Can't register printer to HP Connected

I typed in the code into HP Connected, but it still says that I have no devices registered. I tried to put in the code again, but it said that it was already registered. I was wondering if anyone knew how to solve this problem.
Thanks

Hi lhuete,
If you have still not got the printer in HP Connected. De register and register the printer to get a new printer code and enter that in your HPConnected account.
Kind Regards,
Oliver
"Although I work for HP, I'm speaking for myself and not on behalf of HP"--Please mark the post that solves your problem as "Accepted Solution"
"Say "Thanks" by clicking the Kudos Star in the post that helped you.

Similar Messages

Can my iPhone print to printers connected via Airport Extreme?

Hey forum,
So I know this thread has been brought up more than a few times, but I feel like either new information could have been found or Apple has initatied some sort of change to allow it. The basic scenario is that in two households (one my own, the other a relative) housing a Time Capsule and Airport Extreme Base Station, each with a printer connected via USB. Things work perfectly on my iMac, MBP, and Windows machines but my iPhone won't print because of the Airprint shenanigans that I don't understand. Essentially, can I print from my iPhone now without any hacks or third party apps?
Thanks!
Ethan
Used products include: iPhone 3Gs (iOS 5.0.1), iPhone 4 (iOS 5.0.1), MacBook Pro 2.16 Core 2 (Mac OS X 10.7.2), iMac (Mac OS X 10.7.2)

Air print is for Air print enabled printers only.
There are some wifi printers that have there own app that allow you to print to them, but onlt limited apps will be supported by this.

Can't find network key to connect to new printer using Airp. Extreme

I am trying to add a Brother MFC J651WD multi-function printer to my home network. I have Airport Extreme (square one) and my Macbook Pro can see the printer but not connect. It appears to want a NETWORK KEY. I've tried my airport password and other ID's to no avail. Any suggestions are helpful! I have latest Mac OS 10.xxx.

silveredd wrote:
How do you delete your post off this site after you are done?
You don't; all posts are maintained as a matter of record.

Can't ADD printer

I believe that this started immediately after upgrading to 10.4.6, but I'm not absolutely sure of that:
Whenever I use Printer Setup Utility and reach the point of ADDing the driver for my printer (an Epson Stylus Color 777i), I always get the dreaded:
An error occurred while trying to add the selected printers.
server-error-service-unavailable
Yes I've tried "Reset Printing System...", I've re-used the 10.4.6 Combo Updater, I've used Disk Utility to Repair Disk Permissions, and I followed the recommendations in http://docs.info.apple.com/article.html?artnum=107054. I ran the Cron scripts using Cocktail (whick got hung doing that--I had to force quit the application.) Using Terminal, I followed a suggestion (which I can't now recover) to check that CUPS was running (it is, although it showed an earlier date, not today's.)
Epson has given up on me, after I followed suggestions like:
Try reconnecting the cable at both ends - ensure it is properly connected -
the printer should have a solid green light on with no red lights.
Please go to :
HD > Library > Printers > Epson >Inkjet Printers
There should be an icon for the 777 in there (SC777.plugin or Stylus Color
777.plugin or similar - it will mention the printer)
if the plugin isn't there please reinstall the downloaded driver.
If the plugin is there, proceed:
Double click on the Macintosh HD
in the white area on the top right, type in com.apple.print
the entries should now be found, if not please hit the RETURN key on the
computer keyboard.
Trash all entries that come up (if any come up).
Empty trash.
Restart the Mac.
<<
and
<div class="jive-quote">
Please follow the instructions below to completely remove and reinstall the
resident Epson driver package for your printer. You can leave the printer
on and connected throughout.
REMOVE FILES
1. Double click on the MAC HARD DRIVE.
2. Double click on the LIBRARY folder.
3. Double click on the PRINTERS folder.
4. Drag the EPSON folder to the trash can.
5. Close any open windows.
6. Double click on the MAC HARD DRIVE.
7. Double click on the LIBRARY folder.
8. Double click on the RECEIPTS folder.
9. Delete any "Epson" receipts.
10. Close all open windows and restart your computer.
REINSTALL THE EPSON DRIVER PACKAGE
1. Insert your Mac OS X 10.4 Install disc. Open CD when it appears on the
desktop.
2. Find and double-click on the Optional Installs.pkg.
3. After the installer opens, choose the following custom install options:
-Check "Printer drivers" and use arrow next to this entry to expand this
category.
-Check "Epson" below the "Printer drivers" heading. (You do not need to
install other manufacturer's packages.)
4. Click "Install" and follow prompts to reinstall the resident Epson
printer driver package. Restart the computer after installation is
complete.
<<
I've probably spent 25-30 hours on this problem, with no change in the result. Can anyone help?
Mucho TIA >> Robert
iMac DV 400 MHz Slot-loading CD-R Mac OS X (10.4.6)

Good advice, Greg. (Much quicker than the many hours I spent trying to find and fix the problem!) After reinstalling 10.4, I used the latest Combo Updater for 10.4.7. Printing still works, so I'm a happy camper.
Thanks very much.

My ipad with retina display can't find my epson artisan 730 wireless printer. They are on the same network and printer's wireless connection is excellent. What are the steps to fix this?

My imac won't pick up the printer either. Even after I updated it's software. My ipad is new. Any help would be appreciated. Thanks!

No change. The printer still doesn't show up on my devices even though they are all on the same network. On the printer's connection print out the connection reads Pass and that the network is working correctly. However, then it states "*A router/access point channel conflict has been detected. If you have problems printing or scanning, Improve your wireless network environment." "*If the problems persist, see your documentation for help and networking tips."
I've gone through all the documentation and still can't figure out what the problem is. I've had the router checked out by my building and they claim everything is in order. I have a excellent signal.

How can I fix my MacBook Pro losing wireless connectivity with Epson Stylus NX625 printer. It will work once and then I get an error saying the printer is not connected.

I can connect to my Epson Stylus NX625 through my wireless network and print a page or two, but then the next time I go to print it says that the printer is not connected. Any fixes? I have tried deleting the printer and re-adding it to my MacBook Pro OS X version 10.9.4, but sometimes it doesn't even find it, and other times it says it is connected, but when I go to print it says not connected. Very frustrated. I have also installed the latest drivers, etc.
What now?

Your computer is going to run hot while playing CPU/GPU intensive games - it should heat up and the fans should be noticably loud. As to why it's 'crashing' - can you post a kernel panic log? You may have some third-party kexts that are causing the problems.
Clinton

Can no longer print to Canon printer connected to Airport Extreme

My Canon MP830 is connected to my Airport Extreme. Bonjour on my Windows 7 Acer laptop sees and installs the printer. I have been printing to the MP830 successfully from wired and wireless computers on my network this way for around a year. Today, I can no longer print to the MP830 unless I connect it directly to a USB port on my Acer. Bonjour can still see and install the MP830 when it's connected to the Airport Extreme, but I can't print to the MP830.
Any ideas?

Sounds a bit like a problem being discussed in this thread:
http://discussions.apple.com/thread.jspa?threadID=2651093&tstart=0
I suspect some kind of update is at fault. Like you, my printer/base station setup had been working fine until recently.

I can no longer print using wifi. I have to connect a USB cable to print. Setup and pref show that I should be able to print wireless but I keep getting printer not found msg when trying.

I can no longer print via wifi. I could at one time but now I have to connect to printer with USB. All settings appear correct in printer and macbook. Sys pref shows printer with green light next to idle. Sending a print prompt results in "searching for printer, printer not found, ensure printer is turned on". I have reinstalled printer in my print list and reinstalled printer software on macbook. Kodak 5250 AiO printer shows it's configured for and on wifi channel. I go online with laptop using wireless but cannot print. Help!

If you know the IP address of the printer, then you can check if there is a working path between the Mac and printer. This can be done using Network Utility or a web browser.
If you open Network Utility and select the Ping tab, you can enter the IP address of the Kodak and then press the Ping button. If there is a working connection then you should get a reply to each packet sent.
With the web browser, many devices have a built-in web server so you can type the IP address of the printer into the browser and if there is a working connection then you will open the printers web page.
So, are you able to confirm you have a working connection between the Mac and printer?

Can't use my HP Deskjet F4580 Wireless Printer with the AirPort Extreme Base. The printer is NOT connected at the USB port of the AirPort Extreme, and is placed in another room. It worked just fine with my previous router (Linksys WRT54G). Help me!

Hey Guys!
I just got my AirPort Extreme Base, but I can't use my HP Deskjet F4580 wireless printer with it.
The printer is not connected to the AirPort Extreme's USB port. It is placed in another room, and I'd like to use it (the printer) wirelessly (not connected to the USB port os the AirPort Extreme), as I used to. There is no place for the printer close the AirPort Extreme. It worked just fine with my previous wireless router (Linksys WRT54G). I'm very disappointed with the AirPort Extreme Base Station because of that!...
Can you help me? Please?!
Thanks Folks!

This must be a tough one, no suggestions at all.

Ipod won't connect? can't register it either

I just got an ipod nano 3rd gen. today. I downloaded the latest version of itunes, just like the directions said. The songs went to itunes without any problems. The problem is: the ipod screen says connected, eject before disconnecting. The little battery at the top doesn't look like it's charging. It's just white/light gray with a little black plug thing in the center of it.
When I plug the ipod in, it automatically opens itunes. But when you try to find a song on the ipod, it says no songs, no music, no files blah, blah, blah. When I click on the little ipod icon in the list on the left side of itunes, it gives me an option to register the ipod later. It looks like my monitor cuts off the right side of the screen, so I don't know if there's a register now option. I even hooked up another monitor, which is about 19 or 20 inches, I guess. It does the same thing. The right side of the screen is cut off. I can click on the ipod icon again, and see the license agreement. I clicked the box at the bottom and hit save. The thing is, part of that sentence saying that you agree to the terms, is cut off.
All I see is:
"I have read and agree to the iPod Software License Agr"
I don't know what the rest of it says. And there is NO scroll bar at the bottom. I've tried shrinking the window and stretching it to the right, but it won't stretch. I don't know if the ipod won't work bc I can't register it or what. I even uninstalled itunes and re-installed it. Still does the same thing. I'm totally confused. ANY help would be appreciated.
Thanks, Randi
I'm also on yahoo messenger:
randi127

Resize the screen resolution to 1024 or larger (right click on desktop and pick Properties then go to the tab for screen resolution).
Patrick

HT4356 I can see my printer and iPad on router but iPad cannot connect to printer. Printer is on list of air printer models accepted. Help!

I can see my printer and iPad on router but iPad cannot connect to printer. Printer is on list of air printer models accepted. Help!

You may have to visit the printer manufacturer's web site and look into their support pages to get a print driver for your Mac, and install it. Or see if you can see if a driver may already be in your Mac by checking settings, since there are many drivers already installed in Mac OS X.
Good luck & happy computing!

I can not register my Adobe acrobat xi. I continue to get messages please connect to the internet an

I can't register. when i try it say reconnect to the internet and try again when i do it offline I cant get my request codes. what do i do to register?

This is a Windows error. See this support document for help. iOS: Unknown error containing '0xE' when connecting to a Windows PC

MY Ipad2 (iOS 5.0.1) can't see the printer canon mg6250, connected on wi-fi, seen by my Pc. Someone could help me?

Problems with Ipad and Canon printer PIxma Mg6250.
MY Ipad2 (iOS 5.0.1) can't see the printer canon mg6250, connected on wi-fi, seen by my Pc. Someone could help me?

You need to update the printer's firmware to 2.0.
Go to http://www.canon.ie/Support/Consumer_Products/products/Fax__Multifunctionals/Ink Jet/PIXMA_MG_series/PIXMA_MG6250.aspx?type=download&page=1
It is really hard to find what you need but it is at canon Ireland.

Can you print from an ipad to a wireless printer if the printer is not connected to the internet?

I am purchasing an iPad for my mother; she lives in a farm with no possibility of high speed internet, however, Verizon does have good cell phone coverage there.
So here is my question: she will have an iPad with 3g internet access. I want her to be able to print to a wireless printer; however, the printer that I buy will not be hooked up to any computer or internet...
1) can a wireless printer be discovered on the ipad without any additional hardware?
2) will i need to purchase a router and hook this router up to the printer to send out the wireless printer's signal?
someone please help. her ipad won't be much good if she can't print docs and photos.
thanks in advance...

It sounds like her situation is like mine at school--I find what I want with my Internet capable network, then switch to my ad hoc network for printing, so make sure she's comfortable going into settings and turning WiFi on and selecting a network.
And make sure you allow yourself time for the initial printer setup--and do that somewhere where you have Internet access for the firmware updates and test the printer and then do the ad hoc setup at her home.
(You can also use an Airport Express to set up local network and just connect to the Internet (and ignore the warning light). I played around with this and it's a much more powerful network but overkill for what most people need.)
The ad hoc network just requires a name and a WEP password. Make sure you write down the password and the network name in case she has to join the network again.
I actually found the Amazon reviews for my printer very helpful in terms of explaining the set-up process.

After download of Photoshop, it will login in and register. it says no connect available, however I can login through browser. Can you help

after download of Photoshop, it will login in and register. it says no connect available, however I can login through browser. Can you help

If deleting opm.db file and Signing in , did not work , please follow below steps:
Open C:drive and navigate to C:\Program Files (x86)\Common Files\Adobe.
Open Adobe folder and delete folders named Adobe Application Manager and OOBE.
Disable Anti-Virus and Firewall temporarily.
click on the below link an download Adobe Application manager and install the same .
http://download.adobe.com/pub/adobe/creativesuite/cc/win/ApplicationManager8.0_all.exe
Once the installation process is completed, locate Adobe Application manager shortcut on Desktop and double click on it .
It will start update process.
Once update process is completed.
Try Signing in to Photoshop application and check.

Can't register printer to HP Connected

Similar Messages

Maybe you are looking for