Can't remove images from camera canon t4i

Hello, I have removed plenty of images in the past. My last set of images rolled over img_9999.cr2. When I plug the camera into the pc I can see all the images up to img_9999.cr2 and get them off the camera. I can see images after that on the camera, but not when plugged into the pc. I thought the numbers would roll over to img_0001.cr2. Also new photos taken are not recoverable. Thanks,Glenn

ebiggs1 wrote:
Glenn,I strongly recommend you don't use a large SD card. Instead use several smaller ones. I used to use only 8GB but now I mostly use 16GB. Just because they got so cheap.But keeping a lot of photos on one huge 32GB or 64GB is asking for trouble. All my shots are put on the computer after every shoot or outing. You only have to loose a once in a life time image to get into this habit. At least u/l them to your computer everytime if you see a benefit in keeping large numbers of files on the camera's SD card. Of course if you shoot video this doesn't apply and you want a big SD card. If you upload your image files to a computer after every day's shooting, and if your workflow includes a prompt, well organized backup of the computer, you have nothing to fear from using a large memory card.

Similar Messages

Is there any way I can view / remove pictures from Camera Roll on the iPhone, on a Mac, without actually importing the files?

Is there any way I can view / remove pictures from Camera Roll on the iPhone, on a Mac, without actually importing the files? I just want to view / delete files without importing them.
For instance I have 1200 photos on my iPhone Camera Roll. Some of these are shots, that I've taken multiple times, some good, some bad. I just want to clean up my Camera Roll, but going through the pictures on the iPhone's small screen is tedious. I'd much rather look at the camera roll's photo's on my Mac, and then decide which files I'd like to keep, and which to delete.
I don't want to import the files, as when I import the files, and delete them from Camera Roll, now the Photo's are not on my phone, and the only way to get them back on my Phone is to Import them back in using iTunes, and then they go into the Picture Library and not the Camera Roll.
In the same way as I can view Pics from my digital camera's SD card on a Mac without having to actually copy them to my computer, is there any app out there that will let me view my iPhone pics without importing them.

gsharp01 wrote:
Is there any way I can view / remove pictures from Camera Roll on the iPhone, on a Mac, without actually importing the files? I just want to view / delete files without importing them.
The short answer is yes.
Connect your iPhone to your computer.
Open Image Capture application.
Click on the 4 little squares at bottom to view them as photos, not a list.
Select the photos them click the No Entry icon at bottom to delete.

Remove images from camera album when in a folder

I created a images folder (in the photos app) and transferred some of my pictures there. How can I remove those pictures from my main camera roll without removing it from the folder?
Note: I am using a iPhone 3GS with iOS 5.

You can't.

Can not get images from camera roll in Iphone into Itunes

When I sync my iPhone with iTunes then sync it as normal, but it is not just the pictures located on Kamara roll in over the iPhone with iTunes. It tends to make it otherwise, what can I do?

Camera roll photos are not synced at all.
You need to import them as you would import pics from any digital camera:
http://manuals.info.apple.com/enUS/iPhone_UserGuide.pdf

I can't see previews of RAW images from a Canon PowerShot G16 in Lightroom 4

I can't see previews of RAW images from a Canon PowerShot G16 in Lightroom 4?

For that camera, you need at least Lightroom 5.2. The alternative would be to use the DNG converter, version 8.2 or later. Or, you can upgrade to Lightroom 5.

How can I best load RAW images from a Canon SX50?

How can I best load RAW images from a Canon SX50?

9Sorry, ........confused about this process. When I attempted to Post the question I had entered, I was told a blank space could not be posted. So, I reentered the Q in the "space"........ which apparently was the space for an answer....!! ??......)
> When I try to load RAW images taken by my Canon SX50 from the SD card, iPhoto 11 - (iMac/OSX 10.6.8) tells me that it can't read the format or something like that. OSX 10.6.8 came out before the SX50, thus, did not include the related program. I want to shoot RAW on the SX50....... but I then want to load them into iPhoto....... which I do directly from pics I take with my Nikon D200.
Not sure if this will help.............

I need to select to import only low-res jpeg images from my Canon 5D Mk11 camera to an iPad 2 and not RAW images

I need to select somehow to import only jpeg images from my Canon 5D Mk11 camera to an iPad 2
I take photographs in both RAW (high quality up to 30Mb file size) and JPEG low quality for use on iPad and Internet. The Raw files I save to a 1Tb Multimedia Storage Viewer and later down load-them to my computer where I process them for high quality prints.
Using the Camera Kit I can’t find an option to only download jpeg images, and fill the iPad memory with unwanted RAW images. Can you please tell me how to get over this problem?

Have you checked your "Import" settings for "Raw&Jpeg" pairs in the "Import" panel?
You can set Aperture to import raw, jpeg, or raw&jpeg.
If you imported Raw&Jpeg, but have set Aperture to use the Jpeg as original, you will see the imported image as Jpeg image, not as a raw image, even if the raw has also been imported. You can switch between Raw and Jpeg originals for selected images from the Photos menu:
Photos > Use Raw as original.
Regards
Léonie

Photos won't import images from my Canon camera. When connected, program sees the images, tells me it will import the new ones, then freezes once import starts, not allowing any other operation to happen. MacbookPro 15" 2012, OSX Yosemite 10.10.3.

Photos won't import images from my Canon camera. When connected, program sees the images, tells me it will import the new ones, then freezes once import starts, not allowing any other operation to happen. MacbookPro 15" 2012, OSX Yosemite 10.10.3. Any suggestions?

Solution discovered. Faulty connector cable. Tried a different one and it worked.

How can I download video from a Canon ZR30 video camera to my IMac. I bought Elgato Video Capture, but the connections do not match. There is no white female end in the camera. Also, the red and yellow connections are loose at the camera end.

How can I download video from a Canon ZR30 video camera to my IMac? I have Elgato Video Capture, but the provided connectors are loose in the camera and the camera does not have a white female end. No signal shows up on the computer when I connect the red and yellow connectors.

Broken solder joints on the camera me thinks!!
sorry

Why can't I import raw images from camera to lightroom 5.7.1?

why can't I import raw images from camera to lightroom 5.7.1?

You can visit the Lightroom Journal to see the new features of LR6/CC, including new cameras supported in this release:
Lightroom Journal | Tips and advice straight from the Lightroom team.
And yes, as DJ confirmed, the Nikon D7200 is listed.
The the full list of supported cameras is here (Lightroom and Camera Raw have compatible engines and identical support):
Camera Raw plug-in | Supported cameras
Mike

How can I remove pictures from my IPad

How can I remove photos from my IPad

Depends on where these photos came from. If they were synced from a computer, you'll need to sync them off by unchecking the folder the pictures are in from iTunes on the computer.
If they were taken by the iPad or downloaded you should have a little trashcan icon at the top of the screen you can use when viewing the image.

Error message when donloading images from camera....?!?!?

I have been trying to import images from my Canon Rebel digital camera and am having some issues. I was having trouble with iPhoto which is why I purchased this great program. At first, the images were downloading fast and furious with Aperture but now I am having some of the same issues that I was having with iPhoto. It is taking forever and a day to import my RAW images and now I am getting an error message with almost all of my photos. It stalls out on them (and the red light stops flashing on my camera as if they aren't communicating) and then I get the message that there was "a problem downloading that image" and this error code: (ICA download error -609).
This is extremely frustrating!! HELP!
iMac Mac OS X (10.4.6)
iMac Mac OS X (10.4.6)

You're loading straight off the camera?
Be sure the camera isn't shutting itself off in the middle of the transfer. It may auto-turn-off after a minute.
I'd really suggest you use a card reader. You can get a USB2 CF reader which will be 10x faster than direct camera download for like $20. I can't fathom why anyone would use direct-from-camera in lieu of a reader, unless they were doing tethered shooting.

Help, bridge will not convert the images from my Canon 7D into raw

Has anyone else had problems converting images from a Canon 7D into Raw format? Bridge downloads them and then tells me it could not convert them. Hopefully someone out there has a fix. Aah the joys of new equipment and software.
EW

Bridge should be converting image FROM raw format, not TO raw format.
If you have Photoshop CS4 you should update to the latest Camera RAW plugin:
http://www.adobe.com/downloads/updates/
If you have an earlier version of Photoshop (CS, CS2, CS3) then you can download the latest free DNG Converter and convert the 7D RAWs to DNGs and then an older version of Camera RAW can open them.
http://www.adobe.com/support/downloads/product.jsp?product=106&platform=Windows
CS5 will be announced in a few weeks/months, and when it is available there will only be an upgrade path from CS2, CS3 and CS4, so if you have PS CS then you need to upgrade to CS4, now, before CS4 is available, otherwise to upgrade to CS5 you will need to pay full price.
If you have a PS version newer than CS then you can wait and upgrade to CS5 when it is out.
With either CS4 (and the newest Camera RAW update) and CS5, you won't have to convert 7D RAWs to DNGs to work on them.

Camera software not opening to transfer images from camera to computer. What to do?

My PowerShot 720is software ZoomBrowser EX not opening on computer. No images load and I don't have option to click on "connect to camera" so I can transfer images from camera to computer. Message says "Zb Module has stopped working. Windows is looking for a solution to this problem." Anyone have this happen and know what to do?
Thank you!

Hi BLG,
If you haven't already done so, please update your software for Windows 7. Here's how.
Just click here to access the software updates for your camera. Once there, just enter your operating system, then the version of the operating system. Now click on "Software" to show the software updates.
Click on "ZoomBrowser EX 6.9.0a Updater". Installation instructions are on the next page. Also, please download "CameraWindow "DC 8.8 for Windows" to your desktop.
After accepting the required disclaimer, please download the program update to your desktop.
After downloading all the software you choose to install, please install ZoomBrowser last. This will allow it to link to the other Canon software on your computer.
Since you've installed an older version of software, you may now double-click on the program update to install it. If not, just put the CD-ROM in your computer's optical drive and stop any installation program that starts.
If you've already updated the software for Windows 7, please contact us for assistance. Click here for contact options.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

I'm unable to download RAW images from my Canon Rebel T2i to my flash drives. JPEGS are fine. WHY?

Suddenly I'm unable to download my RAW images from my Canon Rebel T2i to my flash drives when just a few weeks ago I was able to. What happened? I can download JPEGS just fine. No error codes, software works like normal, i see the previews and when i go to my flash drives to open the files the dated file is there but it opens with no images. I've reformatted the memory card twice now, so that's not the problem. Any ideas from all my new friends out there. Thank you.

We may need more info. What are your flash drives? What are you using to copy? What computer/OS do you use?
Normally a file is a file... a computer doesn't care what type of file it is. Whether or not any software knows how to hope the file wont impact the computer's ability to copy it. This makes me wonder if it is being copied, but can't be opened (e.g. if the software you are using doesn't know how to deal with a Canon T2i RAW file (.CR2).
RAW is more of a "concept" than a "standard". Every camera model's RAW file will be slightly different. If you want to open an image in, say, Photoshop... they provide "Adobe Camera RAW" updates for their software and you'd need the update that supports your T2i (btw, when Adobe releases a "new" version of software, they tend to stop providing RAW updates for all previous versions of that software. So depending on what version of software you use... the only way to get it to work with RAW may involve having to upgrade the software (there are some cumbersome work-arounds.))
Tim Campbell
5D II, 5D III, 60Da

Can't remove images from camera canon t4i

Similar Messages

Maybe you are looking for