Can't Render Whole Project

Hey,
I am doing some work for people with my new program (FCE) and i got to about half way and decided to render by going: sequence, render all, both.
It appeared to be doing so but then after about 2% the 'rendering box' just dissappears. A while later i get an error message saying 'FXScript Outofbounds'
i have no idea what this means, so i tried rendering each bit individually, which appeared to work.
So i tried again to 'render all' and once again it wouldn't work.
So this time i tried: sequence, render only, and then chose all of the options there (unlimited, preview, proxy etc.) and they all worked except for preview.
Which did the same thing as when i try to render the whole project.
Help! its Urgent!

Having same issue here. Also getting crashes on "render". I am using a source DVCProHD clip and rendering the graded clip to the preset Apple Pro Res 444.  You can see the flicker effect here horizontal lines:
Another issue, when I "save" the "look" it isn't saving what is on the screen. IOW, if I finish grading and save the project. Then save the look, the thumbnail is not even close to what is on the screen. If I "save" the look and immediately select that saved look it completley and randomly changes the grading, sometimes turning red, sometimes green. So these are not working for my in After Effects.
This is the "look" I get when I save the above grade"
Speedgrade CC 2014
Intel Mac Pro
OS 10.8.5
16 GB Ram
Here is the top of crash report right after hitting "render"
Process:         sgmacosx [4198]
Path:            /Applications/Adobe SpeedGrade CC 2014/Adobe SpeedGrade CC 2014.app/Contents/MacOS/sgmacosx
Identifier:      adobe.SpeedGrade
Version:         8.0.1 (8.0.1)
Build Info:      Adobe SpeedGrade CC 2014-0~7
Code Type:       X86-64 (Native)
Parent Process:  launchd [205]
User ID:         502
Date/Time:       2014-09-18 14:02:09.129 -0400
OS Version:      Mac OS X 10.8.5 (12F45)
Report Version:  10
Anonymous UUID:                      9C3EF4FE-EA8C-E833-5EAC-A4F4D909664F
Crashed Thread:  28
Exception Type:  EXC_CRASH (SIGABRT)
Exception Codes: 0x0000000000000000, 0x0000000000000000
Application Specific Information:
*** error for object 0x16a396808: incorrect checksum for freed object - object was probably modified after being freed.

Similar Messages

  • My video i have successfully worked on for seven days now won't open at all.  It says there is no sequence of this type found... But in the very bottom bar I can see the whole project load.  But the only option from the error screen is exit out of Premier

    My video i have successfully worked on for seven days now won't open at all.  It says there is no sequence of this type found... But in the very bottom bar I can see the whole project load.  But the only option from the error screen is exit out of Premiere Pro CC.  I am on a PC withe Windows 8.1 and apps are up to date.  Thanks much for any help!!

    Hi Bryan,
    My video i have successfully worked on for seven days now won't open at all.  It says there is no sequence of this type found... But in the very bottom bar I can see the whole project load.  But the only option from the error screen is exit out of Premiere Pro CC.  I am on a PC withe Windows 8.1 and apps are up to date.  Thanks much for any help!!
    Sounds like an activation issue. Quite Premiere Pro. Sign out of Creative Cloud. Restart Premiere Pro. Sign back in: http://bit.ly/CC-sign-out
    Hope that works for you.
    Kevin

  • With fcp can you render/burn project to dvd?

    Can Final Cut Pro render/Burn project to a DVD?

    FCPX has a basic Export to DVD feature which will finally burn a disk.
    'basic' because it has no fancy design nor menu options such as iDVD, DVDSP or Encore etc.-

  • Can you render clips / transitions

    I have a new Mac that is very very fast. However, even still some video transitions don't play smoothly.
    I can export the whole project into a quicktime movie or .m4v file and see them smoothly, but I cannot see them play smoothly in iMovie.
    Is there a way for iMovie to pre-render effects and transitions so that they don't have to be generated in real time (that is too slow for real time)...?
    (Many of the source files I'm working with are .m4v files, which could be why the transitions are playing back poorly.)

    You can convert the m4v files to Apple Intermediate Codec. That would convert the highly compressed h.264 into full i-frames. You can optimize the clips from within iMovie, or you can do this in MPEG Streamclip or QuickTime Pro.

  • What codec to use to render HD project to reopen and then re-edit

    I'm new to hd video so please forgive some of my questions.
    I do mainly large projects such as weddings conventions etc. I usually render out my projects in 2 parts and I then re-edit the last half and join them and finish my project.
    My question is what codec do I render out my project parts to bring back in as one clip to join with the second half.
    Joan

    My import is HD and I split my projects into sequences as needed, my workflow habit is backup to make sure my project is protected. I realize I could do sequencing and then copy paste everything to a final sequence but corrupted adobe files over the years has made me more protective of my projects.
    I guess my question is can I render my project in part or as a complete project to HD because usually I would burn a dvd to view, and any tweaking I would like to do it on the rendered movie if possible, quicker and easier then re-rendering everything back out.
    I have a 2 hr wedding I completed on New Years Eve and I am treating it like any other wedding that i used to shoot on AVI. I made the move to HD and I'm trying to keep my same work habits. I mean the shooting and the actual editing doesn't change, its the media handling that is the bottle neck for me.
    I'm assuming most of it is my problems result from my inexperience with the HD format handling.
    To reword the question to I have save my movies as an sd movie which is a basic avi and I can export back in and re-edit in adobe if I choose to. Do I have the same options in HD
    Joan

  • Suddenly my whole project is in 3:4 how can i switch back to 16:9?

    I don't know why or how, but since some minutes my whole project is in 4:3 format.
    I tried to restore the project to an older version, but the resolution is still 4:3.
    I have really no time to redo the whole editing, the movie has to be finished today!
    Does someone know how i can switch everything back to 16:9?

    Thanks for the answer, i added a screenshot of one file.
    They all were correct a few minutes before, so i don't think the problem is by the files.
    Every backup has now the same ratio of 4:3 so i think there is a problem with a program setting,
    maybe a keyboard combination pressed by accident?

  • Can I invoke "Organize Imports" for whole project?

    On the features page on labs.adobe.com there is a mention that Organize Imports should work for "projects". Does this mean that I can invoke this function for a whole project or do I need to do it file by file? If it should work for a whole project, how to invoke it?
    Thanks,
    Borek

    "Organize Imports" isn't available at project level.
    It has to be invoked file by file, as it not just removes unused imports but adds any missing ones, resolves ambiguous references and consolidates the import statements
    Thanks,
    Guriya

  • Can't render,  can't save project - under deadline!

    I am working a project that has been going swimmingly for days. Suddenly it's all gone downhill on the day it is supposed to be submitted.
    Here are the pieces of the puzzle that I have found so far:
    1) I cannot save the project. The message I get says "File error: a file of this name already exists
    2) When I try to circumvent that by renaming the project and using "Save project as" I get "General error" with no number to identify it
    3) The autosave gets an "access denied" error
    4) Nothing will render. Everything is checked in the pull-down menu, preferences trashed, etc. I ran through every fix I could find in these discussions, as they have saved me many times before, but nothing will get it to render. The progress bar flashes up for a split second then disappears.
    Any help would be much appreciated! This thing is due in two hours!
    Thanks,
    JT

    This might not work but it's worth a shot. Keep your project open and start a new project. Copy everything in your browser from the current project to the new project and then see if you can save the new project with a different name. This has worked for me in the past on projects that just seem to get corrupted somehow.
    Have you recently changed permissions for anything? May want to do a 'Get Info" in Finder on your project file, render location, etc. to make sure you have proper permissions to those locations.

  • I tried exporting my film, but it wouldn't export. So, then I tried rendering all of the clips. However, as soon as I did that, it said that the project itself was offline. Yet when you go into the actual project itself, you can play the whole timeline.

    I tried exporting my film, but it wouldn't export. So, then I tried rendering all of the clips. However, as soon as I did that, it said that the project itself was offline. Yet when you go into the actual project itself, you can play the whole timeline back and there aren't any clips showing that the media is offline. Does anyone have any solutions?

    What version is FCPX and what version is your OS?
    How are you exporting and with what preset?
    Luckyl1987 wrote:
    However, as soon as I did that, it said that the project itself was offline. Yet when you go into the actual project itself, you can play the whole timeline back and there aren't any clips showing that the media is offline. Does anyone have any solutions?
    No idea about that.. Can yu post a sreen shot of the error message?
    Russ

  • Every time FCPX starts I have to render my project

    I experience a really awful problem...
    Every time I start my project I have to re-render the whole timeline.
    I'm using the latest version of everything, also from the CoreMelt plug-in I'm using in this project.
    As long as the project is short this doesn't happen, but after 2 minutes project lenght this happens all the time.
    I have 64 GB RAM so this should not be the problem.
    The plugin developer stated that this is a FCPX background rendering problem, but when I switch it off it's not getting better.
    Then I have to render it manually, before I can edit/watch the project.
    I have one of the fastest MaPro's available 12 core and I work on a SSD-RAID0 with highest Data-Rates...
    So what is the problem and how to solve this??

    wolfgang,
    does this happen if you delete the coremelt fx from the clips ?
    I have never had this problem. But I did demo the coremelt plugs and they gave me nothing but H++++
    Not saying they are the culprit... But if FCPx was at fault I think we'd be hearing more of it...
    Try creating a fresh project with no core melt of other effects in it but with the same clips.. Then render the timeline. Quit FCPx and relaunch and see if the problem persists...
    If it does
    Try deleting
    /Users/YourFolder/Library/Caches/ EVERYTHING FCPx
    /Users/YourFolder/Library/Preferences/ EVERYTHING FCPx
    Reboot with shift held.. Then log it.. Then reboot normally

  • Two months of  Premiere Pro - two major Errors that stopped the whole project

    I have switched from FCP - and I am quite dissappointed.
    Within two months I have experienced two major errors that stopped the whole project. Something like that never happened to me in 15 years of AVID an FCP. -
    1. Err msg. "Project contains sequences that cannot be opened" - No way to open the project at all after two weeks of working on it.
    2. Err msg. "A Low-level exception occurred in: Adobe Player" - No way to play back the sequence at all. Had to be finnished in FCP.
    Apart from that Premiere keeps loosing Render Files and does not recognize my USB-audio-device.
    Can anyone help me (tech support) PLEASE?
    Am I the only one with problems like that?
    - Thinking about switching to MC7.
    CS6
    OS 10.8.2.
    imac 3.1 Ghz corei7
    16 GB Ram

    You specify "CS6," but do not indicate whether you have patched to the latest. If you haven't please do so.
    Any time I hear "crash on launch" (or words to that effect), my first thought is that something in the preferences may be tripping up the app. You can clear the prefs by holding Shift+Option while launching the app--keep the keys pressed until PPRO finishes launching. If you've invested time customizing your prefs and want to be able to revert to them in case they weren't the cause of the problem, then you can manually move or rename them; let us know if you need help finding them.
    Other possible culprits, in the order that I recommend proceeding:
    If the crash occurs only when you launch directly into a particular project, then naturally that project is most likely the cause.
    Drivers, especially for graphics card: update them (on Mac, that means updating OSX)
    third party codecs: uninstall them
    third party hardware: first update drivers. If that doesn't help, disconnect or disable the hardware

  • "Unknown Error" all the time, every time on render of project, any codec

    Trying to render a feature length documentary for a film festival (ie.. I don't have time for this). The project timeline runs 1 hour and 20 minutes. If I try and export or queue the timeline in media encoder to h.264, QuickTime or Select "Match Sequence Settings" as my output format, the media encoder fails to render with the very informative "UNKNOW ERROR" every time at random point in the render procedure. When rendering it as an mpeg once, I am able to see one place where it crashed. It is a place in the timeline where the are no transition, not cuts, no overlays, absolutely nothing out of the ordinary. Yet, it crashed there this time. Next time, it will crash elsewhere.
    I am trying to render the timeline on segment at a time. So far, each smaller segment of 20 minute blocks seems to be rending just fine and goes past the points where other renders failed. Looks like Media Encoder can't handle large projects.
    Here's all the requested information for a complete diagnosis of the problem.
    Error given to me by Media Encoder : "Unknown Error" --that's it. The time rendered varies between 43 minutes and 3 hours.
    - Encoding Time: 00:54:04
    05/03/2015 05:59:03 PM : Encoding Failed
    Export Error
    Error compiling movie.
    Unknown error.
    Adobe Premiere Pro CC 8.1 Caravan
    2014.2 Release
    8.2.0 (65) Build
    OS X 10.10.3 (14D136)
    iMac (27-inch, Mid 2011)
    3.4 GHz Intel Core i7
    24 GB 1333 MHz DDR3
    AMD Radeon HD 6970M 2048 MB
    I'm right handed, my favorite color is blue, the computer is on the Eastern TimeZone
    I need this timeline rendered and I'm not interested becoming a forensic-level technical authority on Premiere to get it. This problem has come and gone now for months and is intolerable. I pay for software and I expect it to work, and at least give me something more useful than "UNKNOW ERROR." There is no such thing. As a former developer, I can say with authority that simply dumping to a message that says this is lazy and sloppy programming. Buffer underruns, stack overflows..whatever. Everything is caused by something. I can't begin to diagnose this problem unless Adobe provides software error handing that gives me some idea of what happens. Where did it happen in the timeline? What routine/subroutine gave the error? Was it a codec error? Come on....these things are not unknowable.
    Adobe, PLEASE stop coming out with new features when you can't make your existing pay by the month software reliable! Maybe FCPX is worth another look.

    UPDATE:
    tried rending the entire project as Quicktime ProRes 422 (since that is what clips were recorded in originally anyway) and Media Encoder gto 89% complete....and the entire application CRASHED. WHO-HOO! Way to go, Adobe!!!!!
    Here's part of the crash report if it means anything. Maybe I'll try it again and see if anything changes! Can't get any worse.
    Process:               Adobe Media Encoder CC 2014 [864]
    Path:                  /Applications/Adobe Media Encoder CC 2014/Adobe Media Encoder CC 2014.app/Contents/MacOS/Adobe Media Encoder CC 2014
    Identifier:            com.adobe.dynamiclinkmanager.application
    Version:               8.2.0.54 (8.2.0)
    Code Type:             X86-64 (Native)
    Parent Process:        dynamiclinkmanager [826]
    Responsible:           dynamiclinkmanager [826]
    User ID:               502
    Date/Time:             2015-05-03 20:05:05.829 -0400
    OS Version:            Mac OS X 10.10.3 (14D136)
    Report Version:        11
    Anonymous UUID:        5CCC287C-7B70-E4F9-D0E8-4180FB0681CC
    Sleep/Wake UUID:       0ED73954-6C5A-4CCE-B807-974B71171E95
    Time Awake Since Boot: 33000 seconds
    Crashed Thread:        0  Dispatch queue: com.apple.main-thread
    Exception Type:        EXC_CRASH (SIGBUS)
    Exception Codes:       0x0000000000000000, 0x0000000000000000
    Thread 0 Crashed:: Dispatch queue: com.apple.main-thread
    0   libsystem_kernel.dylib         0x00007fff94c8d4de mach_msg_trap + 10
    1   libsystem_kernel.dylib         0x00007fff94c8c64f mach_msg + 55
    2   com.apple.CoreFoundation       0x00007fff94955eb4 __CFRunLoopServiceMachPort + 212
    3   com.apple.CoreFoundation       0x00007fff9495537b __CFRunLoopRun + 1371
    4   com.apple.CoreFoundation       0x00007fff94954bd8 CFRunLoopRunSpecific + 296
    5   com.apple.HIToolbox           0x00007fff8ab7256f RunCurrentEventLoopInMode + 235
    6   com.apple.HIToolbox           0x00007fff8ab722ea ReceiveNextEventCommon + 431
    7   com.apple.HIToolbox           0x00007fff8ab7212b _BlockUntilNextEventMatchingListInModeWithFilter + 71
    8   com.apple.AppKit               0x00007fff8c8fe9bb _DPSNextEvent + 978
    9   com.apple.AppKit               0x00007fff8c8fdf68 -[NSApplication nextEventMatchingMask:untilDate:inMode:dequeue:] + 346
    10  com.apple.AppKit               0x00007fff8c8f3bf3 -[NSApplication run] + 594
    11  com.adobe.exo.framework       0x00000001057f3a88 exo::app::OS_AppBase::RunEventLoop() + 56
    12  com.adobe.ame.application     0x00000001000195c1 AME::RunTheApp(exo::app::AppInitArgs&, std::vector<std::basic_string<unsigned short, std::char_traits<unsigned short>, dvacore::utility::SmallBlockAllocator::STLAllocator<unsigned short> >, std::allocator<std::basic_string<unsigned short, std::char_traits<unsigned short>, dvacore::utility::SmallBlockAllocator::STLAllocator<unsigned short> > > >&) + 11809
    13  com.adobe.ame.application     0x0000000100049ba8 main + 440
    14  com.adobe.ame.application     0x0000000100003e34 start + 52

  • Old Logic + a new Mac = can't open old projects anymore. De/re-install?

    Hi everybody,
    maybe someone can advise me with this problem:
    I bought a new Mac recently, did install a fresh OSX 10.5 and then used migration assistant to transfer my old user account from my old Mac (10.4), incl. all files. It did take a night, but it worked - or so I thought. Actually all applications work as they should, except for Logic. I had to re-authorize a few plug-ins, but then all seemed to be cool. I can open a new project, record audio, midi, add plug-ins, all cool. But I ended up with 3 problems, which are really annoying:
    1) EXS24 couldn't find most of the samples anymore. Most, not all. I have 4 internal HDs, one for the system, one for audio recordings, one for samples, one for "other stuff". 2 of these disks came from the old Mac, 2 new ones, content copied from old Mac. In the EXS prefs I set "search for samples" to "all volumes", but it still didn't work perfectly. Finally I bought EXSManager Pro and now it seems to work again. I didn't try ALL samples yet, but the +/- 20 EXS instruments I tried, did load all samples.
    2) Space Designer doesn't load impulse responses for the presets anymore. They're there and at the right place. I can load SD and import an existing impulse file, no problem. But the presets don't find the required files anymore.
    3) Now - and this is the worst one - I can't open old projects anymore. I just can't. It starts loading, I see the rainbow thing (don't know the right word), it turns black & white and that's it. You can watch this forever and nothing happens.
    Regarding all 3 issues:
    I don't get any error messages. Logic doesn't crash, I can't click 'apple-.' to stop loading/searching. It just doesn't open the file. I had a coffee, a pizza, I let it try for 2 hrs+, but neither did it load a SD preset or an old song file. All I can do is manually quit Logic.
    But when I open Logic with the CTRL-button down and click "no" to core audio I can open all songs. Of course I can not hear a tone then, but it's all there. Opening a song takes 3 secs then. I tried to safe a song then with a different name, re-started Logic with core audio but same result. It get's "stuck".
    Of course I checked user permissions and all the usual trouble shooting clicks, but still Logic has a mind of it's own. I installed a 2nd user with admin rights, though still the same, plus all the 3rd party plug-ins refusing to work.
    Now I was thinking, should I de-install Logic and re-install from the original CDs maybe. And if so, is there anything special I have to take care of? Like manually removing any prefs or cache files?
    Or completely re-install the whole Mac? (pleeease no....)...
    If anybody has any idea, it'd be highly appreciated.
    Thank you in advance and for the energy to read my little novel here,
    cheers,
    Joern

    Ok, either my question was too long or nobody seems to have an answer. Sad, either way
    Here's something I found out in the meantime, maybe this is interesting for somebody or maybe - problem's not totally solved - enough info for any of you to give me further advice.
    When I start Logic Core Audio driver de-activated, I can open old songs. Then I save them in a new folder with all audio files and a new name. And I remove all EXS24 instruments as well as the Space Designer. I quit Logic, re-open with Core Audio activated and I can open the song.
    Problem no.1: EXS24 instruments don't find the appropriate samples, but EXSMananger Pro did help me with this. Same problem with Space Designer, which doesn't find the impulse responses, connected to a certain preset.
    Two questions, every idea would be great!
    - Is there any way to teach Space Designer Presets where to look for impulse respones. I can load IR samples directly and create a new preset, but I can't use my old ones.
    - Is it possible to install Logic from scratch over an existing version? Or how should I de-install everything connected with Logic and then install a fresh version from CD?
    Thank you again,
    Joern

  • Is there a way to make an audio clip not cover the whole project? I want to add audio clip or song and let it start at a certain point in the project. I'm working with iMovie on IPad!

    Is there a way to make an audio clip not cover the whole project in iMovie? I want to add audio clip or song and let it start at a certain point in the project. Whenever I add audio or song it covers the whole project. I'm working with iMovie on IPad!

    Thank you for your reply Karsten but unfortunately this didn't help me so far. Or maybe I'm missing something?
    First the link is a tutorial for iMovie on a Mac. I'm using iMovie on iPad so the steps are inapplicable.
    Second it is only possible for me to manipulate the end part of the sound clip to whichever duration I want. But I can't do the same with the 'beginning' of the sound clip.
    I simply want to place some photos in the beginning of my video with no sound in the background then after like 2 secs I want to start the music clip. For some reason that is not possible! Cause every time I drop the music clip unto my project timeline it automatically place it self along with the first frame in the project! And consequently the photos and music are forced to start together.
    Hope I'm making sense...

  • Can I Open RH5 project file in RH10?

    I don't like registration of all kinds until I took an RH arrow in the knee. XDD
    Here's my scenario:
    My colleague created a project in RH5 long time ago and now she's handing over the project to me.
    I copied the whole robo source files folder to my local disk and tried to open it in RH10. Then error saying .cpd file might be corrupt so that RH cannot load the data from the database. I know .cpd file is the cache file for a RH project, right? It's created/overwritten every time you open the RH project. Then I figured, maybe I should delete the .cpd file(as it might be created in RH5 in her machine) before I open it in RH10?
    Also, I've tried to open the same project file in RH5(I have RH5 and RH10 installed in the same OS:Win 7). It worked for the first time, with lots of errors of broken links and reference links but failed for the second time, right after I opened that project in RH10. (You might will want to doubt if RH5 is executable in Win 7, I thought it should be but it turned out it is, which is amazing...)
    So..here're the questions:
    1. Do RH5 and RH10 coexist in Win 7?  Some said they don't..
    2. Should I delete the .cpd file created in lower version of RH before I open the project created in RH of lower version(say, RH5) in RH of higher version(in this case, RH10)?
    3. Can RH10 open the project created in RH5? I know the project created in RH of lower version will be converted in some way when it's opened in RH of higher version. Anyone practiced this successfully?
    Thank you!

    It proves that X5 can be opened. It does not prove it will work properly in all respects. Also webhelp will likely have issues with some browsers. In other words and to answer your question, both can be on the same machine but that does not mean both will work as designed.
    Rh8 could be used with Windows 7 when Rh8 was released, except bits broke until it was patched so the chances of X5 are rather low.
    MS Access is not needed on your machine as the CPD is a runtime database. There's no point messing with it, leave Rh to recreate it.
    See www.grainge.org for RoboHelp and Authoring tips
    @petergrainge

Maybe you are looking for