Can't recover Windows due error message

Hi, when I power on the computer I get the message "Launch startup repair" and "start windows normally". I have tried either option and in the repair option I always get to a booting point where the screen gives a message: "The installed program cannot start. click OK to turn off the computer"
In the "start windows normally" option it just stops with a blue screen with white writing telling me that it has stopped booting to protect the computer.
I have also pressed F8 for system recovery, and that also stops with the same message as the repair option message I mentioned above.
What are my options to get this laptop working properly again?
I look forward for a responce soon and thank.
Martin

Hi, if i start windows normally i get a blue screen that says: "a problem has been detected and windows has been shut down to prevent damage" theres also sentances telling me to disable or uninstall any antivirus or backup utilities etc. and at the bottom it gives technical information: stop: 0x00000024 (0x00190444, 0x84eb5290, 0xc0000102, 0x00000000)
this means nothing to me, do you know what it indicates?
I don't have a recovery cd, where can i get one from, also the windows product id is rubbed off on the bottom, i understand that this id is needed when reinstalling?
please reply soon
Martin

Similar Messages

  • I have ipod classic 5gen it will not sync with windows the error message says ipod can not sync as required file missing   wht to do???

    i have ipod classic 5gen it will not sync with windows the error message says ipod can not sync as required file missing   wht to do???

    Although you used the new USB 3.0 port, the actual connection speed is still USB2.0, as the iPod Dock connector, does not have the 10 times faster USB3.0 signal pins, the connection speed is still 480Mbits/s
    I assumed that you have tried the other USB 2.0 port to no success..
    Can you do the iPod Disk diagnostic as posted earlier by tt2, it wont fix your problem, but helps in troubleshooting.
    Have a nice day!

  • I am unable to install iTunes due to Windows Installer error message on Vista

    I needed to update my iTunes since I purchased the iPad2.  My Windows Vista machine will not allow me to update the program due to a "Windows Installer" error message.  I first attempted to update, then I uninstalled and am unable to reinstall the software."There is a problem with this Windows Installer package. A program required for this install to complete could not be run..."

    I finally got the program to install/run.  I downloaded a third copy and saved it again on the desktop.  I selected "Run as Administrator" instead of "Run"  It must have been the 10th plus time I tried to install, but this time it completed.  I don't know if the "Run as Administrator" was the key since it is Vista, or if I just got lucky. Either way I am relieved.

  • I can't install itunes for windows get error message 5

    i can't install itunes for windows get error message 5

    I've been having the same issues for the past year and a half. I've spent 6-8months trying to figure it out. Went to various Itunes stores with pictures on my Iphone per each step so I could relay all information that I'd come across and the personnel were less than helpful, after conversations that would sometimes last an hour between myself, employees and managers they always came back to "simply uninstall then reinstall" when I told them for the thousanth time that I've done that multiple times and my errors are happening while trying to reinstall it they act stumped and say "well then I'm not sure, I'll give you a call if I figure it out" and disappear. I've been very disatisfied at the lack of support from Apple and if Android to piece together a reletively reliable phone I'd switch to them in a heartbeat. I'll follow this question incase someone can answer this, but I don't have much faith.
    BTW, wifey has Windows 7 running on the laptop and my phone syncs just fine to that and no trouble with itunes, just mine (desktop).

  • Windows Installation error message a required ressource can not be located: ms visual c  2005

    no idea what to do. please help me!

    Am 04.11.2014 21:48, schrieb Jeff A Wright:
    >
          windows Installation error message a required ressource can not
          be located: ms visual c  2005
    created by Jeff A Wright
    <https://forums.adobe.com/people/JeffAWright> in /Creative Cloud
    Download & Install/ - View the full discussion
    <https://forums.adobe.com/message/6899407#6899407>

  • I purchased the Iphone 4s yesterday. every time I try to download newest version of Itunes i get a windows installer error message. I went to microsoft and downloaded everything can anyone help?

    I purchased the Iphone 4s yesterday. Every time I try to download newest version of Itunes I get a windows installer error message. I went to microsoft and downloaded all I could please help

    Another Vista Victory!!!  Try uninstalling iTunes, then download and install it again.  Make sure Vista is up to date.

  • Delete windows warnings, error messages from hard drive

    delete windows warnings, error messages from hard drive

    Hello @NeoTaino,
    I have read your post on how your desktop computer is displaying a "delete Windows warning, error messages from hard drive". Did you install any hardware or software recently? What does the full error message state as it appears on the screen? I would be happy to help you, but first I would encourage you to post your product number for your computer. Below is a is an HP Support document that will demonstrate how to find your computer's product number. In addition, it will also help if you indicate which operating system you are using; and whether your operating system is 32 or 64 bit. The more information you can provide, the better!
    How Do I Find My Model Number or Product Number?
    Which Windows operating system am I running?
    Is the Windows Version on My Computer 32-bit or 64-bit?
    Please re-post with the necessary information, this way I will be able to research this further for you. I look forward to your reply!
    Cheers!
    MechPilot
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

  • Cannot access Adobe Folio Builder using Indesign (CS6) on Windows 7, error message is 'An error has occured while trying to sign in to the Folio Builder Panel' [IMS_ERROR_FAILURE]

    Cannot access Adobe Folio Builder using Indesign (CS6) on Windows 7, error message is 'An error has occured while trying to sign in to the Folio Builder Panel' [IMS_ERROR_FAILURE]

    Yes, I can open the DPS portal via the Folio Builder panel within InDesign. Although I have created Folios locally within InDesign CS6, the DPS portal is empty and everthing greyed out with just the text "There are no folios to display. Create folios with the folio builder in InDesign".
    If I try to sign in within the Folio Builder panel in InDesign, I get the error message [IMS_ERROR_FAILURE] . In addition I am also not able to access the "Help" menu from within InDesign although I am connected to the internet.
    To complicate it even further, I am working in the UK whereas all internet control (firewall) and licences are handeled by head office in Germany. I am not sure if this is a firwewall issue or not but if the IT department in Germany could get support from Adobe to understand the access requirements, this may help.
    Hopefully using the forum someone out there will know the answer.

  • Cnat update itunes get windows installer error message

    When trying to update itunes get window installer error message. Running windows vista

    What's the precise text of the message, please? (There's a few different ones I can think of that you might be getting.)

  • HT204406 ITUNES MATCH Windows 7 Error message on upload (Step 3) from PC - 3 times get "Windows close program [iTunes]" with only 30-50 of 500+ songs.  Help!

    ITUNES MATCH - Need help.  Windows 7 Error message on upload (Step 3) from PC - 3 times get "Windows must close program [iTunes]" with only 30-50 of 500+ songs.  Anyone have this issue of iTunes crashing?

    Exactly the same problem here. As far as I can see this problem has been around since Match was first released with no action from Apple to rectify it. I've spent days trying to get this to work now and unless I get a fix soon, I'm going to pull my Match membership and ask for a refund because this is not what I signed up for...

  • How can I get past the error messages that keep popping up when I try to download Flash player?

    How can I get past the error messages that keep popping up every time I try to download anything?

    Hi
    Could you please let us know more about the error messages that you got?
    The following page has information on the error messages: http://helpx.adobe.com/content/help/en/flash-player/kb/installation-problems-flash-player- windows.html
    Thanks,
    Sunil

  • Since reinstalling itunes i can no longer sync. Error message says already synced with another itunes library. I get a blank sync - no songs, photos ect as it comes up with this error whenever try to select what is to be synced. Help - lost everything

    Since reinstalling itunes i can no longer sync. Error message says already synced with another itunes library. I get a blank sync - no songs, photos ect as it comes up with this error whenever try to select what is to be synced. Help - lost everything. Complete nightmare - Apple sort a fix NOW, but will take any help

    Plawexki wrote:
    ...  do you know if the contacts, photos, messages etc will be wiped?
    Yes... Everything will be Wiped and Replaced with what is currently on Your Mac.
    SYNCING with iTunes
    See here  >  http://support.apple.com/kb/HT1386
    From Here  >  http://www.apple.com/support/iphone/syncing/
    You may find this information of interest...
    Have a read here...
    https://discussions.apple.com/message/18409815?ac_cid=ha
    And See Here...
    How to Use Multiple iDevices with One Computer

  • I cannot update my ipad2 to ios5.  Updating through iTunes on pc Windows Vista, Error message reads "cannot connect to iPad Software Update Server.  Tried resetting network settings, still not connecting.  Tried updating iTunes, still not connecting.

    I cannot update my ipad2 to ios5.  Updating through iTunes on pc Windows Vista, Error message reads "cannot connect to iPad Software Update Server.  Tried resetting network settings, still not connecting.  Tried updating iTunes, still not connecting.

    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    Additional things to try.
    Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
     Cheers, Tom

  • I installed a new printer and now Photoshop Elements tells me I can't print.  The error message is "The saved printer information is not compatible with this version of Photoshop Elements, or the saved printer is no longer available.  You will need to che

    I installed a new printer and now Photoshop Elements tells me I can't print.  The error message is "The saved printer information is not compatible with this version of Photoshop Elements, or the saved printer is no longer available.  You will need to check your printer settings before printing."  I have uninstalled and re-installed Photoshop Elements, checked my printer settings and still I can't print a photo.

    Hi ,
    Please update to PSE 13.1
    13.1 has solved this problem.
    Refer to this link.
    Photoshop Elements Help | Printer errors with Photoshop Elements 13

  • I have open office.  Someone sent me e-mail I can't open.  get error message power pc no longer supported.  How do I open this doc?

    I have open office.  Someone sent me e-mail I can't open.  get error message power pc no longer supported.  How do I open this doc?

    Right click your document, hover over "Open with..." and then click "Other".
    Find TextEdit and click "Open".
    TextEdit will then do it's best to open your document.
    If you have iLife, do the same but instead of opening with TextEdit open with Numbers, Pages, Keynote, e.t.c.
    To download iLife, click here.
    If the above link does not work, click here.
    -----EDITS-----
    Added "If the above link does not work" at the bottom of the post.
    <Edited by Host>

Maybe you are looking for

  • Can I get my money back for a purchase I did not authorize

    My son purchase two items today that I did not authorize can i get my money back

  • MS Word Problem

    Hi! I use MS Windows XP (SP 3), MS Office 2003 (v. 11), and Acrobat 9 Professional. I am having problems with MS Word. First, it takes a long time to load a document. Second, when I close the document, I get a message that the system has encountered

  • Iweb problems and idisk problems are they related?

    I have not been able to publish siince upgrading to iweb1.1 two days ago I get the same message everytime "Publish failed due to a network error. Check your Internet connection and try again." Also I can't get into "idisk" on the web or the finder ba

  • Exchange Gateway; MIME.822 header missing

    Hello! The MIME.822 header is stripped after passing through the GW 7.x Exchange Gateway. As told in TID #3878409, this works 'as designed'! Unfortunately we need the MIME.822 header information for SPAM handling and other reasons (i.e. compliant e-m

  • Publishing in CP 4

    Hello! This has been happening sporadically over the last couple of weeks and I wanted to see if anyone else has ever run into this problem.  When I go ahead to publish the file (usually as Flash -> Export to html) the program saves the file and just