCAM, but people online that have agree that the sound quality of the Duet is as good as it gets in this price range.
So, I've seen a number of other posts in which various people complained about problems that sounded similar to mine. Currently, my experience says that it may be your audio interface (or its driver). -
IMovie & iSight - can't record longer than 15 minutes?
Hi there,
I'm just curious to see if anyone can help me with the problems I'm having using iMovie and iSight. Basically, I'm trying to record a series of 2-hour lectures at my uni and am using the iSight as a firewire camera to record from into iMovie. However, every 15-20 minutes, iMovie stops recording and shows a blue screen with the message 'No Camera Attached'. I then have to start recording again, and wait another 15 minutes before the same thing occurs. This is very annoying! I have over 60 gigs of free HD space, so that shouldn't be an issue - hence, can anyone advise me what the problem might be?
BTW - I did do a search on this topic, but the only thread or relevance I could find...
Walt on line, "Making hour-long iMovie HD videos with iSight", 02:25pm Oct 20, 2005 CDT
...wasn't much help and itself pointed to a thread that has been deleted.
Is it simply a case that long movies can't be recorded in iMovie whatever the input (not just the iSight)? If so, I'd be grateful for any advice as it might save me the money spent purchasing a cheap videocam. Also, I'm aware that I can record for a seemingly unlimited time in Quicktime Pro, but the quality is not as good as with iMovie which I'd obviously prefer.
My set-up: PowerBook 15" 1.67ghz (rev.c), 80gb, 2gb RAM, Tiger 10.4.3, iMovie 5.0.2, iSight (rev.b)
Many thanks for any assistance with this!
R.We are having the same problem at my office. I have 5 iSights/5 computers all have been recording short interviews 15 minutes or less and now two of them have decided to stop one just freezes the other gets the blue screen.
I have deleted preferences, repaired permissions doesn't seem to work. Camara works fine on another computer. So it is something to do with iMovie or a preference I am not finding??
Thank you,
Angie
Hi there,
I'm just curious to see if anyone can help me with
the problems I'm having using iMovie and iSight.
Basically, I'm trying to record a series of 2-hour
lectures at my uni and am using the iSight as a
firewire camera to record from into iMovie. However,
every 15-20 minutes, iMovie stops recording and shows
a blue screen with the message 'No Camera Attached'.
I then have to start recording again, and wait
another 15 minutes before the same thing occurs. This
is very annoying! I have over 60 gigs of free HD
space, so that shouldn't be an issue - hence, can
anyone advise me what the problem might be?
BTW - I did do a search on this topic, but the only
thread or relevance I could find...
Walt on line,
"Making hour-long iMovie HD videos with iSight",
02:25pm Oct 20, 2005 CDT
...wasn't much help and itself pointed to a thread
that has been deleted.
Is it simply a case that long movies can't be
recorded in iMovie whatever the input (not just the
iSight)? If so, I'd be grateful for any advice as it
might save me the money spent purchasing a cheap
videocam. Also, I'm aware that I can record for a
seemingly unlimited time in Quicktime Pro, but the
quality is not as good as with iMovie which I'd
obviously prefer.
My set-up: PowerBook 15" 1.67ghz (rev.c), 80gb, 2gb
RAM, Tiger 10.4.3, iMovie 5.0.2, iSight (rev.b)
Many thanks for any assistance with this!
R. -
Can not upload more than 15 minutes to youTube
My YouTube account allows me to upload a movie longer than 15 minutes, but iMovie 11 will not allow me to go beyond 15 minutes. I have to export the movie to my hard drive then upload it to youTube from my hard drive. Is there a way to get around this seemingly iMovie default?
I think I can speak for most here when I say it's usually better to Export to HD, then upload to YT. Most everyone has had issues w/ iMovie's YT Upload function. I just don't bother w/ it anymore. I have the same "greater than 15 min." approval on YT and recently uploaded a 40 minute vid. w/ no problem.
-
I can't seem to get GarageBand to recognize my Behringer X1222 USB Mixer. It will record, but only on the generic "USB Input, without seeing or letting me select the input channel from the mixer. Can't find any drivers from Behringer. How do I getGB to "see" the mixer? Thanks, I'm a newbie to Macs in genreal, and recording...
viiram wrote:
It will record, but only on the generic "USB Input, without seeing or letting me select the input channel from the mixer.
the x1222 includes a 2 channel audio interface, 2 channels are all you can get from it.
the most you can do is record to 2 tracks at a time; skim this tute to see how:
http://www.bulletsandbones.com/GB/Tutorials.html#allaboutrecording2tracks
(Let the page FULLY load. The link to your answer is at the top of your screen) -
Can't record more than 5 tracks, why?
i Have 5 tracks and I'm trying to record on a sixth one but when I hit record it ends up recording over a previous track. Why?
hi
the track end marker for future reference can be found in two places:
1. scroll to the end of the arrange page (horizontally). at the top of the screen is the time ruler - you should see a small white box. on the left the numbers are in white and to the right the numbers are greyed out because that's where logic will stop recording. drag the marker to the right and the number of bars in the arrange page will increase.
2. in the transport, below the tempo display is a number - this represents the bar where logic will play upto. Cick, hold and drag up or down to increase/decrease it.
Hope that helps
Rounik -
Can't Capture more than 10 minutes or so before the window freezes
Using Final Cut Express 2
Camera feeding is a Hi-8 Sony DCR-TRV120 NTSC (non Hi Def)
Troubles started (I think) after I upgraded my OS System to 10.5.6
I hadn't used this program in a while.
Things seem to go as they used to when I was capturing video, but after 10 minutes or so (this part is not consistant), the capture window freezes with no message while the source video on the camera plays on.
I have tried changing my cable
I have tried using a different camera, my friend's Hi-8 Sony DCR-TRV140 NTSC (basically a better version of my camera)
I tried trashing the entire program and all related files and doing a complete re-install, but this didn't solve the problem.
Any advice?Are you by any chance using an external Hard Drive that is not formatted with Mac OS Extended ?
With regard to re-installing etc. have you checked out this article:-
http://support.apple.com/kb/TA24195?viewlocale=enUS&locale=enUS
Message was edited by: Ian R. Brown -
Monitor any record to stay in queue for more than 5 minutes under AQ ADMIN schema
Hi All,
We need to prepare script which monitor/notify us the record which stays in queue for more than 5 minutes under AQADMIN queue tables. Can someone throw light on this?
Regards,
MDHi Asif,
We need script to monitor if we have "waiting" status in msg_state column of the below table is waiting for more than 5 minutes.
SQL> desc AQ$TBL;
Name Null? Type
QUEUE VARCHAR2(30)
MSG_ID NOT NULL RAW(16)
CORR_ID VARCHAR2(128)
MSG_PRIORITY NUMBER
MSG_STATE VARCHAR2(16)
DELAY DATE
DELAY_TIMESTAMP TIMESTAMP(6)
EXPIRATION NUMBER
ENQ_TIME DATE
ENQ_TIMESTAMP TIMESTAMP(6)
ENQ_USER_ID VARCHAR2(30)
ENQ_TXN_ID VARCHAR2(30)
DEQ_TIME DATE
DEQ_TIMESTAMP TIMESTAMP(9)
DEQ_USER_ID VARCHAR2(30)
DEQ_TXN_ID VARCHAR2(30)
RETRY_COUNT NUMBER
EXCEPTION_QUEUE_OWNER VARCHAR2(30)
EXCEPTION_QUEUE VARCHAR2(30)
USER_DATA TEST1
PROPAGATED_MSGID RAW(16)
SENDER_NAME VARCHAR2(30)
SENDER_ADDRESS VARCHAR2(1024)
SENDER_PROTOCOL NUMBER
ORIGINAL_MSGID RAW(16)
ORIGINAL_QUEUE_NAME VARCHAR2(30)
ORIGINAL_QUEUE_OWNER VARCHAR2(30)
EXPIRATION_REASON VARCHAR2(31)
CONSUMER_NAME VARCHAR2(30)
ADDRESS VARCHAR2(1024)
PROTOCOL NUMBER
Regards,
MD -
When recording a Video demo slide in Captivate 8, pressing the [END] key takes more than a minute to stop the recording. Why is there such a lag? Additionally, the software I record experiences terrible lag times. For instance, It may take 15 seconds to display a 2-digit number I typed into a blank field. the same software has no lag issues when I'm not recording it.
Yes and no. The CPTX file is on my PC. Our software that I'm making the demo of is on the network. but I'm not the "IT Guy" so I can't provide specifics; however, I work at a computer software company and we probably have more servers than employees. The network hardware is kept current. I've been making similar tutorials for 10 years and haven't run into this issue until switching to the subscription Captivate.
-
My iPhone 4 with iOS 6 is making me start to hate Apple. Any App and at any time I open and I can not view it or move for more than 2 minutes, they close themselves. During connections, it also gives this problem and the signal disappears after a few seconds back but often the person on the other end has hung up ... I can not stand it anymore, someone suggests something?
Besides these problems, there is the battery, which was bad got worse, she is not lasting more than 10 hours, even without using the phone.
Sometimes it even seems that the problem was solved, but my joy did not last long after I celebrate all the problems return, is incredible ...
thanks.
Sorry my bad Inglês.Try a reset hold home/sleep buttons until Apple logo appears
If that does not improve try a restore
http://support.apple.com/kb/HT4137
For your information
We are NOT Apple here we are all users helping other users
so emotion is ignored -
Okay, so I just updated to the newest iOS 6 version on my iPod. And now I can't be in an app for more than 5 minutes without the app closing and I can't get back into the app for at least 10 minutes. Somebody, anybody please help me! This is getting really annoying!!! Please please please!
See:
iOS: Troubleshooting applications purchased from the App Store
Contact the developer/go to their support site if only one app.
Restore from backup. See:
iOS: How to back up
Restore to factory settings/new iPod -
i am having the problem in my 3gs iphone. it says it shouldnt take more than 3 minutes then i get this message Could not activate iphone.
i have taken the sim card out and put it back in even then its of no use.
if any one out there can help us it would be very nice of them. thank you for your time.I can not get to iPhone screen, so no way to get to Settings. That is the problem. When I connect phone to iTunes I get screen asking to insert SIN card. On the phone I'm getting Cinfigure screen asking Launguage , Country or Region, Wi-Fi, ( I can connect to my home wi-fi), and last screen "Activating your iPhone". After two minutes of waiting IM getting message: Your iPhone could not be activated because the activation server in temporary unavailable. try connecting to iTunes or try later or contat apple.com/support.
Like I mention, I went to Bell as well Rogers store and tried to insert active SIM card with no results.
Yes, my friend unlock the phone to use with Rogers but I don't know where -
Can you make a movie for more than 2 minutes on an ipad and save it on a flash drive
Can you make a movie for more than two minutes on the ipad and sve it on a flash drive using windows XP
Using Apple's camera connection kit, you can use a flash drive to IMPORT photos and videos. However, you can't EXPORT any type of file to the flash drive.
Cheers, Tom
Maybe you are looking for
-
GBs don't match up! PLEASE HELP!
I've been slowly filling up my 6 GB iPod mini since my purchase last May. Currently, my iTunes Library shows "994 songs, 3.61 GB". But when I tried to add the latest batch of 16 songs, it showed my capacity was 5.67 GB and could not update any more.
-
How to Force Landscape View with EAGLView
I thought the crash lander app was a perfect template for me. Everything is working great except now I realize my game will really work better in landscape mode than portrait. I can't get it to work no matter what I try I've read through the many pos
-
GNOME3 fails to raise windows.
This problem popped up some time last night, when I click on a background window I can interact with it normally but the window will not raise. I have it set to raise the window automatically in gnome-tweak-tool. For some reason the terminal seems to
-
MP3 files fail to play in MuV0 N
Dear Friends, Three days passed from the time I have purchased this type of player Unfortunately the file with the extention of MP3 does not play, but I can use the radio and WMA files, what's the matter?please help me.
-
Firefox has stopped working.
Firefox recently crashed (because I had another program doing too much stuff). After restarting my computer I opened up Firefox and tried loading the tabs I had opened and it didn't work. It just kept loading but never loaded. I tried again to open f