Can't record when box is in standby mode and other...

Once my youview box has been put into standby it will not turn on with just one press of the remote but if I press the button 10 to 15 times it will usually come on after 4 to 5 minutes. during this time, the remote will not switch my Sony Bravia tv on but it will shortly after the youview box comes on. To compound the frustrations, I will usually get an IPC6023 message on the tv screen telling me that the channel I'm tuned to is unavailable but the channel is patently available because once I have pressed the ok button three times the channel plays with perfect picture and sound. 
Also any recordings scheduled whilst the box is in standby mode either fail or just do not record. I presume this is because of the IPC6023 problem.
One other thing. I am at the moment watching the tv but the youview box is showing the mauve standby light rather than the blue lights which should indicate it is on and also the recording light is on despite the fact that it is not currently recording any programmes, I presume the recording light is on because the box thinks it is still trying to record a failed programme which was set to record whilst the box was in standby mode.
I have checked my broadband and cables and they do not seem to be the problem
BT has supplied me with  a 2nd Youview DTRT2100 box and this has exactly the same problems. I changed the hdmi cables and the Ethernet cables after finding this same problem occurred on the 2nd box but there is no difference.
I have now had 3 Cube engineers visit to check my problem but all they do is a factory reset, deleting any recordings that I have managed to make while the box is not in standby mode and then leaving with the problem unsolved, Now that I’ve received a replacement box which has exactly the same problems, I do not want to go through the whole rigmarole again

Hi Colin6443,
Welcome and thanks for posting!
Sorry for the problems you're having with your Youview box and that it's going on for so long.
Send over your details and we'll help get things sorted from here.  Click on my username and under the "about me" section of my profile you'll see the link to get in touch with us.
All the best,
Robbie
BTCare Community Mod
If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
We are sorry that we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

Similar Messages

  • 7.3.2.6 crashes when coming out of standby mode

    Has anyone else seen this problem with iTunes 7.3.2.6?
    It crashes when coming out of standby mode. There is an error report I can send to Microsoft, but since it's an Apple program, I never send it.
    Using standby was OK with iTunes 7.2.

    Okay. Let's try getting a fresh one through to Roy.
    If the log has been "live" for a while, info about every crash of any description will have been being added to it (with my Morrowind crashing on a daily basis, i once found a DrWatson log on belladonna that was over a GB in size). So it'll be easier for him to work through a log with just one crash on it.
    Will run through my standard instructions just so i don't forget anything. (Sorry, I know you're up to speed on this sort of thing, no offense meant.)
    Typically, you'll need to configure Dr. Watson on your PC in order to generate crash logs. Windows start menu -> Run. Type in "cmd". Hit return. At the prompt in the command line window that comes up, type in
    drwtsn32 -i
    And hit return.
    This will create crash logs in Documents And Settings\All Users\Application Data\Microsoft\Dr Watson\. There'll usually be a file in here called "drwtsn32.log"
    prior to collecting the itunes crash log, delete any existing crash logs in there. (we want to make sure we send the correct crash log.)
    Generate the crash, collect the crash log, and send it as an attachment to this email address: [email protected]
    In the email to Roy, be sure to include the following information:
    - A link to the thread on Apple Discussions where the issue is being discussed
    - The username you are using in the thread
    - The version of iTunes you are using or trying to use
    - the version of Windows you are using (mention service packs)
    - A concise description of the issue you are seeing
    - The exact text of the error message you are seeing

  • How can I check when my Apple Care runs out and how old my macbook is?

    Thinking of selling my macbook and going for a macbook pro but I need to find out some more details about it first!
    so, How can I check when my Apple Care runs out and how old my macbook is?

    Enter your serial number here https://selfsolve.apple.com/agreementWarrantyDynamic.do

  • Illustrator keeps quitting-notice others have had similar issues, not resolved-so what it the reason for "sending a report" to Adobe if nothing can be done with it????? paying for a product that I can't use when I need to use it and no help-come on-someon

    Illustrator keeps quitting…notice others have had similar issues…so what it the reason for "sending a report" to Adobe if nothing can be done with it????? paying for a product that I can't use when I need to use it and no help…come on…someone has to have an answer…HELP Pleeeeease

    <moved from Adobe Creative Cloud to Illustrator>
    reset your preferences -
    acrobat:  http://help.adobe.com/en_US/acrobat/X/pro/using/WS58a04a822e3e50102bd615109794195ff-7feb.w .html
    adobe media encoder: https://forums.adobe.com/thread/1713540
    after effects:  http://helpx.adobe.com/after-effects/using/preferences.html
    dreamweaver:  https://helpx.adobe.com/dreamweaver/kb/restore-preferences-dreamweaver-cs6-cc.html
    flash:  http://helpx.adobe.com/flash/kb/re-create-preferences-flash-professional.html
    illustrator:  http://helpx.adobe.com/illustrator/using/setting-preferences.html
    indesign:  https://forums.adobe.com/thread/526990
    lightroom: https://helpx.adobe.com/lightroom/help/setting-preferences-lightroom.html
    muse (mac): https://forums.adobe.com/thread/1246022?tstart=0
    photoshop:  https://forums.adobe.com/thread/375776
    photoshop elements:  https://helpx.adobe.com/photoshop-elements/kb/preference-file-locations-photoshop-elements .html,  http://www.photokaboom.com/photography/learn/Photoshop_Elements/troubleshooting/1_delete_p references_file.htm
    premiere elements:  https://helpx.adobe.com/photoshop-elements/kb/preference-file-locations-photoshop-elements .html
    premiere pro: http://www.mediacollege.com/adobe/premiere/pro/troubleshooter/trash-preferences.html
    if that fails, uninstall, clean (http://www.adobe.com/support/contact/cscleanertool.html) and reinstall

  • Can we record a video from a web cam and let saved video take our previous setting

    Can we record a video from a web cam and let saved video take
    our previous setting
    fps: 20
    bitrate: 1000
    Size: 500*400
    can we configure that in code or is it a webcam specs?

    Hi, Vikas-
    After a brief bit of research, you're definitely hitting upon the limitation of the browsers.  Not all of the browsers have implemented this part of the HTML5 standard, so you're going to either have to use Flash or be limited to these specific browsers.
    Thanks,
    -Elaine

  • How we can restrict record in CTL file on the basis of other table ?

    Hello all,
    How we can restrict record in CTL file on the basis of other table ?
    Eg.
    I have following control file to load the records in the table through the sql loader.
    LOAD DATA
    INTO TABLE THIST APPEND
    FIELDS TERMINATED BY "|" TRAILING NULLCOLS
    LNUM POSITION(1) Char "substr(:LOAN_NUM, 4, 13)",
    TSRNUM Char "rtrim:TRAN_SR_NUM)" ,
    TPROCDT Char "to_char(to_date rtrim:TRAN_PROC_DT), 'MMDDYYYY'), 'YYYYMMDD')"      
    I have another table c all TFILE in which I have LNUM. I want to import only those records from input text file using the control file and sql loader in which LNUM is exist in the TFILE.
    So how i can restrict it in the Control File.
    Thanks
    Kamlesh Gujarathi
    [email protected]

    Hello Satyaki De.
    Thank you very much for your suggestion but my Private information is totally apart from this question & I already I have changed each and every information from the question.
    Thanks
    Kamlesh Gujarathi
    [email protected]

  • What can you do when you forget your iPod password and it locks you out?

    What can you do when you forget your iPod passcode and it locks you out.

    http://manuals.info.apple.com/en_US/iPod_touch_iOS4_User_Guide.pdf

  • Can i see when my phone was last accesed and used and restored.

    can i see when my phone was last accesed and used and restored.

    If you are the account owner you can log in to verizonwireless.com and check the call and text logs to see when the last activity was.  As far as seeing when it was last "restored" - that could mean several things.  Is it a smartphone?  Do you mean a factory reset? Restore from a backup?
    Is the phone not in your possession?

  • (ios5 ipad bugs)I can't get changes of album art, artist, album and other tags to show up in the iPad music player, but they show up correctly in the iTunes device view. Certain random songs do not sync correctly.   Wifi sync hasn't worked yet.

    (ios5 ipad bugs)I can't get changes of album art, artist, album and other tags to show up in the iPad music player, but they show up correctly in the iTunes device view. Certain random songs do not sync correctly.   Wifi sync hasn't worked yet.
    I mostly use technology for education and professional audiovisuals and lights.
    I don't sync  music because I use music from at least 4 different computers. (manually mange music)
    I use my iPad to play performance tracks for church and a local gospel group out of our church, Won4Christ.
    I chose to buy the iPad because the laptop of one of the group members (dellxps running iTunes) was randomly losing and mixing up music and I wanted a more stable option that was bigger than my iPod touch.
    I tried to add some data to music libraries that I previously added to my iPad, but the data only shows up when looking at the device in iTunes.
    Wifi sync has not worked on either my laptop or desktop ( both running windows 7 enterprise 64 and newest iTunes) not really a big issue, but very annoying
    When browsing through library playlist albums on the iPad, random artwork shows up on playlists with no artwork that you touch while dragging, and it does not go away until you change to another navigation tab and back.
    Random songs out of hundreds that I added showed up in iTunes grayed out with a sync circle beside them.  Those songs would play back okay on the iPad but were unplayable through the iTunes device view.  I had to delete the songs manually through the library along with the playlist and add them again. 
    These seem to be major stability bugs in the "new" music app and iTunes.  My only option right now seems to be to delete the songs that I want to change and re-add them with the changes already applied rather than changing the id3 tags and artwork on the existing music. I hope apple will release updates to resolve these issues. 
    Thank you for actually making it to the end of this manuscript of annoyances.

    Just wondered if anyone had any other suggestions.

  • HT1923 I get a message-error opening installationlog file. Verify that the specified lof file location exists and is writeable-when I try to uninstall iTunes and other components

    I get a message-error opening installationlog file. Verify that the specified lof file location exists and is writeable-when I try to uninstall iTunes and other components. How can I uninstall and reinstall iTunes?

    Hey jemerritt,
    Thanks for the question. I understand you are experiencing issues with iTunes for Windows. The following resources may help to resolve your issue:
    iTunes 11.1.4 for Windows: Unable to install or open
    http://support.apple.com/kb/TS5376
    Issues installing iTunes or QuickTime for Windows
    http://support.apple.com/kb/HT1926
    Thanks,
    Matt M.

  • Why is the new Safari (7) not letting sound be heard from Soundcloud widgets (players) on my website when the earlier Safari worked fine, and other browsers also work fine?

    Why is the new Safari (7) not letting sound be heard from Soundcloud widgets (players) on my website when the earlier Safari worked fine, and other browsers also work fine?

    Might be an incompatible extension or plugin ...
    Try troubleshooting Safari extensions and third party plugins.
    From the Safari menu bar click Safari > Preferences then select the Extensions tab. Turn that OFF, quit and relaunch Safari to test. If that helped, turn one extension on then quit and relaunch Safari to test until you find the incompatible extension then click uninstall.
    If it's not an extensions issue, try troubleshooting third party plug-ins.
    Back to Safari > Preferences. This time select the Security tab. Deselect:  Allow all other plug-ins. Quit and relaunch Safari to test.
    If that made a difference, instructions for troubleshooting plugins here.

  • How can I get my iPhone out of landscape mode and back to portrait?

    How can I get my iPhone out of landscape mode and back to portrait? Tilting the phone doesn't work.

    Try following - 1 by 1:-
    * make sure portrait lock is not on & try turning on/off several times
    * turn off mobile and turned it back on
    * hard reset by pressing lock and home at same time
    If problem persist, you need to try following but be careful since the following impact your iphone.
    * resetting all setting: this will reset all settings of your iphone back to factory setting
    * resetting all setting by erasing all data: this will reset all setting and erase all data so do back-up and proper syncing and read relevant details
    * restoring from itunes: this will also erase all data and take mobile back to day 1
    last 3 options are last resort and only be done if you are sure you can restore your data.
    Please don't hold me responsible for any data loss while doing last 3 options
    Cheers!

  • My iPhone turns off whenever it goes into standby mode and has to be turned back on to work

    My iPhone turns off whenever it goes into standby mode and has to be turned back on to work

    That's normal behavior. It turns off automatically in order to preserve the battery. Pushing the On/Off button turns it on immediately. This also requires entering the passcode and prevents the phone from being accessed by anyone but you.

  • Ever since I got the new update 5.1 my iPod's been dying faster. It used to last for at least 3 hours, now it won't even last one hour and dies for no reason(even when it's in sleep mode, and not in use) What's wrong with it? Is it the update? lagging too

    Ever since I got the new update 5.1 my iPod's been dying faster, even after I charge it. It used to last for at least 3 hours, now it won't even last one hour and dies for no reason (even when it's in sleep mode, and not in use) What's wrong with it? Is it the update? It's lagging as well..

    Some Users have Reported that a  Restore as New  has helped Resolve issues...
    Backup and Set Up as New Device
    http://support.apple.com/kb/HT4137

  • I forgot the code for my iPhone to access the Home screen I do , please help me try formatting the iphone but when I put in nfc mode and connect it to the pc recognizes it and everything when you try to format the error 3004 appears

    I forgot the code for my iPhone to access the Home screen I do , please help me
    try formatting the iphone but when I put in nfc mode and connect it to the pc recognizes it and everything when you try to format the error 3004 appears

    Hello polo-angulo,
    I apologize, I'm a bit unclear on the nature and scope of the issue you are describing. If you are saying that you are getting an error code (3004) when you try to restore your iPhone (because you could not remember your passcode), you may find the information and troubleshooting steps outlined in the following articles helpful:
    Resolve iOS update and restore errors in iTunes - Apple Support
    Get help with iOS update and restore errors - Apple Support
    Sincerely,
    - Brenden

Maybe you are looking for