Can't render preview on some clips

In my timeline I've got a bunch of clips - some have yellow lines above them in the render bar, some red, some green.  And then some have no lines at all, it's these that are the problem.
When I tell it to 'render preview' it will make all the clips with yellow and red lines turn to green just fine, but does nothhing with the clips that have no lines above them at all, it's like it thinks 'these clips are so easy to play I dont need to render preview, they dont have effects or anything on them', however it is sorely mistaken because when I play back the preview everything plays fine except those clips, which stutter and skip (because they are uncompressed HD video).
Is there a way to force every clip to 'render preview', not just the ones Premiere thinks need it?

Thanks Colin, here is my info:
General
Complete name                    : K:\final\1 Introductory\3 Tree Run.avi
Format                           : AVI
Format/Info                      : Audio Video Interleave
File size                        : 56.4 MiB
Duration                         : 7s 567ms
Overall bit rate                 : 62.5 Mbpsve
Video
ID                               : 0
Format                           : JPEG
Codec ID                         : MJPG
Duration                         : 7s 567ms
Bit rate                         : 60.7 Mbps
Width                            : 1 280 pixels
Height                           : 720 pixels
Display aspect ratio             : 16:9
Frame rate                       : 60.000 fps
Color space                      : YUV
Chroma subsampling               : 4:2:2
Bit depth                        : 8 bits
Scan type                        : Progressive
Compression mode                 : Lossy
Bits/(Pixel*Frame)               : 1.098
Stream size                      : 54.7 MiB (97%)
Audio
ID                               : 1
Format                           : PCM
Format settings, Endianness      : Little
Format settings, Sign            : Signed
Codec ID                         : 1
Codec ID/Hint                    : Microsoft
Duration                         : 7s 567ms
Bit rate mode                    : Constant
Bit rate                         : 1 536 Kbps
Channel(s)                       : 2 channels
Sampling rate                    : 48.0 KHz
Bit depth                        : 16 bits
Stream size                      : 1.39 MiB (2%)
Interleave, duration             : 946 ms (56.75 video frames)
I am editing it off a seperate hard drive, an external harddrive connected via USB.  So that could very well cause it.
I'd like to keep editing it there though, if there's some way I could tell premiere to cache the files even though they look like an agreeable format...

Similar Messages

  • Riddle me this-. Orange Render bar for some clips

    I hope my system isn't getting tired and old but I have never had a project where all the clips needs to be rendered. No effects applied or anything. I converted these clips to Apple Pro Res(LT) and I still need to render. When I convert my RED footage, it works fine. But not the MVI files. See picture on this link. The files have same codec, one needs to render but the other doesn't!
    http://www.redmoonlight.com/PictsOnWeb/OrangeRender.png
    Thanks for you time or any solution you can give.
    Things I did: Trash prefs, restart, video scope closed

    The orange render bar-
    "Indicates effects that exceed your computer’s real-time playback capabilities but are enabled anyway because Unlimited RT is selected in the RT pop-up menu in the Timeline. Unlimited real-time playback lets you play more effects but increases the chances that your sequence will drop frames during playback. This mode is useful for getting a real-time preview of complex effects compositions." - form the manual.
    I interpet that it mean it will playback withourt requiring rendering until you apply an effect.
    One of your clips is set to "maximum" quality with a higher bitirate than the one set to "Normal" quality. Not sure if that is causeing it.
    MtD

  • Can only download preview of some pdfs on iPad / iPhone

    Hello,
    I have a strange problem with some pdf download links on my iPad and iPhone
    and hope that somebody here has gone through that before and give me a hint.
    Problem description:
    I have a problem when I try to dowload a pdf. If the pdf is linked with a normal
    http-link, I have no problem opening it, it is shown in an extra tab in safari and
    I can save it in iBooks. So far so good.
    But: If the dowload is initiated with a command-button, then I only see a 1-page
    preview of the pdf as an image. The image shows the first page of the pdf correctly
    but I can find no way to download or save the complete pdf. If I save the preview
    as an image, I see no content in this image afterwards, just a small text saying
    "pdf".
    What I can do, is download this pdf with Safari on OS X 10.10 and on Windows
    with any Internet Browser. Android is also no problem.
    So I did a lot of research and testing:
    - I googled a lot and followed all related instrunctions I could find: no success.
    - I saved the pdf on my Mac, mailed it to myself and opened it on the iPhone or iPad.
    No problem to view the pdf, it just wouldn't download.
    - So I enabled and disabled restrictions on all devices, with no success. I also added
    the website to the trusted websites when enabling restrictions, no success.
    - I fiddled around with all safari-options, enabled and disabled cookies, switched
    between "open in background"/"open in new tab" and tested all other options,
    even those who shouldn't have any influence on this problem. No success.
    - Next I installed other apps capable of viewing PDFs since I thought them registering
    as PDF-viewers could change this behavior. Again no success. (I tested Acrobat
    Reader and Amazon Kindle)
    - After that I installed Google Chrome: Only a slight change happend, now I saw
    one and a half pages (instead of one) of the pdf as a preview.
    - Next I updated my iPhone 5 from iOS7 to iOS8.1.: No success.
    - I was so desperate after that, that I even resetted my iPhone to factory-defaults,
    completly erasing all content and settings. Again no success.
    - After that I was running out of ideas.
    Technical background:
    - The pdf I'm trying to download contains confidental content so I unfortunately
    cannot provide a link to it. But I know it's a dynamically created pdf, hence the
    command-button instead of a normal link.
    - The pdf contains no forms and other fancy stuff, just plain (ok, formatted) text
    and some small icons.
    - I can easily download and view other (static) pdfs from the same website.
    - I have this problem on my iPhone 5 with iOS7 (latest version and iOS8.1 and
    on my iPad2 with iOS7 (latest version).
    - It works well on my MacBook with OS X 10.10. and on Windows and Android.
    - I can view the pdf on iOS if I send it via Mail and open it locally, I just can't download it.
    - I think while searching for a solution I found a document saying something about
    possible problems on iOS when providing download-links within html frames.
    Unfortunately I could't find this document again but I checked and the download-
    button indeed is embedded in a html frame (for what it's worth).
    Any hints would be greatly appreciated!
    Thanks in advance,
    Wolfram

    It looks as if your server does not support 'byte-range requests'. This facility is necessary for iOS devices (it involves calling for part of a file at a time rather than the whole file) so you will need to take this up with the people running your server. Note that this applies to the media files, not the feed.

  • Can´t render&preview stabilized quicktime-video

    Hello all,
    I´ve encountered a very annoying problem while using After Effects warp stabilizer on a quicktime-video (4K, ProRes444, 24fps, 16-Bit).
    After applying the effect, I can see the results in the preview. But when I am closing the AE-project and reopen it the ram-preview stays black even a rendering is impossible. The RAM fills with data, the CPU start working high but not a single frame will be rendered.
    I tried:
    on/off OpenGL
    various multiprocessor/RAM configurations
    new project/new composition + new warp effects
    System: Mac OSX 10.6.8, AE 5.5, MacPro 2x 2,26 Quad, 24 GB, Render: 9CPU a 2 GB RAM.
    I would be thankful for any help.
    Best,
    Marko

    Hi Mylenium,
    thanks for your help.
    But the settings mentioned in the link you´ve posted were already made by default. So i tried to switch back to the non default. But non of them worked for me :/
    Mediacache flushing didn´t change anything :/
    Thanks!
    Marko
    PS: It´s CS 5.5

  • Why can I not preview and render all sequence clips on a CS6 project when using CC?

    I am having issues with rendering all of the sections in my sequence. Some clips will render just fine while others simply display as a blank screen (see screenshot 1). Also, parts of a clip will render while others will not (see screenshot 2).
    Screenshot 1
    Screenshot 2
    Thanks for the help in advance.
    About my Mac:
    Proccessor: 2.4 GHz Intel Core i5
    Memory: 8 GB 1333 MHz DDR3
    Graphics  Intel HD Graphics 3000 512 MB
    Software  Mac OS X Lion 10.7.5 (11G63)

    Hi, drhalm. 
    Thank you for visiting Apple Support Communities. 
    This sounds like your music is not stored locally on the device and accessing your purchases in the cloud.  There is a new feature in iOS 7 that shows all purchased music and requires and Internet connect to play this content.  You can download any missing media via the steps in the first article below.  If the media is located in your iTunes music library, you can sync the media from your Mac to your iPhone.  If unfamiliar with the process, I have included the steps in the second article below. 
    Downloading past purchases from the iTunes Store, App Store, and iBooks Store
    http://support.apple.com/kb/ht2519
    iTunes 11 for Mac: Set up syncing for iPod, iPhone, or iPad
    http://support.apple.com/kb/ph12113
    Cheers,
    Jason H. 

  • Can't "Apply" Fast/Slow/Reverse on some clips

    I have some clips in my timeline that I cannot change the speed on. This typically happens with a clip that I already edited in some way. Particularly when I have already altered the playback speed on it before. When I try to do this now, the Apply button is grey and won't respond.
    Anyone know how come? Thanks

    I have a somewhat similar problem. For a while now, I haven't been able to apply any Fast/Slow/Reverse effects at all. I can select the effect, and even preview it in the main window, and when I click apply it even takes a little while and shows a progress bar while it "renders" the effect. But when it's done, I'm left with a clip with no thumbnail (in the timeline) that, when played, just plays what was there already, but since it extends the length of the clip in the timeline, the whole rest of the timeline is off from what the movie actually is.
    I'm using iMovie HD 5.02
    Anybody run into this before, or have any ideas?
    Thanks

  • Can't read or write some files, internet is failing, youtube won't load, software I tried to install was in Slovenian, not dutch or english like in my systempreferences settings, pictures and files won't preview with spacebar, etc. Malware?

    Specs:
    iMac 10.8.5
    3,4 GHz Intel Core i7
    32 GB 1600 MHz DDR3
    Can't read or write some files, internet is failing, youtube won't load, security software I tried to install was in Slovenian, not dutch or english like in my systempreferences settings, pictures and files won't preview with spacebar and are randomly corrupted, when I entered something in the Youtube searchbar (when it was still working) it send me to a site with sexadds.
    I tried restart my iMac and when I was logged back in, my dock preferences were reset.
    Also tried to download some security software to check my Mac for malware, but when I did, I tried several, I got a notification that said something like 'dumpfiles (don't know if this is the right translation...) damaged'.
    I'm taking screenshots from all the weird notifications I get and even three quarters off the screenshots I took in the last three hours are already unreadable.
    It started this morning when I tried opening a Premiere Pro file on which I worked the night before.
    When I tried opening it, it said the file was damaged and could not be openend.
    I tried opening it with AE or importing the file in a new project but nothing helped.
    When I tried looking for autosaves, this is the really weird part, there were none.
    Even though there are autosaves from my other projects, this one was completely gone.
    It looked like the day before never happened on my computer.
    Also when I openend Premiere all the recent projects had been wiped.
    So at first I thought it was a Premiere Pro failure.
    But than, later on the day, I tried loading some RAW files from my compact flash card.
    This is where I would get an error (error -36) which said some data cannot be read or written.
    I tried importing the files with a view different technics, from dragging to importing via Lightroom and I succeeded with Image Browser.
    But when I tried moving the files to an other folder the same error occurred.
    While dealing with this issue I wanted to put on some soothing music on youtube.
    This is when the next weird thing occurred: youtube wasn't completely loading in Chrome. I refreshed a view times, checked the internet connection and still no difference.
    When I tried in Safari it did work but when I clicked enter on the searchbar in Youtube, a page with sexadds appeared (I didn't install AdBlock in Safari...).
    I read about this 'phishing' where you are redirected to a site were a possible malware installment can take place...
    I don't know if it's connected to any of the problems I've been having but I just never experienced this on a mac, I have been a Mac user for 10 years now.
    On top of it all, internet started working worse and worse and now it's not even working at all. I had to fill in the password over and over, normally it remembers.
    Just like my system preferences, all the preferences I had with Chrome where also reset.
    Also somewhere in between I got this notification: Mac OS X must restore library to run programs. Type your password to allow.
    To me this is all very weird and suspicious. I have clearly no idea what's going on. Could this be another sort of trojan horse or malware?
    Some background info which could be helpful for solving this mystery:
    two months ago the one year old Fusion Drive in my iMac just broke out of nowhere.
    I got it replaced by a qualified apple repair store.
    When I got my computer back, all the files where gone.
    I got on the internet without AdBlock installed yet.
    A game or whatever it was, can't clearly remember, got installed by accident.
    I deleted it immediately.
    Only two weeks later, I couldn't log in to my account. It didn't recognize my password and username. 
    So I brought my mac back to the store.
    Here the repair guy said it was a minor thing and he just needed to reconnect my account. He also mentioned he found a downloaded game name Sparta and it probably had something to do with the error.
    I asked him; could it be a virus? He replied no way.
    I don't know why I couldn't be a virus, just because it's a mac doesn't mean it cannot be done.
    So today I tried installing anti virus software (such as avast- was in a weird language looked like slovenian, clamxav - was in slovenian) but I couldn't install them.
    PLEASE help me! I don't know what to do anymore, I work fulltime and I need my computer, I have no time to bring it in for repair, are there other perhaps easier ways?
    Could this be the work of a virus or a malware? Or is it a disk permissions issue?

    It sounds like you may have multiple problems, but none of them are likely to be caused by malware.
    First, the internet-related issues may be related to adware or a network compromise. I tend to lean more towards the latter, based on your description of the problem. See:
    http://www.adwaremedic.com/kb/baddns.php
    http://www.adwaremedic.com/kb/hackedrouter.php
    If investigation shows that this is not a network-specific issue, then it's probably adware. See my Adware Removal Guide for help finding and removing it. Note that you mention AdBlock as if it should have prevented this, but it's important to understand that ad blockers do not protect you against adware in any way. Neither would any kind of anti-virus software, which often doesn't detect adware.
    As for the other issues, it sounds like you've got some serious corruption. I would be inclined to say it sounds like a failing drive, except it sounds like you just got it replaced. How did you get all your files back after the new drive was installed?
    (Fair disclosure: I may receive compensation from links to my sites, TheSafeMac.com and AdwareMedic.com, in the form of buttons allowing for donations. Donations are not required to use my site or software.)

  • Greetings, I am working in Final Cut Pro 7. In the timeline some clips show as offline. I tried going to sequence and reconnecting to media but it does not work. I can still see the video in the timeline and work with it. It just has the red box.

    Greetings, I am working in Final Cut Pro 7. In the timeline some clips show as offline. I tried going to sequence and reconnecting to media but it does not work. I can still see the video in the timeline and work with it. It just has the red box. Thanks! Olga

    If the clips are not actually missing, you could try to refresh the timeline by using cmd-0 and then going to the timeline options tab. Then select name only where it says "thumbnail display". Press ok to accept the change, then repeat the process to add thumbnails back to your timeline.

  • I open project, says some clips in trash, can I these back into movie?

    hello imovie guru's I need some help with my quandry, when I do open a project I've been working on for quite some time now, it tells me there are some clips in the trash would I like to view, or not? Of course I say yes, because when I say no, there is no film left, but they're the clips I want/need. so is there a way to get them back into the original movie? I'm afraid I've emptied the trash in the iMovie by accident? thinking I could just grab them and move 'em back in manually. can I recover these clips without having to go back and start over with the whole project again. thanks for your support ahead of time. VHS conversions from my 1st. band 30 odd yrs. ago. geeky looking cats, but fun to watch and be able to convert to dvd finally for the other boys/men now in the band. who'll be astonished I've kept them all these years. HELP!!! But these classic old videos are great for critic-ing my progress thru the yrs. which backs up my theory of "less is more", especially when making music. Nothing but the Blues baby, gots to keep the American musical heritage alive!!

    1. you can copy and paste between projects. So, in project A, select what you want to reuse and use the copy command (command-c). Go to project B, place the playhead to where you want your clips to be, and paste (command-v).
    2. yes. also look at the auditions feature if you are aiming to go back and forth between different versions (where the clip is enabled/disabled).

  • I made a movie in iMovie then deleted the clips in it. I have reimported the clips in an event with the same name as previously and some clips in the movie are still saying source slip missing even though they are there. What can I do?

    I made a movie in iMovie then deleted the clips in it. I have reimported the clips in an event with the same name as previously and some clips in the movie are still saying source slip missing even though they are there. Some clips are fine in the movie, but most are just black and when I hover over them, it says source clip missing. How to I fix this? Thank You

    I did that too, then I did a migration assistant to a new Mac and ALL of my movies have Source Clip Missing now, even though the original clips are still in the iPhoto Videos.  I can stand to re edit one or two projects, but not ALL.

  • Can Lightroom render 1:1 Previews when importing my Photos?

    Q: Can Lightroom render 1:1 Previews when importing my Photos?
    FAQ revised 25 April 2009
    Ans: Prior to version 1.3 Lightroom did not support 1:1 preview rendering during import, the actual options for  Initial Previews being:  Embedded or  Standard. However, more recent versions allow four types of previews to be rendered during import (i.e.  Minimal, Embedded & Sidecar, Standard,and  1:1). It's also worth noting the following on Lightroom import behaviour: 
    1.  Minimal (Lightroom default) or Embedded & Sidecar is by far the quickest method for getting your photos into the Lightroom catalog. However, the lack of Standard, which is the minimum that Lightroom can actually work with, means that the application will render standard-sized on demand (i.e. as thumbs/photos become visible within the photo Content area). Asking Lightroom to undertake this task at the same time as you're trying to use the application will result in sub optimal performance. 
    2. Importing your photos with the  Standard preview selected within the Import dialog will take longer than 1 above, but on completion Lightroom will already have previews that match the minimum requirement for working in the Library. Assuming that you won't be looking at every image at 100% (i.e 1:1) then this preview size will allow you to quickly review, rate, label, even make quick colour/tone adjustments, etc the photos within the Library module. If you need to see a photo at 100% then Lightroom will render that preview on demand (while it's being rendered you'll see the "Rendering Preview" overlay appear at bottom of preview).  Note that when using a 23" or larger monitor it to is best to set the Standard sized previews so that they are rendered at 2048 pixels
    3. Importing your photos with the  1:1 preview size selected will result in Lightroom taking even longer to complete the import process than would have been the case if standard-sized had been chosen. 1:1 previews also take up significantly more disk space than standard-sized.
    If you're not going to be working on the photos immediately after import but do need to get them into Lightroom as quickly as possible, then the best option would be to choose import option 1. Once the photos have been imported choose either  Render Standard-sized Previews or  Render 1:1 previews from Library module Library>Previews menu.

    When I search these forums for "CFCopyFormattingDescription", I find a bunch of crash reports posted that look almost exactly the same as mine.  It appears there's a bug in iPhoto, perhaps when reading metadata from the JPG file (readRawTiffPropsFromPath).
    Interestingly, the Preview app can open and display the file just fine.  I even opened the inspector and it showed all of the TIFF and exif metadata just fine, no crash.  The file also opens just fine on Windows.
    Now how do we get the attention of the iPhoto development team so I can send them the photos, have them reproduce the crash, and fix it?

  • Why can't some clips fast forward?

    I am on my first ever imovie project for school. I need to fast forward some of the clips so that my video can fit into the stipulated duration. Some clips can fast forward whitest others can't. Those that can't fast forward can however respond to slow motion. What is the reason and how can the problem be solved?

    I am unable to adjust playback speed as well. The options for modifying 2x, 4x, 8x, and 20x are not highlighted to click on. The fast foward section under modify is highlighted.

  • After upgrading to Premiere Pro CC 2014, I can't change the render preview location

    Ever since I downloaded Premiere Pro CC 2014, I cannot re-route my render preview files. I have two internal hard drives and I need the files to go to my secondary one. With CC, it did this just fine, but since I've upgraded to 2014, it will not do it. I've set it the same way I did before in Preferences/Media, then set the Media Cache Files and Media Cache Database to the new hard drive.  It's eating all my hard drive space and I cannot render or export a large sequence. Is there a trick to this I'm missing that has changed?

    Thanks Neil! I'm actually wondering how to change where the preview files go. I've attached two screen grabs. Right now my media cache is going to my SATA drive (my smaller of my two internal hard drives and the drive where Premiere Pro is located.) I want to re-route my render files to go to my Macintosh HD drive which is much larger and gives me more breathing room. I could do that before but since I've upgraded to 2014, even though I have it set in preferences, it STILL goes to my SATA drive. So annoying! I'm wondering if I'm doing something wrong or if it's a bug. I'm still running Mountain Lion (getting ready to finally upgrade, I've just been needing to backup my computer), could this be the reason? Any ideas? Thanks so much for the help!

  • Effects and key-frames not working on some clips Premiere CC 2014

    Hi. I am having an issue where effects and key frames applied to both audio and video are not working, but only sometimes. Even after I render or export the video, the effects are not showing up. For example, trying to adjust volume using key-frames on some clips works fine, and not at all on others. The key-frames show up and I can see the volume changing in the effects panel, but it is not happening. Another example is changing the opacity on some video clips and it does not work sometimes. Same thing, I can see the key-frames and the values changing, but it's not actually happening. I have uninstalled and re-installed premiere pro and media encoder with no luck. I have uninstalled and re-installed the latest Nvidia drivers with no luck. Just to restate, this only happens on some clips and rendering or exporting the video does not help. My computer specs are:
    MSI GT60 Laptop:
    Intel Core i7 4800MQ (2.70GHz)
    16GB Memory 1TB HDD 128GB SSD
    NVIDIA GeForce GTX 880M 8GB
    2880 x 1620 16:9 3K Display
    Windows 8.1 64-Bit

    Here is the exact screenshot.  Now I'm also trying other effects as stated in my original post.  But this effect is just an example.  Is there really something that I'm doing wrong here?  Or am I forgetting something?  Is there some special "adobe doesn't let keyframes work on mpg's" rule or something silly like that?
    I wish that I could post a video, but I don't know how.
    Please let me know what I need to do to make this work properly.
    TEX

  • Adobe Media Encoder can´t render out AE Ray-Trace Composition

    Hey,
    AME can´t render out my composition (or sequence if i include the comp in a PP sequence) which includes some 3D stuff.
    I am able to render it out in AE in a few minutes, preview it easily in AE and even in PP but i´m not able to render it out in AME or PP.
    AME says it would take like 10+ Hours to render it and doesn´t come to an end.
    I tried multiple encoding settings but nothing worked.
    Also i checked, that cuda rendering is enabled in all my Adobe programs, but nothing helped...
    AE File .aep :
    Dropbox - Twitch Infovideo.aep
    AME .epr Preset for encoding :
    Dropbox - Media Encoder Error Test.epr
    Thanks for helping,
    Johannes

    It raises another question: what settings do I need to encode the comp in 720p resolution without taking up lots of space?
    Well, it depends on whether you need a production master (something for broadcast, for example, or to use as a source for other encoding tasks) or if you want a version for distribution. If it's the former, there's nothing wrong with "lots of space" - A Quicktime file with PNG or Animation codec is a good idea, but it will take a lot of space. If it's the latter, H264 is perfect but there's no built-in preset to take 720 material to the web.
    You could do this:
    * Pick the generic H264 template. You'll see that it will give an error if you attempt to render, because the default setting uses an H264 profile/level which doesn't let you use HD resolutions.
    * In the H264 video options, set the "Profile" menu to "Main" and "Level" to 4.0. That will keep it compatible to Quicktime and Flash player, while allowing larger frame sizes and higher bit rates.
    * Set Target Bitrate to 5-8 Mbps and Maximum Bitrate to 9-10 Mbps if you're targetting web delivery. That's a bit over what Apple uses for 720p content on the Apple TV, for example.
    The H264 original preset will instruct you in the comment field to stretch to 640x480 in Output Module. There's no need, since you are using a profile/level combination which allows higher frame sizes.

Maybe you are looking for

  • How to view the Billing data,direct postings from FI and Over head costs

    Dear All, I have created a PA report by Report Painter and when I execute the report by KE30,I could able see the report for billing data by selecting the 'F' and when I want to see the direct postings from FI,I have to come back to initial screen ,t

  • How do I set up for extending my non-apple wi-fi network with Airport Express?

    I have Trendnet router that I use for providing wi-fi capabilities in my home.  The problem is that it is set up in my basement and it doesn't extend to the back of the house.  I'm also having problems setting up my wireless printer with this setup. 

  • Slideshow PopUp

    Hello everyone, On the latest release of InDesign CC for an ePub is it possible to create a popup that contains a slideshow done with Object States? So in other words, the user taps on a button (Show/Hide Buttons and Forms Action), a pop up windows a

  • Hierarchy in SCM

    Hi, can anyone tell me if it is possible to create automatically hierarchy of products in SCM in tx /SAPAPO/RELHSHOW throught R3 with CIF ? I think that in this system they are created with code in function module /SAPAPO/SAPLCIF_DDE. Anyone knows wh

  • Large Catalog with missing files

    I have a very large catalog (over 30k files) in PSE 8. I just purchased PSE 10 and will be upgrading it. As I was making a full backup prior to the upgrade, I realized there are many missing files (requiring reconnecting). Some PRE files that I purpo