Can't remove black background of camera flare in tech blue HD...

I am modifying a template in Motion for the opening of an Industrial Video for a client.
I have isolated the lens flare and the lens flare rectangle, but cannot seem to export without the seemingly built in black background.
Can anyone tell me how to export the lens flare minus the black background, or where I can get or how I can create a lens flare on my own.
This is an emergency, any help would be appreciated.
Regards,
SMGHD

I did it and the background remains black. I either must be doing something wrong, or there is an inherent flaw in this program.
Do you know where else I may be able to search/create a lens flare that will export without a black background??
In any case, thank you for your help.
Regards,
SMGHD

Similar Messages

How can I remove the background sound from the headphone jack for my MacBoo

for my MacBook Air problem adding music intensifier (Panasonic ST-HT1000) to give it an unpleasant sound background that sounds like a whiz, it's not so loud, but it is an unpleasant .. after a short time can get used to, but the fizz does not pass, however, believe that it is a big problem.
Further I notice that when MacBookAir disconnected from the charger, it remains quieter sound.
At first thought that the headphone jack (3.5 mm Headphone:
Connection: 1/8-Inch Jack) or wiere have problem, but tried 3 different cables, but that does change enything, the problem remains.
When I added iPhonu3GS playing - the background sound were not, then everything is OK!
How can I remove the background sound from the headphone jack for my MacBook Air 13?

There is no way to bring that up unless you have it typed in a document. You can use My Support Profile to find a list of serial numbers that have been purchased or registered with your Apple ID.
http://support.apple.com/kb/HT2526?viewlocale=en_US
17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD  240G Vertex 3 SSD Boot HD 

How to remove black background?

Hi,
How to remove black and gray background found in the attachment(1 page). Thanks.

You can't do it with Acrobat alone. You could if you had Pit Stop or something similar.
If you have Illustrator you could probably open it and remove it there but you'd probably end up getting font substitution if you don't have the same fonts on you system.

How can I remove photos from my camera roll without deleting them from an album?

I have some photos in an album and also copies on my camera roll in. photos on my ipad2. I want to remove/delete from the camera roll without deleting them from the album. As far as I can see, when selected from the camera roll for deletion I am asked if I want to remove the photos from all locations - with no other options??
Thank you for your help
ian

Which iOS version are you using?
Are you also using iCloud?

Can't get black background in Print project

I am using the print feature in iPhoto '08 to print a batch of photos to PDF - one photo per PDF page. The intent is to use the pdf file to give a slideshow presentation that is hosted on a Windows machine - hence pdf. This works fine.
But when I try to select a black background in the Customize window for the pages, the background still shows as white, which in turn will give a white border on all the eventually projected pictures which isn't desirable. If this isn't the right way to get the background of the pdf pages all-black, what is?
Thanks.

OK, further update.
The white border inside the black border that Print Project adds seems to be actually part of the original photo, and only occurs where the "photo" was created by )e.g.) PowerPoint - I can fix that in the original.
But outside the black border (if black is the color I select in iPhoto print) there is still a white collar which will show up when I project the picture, and I can't find a way to get rid of that. In addition, the black border crops the photos, which sometimes cuts off a bit I might want.
I seem to have experimented with all of the features in iPhoto print that seem to be relevant, and can't go any further.
Any thoughts out there?

Can I change black background to read it better?

With Safari can a website that has black background and white printing be changed to white background with black print on my screen so I can read it easier?

Elaine,
The key combination should work unless you have setup a conflicting keyboard shortcut. Try this.
First press and hold down control, then press and hold option, continue and hold down the command (apple key), and then press the number 8 below the function keys. Your screen should invert. Make sure that you don't have num lock on (this will often cause a problem). Also make sure you are using the normal keyboard row 8 (the one above the U and I keys), and not the number pad.
Toggling the setting to white on black is the same as the keyboard combination (it even moves the radio button).
You can also try using option + command + 8 (zoom on) and option + command + = (zoom in) to magnify the text.
Good Luck,
-j

How can I access black background in Airtight Simpleviewer in LR3?

Airtight Simpleviewer indicates it is using black background
but I only get a charcoal gray. Have tried custom color and
the color picker. Had this problem in LR3 beta. Hoped it would
be fixed. Flash Gallery using black background shows up just fine.
Any solution?

Preview in your browser. The background displays
your choice. I think it might be a bug
since the other two items(border and lettering) are visible.
Rich.

Removing black background-(looking for transparency on title stuff)

final cut studio Guru's....specifically "live type" pro's.
Tried everything in the manual & more...still, no do workee.
Have other footage to run behind title stuff. White text...
Short blue fx line....I'm listening to Howard Beale and
I'm about to scream outa' my window...for my neighbor's sake, a little help?
Gracias,
g. tirebiter
mac G-5 Mac OS X (10.4.7) final cut studio
mac G-5 Mac OS X (10.4.7) final cut studio

OC, explain a bit more- because what David explained
is correct. If you export from livetype without
rendering the background, then the background is
actually transparent.
My assumption here is that after you do this, you are
watching the quicktime file that pops up in live type
after it renders- and it has a black background.
This is normal, but actually transparency is there.
Import the QT file into final cut and throw it on a
v2 track above another video image. You will notice
that there actually is a transparent background in
FCP...
If you have already done this and you are still
seeing black, my next question would be what format
are you editing in? DV?
good morning geniuses......
Rocky Rococo at your cervix...THAT WAS IT! I am the "slime"
from the vi-deo....a little footage and Wha-Law! my hours of fear & self loathing are over...why is it always the obvious starin' ya' in the face that fixes th' problem...
THANK YOU to all of you who took the time to respond this
early A.M....David & eventually ENZO helped me pull my head out... here in the O.C. (but to all who responded...may th' good lord take a likin' to ya'....)
I'll never make this particular mistake again...why? when there's so many more to gnash my teeth about...
drive fast...play hard, compadres!
george tirebiter
mac G-5 Mac OS X (10.4.7) final cut studio

How can I remove the background behind my selected graphic?

I have a logo that has a rectangular background behind it; I want just the logo itself. How do I get the odd shaped logo only off the rectangle? This was not created with AI, I don't know what program was used. I can't just ungroup.
I am learning this by trial and error, please - a simple explanation for my non professional ears.
Thanks!

Monika Gause wrote:
Wade_Zimmerman wrote:
In a case like this just hiring a pro is not enough.
sorry, I have to disagree.
Handing the graphic stuff to a pro works for so many clients. Why shouldn't it work in this case? There is no simple alternative available. It's just not possible to explain this in a few newbie-compliant words and there is no simple method to get the desired solution (a logo without a white background - or whatever color it may be).
Because you did not read what I wrote and decided to interpret it based on the one phrase.
This user or would be users has no background in computer generated art and perhaps non in the preparation of art in genera for reproduction.
Hiring a pro in itself will not make for a great result and there is a good chance not even a professional resul.
The reason is that they themselves do no understand the requirements and probably put the kind of restrictions on the Pro to do things that will make for failure.
They need some education and some know how to relate to what the pro is doing for them.
It would be different if they had a professional or experience person to mentor them on the client side but they do not seem to.
I wrote they had to do three things in order to get some form of knowledge so they can work with a pro.
The OP states hey do not even understand the meaning of some of our words and phrases and so they first need to gain the some understanding of what is gong on or they will be in a panic at every turn.
I would even venture to say that you have never worked successfully with a client that ha no understand about what you are required to do, I am not say the OP has to be an expert they do have to be able to communicate with a pro.
The OP has to know what the pro is telling them what they are doing for them etc.
If you have ever been in the position of working with some one totally unfamilar with the task at hand then you would understand what I mean.
I once had a client who told me he could actually take the photographs better then I can if I would just show him the button on the camera that made the photos look good, so I pointed to the shutter release, he accused me of lying saying I was not showing him the secret button that professionals use.
He actually found a way he tells everyone that he took the photos I took that day.
So unless the OP has a good basic knowledge they cannot make rational decisions as is the case here.
to the OP I am not accusing you of being like my client but you do need some understand of what your designer would be talking about andkeep in mind that Ilustrator is not that easy to learn even if it looks like it would be.

Help on removing black background from pre-keyed footage - tried everything, won't work, help!

Hi there,
I have Adobe Premiere Pro CS6, and up until now, I've had no problem working with pre-keyed footage. I usually place the footage into my timeline, and then would choose a blending mode such as "screen" or "multiply" to erase the black or white background. Except this time, nothing works! I've tried importing different footage, worked with opacity levels, and tried updating all my Adobe applications, downloaded Quicktime 7, etc. etc.
I am still somewhat amateur to all of Premiere Pro, but up until now, I've had an easy time with everything. Any help you can give would be appreciated!
Thanks,
Gabrielle

Hi all,
Well, I figured out what I was doing wrong. It is extremely embarrassing to admit this, but I was only looking at the footage itself I wanted to change. When i placed it over the other footage, it wasn't blocking it out anymore like it was before (if that makes any sense, I hope it does). Anyway, the blending modes worked perfectly, and I am almost done now with my simple project. I'm going to save your answers, though, because I know I will need to refer to this in the future.
Thanks all, for your help and patience,
Gabrielle

Can one remove the lock screen camera icon and function in iOS 5.1.1

I recently updated my iPod touch to 5.1.1 to see what the later iOS was like, and I really dislike the camera icon on the lock screen. I can't seem to find a way of removing it, and using restrictions as was suggested elsewhere disables the camera all-together. I'm not liking the 5.1.1 experience and am considering going back to 4.1.2.

It cannot be removed as you have discovered. Sorry.
B-rock

Can I change black background in preview window?

I have Bridge CS3. I have alot of movie files that have black moving objects with transparent background. Since the thumbnail and previoew windows in Bridge degault to black for transparent areas, I cannot view these files in Bridge. Is there any way to change the default black color for transparency?
Thanks.

Thanks I had tried that but that only changes the background color or color around the images. It doesn't change the actual background color used for the thumbnails or the previoew window. So if you have a video with some transparency, that transparency shows as black. That is the color I was looking to change.

How can I remove black frames on both sides of the clip?

Here you can the see the frames on both sides of the picture. They remain the whole video and I want to remove them.

Start by being sure that your project matches your video
Importing Video http://forums.adobe.com/thread/1065281
-and project settings http://forums.adobe.com/thread/1112086

Can't remove black bars when converting

I have seen numerous threads talking about Adobe Media Encoder producing black bars when converting videos. Some are saying it's a bug w/ CS4, others are saying its something to do w/ non-square pixels. I really don't know, and I really don't understand most of it, sorry.
My dilema is, I have some .mov files created in Final Cut Pro with a 4:3 aspect in NTSC. I need to convert them to .flv so I can stream them on a website. My current settings are:
FLV - Web Large, PAL Source (I'm using PAL because it seemed to create a better quality video when I was streaming)
Export Video
Export Audio
On2 Codec
Resize Video (786x576)
Frame Rate - 15
Bitrate encoding - CBR
Encoding Pass - One
Bitrate - 1,500kbps
Undershoot (%Target) - 90
Quality - Best
When I export the files and try to play them in a web flash player (480x400) I get black bars on the top and bottom. I don't really have a lot of experience doing video editing so I'm shooting in the dark here. I have adjusted a lot of the pre-mentioned settings but still no luck. Help me out please!

Ok, it will take a minute to figure out how to do that....haha. (This is my first time using the software, can you tell?)
Meanwhile, take a look at these screenshots. The output preview appears to show it will still produce the black bars. Although I'm not sure if I want to trust it because there are times it appears to show it WONT produce black bars and yet it still does...

How can I remove black lines in Zen V Plus? Can you tell me why is there o

It's very annoying and there are more and more!Why is there one?Why should I update firmware?Why should I update?How could I update?It's so annoying!!!!!Message Edited by 2004254 on -24-200607:06 AM

Can you be more specific? What player do you have? Are the black lines on the screen?
Try updating the firmware first, if that doesn't help it may be best to contact Customer Support for assistance.
Cat

Can't remove black background of camera flare in tech blue HD...

Similar Messages

Maybe you are looking for