Can't reload my notebook without loosing the electricity.

I have a HP Computer, bought in summer 2010. Have never had any problems but this summer the charger (and the battery) started sounding like a "hissing". Read about it http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00065262&tmp_task=solveCategory&cc=us&dlc=en&lc... and according to HP this is quite normal.
But yesterday when I was charging the notebook suddenly the electricity/power in the room went out. Tried to charge it in another room, same thing happened. My question is: should I replace the charger or the battery?

Hi,
It is by design. Windows Client operating systems only support one active session, no matter what you use the same user account or different user accounts to log on the machine.
When you use a different user account to remote access to the machine, Windows will prompt the user who already signed in to accept or decline you access. If the user accepts
the request, you will be able to logon and the user’s session will be disconnected. If he declines, you will not able to access.
However, when you use the same user account, the original session will be replaced by your session.
Thanks.
Jeremy Wu
TechNet Community Support

Similar Messages

Can I uninstall mountain lion without loosing the content on my hard drive?

I hae just installed mountain lion and now I can not use my Adobe programs - note saying it can not run power PC programs. I am on a deadline and I MUST get back to the files I was working on before I did this.
I need to know if I can unistall without loosing all the files I was working on before.

Hi Cate,
Like John says , it is better to upgrade to latest Adobe as they are 64Bit based so they would perform much better on your Mac.
It can make proper use of your RAMS and graphic card.
good luck..

I have all my music on an external media drive that has crashed. How can I get the music of my ipod touch back onto the comupter without loosing the music when it syncs?

I have all my music on an external media drive that has crashed. How can I get the music of my ipod touch back onto the comupter without loosing the music when it syncs. in order to start rebuilding my music collection?

You should be able to recover the media with the tips in this post from forum regular Zevoneer but I'm not sure what the implications are for your application settings. You can probably transfer your purchases into a newly authorised library, backup the device, recover any other media using third party tools, then restore the device from the backup. That should switch the assocation of the device to the new library but it is not something I've personally tested.
When you get it all working, make a backup!
tt2

How can i format my external hard drive to write files from Mac without loosing the files that i alredy have on my external hard when i used it with windows?

How can i format my external hard drive to write files from Mac without loosing the files that i alredy have on my external hard when i used it with windows?
I have been using Windows to write files to my 1TB WD external hard drive and I do not want to format to loose the files capacity of around 500GB
Someone, Please help

Hi Allen,
Is there any way to store the back up to Mac and restore after formating?

I can't put my windows xp to standby without loosing the connection...

So I can't put the windows xp machine in standby mode without loosing the internet connection. According to my LAC icon I still have a connection and if I "repair" it, it says it can but still no joy. It will work just fine after I restart the comp but that kind of destroys the whole idea of standby mode (having a saved session and all). This never happened before I installed the airport.

So, I think I've solved all my issues with the airport and my xp machine.
I did some other research and found that there might have been a issue with my zone alarm firewall and the airport. I turned it off and everything has been working good all day. I turned it on and I was back to my comp not recognizing the airport and no connectivity when I went to sleep mode and came back.
If you're running zone alarm and are having these kinds of issues.
Try and turn off ZA, if that solves the issue, turn ZA back on and go to:
Zone Alarm > Firewall (on the left side) > Zones tab (top right)> ADD (bottom right) > Host Site (top of popup menu).
When the dialog comes up, make sure the "zone" is "trusted, type in the name of your aiport (ie; house, my airport, what ever you named it when you set it up, if unsure, start the aiport from the start menu and see what it says), under "description I just put "airport router".
Then the "lookup" button comes into focus and you press it. It will find the ip address press "ok" and that is it!
BTW- My XP firewall is off.
So far so good for me. Maybe this weekend I'll see if I can get the external HD to work....(crosses fingers and knocks on wood).

How can i copy a playlist from itunes to a mp4 player without loosing the order of the tracks in the playlist?

Hello again,
I'm having problems transfering the playlists i've created from itunes to a mp4 player. It's not an ipod, and everytime i try to do this operation, the songs show up not by the order in the playlist but by alphabetical order. Is there any way to copy the playlist without loosing the order of the songs and directly, - i mean, without having to copy song by song to a folder in the mp4 player -, like it happens with the ipod? If so, how?
Thank you for your time.

I would consult the documentation of the mp4 player then.
B-rock

Can I uninstall and install without loosing play lists

Can I uninstall and install without loosing play lists

Your iTunes folder (normally under ~/Music/iTunes) contains files that tell iTunes what you have in your library, playlists, genres, ...These database files have extensions of .itl and .xml. Deeper in the iTunes folder you have the actual media (movies, songs, tv shows).
Uninstalling iTunes and then reinstalling iTunes should not impact your iTunes library. It will change iTunes settings like window size, if you have the sidebar turned on, and the like. I do recommend you have a backup of your iTunes folder but at least save copies of your .itl and .xml files.
Your question is a bit cryptic so I'm guessing at your actual question. Good luck.

How do I sync my iphone to a new mac without loosing the original data

How do I sync my iphone to a new mac without loosing the app data?

You must first sync the iPhone with the old Mac as you normally do, then move the entire iTunes Library from the old Mac to the new one.
An iPhone can only be synced with one computer at a time. When you first sync the iPhone with the new Mac, you will "erase and sync". This will erase the entire phone first, then sync it with the content you moved from the old Mac.
This explains the procedure: iTunes: How to move your music from one computer to another

HT4993 I have a disabled iphone i forgot my passcode, how can i get it unlocked without loosing my data?

I have a disabled iphone i forgot my passcode, how can i get it unlocked without loosing my data?

As the manual says, you will have to restore your iphone.

I have three iPads and one iPod and one iPhone. How can I message between them without sending the message to all of them. You send the message to your email address but all of them are set up und one account.

I have three iPads and one iPod and one iPhone. How can I message between them without sending the message to all of them. You send the message to your email address but all of them are set up under one account.

You can have a different receiving email in the Messages app on each device : Settings > Messages > Receive At . I'm not sure that there is a different way to have the message only go to one device.

My wife and I share an iCloud account for photo library and iCloud drive mainly for our family photo management, but we use different accounts for iMessage/facetime/calendar/etc. With Yosemite, I can't use continuity/handoff without dumping the photo

my wife and I share an iCloud account for photo library and iCloud drive mainly for our family photo management, but we use different accounts for iMessage/facetime/calendar/etc. With Yosemite, I can't use continuity/handoff without dumping the primary photo iCloud account and thus our shared photo system. We are running yosemite OS X 10.10 and iOS 8.0.2... Is there any way to do this?

my wife and I share an iCloud account for photo library and iCloud drive mainly for our family photo management, but we use different accounts for iMessage/facetime/calendar/etc. With Yosemite, I can't use continuity/handoff without dumping the primary photo iCloud account and thus our shared photo system. We are running yosemite OS X 10.10 and iOS 8.0.2... Is there any way to do this?

I want to download an audiobook, but my daughter has a giftcard credit on the account. How can I download my audiobook without using the money from her giftcard?

I want to download an audiobook, but my daughter has a gift card on the account. How can I download my audiobook without using the money from her gift card?

go directly to your ibook app. and you're going to find it. it's only with ibooks app.
best
Olivier
<Edited by Host>

Can I print a calander without showing the times of events?

Can I print a calander without showing the times of events. Or, alternatively, is there a way to list things without having them be an event. Just notes on the day, for instance.

It seems like a simple solution must be at hand. There is an option in the iCal Preferences (General) panel--Show event times. With this command unchecked the screen view of the month view is free of the times of day, but when I print the month view the times of day are printed.

Is there a (relatively simple) way to skip tracks with an iPod touch 5th gen using a physical button? I'm aware songs can be skipped on-screen without unlocking the iPod, but I'm looking for a method that doesn't require taking my eyes off the road.

Is there a (relatively simple) way to skip tracks with an iPod touch 5th gen using a physical button? I'm aware songs can be skipped on-screen without unlocking the iPod, but I'm looking for a method that doesn't require taking my eyes off the road while driving. For that reason, I'm also not interested in adding in headphones or additional devices that have the desired button functions. Going both forward and back would be great but I would be pleased just to have a "sight-free" way to go forward.
I've seen some mention here and there about ways to maybe change it so the volume buttons change tracks and holding the volume buttons changes the volume... but I don't know what's involved in that or if its even possible/recommended for a new 5th gen iPod. I think its a great device but its sadly lacking in music oriented functions and features... which is disappointing since music is why most people would bother getting one instead of some other "iDevice" :/

Given that you cannot do what you have asked for, perhaps you simply need to find another solution to your root problem.
Presumably, you want to skip to the next track because you don't want to hear the current one, and that is because...
You don't like it.
You've heard it recently and don't want to hear it now.
Simply don't want to hear it at this time.
For problem number 1. Don't put it on the iPod in the first place. (I know, obvious answer!)
For problem number 2. How about playing from a Smart Playlist (initially created in your iTunes Library) which has only songs you've not played recently?
For problem number 3. Hhhmmm! Create alternative Playlists for use in the car.
As for going back to the start of the "now playing" track.... Well, if your Playlist has only songs that you really, really want to hear, then you'll be looking forward to that rather go back to the beginning of the current song.
I'm not trying to be prescriptive, just giving you food for thought.
(They are all cheaper options than buying a car which can control the iPod from the steering wheel.)

Can I export a sequence without rerendering the entire thing again?

Using the latest FCP..
Im working on a project with some heavy boris effects stuff... SLOW SLOW rendering.. The entire sequence is already rendered.. but when I go to export the sequence as a QT movies.. using the current settings.. it wants to rerender the **** thing.. 4+ hours.. instead of just spitting out a QT built with the ALREADY rendered sequences.. The timeline is 1080i XDCAM. The sequences is only 5 minutes long.. So it should export in a matter of minutes if it didnt want to RERENDER EVERYTHING..
This is killing me right now..
Can I export a sequence without rerendering the entire thing again?

Joe
Lets start at the bottom and work back ....
What is your target format? You want to export the sequence but for what purpose? Is it for broadcast delivery, for burning to DVD, for web, or ....?
You note that the timeline is 1080i XDCAM ... well that is a native Long GOP format. When you export it as a single self contained clip then all those GOP structures that make up the different elements of your sequenvce must be broken down and re-conformed into a singole semaless GOP structure that describes the whole. Thats why it is re-rendering.
And GOP's are a hog to decode and encode ... thats why you're seeing such SLOW SLOW rendering.
Suggestion number 1) Set your sequence's Render codec to ProRes 422 ... th erender files will be bigger but they rendering itself will be much faster.
Suggestion number 2) If you are not exporting back to XDCAM media specifically then there is no real reason to export your edit as XDCAM HD. Try exporting as ProRes 422 (as per the render setting) ie choose Export > Quicktime Movie w/ Setting: Apple ProRes 422 (+not Current Settings+)
Suggestion number 3) If you are working on a big and powerful mac like the latest and greatest MacPro's, then in future just set your sequence codec to ProRes 422 and edit the XDCAM files directly in that ProRes 422 timeline, when done then Export > Quicktime Movie w/ Current Settings
Hope thats helpful
Andy

Can't reload my notebook without loosing the electricity.

Similar Messages

Maybe you are looking for