Can't Record with Audigy 4 Pro - Please He

I've done several searches and read posts until my eyes crossed and haven't found the solution yet so here goes... I've had the Audigy 4 pro card for over a year and tried a couple of times to record but couldn't so I would just go away thinking I would figure it out later... Later is?today. I'm trying to record some of my vinyl (records) onto my computer in 24/96. I have a turntable with a pre-amp connected to the outboard Audigy box into the Line-3 RCA inputs. I can play my albums through the system with no problems at all. Good sound, plenty of volume (same as any other source). I set the recording source in the mixer?as Line-3 and "What you hear", when I go to the Media Source Player to record, the correct source shows up. I hit record, save the file,?and I get no?audio on the resulting file. I tried other output formats (mp3, etc) and still no audio on the resulting file. The monitor bars are checked on the Media Source player and they show no activity during recording. I also tried to record off a CD with the same results. Once again, the system plays fine it just won't record. Thanks for any and all help!

Thanks for the response!?I can't get anything (CD, Wave, Mic, Line) to record at any of the settings (MP3, WMA, 44.-6), The Audigy is set as the Default Recording Device. The mixer is set up with the correct (and unmuted) source on the record slider. I've not tried Wavelab light, is it part of the Creative bundle or do I need to pull it off the install CD??Thanks again for the help.

Similar Messages

  • Audio recording with QT Pro vs. QT Broadcaster

    Need to record a seminar (audio only) and live webcast parts of it. Audio goes from mixer to line in on Macbook with QT Pro and QT Broadcaster. Broadcaster will record to disk, but it appears to have no metering. It also appears that to record with Broadcaster, you have to be broadcasting. I successfully recorded with QT Pro while broadcasting. Questions:
    1) With QT Pro, how far into the red is safe on recording?
    2) Are there any input metering options (like displaying the peaks for a second or two)?
    3) Can you change the default naming from Audio n.mov to something else?
    4) With QT Broadcaster, is there any level indication - how can you tell if your level is good?
    5) It seems simplest to record with QT Pro and just turn on Broadcaster when needed. QT Pro won't let you pause a recording and resume with the same file, but I can live with that. But is there a better way to do this?
    Thanks,
    John

    OK, that is really true...
    While I was waiting for a reply, I tried what David suggested and used my video Hi8 to simulate a transfer with no sound except the one from my tapes....and guess what ????
    it works !
    I am going to try it again with STP and QT7 under same conditions.
    Funny that these boxes seem to need a video running.
    Even more than that, I have tried an empty tape...and it does not seem to work !
    Which means you really need an active signal
    thanks a lot for this reply which is very helpful
    Ivan

  • I have a ipod classic 80Gb version 1.1.1 pc , but I can't sync with iTunes . Please give a solution.

    Dear sir,
                    I have a ipod classic 80Gb version 1.1.1 pc , but I can't sync with iTunes . Please give a solution
    Yours faithfully
    Vineesh

    Hello Vineesh
    Try out the troubleshooting assisting below to get your iPod Classic to start syncing again properly.
    iPod classic Troubleshooting Assistant
    https://www.apple.com/support/ipod/five_rs/classic/
    Regards,
    -Norm G.

  • IPhone 4s not being recognized and cannot be activated for service--what does this mean? I can't sync with iTunes. Please help

    iPhone not being recognized and cannot be activated for service--what does this mean? I can't sync with iTunes. Please help.
    When I connect iPhone to USB iTunes is giving me the above message. Please advise if you know the fix.
    Thanks,
    Lina1116

    did you find a fix?

  • I am recording with Logic Pro X, using my Yamaha XS8 keyboard as a Midi controller. I also have a Thunderbolt Display. Every time I play and release a note on the keyboard, the Thunderbolt Display speaker emits a doink sound. How do I get it to stop?

    I am recording with Logic Pro X, using my Yamaha XS8 keyboard as a Midi controller. I also have a Thunderbolt Display. Every time I play and release a note on the keyboard, the Thunderbolt Display speaker emits a doink sound. What is causing it and how do I get it to stop? My sound is running through the Saffire Pro 40 Interface (Focusrite) into external speakers with powered amps.
    Also, When I record I am hearing little pops in the system. I have checked all of my meters and they are not clipping. What is causing it and how do I get it to stop?
    Ken

    MUYconfundido wrote:
    Pancenter,
    Thanks for the response, but I do not have a midi interface. I am using a midi to usb connector cable, thus bypassing the need for a Midi interface.
    The Mac reads the USB cable as a midi device, but not the keyboard that I am trying to use as a controller. I have tried it with my korg sp 300 and with my Nord Electro 2.
    Thoughts?
    Thanks,
    Tristan
    Tristan...
    This is what you have, correct?
    http://www.alesis.com/usbmidicable
    This from Alesis..
    "The AudioLink Series USB cable receives and outputs MIDI signal thanks to its internal interface. The USB-MIDI Cable connects plug-and-play to your Mac or PC for an all-in-one USB-MIDI solution."
    Notice, -internal interface-. What you have is a simple USB MIDI Interface. Most MIDI interfaces are USB.
    My point is (was), MIDI OUT of the Korg goes to the connector marked MIDI IN on the Alesis, those new to MIDI often get this wrong.
    pancenter-

  • Can i record with more than one audio interface

    I need to record 16 tracks, I have two different audio iterface, in GarageBand i can only find one of them, if i go to prefrenses-audio, I can set any of them as my audio interface, but only one at the time.
    Any tips to how I can use bouth simultanious? Cubase, Logic mabye, GarageBand no can do? :-)

    josteinfromoslo wrote:
     can i record with more than one audio interface
    yes, create an aggregate device:
    http://www.bulletsandbones.com/GB/Tutorials.html#allaboutaggregatedevices
    (Let the page FULLY load. The link to your answer is at the top of your screen)
    josteinfromoslo wrote:
    I need to record 16 tracks
    GB can only record 8 tracks at a time, however that is 16 channels, so with some extra effort you can get the outcome you desire, see the second tip here:
    http://www.bulletsandbones.com/GB/TricksHacks.html

  • Where can I download Color Finesse and how I can install them with Premier Pro or After Affect ?

    I recently purchased master collection 5 DVD version. On DVD box I have three serial numbers: Master collection, Ppro/AE CS4 32 Bit and Color Finesse. I used Master collection serial to activate my product. I am having 64 bit os, so I did not use Ppro/AE CS4 32 Bit serial.  My question is about Color Finesse  Serial. I searched about it and found it as an Plug-in for Premiere Pro or After Affect. Now where can I download Color Finesse and how I can install them with Premier Pro or After Affect?

    This serial is only required for the CS4 version. The CS5 version does not require an extra serial. Both versions are installed automatically with the main programs. Nothing more to do.
    Mylenium

  • Apple care Model MD012LL/A can be used with MacBook Pro 15" Retina display model MC975TH/A (Model selling in Thailand)?

    Apple care Model MD012LL/A can be used with MacBook Pro 15" Retina display model MC975TH/A (Model selling in Thailand)?

    Why not?

  • How can I record with GarageBand 1.3 in the background using other app?

    How can I record with GarageBand 1.3 in the background using other app?
    I use iPad 2 with iOS 6 and GarageBand v1.3.
    I'd like to play an other app like Sunrizer synth while the GarageBand is recording in the background in a track.
    By now I can do it only using the build-in mic of iPad, but this is not the point.
    Can I record other apps in a GarageBand track?
    Thanks a lot for your time.

    I suspect you are probably correct about the reasoning, although there are already a myriad of ways to do that.
    Don't get me wrong - I never said I like this. But it is consistent with other Apple applications, that are similar restrictive; you cannot take a screenshot, when dvd-player is running for example.
    That are the moments, when I am glad that MacOS X is a unix system under the hood

  • Hi apple am new user to apple i just bought i phone 4s  and  i set up passowrd and forgot it how  and the iphone is not responding now how can i deal with this broblem please helpe

    hi apple am new user to apple i just bought i phone 4s  and  i set up passowrd and forgot it how  and the iphone is not responding now how can i deal with this broblem please helpe

    iPhone User Guide (For iOS 5.1 Software)

  • Need help in multitrack recording with Audigy 4 pro

    Hi there,?I have an audigy 4 pro soundplaster caed and use it with Cubase LE. I haven't figured out yet how to record the several tracks onto seperate?channels simultaneously. All inputs of the soundcard work and I know how to assign the channels to the tracks in cubase. But in the end the same is coming out of all... I have figured out that in the Audigy mixing console you need to select the input source first, but I only can select one. If I select 'what you hear' I can use all - but not seperated. Someone knows how to deal with it'sAny help hugely appreciated
    !!! G

    gun wrote:
    Hi,
    wow, I got a big step further with this, thanks.
    Yes, after pulling the window down ai discovered many moretracks. I also managed to get a signal in cubase by pressing the monitor item. And I could remap inputs. I got my input 3 set up fine. It's in the devie dislaplyed as L and R but witchever I choose works.
    But for my second track it only lets my choose the other otpion of the same input (if trach one is Line 3L its has to be Line 3R for the other input. I did remap the track to to use line in but no signal and in the windows control mixer I still can only select one recording source but it doesn't correspondent with cubase, cubase records line in 3 whichever thing is ticked in the windows mixer.
    Line in does go into my soundcards as I can hear it through the speakers but no further.
    I uploaded the manual onto my own webspace, seemed the simplest thing: http://www.magicviolin.co.uk/Cubase%20LE%20manual.pdf
    Thanks so much again, I actually feel slightly positi've now that I might it even get working...
    The Manual cleared a lot. LE seem to have a bit stripped settings compared to SX, but the logic seem to be the same (maybe LE is ~ SE/SX .0).
    As you have Audigy 4 Pro there, you should see quite many input channels listed on "VST Inputs" -panel. The bad thing seems to be, you have no names for inputs but they're listed as PCI REC & 2, PCI REC 2 & 3, etc. mono pairs. Now you need to examine which one is which (i.e. does PCI REC & 2 mean Audigy's Line-In L/R, PCI REC 3 & 4 as LineIn 2 L/R, etc.). See below.
    NOTE: Inputs being as pairs of L/R channels means you can record to 2 tracks using one stereo input w/ mono connections (i.e. guitar through LineIn L and Bass through LineIn R). Tracks need to be set as mono. When you have one stereo connection or track set to stereo, you get the same signal from LineIn L and R to those tracks you have set the LineIn L or R as input source.
    CT Surround Mixer settings:
    - open those source channels you're using
    - if you use any Creative ASIO driver the .rec source selector has no effect
    Project settings:
    With any Creative ASIO driver you need to set (Project properties)
    - bit-depth (record format) to 6-bit (or 24-bit if using "ASIO 24/96 driver") and
    - samplerate to 48000 Hz (or to 96 kHz when using the "ASIO 24/96 driver")
    See - Activating and selecting VST Inputs - Manual p.2-25 ->:
    - you need to know which inputs are included to AnalogMix() --> you see these listed on Creative Surround Mixer --> rec. source selector.
    - give those inputs (label) the same name they appear on Creative Surround Mixer (i.e. Auxiliary, Line-In, Microphone, etc.)
    --> you need to do these settings once if you save the (empty) project as a template
    See - Mixer p. 7.37 (Audio channel strips)-->:
    - here you can select the Input -channels (remember, which ones are in same group "AnalogMix ()" because they uses the same signal path and therefore gets recorded to all tracks having this source selected)
    Hope you get things cleared, and remember save a well functioning project as Template (you can make templates with various settings (like one for 6/48 w/ audio tracks, other for 24/96 w/ audio tracks, and next for 6/48 w/ audio and MIDI tracks, etc.).
    If you need 'some' VST effects/instruments for your recordings, KVR is best place to start from.
    jutapaMessage Edited by jutapa on 04-06-2006 0:43 PM

  • Can't record with Sound Blaster Live Va

    I have a Sound Blaster Li've Value (on-board) card and can't record streaming audio with it. It plays streaming audio fine, and seems to record it, but the resulting wav or mp3 files are "empty", playing them results in silence. I noticed that there was an old thread about this, but I couldn't find a reply. I tried to find out if this sound chip was indeed full duplex, but couldn't find that information. Any help would be greatly appreciated.
    Cheers,
    Ron

    I have the same message error.
    "The SBPCI Interrupt has been routed incorrectly by the system. AudioPCI Inacti've. Use Automatic setting in the Device Manager."
    I have a Compaq computer and win 98. Ever since we moved, the speakers stopped working.
    I tried going thru system properties and Device manager...it shows that the device is working properly. And the Automatic setting box was already checked. I bought new speakers thinking the speakers were bad but I still get no sound. I followed all the steps for Sound Troubleshooting. I did notice when I went to control panel, multimedia, devices, audio...one of the sound cards said: driver is enabled but inacti've due to an unknown problem. But it didn't tell me how to fix the problem?
    I don't know how to get the sound.
    Can someone help me? I really don't know anything about the computers.
    Thanks in advance.

  • Problems with recording with Audigy 2 ZS Notebook pls pls help????

    hi
    !!! I am try to fix a record from a dj mixer to my Audigy 2 ZS Notebook...every is set ...from the mixer i am using 3.5 mm strero? 2 st RCA to the Audigy 2 ZS Notebook...but when i click record i donot get any signal in ...i am try to record through line in on the record program. but when i try to record with a anther program" sony" its works ....but not the Audigy 2 ZS record program ...pls help ...
    mike

    jkeener7 wrote:
    Thanks I went ahead and got some Logitech Z5500 speakers.
    Hi
    Did you not looked "Audigy 2 Zs Notebook's" User's Guide?
    jutapa

  • New ipod 60GB can you record with it?

    Hi,
    I have a new 60GB ipod. Can I record, by pluging a mic into the headphone jack? If I can record with the ipod, do i need to download some software onto my ipod? Where are the settings, to start recording?
    Thanks

    You can't just plug in any mic.
    Here are a couple of options for now...
    http://www.xtrememac.com/audio/earphones_recorders/micromemo.php
    iTalkPro
    Hopefully more options will be available soon,
    btabz

  • How can i records with date format using web services?

    Hello
    I can't record date records using web services. I get no message errors.
    I can import string values but no dates (YYYY-MM-DD). Do you have any clue about that?
    Regards
    Arturo

    hello,
    That's the code I'm using to update an opportunity. In the date fields (e.g. dFecha_de_entrega_al_cliente) I've tried to put an specific date in the correct format (If i put it in another format i've got an error message due the wrong format). The CRM accepted the code but it didn't update the values that are different of string.
    I don´t know if there is something missing in teh program or if the developer environment is not the adequate.
    Regards for your comments
    Arturo
    Private Sub ActualizarOportunidad(ByVal fila As Data.DataRow, ByVal TipoPersona As String)
    Dim oLog As New Log()
    Dim IdLog As Integer
    Dim NumSerie As String = ""
    Try
    oLog.Insert_Log("Activación Garantía - Crear Oportunidad", oLog.GetLastIdProceso())
    IdLog = oLog.GetLastId()
    Dim sr_input As Opportunity.OpportunityUpdate_Input
    Dim sr_output As Opportunity.OpportunityUpdate_Output
    sr_input = New Opportunity.OpportunityUpdate_Input
    Dim sr(1) As Opportunity.OpportunityData
    sr(0) = New Opportunity.OpportunityData
    NumSerie = fila("NumeroSerie").ToString().Trim()
    sr(0).ExternalSystemId = NumSerie
    sr(0).OpportunityName = fila("NumeroSerie").ToString().Trim()
    sr(0).SalesStage = "Deseo" '"Cerrada/Ganada"
    sr(0).dFecha_de_entrega_al_cliente = fila("FechaEmision").ToString().Trim()
    sr(0).dFecha_de_facturacin_al_cliente = fila("FechaCompra").ToString().Trim()
    sr(0).stNro_Factura = fila("NumeroFactura").ToString().Trim()
    sr(0).plActividad_Economica = fila("IdActividad").ToString().Trim()
    sr(0).plTipo_de_Venta = fila("TipoCompra").ToString().Trim()
    sr(0).CustomObject8ExternalSystemId = fila("ApellidoVendedor").ToString.Trim()
    'sr(0).CustomObject8ExternalSystemId = IIf(TipoPersona = "J", fila("DocumentoE").ToString().Trim(), fila("Documento").ToString.Trim())
    'sr(0).CustomObject7ExternalSystemId = fila("")
    Dim lofsr As Opportunity.ListOfOpportunityData
    lofsr = New Opportunity.ListOfOpportunityData
    lofsr.Opportunity = sr
    sr_input.ListOfOpportunity = lofsr
    sr_output = oOpportunity.OpportunityUpdate(sr_input)
    oLog.Update_Log(IdLog, "Si", NumSerie, "")
    Catch ex As SoapException
    Me.txtError.Text = ex.Detail.InnerText.ToString()
    oLog.Update_Log(IdLog, "No", NumSerie, ex.Detail.InnerText.ToString())
    End Try
    End Sub
    ************************************************************************

Maybe you are looking for