Can't record or set reminder on 037 Quest

I can Watch Quest but I can't record anything or set reminders. Quest+1 and all other channels ok as far as I can see. When I press Record or try to set a reminder literally nothing happens. Change channel and its fine.
17.10.0
2.4.0
910
92
DTRT2100
Tried a restart and a rescan. Nothing changed.
Solved!
Go to Solution.

I did raise an issue with Youview --
https://community.youview.com/youview/topics/youview-epg-fault-quest
I'm fairly certain that the root cause is incorrect EPG data for this channel but the Youview box appears to rely a lot on accurate EPG data so when its wrong the impact on Youview users appears more significant than other platforms.

Similar Messages

"Set Reminder" inoperative after DVR recording

Hello All, I set the DVR via the website to record a movie. It worked fine, after stopping movie, and saving it for later, I exited the DVR menus. When I try to use the "Set Reminder" function in the TV Listings, a dialog box pops up asking me if I want to "record show, upcoming shows, exit". I rebooted the STB w/no results. This is happening on the DVR STB box itself, not on one of the either two HD STB's I have. I searched the Forums and Help extensively, and found null. I have yet to try any of the other STBs, and have not rebooted the router either. Ideas? Thanks In Advance, RJMac

DVRs do not have reminders - only the option to record. There are several threads here about his issue and it's possible Verizon will add this feature in some future update, but it has not been promised as a feature.
Message Edited by Keyboards on 08-02-2009 08:43 PM
If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer as Accepted Solution so others can see the solution to the problem.

Can we record a video from a web cam and let saved video take our previous setting

Can we record a video from a web cam and let saved video take
our previous setting
fps: 20
bitrate: 1000
Size: 500*400
can we configure that in code or is it a webcam specs?

Hi, Vikas-
After a brief bit of research, you're definitely hitting upon the limitation of the browsers. Not all of the browsers have implemented this part of the HTML5 standard, so you're going to either have to use Flash or be limited to these specific browsers.
Thanks,
-Elaine

I'm getting a very low signal from my Blackbird interface. The fire wire connection is selected properly and track recording sliders set. However the recording level slider in the lower right corner is grayed out. How can I get better signal?

I'm getting a very low signal from my Blackbird interface. The fire wire connection is selected properly and track recording sliders set. However the recording level slider in the lower right corner is grayed out. How can I get better signal?

If it's slow on startup it would be extensions loading or LaunchDaemons starting up.
You should have a look in:
/Library/LaunchDaemons
/Library/Extensions
You can count out anything in your home folder and it shouldn't put anything in /System as that's reserved for Apple.

Regarding receiving texts as emails: Can you apply this setting to one individual? I want to continue to receive texts from everyone else except one person!

Regarding receiving texts as emails: Can you apply this setting to one individual? I want to continue to receive texts from everyone else except one person!

Don't want to block the person, just have all his texts going directly to my email so that I can maintain a continuous record of his text contacts (rather than remain in text form).
It appears that I must select an option that makes ALL texts go to email, which I'd prefer not doing.

How can I permanently prevent the Reminder Fox icon (in the Add-on Bar) and the Add-on Bar from showing?

Installed: Firefox 27. ReminderFox 2.1.4. Windows XP Professional
Since ReminderFox 2.1.4 was installed, I have deselected the 'Status/Add-on Bar Display 'Bow' and text on status bar' numerous times, but the setting never takes effect even after pressing the Apply and OK buttons.
The Add-on Bar, which has always been deselected from the View > Toolbars menu, shows as selected in the menu, and even though I deselect it manually, when I close Firefox and then reopen it, it shows again as selected in the menu.
How can I permanently prevent the Reminder Fox icon (in the Add-on Bar) and the Add-on Bar from showing?

It is possible to uninstall the add on or to customize the add on toolbar from the Toolbar Customize option. To troubleshoot this try this article [[How to fix preferences that won't save]]

Can't record with Sound Blaster Live Va

I have a Sound Blaster Li've Value (on-board) card and can't record streaming audio with it. It plays streaming audio fine, and seems to record it, but the resulting wav or mp3 files are "empty", playing them results in silence. I noticed that there was an old thread about this, but I couldn't find a reply. I tried to find out if this sound chip was indeed full duplex, but couldn't find that information. Any help would be greatly appreciated.
Cheers,
Ron

I have the same message error.
"The SBPCI Interrupt has been routed incorrectly by the system. AudioPCI Inacti've. Use Automatic setting in the Device Manager."
I have a Compaq computer and win 98. Ever since we moved, the speakers stopped working.
I tried going thru system properties and Device manager...it shows that the device is working properly. And the Automatic setting box was already checked. I bought new speakers thinking the speakers were bad but I still get no sound. I followed all the steps for Sound Troubleshooting. I did notice when I went to control panel, multimedia, devices, audio...one of the sound cards said: driver is enabled but inacti've due to an unknown problem. But it didn't tell me how to fix the problem?
I don't know how to get the sound.
Can someone help me? I really don't know anything about the computers.
Thanks in advance.

Set reminder on 7100-P2?

I'd like to know if the Motorola 7100-P2 HD Set-Top Box has a "set reminder" feature similar to the that on the SD box's. Does it have set reminder at all? If so, does it change to that channel on it's own if you don't respond? We occasionally use this feature to record something on a VCR if we're already recording 2 shows, and would like to upgrade the box in that room to HD but want to make sure it has this feature first.
Thanks for any replys!

esr,
The 2500(s), 6200(s) and 7100(s) should have the reminder function.... as this is a IMG function and not specific to the box. The only exception would be a DVR as its IMG is slightly different due to recording options.
Let me know if you have any other questions or run into an issue, I would be glad to look into it.
Tom_VZ
Verizon Support
Notice: Content posted by Verizon employees is meant to be informational and does not supercede or change the Verizon Forums User Guidelines or Terms or Service, or your Customer Agreement Terms and Conditions or Plan.

How many steps can be recorded in the History panel?

In Photoshop, 20 steps can be recorded in the Histroy panel with the defult setting, and we can change the setting to record more or less steps by choosing "Edit> Preference".
In Lightroom, how many steps can be recorded in the History panel with the defult setting? And how can we change the number of step to be recorded?

I guess since the history is kept in the database (and not only in memory as with PS), there is not so much an issue in limiting them.
Beat Gossweiler
Switzerland

Can't recording Midi and Audio at the same time

I'm in GREAT need of help. I can't record midi and audio at the same time. I'm using an M AUDIO project mix I/O. I know this is VERY basic stuff but I can't seem to get it to work.I can record multiple audio at once. ANd I can record midi but not at the same time. PLEASE help . Is there a setting somewhere I need to change ? Thanks
Tracy

Hi!
Enable all audio tracks (R) you wish to record. Then make sure you select the audio instrument you are using on the left of the arrange page (track list). If you here your input, hold shift, then highlight (gray) the mentioned audio tracks you wish to record on. When R is red, and the proper tracks are grey, you can record. Hope that made sense!

Can i record with more than one audio interface

I need to record 16 tracks, I have two different audio iterface, in GarageBand i can only find one of them, if i go to prefrenses-audio, I can set any of them as my audio interface, but only one at the time.
Any tips to how I can use bouth simultanious? Cubase, Logic mabye, GarageBand no can do? :-)

josteinfromoslo wrote:
can i record with more than one audio interface
yes, create an aggregate device:
http://www.bulletsandbones.com/GB/Tutorials.html#allaboutaggregatedevices
(Let the page FULLY load. The link to your answer is at the top of your screen)
josteinfromoslo wrote:
I need to record 16 tracks
GB can only record 8 tracks at a time, however that is 16 channels, so with some extra effort you can get the outcome you desire, see the second tip here:
http://www.bulletsandbones.com/GB/TricksHacks.html

Could not set reminder on my iphone, edit option is not coming

could not set reminder on my iphone, edit option is not coming

I have the same issue. I don't have, or have never had any Exchange account on the ipad. A simple yahoo email accout is the only one on it. I have turned off all restrictions, and restarted several times. Have yet to reset or restore, would just like to get rid of the passcode, but I can't......Thanks for any advice.

Can't record more than 71:16 of audio in any session

Thanks ahead of time for your help.
When I open a new session, arm an audio track and start recording, Logic Pro inform me that I have 71:15 left of recording space. I have more than 80gig free on my recording drive. Once I run out those 71:15 of recording, I can't record any more audio in that track. Arming the track and pressing record makes the computer try to record, but then something happens (a window flashes faster than I can read it) and the session is simply put into play at the insertion point. I have turned of the maximum recording time, and I've also tried setting it to 500 minutes.
Help please...
Macbook Pro G5 2.16 Mac OS X (10.4.9) 2 Gig ram, fireface

hi
the track end marker for future reference can be found in two places:
1. scroll to the end of the arrange page (horizontally). at the top of the screen is the time ruler - you should see a small white box. on the left the numbers are in white and to the right the numbers are greyed out because that's where logic will stop recording. drag the marker to the right and the number of bars in the arrange page will increase.
2. in the transport, below the tempo display is a number - this represents the bar where logic will play upto. Cick, hold and drag up or down to increase/decrease it.
Hope that helps
Rounik

Can you record audio in mainstage?

Can you record audio in mainstage?

Yes. There's a toolbar button and there's an item in the Action menu. It will record the audio that coming out of the output pair you set in the Audio tab in the preferences. You can set a recording path and a file type in the prefs too.

Can we record the facetime call or watch the facetime call in future?

can we record the facetime? or watch the facetime call again in future?

As far as I know, not from within the app. The only way I can think of is the low tech way of setting a voice recorder by the iPad while the call is going on.

Can't record or set reminder on 037 Quest

Similar Messages

Maybe you are looking for