Can't rename Setting Group

I create a new Setting Group which appears as an Untitled Folder in the Settings Dialogue. I have double clicked on the name, right clicked, Spaced, Returned... I can't figure out how to change the name of the folder.
Any thoughts?
Thanks!
TAK

You have a Costume folder (this folder can't be renamed) inside that folder you can have costume settings or folders with costume settings inside them. Click on the untitled folder, in the Inspector window change the name to the folder.

Similar Messages

TS2481 I can't rename a group I imported into my address book?

I can't rename a group I imported into my address book...It just says "last import" and in the menu it is not available to choose....

Have you tried opening Address Book from either the dock or from the Applications folder? Address Book is a separate application (although it works together with Mail), so you can just open it without opening Mail.

I have an 'untitled group' in my contacts on my iphone 4. How can I rename that group please?

I have some contacts in a separate group that comes up as 'untitled group'. I want to properly name that group but have no idea how to do that and I cant find any reference to naming contact groups in the i phone online manual. Any solutions please. Thanks. Anthony

The other option is to back up your iPhone 4 to iCloud now, then reset the iPhone 6 (Settings>General>Reset All Content & Settings) and then set it up again using the most current iCloud backup.
Cheers,
GB

Can't Rename Group in Pivottable (Excel 2010)

Hi,
I have a pivottable with the names of our company's resellers for 2013.
Due to some errors in our booking routines, some resellers have different names but are actually the same reseller.
So in the pivottable that sums revenue per reseller, I try to group these different reseller names in one group and give the group the correct name of the reseller.
(Eg.
Group6
A Gain A/S
A Gain Crayon A/S
For some reason, I cannot rename the group Group6 to "Crayon A/S"!
I can rename it to "Crayon" or "Crayon A/" but not to the name that I need.
Even stranger, I sort the resellers on revenue and when I try to rename to "Crayon A/S" the sort disappears and the name of the group reverts to Group6.
I did not have any grouping before in this pivottable.
"Crayon A/S" is NOT the name of a heading".
The "/" is an acceptable character as I CAN rename to "Crayon A/" without the "S".
Haven't been able to fin anything about this strange behavior on the Internet.
Anybody have an idea?
Thank you in advance for your help.

Hi,
Based on my research, the name you're trying to use may already exist. You may try to simply add an empty space at the end of the name to see the result.
If still no luck, you may share the file to us via OneDrive and we'll help you find the cause. Be sure you have the private data hide before uploading.
Regards,
Steve Fan
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

Can't find setting for IE10 Compatibility View in Group Policy Management Console.

Hoping this is easy.
I'm trying to use the Group Policy setting for Compatibility View under Computer Configuration/Administrative Templates/Windows Components/Internet Explorer and it is not there.
The domain controllers are 2008 Standard SP2, so not R2. We are using ADMX files from a central store.
If I open the local GPEdit on my Windows 7 workstation I can see the setting for Compatibility View but cannot see it using RSAT or on the domain controllers themselves.
How do I get this setting to appear so I can use it?
Thank you.
Kenny

> If I open the local GPEdit on my Windows 7 workstation I can see the
> setting for Compatibility View but cannot see it using RSAT or on the
> domain controllers themselves.
Copy %windir%\policydefinitions from your win7 WS to the central store:
robocopy "%windir%\policydefinitions"
"\\%userdnsdomain%\sysvol\%userdnsdomain%\policies\policydefinitions" /s
Martin
Mal ein
GUTES Buch über GPOs lesen?
NO THEY ARE NOT EVIL, if you know what you are doing:
Good or bad GPOs?
And if IT bothers me - coke bottle design refreshment :))

Can we rename the log group name in 10g.

I have a database on 10.1.0.5 and want to rename the group name of 4 to 1 without moving the logfiles. ;)
thanks

I have a database on 10.1.0.5 and want to rename the
group name of 4 to 1 without moving the logfiles. ;)What difference does it bring?
I don't think its possible either.

Can't rename folders on Snow Leopard Server

I have 10.6.8 Snow Leopard Server running on a new Mac Mini server. Attached I have a Pegasus Raid storing all my files. I have a sharepoint set up for every project we work on but a couple act strangely. Users can create and delete folders but can not rename them once created. In order to rename they must drag the folder onto the desktop, rename and then replace the folder on the server. All permissions are set up identical to the other sharepoints which work fine. I have had a couple so-called "experts" look at the permissions in both the terminal and Server Admin. Everyone seems stumped. Any ideas?

Thanks for the input but I finally soved the problem. Here is what I found...
Although I had given users/group the ALLOW/FULL CONTROL premission with a sharepoint, I discovered that in Server Admin if you double-click on the User or Group name under the ACL permissions that a drop down box appears. This box allows you to fine tune the ACL but it appears that by default all of the boxes are not checked even though I granted the user Full Control. After checking all of the boxes I was able to create and rename folders in my share as expected.
This also had an similar effect if I denied Full Control. Some of the boxes remained unchecked and it left holes in my system where denied users could still access some files. Again by checking all boxes these holes were closed.
Does anyone know how to change the default so that all boxes are checked when assigning the Full Control permission?

How can I rename my pics in Bridge CS5?

How can I renams my pics in Bridge CS5?

Here's what is in the Bridge cs5 help pdf file. (I was not able to find this same help info from clicking help in Bridge cs5).
Batch rename files
You can rename files in a group, or batch. When you batch rename files, you can choose the same settings for all the selected files. For other batch-processing tasks, you can use scripts to run automated tasks.
1 Select the files that you want to rename.
2 Choose Tools > Batch Rename.
3 Set the following options:
Destination Folder
Place the renamed files in the same folder, move them to another folder, or place copies in another folder. If you choose to put the renamed files in a different folder, click Browse to select the folder.
New Filenames
Choose elements from the menus and enter text as appropriate to create new filenames. Click the Plus button [+] or Minus button [-] to add or delete elements.
•String Substitution
Allows you to change all or part of a filename to custom text. First, choose what you want to replace: Original Filename replaces the string from the original filename. Intermediate Filename replaces a string that is defined by preceding options in the New Filenames pop-up menus. Use Regular Expression allows you to use regular expressions to find strings based on patterns in filenames. Replace All replaces all substrings that match the pattern in the source string.
Options
Select Preserve Current Filename In XMP Metadata to retain the original filename in the metadata. For Compatibility, select the operating systems with which you want renamed files to be compatible. The current operating system is selected by default, and cannot be deselected.
Preview
One current and new filename appear in the Preview area at the bottom of the Batch Rename dialog box. To see how all selected files will be renamed, click the Preview button.
4 (Optional) Select a preset from the Presets menu to renaming with frequently used naming schemes. To save batch rename settings for reuse, click Save.

Error - "Group cannot be found" after rename user group

Hi,
I got the error message below after I clicked at 'edit' button in the "People and Groups" page (/_layouts/15/groups.aspx). Before I get this error message, I renamed the group name. It seems like it was looking for the old name when I clicked at
'edit' button. However, I can still access the Group Setting page by go to the group page -> settings -> Group Settings. Once I renamed the group name back to what it was. I can click at the 'edit' button without any error.
Can someone please explain to me about this issue?
Thank you,

Hi,
This is what I have in the log
Correlation ID: 383abd9c-5f4c-707e-c171-bb7bd63f8d2e Date and Time: 9/29/2014 2:50:53 PM
09/29/2014 14:50:53.08 OWSTIMER.EXE (0x3C3C)
0x16F4
SharePoint Foundation Monitoring
nasq Medium
Entering monitored scope (Timer Job MySite-Instantiation-Interactive-Request-Queue). Parent No
a415c502-5c7f-494d-b58e-f8deec07d9b8
09/29/2014 14:50:53.08 OWSTIMER.EXE (0x3C3C)
0x16F4
SharePoint Foundation Logging Correlation Data
xmnv Medium
Name=Timer Job MySite-Instantiation-Interactive-Request-Queue
383abd9c-8f41-707e-7d8c-e722a2386e1c
09/29/2014 14:50:53.08 OWSTIMER.EXE (0x3C3C)
0x16F4
SharePoint Portal Server
Personal Site Instantiation aj58q
Medium <LogTimerJobInstance> Starting timer My Site Instantiation Interactive Request Queue (e94a6caa-b0f5-4897-b489-585ca50c7803) for web application: SharePoint2013Intranet - 80. Function: MySiteInstantiationJob:Execute
383abd9c-8f41-707e-7d8c-e722a2386e1c
09/29/2014 14:50:53.08 OWSTIMER.EXE (0x3C3C)
0x16F4
SharePoint Portal Server
Personal Site Instantiation aj58r
Medium <LogTimerJobInstance> Finishing on timer My Site Instantiation Interactive Request Queue (e94a6caa-b0f5-4897-b489-585ca50c7803) for web application: SharePoint2013Intranet - 80. Function:
MySiteInstantiationJob:Execute 383abd9c-8f41-707e-7d8c-e722a2386e1c
09/29/2014 14:50:53.08 OWSTIMER.EXE (0x3C3C)
0x16F4
SharePoint Foundation Monitoring
b4ly Medium
Leaving Monitored Scope (Timer Job MySite-Instantiation-Interactive-Request-Queue). Execution Time=3.75969571551692
383abd9c-8f41-707e-7d8c-e722a2386e1c
b4ly Medium
Leaving Monitored Scope (Timer Job MySite-Instantiation-Interactive-Request-Queue). Execution Time=3.75969571551692
383abd9c-8f41-707e-7d8c-e722a2386e1c

Create Folder / Files and then can't rename or save for 1-30 minutes

On all of our Windows 2008 R2 File Servers (Some more reproducible then others) on our user shares only when users create a file/folder they can not rename it right away they have to wait 1-30 minutes. Here is an example of the process... Thoughts...
This is happening on our Windows 7 & Windows 8 machine to our Windows 2008 R2 servers this does not appear to happen on Windows 2012 File Servers.

Hi,
The issue could be due to thumbcache.dll still has an open handle to the local thumbs.db file and does not currently implement a mechanism to release the handle to the file in a more dynamic and timely fashion.
To work around the issue, please enable User Group Policy setting for "Turn off the caching of thumbnails in hidden thumbs.db files" to check the results.
For more detailed information, please refer to the article below:
Renaming a network folder in Windows 7 Explorer fails with "the action can't be completed..."
http://support.microsoft.com/kb/2025703
Best Regards,
Mandy
If you have any feedback on our support, please click
here .
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

E71 Uable to rename the group name ???

Can anyone please kindly tell me where to rename to group name? In my E71, I can not find a setting to edit group properties.
Thanks and Regards.

Try this: Contacts->highlight the groupname->Options->Group->Edit group there You can change the name.

Can we have a group name in oracle database???

Hello,
what i want to know is that can we have a group name, a set of all usernames for a database,
the whole purpose is to simplify the grant statement, rather then doing this
grant select to <user1>
     grant select to <user2>
     grant select to <user3>
     it would be simple to do
     grant select to <group1>
     where group1 consists of user1,user2 and user3...
     cheere

all_users
describe all_users
Name                                      Null?    Type
USERNAME                                  NOT NULL VARCHAR2(30)
USER_ID                                   NOT NULL NUMBER
CREATED                                   NOT NULL DATE

How can I manually set the Camera Roll to start at an arbitrary image number, i.e., IMG_0553.JPG?

I have an iPhone 4s, currently with iOS 5.1. I use it with my desktop computer which runs Windows Vista (and has the latest iTunes installed 10.6), and my laptop, which has Windows 7 and the latest iTunes. I use iCloud and Photo Stream primarily with the desktop computer.
Since receiving the iPhone on launch day, (Nov...14?, 2011), I've had to "Set [it] up as new" twice, most recently this morning.
After setting it up as new, the Camera Roll starts over with pictures at IMG_0001.JPG. That means, that, after my first picture after this latest reset, I'll have three pictures all initially named IMG_0001.JPG, and instead, I'll have IMG_0001.JPG, IMG_0001 (1).JPG, and IMG_0001 (3).JPG in my photo library. This robs me of the ability view my photos sorted by name, which is often the default sort order in my photo folders, and still see them chronologically. I can, of course, sort them by Date Created, but it would be more flexible if I could do either one.
Therefore, I'd like to set Camera Roll to start numbering its photos starting with whatever the next number higher than all the rest in my library would be, in this case, IMG_0553.JPG.
I can't just use Windows to go into the iPhone's Camera Roll and rename the first photo I take to be IMG_0533.JPG. The iPhone just doesn't allow tampering with the filename that way. Can I even count on Camera Roll to note the presence of the highest numbered file in its folder and then just name the next picture taken the next higher number?
Since I have no reason to believe that I won't have to reset the phone again, I'd like for whatever method I find to be one that I can use to set the Camera Roll to start at whatever other number I need when the time comes.
Suggestions welcome...
I have an idea that I'm about to try...I'll report back if it succeeds...
UPDATE: So what I tried to do was, with an empty Camera Roll, I uploaded a picture with the filename and number that I wanted (IMG_0533.JPG) into my Photo Stream, then saved that picture to my Camera Roll, hoping it would retain the file name, and then Camera Roll would just use the next number. That didn't work. It saved into Camera Roll as a brand spanking new IMG_0001.JPG.
Message was edited by: Shadowhawk kTreva

To bring the solution into this thread, here are the consolidated solution bits from the other thread:
I installed i-Funbox and found the file referenced in that other thread ( iPHone / Raw File System / PhotoData / MISC / DCIM_APPLE.plist ).
That file has a section that I'm replicating below that is the part that that original poster edited, and is the part that needs to be edited for my problem also:
<key>DCIMLastFileNumber</key>
<integer>5</integer>
That other thread's original poster wanted his photos to start with 0001, so he set his "DCIMLastFileNumber" to 0.
I wanted my next picture to be IMG_0553.JPG, so I edited my file's 5 to 552.
I did that editing by first copying the file to my laptop (using the Copy To PC command), then opening it up in a text editor. I did the edit, then saved it.
After that, I used i-Funbox' "Copy From PC" command to copy the edited file back to the same location, hoping that the program would take care of any permissions, etc.
I had to do the Copy From PC twice.
On the first try, it seemed to copy just fine, but, for whatever reason, the copied file was empty when I opened it for verification. But I tried again, and that seemed to work (opened for verification, and it was as expected).
I then unplugged it, copied a picture from the Photo Stream to the Camera Roll, then plugged it into my laptop to verify the filename. It was exactly as I wanted: IMG_0533.JPG. Then, for fuller verification, I unplugged it, took a new picture, then replugged it in, and confirmed that the next pictures (I had HDR on) were IMG_0534.JPG and IMG_0535.JPG.
...and that's where I am. Nothing has crashed yet, too, which is all to the good ('course, I haven't done anything else with the phone yet).
Fingers crossed!

Can't delete Calendar Group or Revert it to a plain calendar

I am trying to start using iCal in an office setting where we will be synchronizing across a few different computers. Having played a bit with fake data and made a few sample groups/subcalendars I'm now trying to go back to a clean slate so we can start in earnest. But having deleted most of the false calendars I am left with one "calendar group", with a single subcalendar. I do not want any calendar groups--just single calendars, but any new calendars I add automatically become subcalendars instead of being on equal footing with the "group" calendar. Is there any way to delete the group and just end up with a simple list of individual calendars? Thank you.

Thanks for the suggestion, John. I was hopeful that would work, but it didn't. I can't get the new calendar out of the group, no matter how far or in which direction I drag it, and therefore I can't delete the group. I could delete either of the subcalendars (but only one--it insists on the group having a minimum of one subcalendars--understandable, I guess).
Any other ideas? Do I need to somehow uninstall and reinstall iCal and start over? (I used to use Windows so I got used to uninstalling and reinstalling software....)

How to set group contacts in nokia asha 305

how to set group contacts in nokia asha 305....thank u......

Can Some one Tell same group contact creation for ASHA 308 too?

Can't rename Setting Group

Similar Messages

Maybe you are looking for