Can't reinstall Tiger on Mac Pro

We have a Mac Pro 1,1 with OS 10.4.11 on it. It is heavily corrupted and we want to wipe it and reload the OS. I tried 10.5 disks, but they cannot be used on this machine, so I tried the Tiger disks, but they said the same thing. I noticed that they are not the OEM disks, but a "Family Pack". I also noticed that I cannot boot to them. I hold the option or the C key and it boots to the HD. I tried startup disk, but the Tiger disk is not visible. I hesitate to wipe the drive (using the 10.5 utility) and then find I cannot load any OS on this machine. Any advice?

ghstd, welcome to Apple Discussions.
The MacPro has an Intel processor. It uses a special version of Tiger that is on the installers that came with the Mac. Do you have the installer? The family pack Tiger installer is for a PowerPC processor Mac.
Leopard can be used on your Mac, but you need to use a retail installer & not a gray installer from another model Mac.
Two things you might try.
Boot in Safe Mode? See
What is Safe Boot, Safe Mode? (Mac OS X)
http://docs.info.apple.com/article.html?artnum=107392
Takes a while to run, but it can correct some problems.
You may have some directory corruption. DiskWarrior can fix that. DiskWarrior by Alsoft
http://www.alsoft.com/DiskWarrior/index.html
 Cheers, Tom

Similar Messages

Can't reinstall Tiger after doing System Restore

My G5 went into meltdown mode today--everything froze while my mom was using Firefox, and the crash forced me to run the System Restore DVD. Now I'm back to 10.2.7, which means not much will work...but for some reason, I can't reinstall Tiger! Early on in the re-upgrading attempt, I get "There were errors installing the software", and I'm forced to quit. Is something wrong with my copy of the Install DVD? Could it be damaged? I've been using 10.4.5 since last week, along with Security Update 2006-002 v1.1, and things were just fine until today.

Though this may sound amateurish, I have everything backed up to a series of DVD-RWs using Retrospect 6.1 . My family has never used the computer so much or stored so much on it that we have ever needed to backup to an external hard drive, though that would have been more prudent.
As for the main system, other than the model listing below, it's set up like this:
Main HD: Single HFS+ partition, stock configuration, 160GB, Journaling enabled
RAM: 512MB stock
Added internal peripheral: Pioneer DVR-110D SuperDrive (replaces stock DVR-106)
External peripherals: Kensington USB keyboard and mouse, HP DeskJet 842C printer, Motorola SURFboard SB5100 cable modem, Cambridge Soundworks PC Works speaker/subwoofer set,
was using Epson Perfection 1260 PHOTO scanner until recently, APC Back-UPS RS 800 battery backup, Belkin powered USB hub (attached to keyboard), SmartDisk diskette drive, USB cable for Palm PDA
Major non-Apple system utilities: Symantec Norton Antivirus 10, Allume StuffIt Deluxe 10, Tech Tool Pro 4, DiskWarrior 3.0.3 (not installed, on bootable CD only), EMC Insignia Retrospect 6.1.204
Hope that's not too extraneous.
I'm aware I'll have to reinstall the utilities if I manage to get back into Tiger. I'm waiting for a Retrospect 6.1 Disaster Recovery CD to arrive before I proceed with the reformat, since the only copy I have now is from a download.

How can I configure my new Mac Pro to output the timeline via HDMI

How can I configure my new Mac Pro to output the timeline in FCP 7 (yes, I have X, but I'm using 7 right now). I have two monitors running from TB2, but want to have the third for a client monitor.
If I use all three via TB2, it's literally three monitors, and I want to edit on my CineDisplay. I only want the client to see the timeline video on the third monitor. When I hook up HDMI I get no signal, in fact, I can't have the HDMI cable hooked up for TB2 to work with the third.
Thanks,
GEvans
DarthPro
3.7 QCIntelXeonE5
12 GB
AMD FirePro dual D300 2048MB
OSX 10.9.2

If you use all ThunderBolt displays, or stick with DisplayPort and Mini DisplayPort (free conversion between the two with only a cheap cable) you can have up to six displays.
If you attach "legacy" displays with "any-old adapter", you can have up to two, and the built-in HDMI counts as one if you use it.
Any more requires ACTIVE Adapters.
The US$100 Apple ACTIVE Mini DisplayPort to Dual-Link DVI adapter works in every case, even displays over 1920 wide.
StarTech and Accell make US$35 ACTIVE adpters that work for displays up to 1920 wide.

I'm having multiple crashes on my new 5s. I can't connect to my Mac Pro!! Power cord broken. How can I fix this without connecting to my MacBook? Very frustrating and disappointing. Please help!!!

I'm having multiple crashes on my new 5s. I can't connect to my Mac Pro!! Power cord broken. How can I fix this without connecting to my MacBook? Very frustrating and disappointing. Please help!!!

Hi there Rlong50,
You may want to try force closing all open apps and resetting the device as an initial troubleshooting step. Take a look at the articles below for more information.
iOS: Force an app to close
http://support.apple.com/kb/ht5137
iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting
http://support.apple.com/kb/ht1430
-Griff W.

How many system can i download to my mac pro?

how many system can i download to my mac pro?

siren7400 wrote:
...I'd like to load OS 9 onto my Mac Mini and still have the option of using the already loaded OS X. Is this possible on this machine?...
Very likely your best chance of managing that would be to use the software and instructions found here.

How many Sapphire Sapphire RADEON R9 270X can i install in my mac pro 2009?

How many of the graphics cards can I install in my mac pro 2009? Sapphire Sapphire RADEON R9 270X
Thanks

Why? do you use FCP-X? that will benefit from two. Also gaming in Windows where you can use Crossfire
You have two 6-pin power feeds so you will need a small 450W PSU - those come with two 8-pin and two 6-pin.
Those can often fit in the optical drive bay and cost $25-75 range.
"500W" is NOT for the card! that is the minimum PC PSU only!
when buying look for card that uses only two 6-pin and not an 8-pin power.
75W for the PCIe slot, and 150W from two 6-pin cables, most GPUs fall into the 200-250W at maximum stress levels8-pin is basically two 6-pins and 150W feed
> we CrossFired a pair of Radeon R9 270s in our 2010 Mac Pro tower. Under Windows 7 64bit Ultimate, it registered 145 FPS in the Diablo test.
http://barefeats.com/tube06.html
Keep in mind that the Mac Pro tower can't feed enough power to the dual 980s, dual 290Xs, or dual 7950s.
We used an auxillary power supply to compensate.
For the hard core GPU rendering, there are external expansion boxes with their own power supplies.
In an earlier article, we featured the Cubix Xpander which facilitated the connection of 5 GPUs to the Mac Pro tower.
If you favor an AMD GPU like the Radeon R9 290X, MacVidCards can modify it to run at PCIe 2.0 bandwidth in your Mac Pro tower.
The Sapphire Radeon R9 7950 Mac Edition is available from OWC and TransIntl.
February 6th, 2015 -- Dual GeForce GTX 980s vs other Dual GPUs running multi-gpu 'aware' apps
February 6th, 2014 -- (UPDATE) GeForce GTX 980 GPU versus 8 other GPUs running Games and OpenGL Benchmarks
January 29th, 2015 -- GeForce GTX 980 vs 9 other GPUs running Resolve, LuxMark, and Octane Render
December 28th, 2013 -- Does Final Cut Pro X 10.1 render faster on Mac Pro towers with Dual AMD GPUs? What about Motion 5.1?
Things to keep in mind:
The Radeon R9 280X we used was 'un-flashed.' It booted OS X fine but there was no startup screen. Also, when we checked the speed of CPU-to-PCIe-to-CPU communication, it appeared to be running in PCIe 1.0 mode instead of PCIe 2.0. However, unless the GPU intensive app saturates the PCIe 1.0 bandwidth, it will not run any faster in PCIe 2.0 mode. http://barefeats.com/tube12.html
Which is one reason why you might want to buy pre-modified cards from http://www.macvidcards.com

HT201343 How can I make my 2013 Mac Pro been compatible with airplay & mirroring display

How can I make my 2013 Mac Pro been compatible with airplay & mirroring display ?
Thanks for any help !

2013 Mac Pro would be compatible
http://support.apple.com/kb/ht5404

How many photos can i download on a mac pro?

how many photos can i download on a mac pro?

That's like asking how many cows can I get into a field. It depends on the size of the field, size of the cows, the terrain of the field, etc. We could use a bit more information on what you're trying to accommplish:
1 - where are the photos being downloaded from.
2 - how big are the photos?
3 - where are you going to put the photos, i.e. into folders, into an iPhoto library?
4 - how big is the hard drive in the Mac Pro and how much free space do you have on it?
etc., etc, etc......

ATI FirePro V9800 work with Mac OS X? Can be installed on a Mac Pro 8 Core 2011?

ATI FirePro V9800 work with Mac OS X? Can be installed on a Mac Pro 8 Core 2011?

I hv tried installed FirePRO V5800 on 2012 MAC PRO ,no luck
* hear boot chime but no display output

Is it possible to run both Yosemite 10.10.2 and OS X Tiger in Mac Pro?

Is it possible to run both Yosemite 10.10.2 and OS X Tiger in Mac Pro?

Not with a hack.
Only the 2006 and be the 2007 shipped with Tiger. See;
Mac OS X versions (builds) for computers - Apple Support
However, for ML and later on a 2006/2007 you need a hack
http://oemden.com/sixty-four-on-thirty-two-sfott/

Reinstalled software on mac pro, now can't sync mac pro, macbook, iphone, iPad. tried to rip a cd to iTunes, was told i didn't have access to itunes media folder or a folder inside it. i was directed to go to finder to deal with it. nothing helped.

I've had big problems since the reinstall. can't use past itunes purchases, can't share properly across my different devices. all my devices use the same login in id and password. still, my main computer - the mac pro, which i did the reinstall on - is treated like a stranger. it's a big hassle, because i'm use phone, macbook, and mac pro interchangeably. today i tried to rip a cd to itunes on the mac pro (where I have 500 gigs of music on one of the hard drives). i was told i dont have access to itunes media folder or a folder within it. to change permissions i should open the itunes media folder in the finder and change the permissions. i tried changing permissions (the box at the bottom of the info box), and had no luck.
if anyone can help me, i'd appreciate it.

You haven't been hacked, you just have problems with your system. What those problems might be I have no idea, as your posts are a bit rambling and unclear.
What I would recommend is to find a nearby Apple Store and take the time to bring your machine in to the Genius Bar there. (Make sure to make an appointment first!) You can do all this from the [Apple Retail Store page|http://www.apple.com/retail>. A Genius can look at the machine and help solve the problems. If your communication style and level of knowledge about computers makes it difficult to communicate with techs on the phone or internet, as it sounds like has been the case, this hands-on help could make all the difference.

Tiger on Mac Pro 3.1

Can i install Mac OS X Tiger on my Mac Pro?

Hi, normally Macs cannot run or use an OS earlier than they came with, as they do not include drivers for new hardware of that model, & your minimum OS is likely OSX 10.5.1 (9B2117)...
http://www.everymac.com/systems/apple/mac_pro/stats/mac-pro-eight-core-2.8-2008- specs.html

Can't reinstall Tiger 10.4.6

I previously upgraded from the original Panther 10.3 on my Power PC G4 with the Black retail upgrade disk with the large silver X (v10.4.6) that I purchased from Apple and everything was fine for 2 years. This month I installed a new internal ADA 320 Gb drive (properly using the correct jumper in the back) and installed Tiger on this drive using the install disk. Now I reformated the original drive (60Gb Mac OS EXtended) and can't for the life of me get the Install disk to reinstall Tiger on the reformated drive. It gets half way thru and freezes. The same thing occurs on my 500 GB external LaCie Drive (Firewire). I have tried to install using cutom and just the basic essentials to no avail. I would like to be able to have an alternate drive to start up from but so far have been frustrated. I even reinstalled the original Panther on these drives (performed easily and no problem) so that the Tiger Install disk can do an archieve and install but alas to no avail. Anybody have any suggestions as to what's wrong with my Tiger Install Disk.

It sounds to me like it could be the disc, or it could be the optical drive. You have to reduce the equation to one unknown by using a different drive or different disc to see which one (if either) it is.
Another way to get the OS onto that drive is to do a complete bootable backup clone. Of course this won't be as clean an OS as a fresh installation but will work until you have the issue sorted out.
Cloning And Backup Tools
A bootable clone is an exact copy of your drive which is capable of booting your computer. Making a copy of your computer which is capable of actually starting the computer requires special copying procedures. Some people just back up data files but if you have problems you have to reinstall all your operating system and all your applications. With a bootable clone you just start up from the backup drive and clone back everything.
To copy files from one hard drive to another hard drive you can use:
[CarbonCopy Cloner|http://www.bombich.com/software/ccc.html] (donationware)
[SuperDuper|http://www.shirt-pocket.com/SuperDuper/SuperDuperDescription.html] (shareware)
[IBackup|http://www.grapefruit.ch/iBackup/index.html] (free)
The Restore function of Disk Utility included in OS X. [Kappy's directions|http://discussions.apple.com/message.jspa?messageID=8799711#8799711]
[Tri-Backup (commercial)|http://www.tri-edre.com/english/tribackup.html] (payware)
[Silverkeeper|http://www.lacie.com/silverkeeper> (free) - version 2 has some issues (references: [1|http://www.macintouch.com/readerreports/backup/index.html#d12jan2009],
[2|http://www.macintouch.com/readerreports/backup/index.html#d13jan2009]) and it is recommended Tiger users stick with 1.1.4.
[Kappy's Backup Software Recommendations|http://discussions.apple.com/message.jspa?messageID=9065665#906 5665]
[Overview of Mac OS X Backup Programs|http://8help.osu.edu/1247.html]

Reinstalling osx on mac pro

Hi All
I have a mac pro 2010 runnning windows on bootcamp.I did this when my osx went bizerk
a few months back and each time i try to reinstall the software with the original disk that
came with it 10.6 it says the software cannot be installed on the computer.This is due to the
update i got about last year this time at apple into osx 10.7 so Id like to find out how i can
reinstall my operating system with either the original disk that came or with any other method.
I will be going to see the geniuses at apple over the weekend if i cant get it done online.
much appreciated
the punk!

On a Mac running v10.7 Lion, you need to use OS X Recovery
Restart your Mac while holding down the Command + R keys.
On a Mac that's been upgraded from an older OS X to v10.7 Lion, the install discs that came with your Mac cannot be used to reinstall the system.

How many hard drives can i install in my mac pro

How do I know what size hard drives I can install? I currently have 4 x 2TB drives installed and am looking to go bigger. 4 x 4TB would be ideal and if you have suggestions on which drives might give me best performance for HD video editing that would be nice too.
Also can I install more RAM?
ere is some information to help.
Mac Pro
Early 2008
Processor 2 x 2.8 GHz Quad-Core Intel Xeon
Memory 16 GB 800 MHz DDR2 FB-DIMM
Graphics 2 x NVIDIA GeForce GT 120 512 MB
Software Mac OS X Lion 10.7.3 (11D50b)
Model Name:          Mac Pro
Model Identifier:          MacPro3,1
Processor Name:          Quad-Core Intel Xeon
Processor Speed:          2.8 GHz
Number of Processors:          2
Total Number of Cores:          8
L2 Cache (per Processor):          12 MB
Memory:          16 GB
Bus Speed:          1.6 GHz
Boot ROM Version:          MP31.006C.B05
SMC Version (system):          1.25f4
Serial Number (system):          G************
Hardware UUID:          47DF4954-C493-50B8-85F3-FC381FA75AD6

PCIe SSD controller
www.macperformanceguide.com
That would be $1600 for your 16TB
There are kits to put 2.5" drives (4) in lower optical drive bay. Some WD 10K VR 500GB and 1TB ($200 and $300, 200MB/sec)
32GB 8 x 4GB FBDIMM 800MHz
GTX 570 w/ 10.7.3 from MacVidCards

Can't reinstall Tiger on Mac Pro

Similar Messages

Maybe you are looking for