Can't reinstall my LR trail started only yesterday
Hi,
Yesterday i installed the LR trail ysing the CreativeCloudSet-Up.exe - no problems. Due to issues not related to LR or Adobe i had to restore my Windows 7 to a restore point prior to installing LR, i.e. my LR installation had gone. Then i tried to run the CreativeCloudSet-Up.exe again but get the error "Installer failed to initialize".
Regards
Erik
Can you go to the Windows control panel and see if Adobe Creative Cloud is still showing as installed. If so highlight it and then click the uninstall button. Otherwise follow these instructions:
Navigate to the following location and find the OOBE file:
C:\Program Files (x86)\Common Files\Adobe
Please rename OOBE folder to OOBEE.OLD and then close the Adobe folder.
Return to the link I provided in my first post and try the download again.
Similar Messages
-
HT1338 My MacBookPro will not open Safari. This fault started only yesterday (1st Jan 2013)
When I try to access Safari from my dashboard it tells me I am not connected to the internet. I am connected though!
I have to use Yahoo home page.
This fault only began yesterday (01/01/13)
I have downloaded my updates.
The original message when I tried to access Safari, told me my 'PC' was not working & I should 'fix now'.There was aslo a microsoft logo on the screen. Could this be a virus?I'm a bit confused as to what you're seeing. You say Safari isn't working, but then you say you have to use Yahoo... what browser are you using to access Yahoo?
If you were shown a message saying that your computer was infected and needed to be fixed now while you were browsing the web, you probably stumbled onto a site that had been hacked to trick the user into installing "fake anti-virus" malware. However, at this time, there is no such malware for the Mac, so this was undoubtedly something that would only work on a Windows machine (unless you have discovered something brand new).
What did you do when you saw this message? If you immediately quit Safari, it's possible it has gotten stuck trying to re-open that page every time you open Safari. Try quitting Safar and then holding down the shift key while re-opening it. This will prevent it from attempting to re-open sites that were open when it quit. -
I can't exit Home Sharing on start up. My only selection choice is Computer or Settings.
I can't exit Home Sharing on start up. My only selection choice is Computer or Settings.
Welcome to the Apple Community.
Try the following steps, check whether things are working after each step where appropriate, before trying the next.
1. Restart the Apple TV (Settings > General > Restart).
2. Restart the Apple TV by removing ALL the cables for 30 seconds.
3. Restart your router. (Also try removing it’s power cord for at least 30 seconds)
4. Reset the Apple TV (Settings > General > Reset > Reset all settings)
5. Restore the Apple TV (Settings > General > Reset > Restore) -
I ran iTunes update 11.1.4.62x64 on a PC Win 7 and got "apple mobile device failed to start verify that you have sufficient privileges to start system services" and got kicked out of the install process? I deleted iTunes, ran download to reinstall, and now I can't reinstall - same error message. I am logged onto the PC as Administrator. How do I downlaod and install iTunes.
Try the following user tip:
Troubleshooting issues with iTunes for Windows updates -
i install windows 7 on my mac pro. and participate in windows 7 to 50gb 2 disk. but now i cannot enter my mac. only windows is appearing what should i do. when try enter my mac want me to format rest of the disk. how can i reinstall my mac?
If you use Windows program to partition the Hard Drive, the Apple partition gets destroyed.
Windows does not understand it is a guest on your Mac, and throws garabge wherever it pleases. -
If I install Windows 7 on my MacBook Pro using Bootcamp, now having 2 start up drives, do I select the Windows drive, then I can install a software program that runs only on a PC?
Thank you
-
My MacBook Air lost mac os x. So I would like to reinstall mac os. But I can't select the disk to install mac os x. Only Recovery HD is shown and I can't select it. How can I reinstall my Mac os x? Thank you!
you can download the mac os x recovery hd and run the setup to a flash drive using another mac computer running os x 10.7,(so that while installation the os x setup can varify your computer's serial no. and provide you the installation setup through internet)
or the time machine backup(if you have)
Now boot through the flash drive and follow the steps to install mac os x
here is the link to download the recovery hd for flash drive
http://support.apple.com/kb/DL1433
see this before you download
http://www.apple.com/macosx/recovery/ -
Won't start-up, can't reinstall after latest update
I was running the latest update that included a os x combined update and a firmware update. All was going well, and then the laptop restarted with the firmware update progress screen. The computer restarted abruptly, and never started up correctly since.
Here's where I am now:
The boot process is very slow and takes much longer then usual. Eventually my desktop background loads, along with the desktop icons. The menubar on top loads too. The dock does not load, and I can't open anything through the desktop icons. I can use quick-preview (pressing spacebar), but can't open any application. None of the dropdown lists work on the menu bar. Occasionally, the screen switched to black and blue and back to the usual desktop.
Nothing works, opens, or can be accessed. Even the power button works, I need to shutdown with shift-control-option-power.
I tried to reinstall osx, or at least access disk utilities to make some repairs.
If I press option during the boot with the CD in, nothing happens, and I wind up the same position as described above.
If I press C instead, I get a kernel panic during the boot process.
I tried the CD on a different mac, and it worked fine.
I'm stuck!!! Can't reinstall, can't fix, can't access!!!
Any ideas or experiences with fixing this?What's the precise text of your message, Callum? There's a few different ones I can think of that mention reinstalling iTunes.
-
When I start the iTunes program it comes up with this.. pls help!!
"The program can't start because AVFoundationCF.dll is missing from your computer. Try reinstalling the program to fix this problem."
Even after reinstalling iTunes doesn't start!Repair your Apple Application Support.
Control Panel > Programs n Features (Win7) or Add n Remove Programs(XP) > highlight AAS, click CHANGE then REPAIR. -
Hi, Accidentally somebody screw up Photoshop CS4 and InDesign CS4 Master edition on a MAC computer in the school. The install discs did not start to run therefore I can't reinstall the 2 missing programs. I want to install the softwares, therefore I download those from here. The downloaded program refuse to accept the serial number which was given to the school when they purchased the Master Collection CS4 MLP A00. Thank you for your help, in advance.
Hi Jeff,
Thank you. I am a little bit busy at work, sorry for the delayed reply. I tried to solve the problem, but it still exists. The 3rd of the Adobe disk is damaged someway. I tried to run on my mac at home and it has a failure. So I think we have no other choice that to download the full pack of master collection. I had a discussion with the IT expert and he figured out that company does not exist any more from where they purchased the Adobe Master Collection for Mac and PC. So If you would be kind to help me, what kind of information ID or any kind of document would be needed to identify the purchaser institute (us). I don't think any of us has an account at the Adobe. I will try to figur out. I desperately need to replace Photoshop and InDesign as without them it's really harsh to teach the kids fot the graphic design.
Sincerely yours.
Peter -
Since today my Creative Cloud starts only with white background and nothing else. I reinstalled it two times, but the Problem still excists.
Thx for help
BPHi,
Please try this--
1. Quit the CC Desktop application by clicking on the 'Tools' icon (top-right) and choosing quit from the drop-down.
2. Go to C:\Users\<username>\AppData*\Local\Adobe and rename OOBE folder to OOBE.old.
Launch CC Desktop application again.
*AppData is a hidden folder.
Let me know the outcome.
Regards
Sarthak -
Can i start only Java Instance
HI,
I installed both JAVA+ABAP stack in Nw2004s.can i start only Java STACK(java instance) with out starting the ABAP instance from SAP MMCHi Surya,
Under normal circumstances the persistence store for an ABAP+JAVA stack is the ABAP system, therefore, your system may not work without the ABAP stack. If you need just the java stack, I would recommend that you install a JAVA only system.
Sajit -
SLD server has not been started & Only local system can be administered
Hi
After I installed the NWA sp16, I see two warning message
SLD server has not been started
Only local system can be administered
on the NWA Overview page.
I checked the SLD server is running, and I executed all the NWA scenario template files without any errors.
Can someone tell me what I might have missed?
Thanks
JustinHi Justin,
do you have the most topical Monitoring Setup Guide (https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/43f30e51-0a01-0010-f59a-fecea2b95b2c)? In chapter 5.6 this error is descibed.
And another thing: does your SLD run in the central monitoring system, as demanded in the Monitoring Setup Guide, chapter 5.3.1? This CTC template does only work in case of a local SLD.
Hope that helps.
Dirk -
how I can unlock an encryption on my macbook pro ? device is not starting only with sos sound & black screen I don't know what should do ?
You have to take the computer to the Apple store.
http://support.apple.com/kb/HT4790
Best. -
When I ring someone from my iPhone 4 they can't hear me sometimes and other times they can hear me fine. This has only started happening since I updated to iOS 6 it was perfect the day before.
Good news! I believe I have fixed my phone!!
A friend of mine was having the same problem that I was having where you could hear other people but they couldn't hear you.
We fixed the problem by redownloading the 4.2.1 update. 4th post down on this page: http://forums.macrumors.com/showthread.php?t=1052794&page=5 is a list of links to the update files. I downloaded the one for my phone and did a restore (from a backup) after downloading the file and double clicking it so iTunes opens. Since I've done this my phone has been working perfectly again!
It might take you a few tries, it took my friend 3 tries until his worked right and it worked for me on the first try. I'm guessing something was screwing up during the download.
Maybe you are looking for
-
When I save a file that I have been working on I get 'Could not save (file name) because the file is already in use or was left open. How do I not get this message?
-
Airport express software for mac air
how can i get the sofwate for airport ´xpress on my computer
-
Udev to map multiple entries to *few* *partitioned* devices
Having read then followed wiki's Using udev to map multiple entries to a device, I cannot yet adapt it for my externel 160GB partitioned HDD. Here is what I have : - plugged the HDD to my laptop with no other external storage - Found its supposed SYS
-
Why does it not show all the pictures when i open myspace
Hello, I have apple mac pro desktop. When i open some profile on www.myspace.com, does my computer not show all pictures on that profile site. Can some one tell me if i need to download some software or plugin to see all pictures on the pages. I use
-
Unable to recognize blank DVD+R
When I insert a blank DVD+R into the cd/dvd drive, the system goes through its usual gyrations and then about 15 seconds later the drive bay opens, and there are no error messages. It appears that the drive or system is unable to recognize a blank DV