Can't rename audio clips using letters - only numbers

Hi There,
ALl of a sudden I can't rename audio files in the "Audio" tab - it only accepts numbers no letters.
Anyone else seen this?
Am running Motion 4.0.3 on 10.6.7
Any help would be much appreciated.
Cherrs
Ben

Um, buddy, you're typing in a time code field. You can only "reaname" in the Browser window.

Similar Messages

I purchased Elements 13 and everything downloaded great. When I go to license the software before use the code wont accept letters, only numbers. My serial number has both.

I can't use the software before a license it. I am on the page to type in the serial number and it won't take letters only numbers. This is very frustrating.

Hi John,
It seems you have got a redemption code. Try to follow the link mentioned below.
Redemption Code Help
https://helpx.adobe.com/x-productkb/global/find-serial-number-student-teacher.html
https://helpx.adobe.com/x-productkb/global/find-serial-number.html
Thanks,
Atul Saini

Installation: hello, I am trying to install my adobe elements twelve. I have a serial number, which contains no letters (only numbers), from the box. I use a mac. When I try to install it, it says it's unable to validate my serial number. I have already c

Installation: hello, I am trying to install my adobe elements twelve. I have a serial number, which contains no letters (only numbers), from the box. I use a mac. When I try to install it, it says it's unable to validate my serial number. I have already checked the spelling. What should I do?

Does it begin with 1057? If not, it's a redemption code. In which case, see here:
Redemption Code Help
If it is a serial number, go to system preferences>security & privacy>firewall>firewall options and be sure that PSE is allowed to call out.

Can you access the internet using wifi only on an iPhone 4?

How can you access the internet using WiFi only (no service) on an iPhone 4?

Assuming your connected to wifi - go to safari.

Trying to install Adobe Photodeluxe (elements 13) I have box and cd sleeve with serial number, But registration won't let me type letters only numbers allowed. Help please.

Trying to install Adobe Photodeluxe (elements 13) I have box and cd sleeve with serial number, But registration won't let me type letters only numbers allowed. Help please.

You possibly have a redemption code which has to be converted into a serial number.
https://helpx.adobe.com/x-productkb/global/find-serial-number.html

Can't Move Audio Clips in Timeline After Expanding to View Waveforms (Premiere Pro CC 2014.2)

So, this seems to be a bit of a weird one, and I'd be pretty stoked if it ended up being something silly that I'm doing wrong, but I can't for the life of me figure out what that might be.
As the title suggests, I can't use the mouse to move some audio clips in a timeline once I expand the track to view the waveforms. This appears to only happen with independent audio clips (WAV. AIFF, MP3, etc), and not with clips attached to video. Also, it's worth noting that I don't have track keyframes turned on. I was hoping that was it, but it wasn't.
So, what happens is this:
1) I drag an audio clip down to the timeline (I can drag it onto an existing track, or drag to the bottom of the sequence and create a new track. Neither option seems to get a different result.).
2) So long as the track isn't expanded and the waveform isn't visible, I can move the clip left, right, or up and down to a different track.
3) As soon as I expand the track to view the waveform this functionality goes out the window. When this issue happens I can use the keyboard to nudge left and right, but that's about all the movement I have.
4) It's almost as though the track becomes corrupt. The lanes for the track don't redraw properly, and the track is pretty much unusable. I can't put anything into it, and I can't take anything out. All I can do is delete the track and start again.
Complicating issues is that this doesn't always happen, but instead is one of those "vast majority of the time" issues. I can't see any rhyme or reason for why it works or doesn't. I seem to do the exact same thing, but occasionally get different results. It doesn't matter what type of file I'm using (WAV, AIFF, etc), and this only happens with independent audio clips.
Once again, I don't have track keyframing turned on when this happens. Believe me, I wish that was it.
I have already filed a couple of bug reports about this over the last month or so, but haven't heard anything yet. I was wondering if anyone else was having the same issue, and if so, whether they had any workarounds.
Mandatory system info:
Windows 7 Professional SP1 (64-Bit)
Intel i7-3820
32GB RAM
Nvidia GTX 980 (350.12)
Premiere Pro CC 2014.2

Update:
I was just looking to post a screenshot of the timeline when I discovered something interesting. As soon as I use the vertical scroll bar to the right of the sequence, the tracks start to work again. Close off the waveform and the clip goes haywire. Move the scroll bar a tiny bit (or a lot), and suddenly the clip starts working.
Pretty bizarre.
The good news is that for the time being that could be a workaround, though it would be great for this to not happen at all.

Can't Move Audio Clip

I need to shift and audio clip and I can't move it. There is a gray line a the top of the clip that does not appear on other clips, but I don't know what this means. I can shorten or lengthen the clip, but I can't move it. At the far right top is a button that indicates that I can speed up or slow down the clip and this button doesn't appear on the other clips. Occasionally a box pops up to let me say if this is a custom or a present and it currently is custom at 100 percent. The clip is highlighted in yellow, which would seem to indicate I can move it, but I can't. I'd appreciate help on how to fix this.
Thanks.

hmmm... It seems to be a new big problem, I'm having the same issue...
But with iMovie HD 6
I'm using Mavericks and I import a movie file into iMovie HD, then an audio file (I've tried mp3 and aiff) and both play, video and audio. Then I have to edit the audio file to sync with the video, and then is when iMovie HD freezes.
I've deleted the preferences (now iMovie opens only the menu, but the project doesn't appear at all, only that colourful loading icon forever ) I've repaired the permissions restarted every single time and still nothing...
IS THERE ANYONE TO help us out, please?
Rubia

Rename audio clips within merged clips

Hi there,
In premiere CS5.5, is it possible to rename the audio clips that are within a merged clips ?
I mean, with each video, I have several audio tracks from ambient and 2 booms.
In order not to mess up with those when editing sound in ProTools later, I need to know which one is which.
Thanks.

If you only want the sound clip for a set period of time, drag it on top of one of the video clips near the beginning that will prevent the audio from becoming a 'background music clip'. Grab the title bar of that clip in the Project window and drag it until the whole background area changes from purple/green to the normal dark grey color of the Project window. Same would apply to your voice clips as well, just drag those sound clips right on the very middle of the thumbnail image of the video clip, and then slide it around to where it needs to be by dragging it to the left or right.

Can you lengthen the clips used in Movie Trailers?

Hi I notice in the "Sports theme" movie trailer sample--it shows what appear to be 3-4 second clips of a kids soccer game. When I tried to do it, it seems the times are already pre-set, and at incredibly short flashes of time, like 1.07 seconds. It makes it too choppy for my tastes, but I couldn't figure out how to lengthen the shots. Given that the music ends when it ends---maybe there is no way to do this? Or maybe delete the number of scenes?
Thanks in advance for any feedback.

You cannot copy and paste it. You can copy and paste clips, but the titles, music, transitions, etc. will not copy over.
However, You can go to the Project Library List view and right click on the Project name of the trailer. Select DUPLICATE PROJECT. This will create a copy. Use this to start the complete movie.
Another way: Share your movie using SHARE/EXPORT USING QUICKTIME. Choose Apple INtermediate Codec. IMport this AIC movie back into iMovie as an Event, and you can drag the whole thing into a new project.

PLEASE NEED HELP! CAN'T COMBINE AUDIO CLIPS AS ONE FULL CLIP!

I am getting very frustrated! I have split two audio clips and want to join them together to create one audio clip (the audio is of the same song, just split) There is other audio before the clip that I split that I got rid of, so now I just have the one song as a full song combined together in imovie 6, but when I take it out of imovie it plays everything! including what I deleted!
so, is there a way I can transfer what I have in imovie 6 (which are two .wav files) and import it into itunes as an mp3 file?

I happened to come across this discussion in another forum. Maybe it would help you. Check it out:
http://discussions.apple.com/thread.jspa?messageID=6888437&#6888437
Good luck.

Can't drag audio clips onto timeline in PPro CC

It doesn't seem to be possible to drag an audio clip directly onto the timeline any more without first importing it into the project.
In CS6, I could drag an audio file like a .wav, mp3 or similar directly on to the timeline. CS6 would automatically add it to the project, it would be conformed, and its waveform would appear in the timeline.
In CC, it doesn't add it to the project, and instead it creates what appears to be just an empty placeholder in the timeline. There's no waveform, and no audio is heard when the sequence is played.
With CC, it seems you have to import it into the project first, then drag it onto the timeline, creating an unncessary extra step.
Also, if after importing that audio file into the project you then delete it, it doesn't get removed from the timeline, it just stays there.

Feature is still there, has not changed.
Try clearing your media cashe

Can't rename a file using File.renameTo(...)

Hi,
I have a servlet, RenameFile, that receives audio file via HTTP Post and writes it to /tmp/recording.0002002B-0C0022BB-0001.1.20050622.073208.wav. Then it creates directories under /alert_messages directory based on the timing parameters that it get. Finally, it renames /tmp/recording.0002002B-0C0022BB-0001.1.20050622.073208.wav to /alert_messages/2005/06/22/22/00/79_0_200506222200_001.WAV. RenameFile runs fine when it runs by itself (ONLY one Tomcat, jakarta-tomcat-4.1.30, is running). However, RenameFile fails to rename the /tmp/recording.0002002B-0C0022BB-0001.1.20050622.073208.wav to /alert_messages/2005/06/22/22/00/79_0_200506222200_001.WAV when it runs in a Linux box that jboss-3.2.1_tomcat-4.1.24 is also running. In this box, TWO versions of Tomcat are running at the same time. I set the /alert_messages directory with �chmod �R 777� and run jakarta-tomcat-4.1.30 as tomcat user. RenameFile fails the rename operation. But, it creates the /alert_messages/2005/06/22/22/00/ directories.
It seem like RenameFile can create directory but can�t create file in the /alert_messages directory when both version of tomcats are running at the same time.
Can it be due to both the jakarta-tomcat-4.1.30 and the jboss-3.2.1_tomcat-4.1.24 versions are running at the same time in one Linux box?
Can this be Jboss prevented the operation?
I did not receive any io exception!!!
Any help in this issue is greatly appreciated.
Debug listing from the RenameFile;
- originalFilename: recording.0002002B-0C0022BB-0001.1.20050622.073208.wav
- file.toString(): /tmp/recording.0002002B-0C0022BB-0001.1.20050622.073208.wav
- file.getName(): recording.0002002B-0C0022BB-0001.1.20050622.073208.wav
- file.length(): 122986
- file /alert_messages/2005/06/22/22/00/79_0_200506222200_001.WAV
- file NOT renamed /alert_messages/2005/06/22/22/00/79_0_200506222200_001.WAV
File Listing in the /tmp directory create by RenameFile;
-rw-r--r-- 1 tomcat tomcat 122986 Jun 22 07:33 recording.0002002B-0C0022BB-0001.1.20050622.073208.wav
Directoy Listing in the / directory with �ls �la�;
drwxrwxrwx 3 tomcat tomcat 4096 Jun 22 07:28 alert_messages
Directory created by the RenameFile with �ls -la /alert_messages/2005/06/22/22/00�;
drwxr-xr-x 2 tomcat tomcat 4096 Jun 22 07:33 .
drwxr-xr-x 3 tomcat tomcat 4096 Jun 22 07:33 ..
Out put from catalina.out;
!!!!! Can Read the old File !!!!!!!!!!!!!!!!!!!!
!!!!! Can Write the old File !!!!!!!!!!!!!!!!!!!!
!!!!! Can Not Read the new File !!!!!!!!!!!!!!!!!!!!
!!!!! Can Not Write the new File !!!!!!!!!!!!!!!!!!!!
!!!!! renameTo return false !!!!!!!!!!!!!!!!!!!!
Code That rename a file:
public synchronized String renameAlertMessageFile(String oldFileName,
                            String newFileName)
            throws SecurityException, NullPointerException
    File oldFile = null;
    File newFile = null;
    String result = null;
    StringBuffer myNewFileName = null;
    boolean renamed = false;
    try {
      int indexStringValue;
      int newFileLength;
      int indexOfPeriod;
      int indexOfLastUnderScore;
      int lengthOfExtension;
      boolean Contin = true;
      String sNumber = null;
      String indexString = null;
      myNewFileName = new StringBuffer(newFileName);
      oldFile = new File(oldFileName);
      newFile = new File(myNewFileName.toString());
      if (oldFile.canRead() == false) {
        System.out.println(" !!!!! Can Not Read the old File !!!!!!!!!!!!!!!!!!!!");
      } else {
        System.out.println(" !!!!! Can Read the old File !!!!!!!!!!!!!!!!!!!!");
      if (oldFile.canWrite() == false) {
        System.out.println(" !!!!! Can Not Write the old File !!!!!!!!!!!!!!!!!!!!");
      } else {
        System.out.println(" !!!!! Can Write the old File !!!!!!!!!!!!!!!!!!!!");
      if (newFile.canRead() == false) {
        System.out.println(" !!!!! Can Not Read the new File !!!!!!!!!!!!!!!!!!!!");
      } else {
        System.out.println(" !!!!! Can Read the new File !!!!!!!!!!!!!!!!!!!!");
      if (newFile.canWrite() == false) {
        System.out.println(" !!!!! Can Not Write the new File !!!!!!!!!!!!!!!!!!!!");
      } else {
        System.out.println(" !!!!! Can Write the new File !!!!!!!!!!!!!!!!!!!!");
      renamed = oldFile.renameTo(newFile);
      if (renamed == false) {
        System.out.println(" !!!!! renameTo return false !!!!!!!!!!!!!!!!!!!!");
    } catch (NullPointerException ex) {
      // Throw the same exception so that the caller may catch the
      //   exception and log the error
      System.out.println("NullPointerException For The New Dest File Name");
      ex.printStackTrace();
      throw ex;
    } catch (SecurityException seEx) {
      System.out.println("SecurityException For The New Dest File Name");
      seEx.printStackTrace();
      // Throw the same exception so that the caller may catch the
      //   exception and log the error
      throw seEx;
    } finally {
      if (renamed == true)
        return myNewFileName.toString();
      else
        return null;
} // End renameAlertMessageFile

Hi,
Thank you for replying to my message. The servlet has been running for me for the last 12 months. However, it was running by itself without the Jboss-tomcat running on the same box. Can this be the catalina.policy file in the jboss-tomcat version restricted the rename operation. We are not allowed to write file under the umbrella of J2EE. But the servlet did not run within Jboss-tomcat. This really gets me thinking that something is not working correctly. Perhaps tomcat did not has the permission to write on the /alert_messages directory, again it did created the subdirectories under the /alert_messages.
Any idea of what is going on?

Need help on how to a user can control a video clip using their mouse

I need help. I've got a video clip of a rotating 3D
object(left to right) and i would like the user to be able to
control the rotation of the object using their mouse. I've looked
everywhere and i'm at a lost. Can anyone help me
Here is a link to what i'm trying to achieve:
http://www.sun.com/servers/blades/6000/gallery/index.xml?p=1&s=2
I know they use Java but i'm sure this can be done in Flash.
Thanks
Ray

Here are the instructions...
Update firmware with DOS CD
To boot from CD you have to hold down the option key (<alt>) during startup. A HDD icon and a CD should appear on the gray screen. The HDD has the volume name written below and the CD is named Windows. Select the CD and boot to DOS.
Hit <ESC> to skip the README.TXT
Use PG UP/DOWN keys on an external keyboard to scroll through the readme, using arrow keys may lock DOS.
SeaFlash offers some options you should explore before performing the update. If you just want to do it ASAP then hit <D>.
Hit <L> to list compatible drives and FW version. (Column New FW version should state SD24, hit <ESC> to go back to main menu.)
Hit to scan your drive(s). (Shows your model and FW, <ESC> for main menu)
Finally hit <D> to update your Momentus XT to SD24. (takes about 15s to update)
Power off your Mac.
-- Although it did made sense to what you are saying to just follow Seagate's instructions. But they only had instructions outside the realm of MS Windows is to burn it on a disk and run a cold boot to the disk drive. Otherwise if Seagate did provide detail instruction on how to install this then can you provide me a link?
Thanks again....

How can I cut audio clips within iMovie?

This may be a simple solution but I just can't seem to figure it out. I would like to add audio (music) to just the beginning of my iMovie project. But whenever I drop a music file into the timeline, it stretches it all the way through the entire movie.
Also, I'd like to know how to only adjust my voice to certain clips of the movie, and not the whole entire timeline.

If you only want the sound clip for a set period of time, drag it on top of one of the video clips near the beginning that will prevent the audio from becoming a 'background music clip'. Grab the title bar of that clip in the Project window and drag it until the whole background area changes from purple/green to the normal dark grey color of the Project window. Same would apply to your voice clips as well, just drag those sound clips right on the very middle of the thumbnail image of the video clip, and then slide it around to where it needs to be by dragging it to the left or right.

Need help on how a user can control a video clip using their mouse

I need help. I've got a video clip of a rotating 3D
object(left to right) and i would like the user to be able to
control the rotation of the object using their mouse. I've looked
everywhere and i'm at a lost. Can anyone help me
Here is a link to what i'm trying to achieve:
http://www.sun.com/servers/blades/6000/gallery/index.xml?p=1&s=2
I know they use Java but i'm sure this can be done in Flash.
Thanks
Ray

Just use the plain linear fit!
(If you are discussing something you found in the forum, you should always include a link so we can see what you area talking about. What you probably found was a workaround that forces an intercept of zero for a special scenario. If you want to use general linear fit anyway, your matrix simply also needs a constant term)
If you still have problems, show us your code and some data.
LabVIEW Champion . Do more with less code and in less time .

Can't rename audio clips using letters - only numbers

Similar Messages

Maybe you are looking for