Can't replicate datasources in BI 7.0 IDES DEMO

Hi,
I recently installed an IDES DEMO ECC 6 and BI, all modules work perfectly fine in ERP side, I was able to properly configure initial BI set up as well, but every time I tried to check the Data Sources (in RSA1), a message pops up as below:
"There is no application component hierarchy in BW for source system. Do you want to replicate the application component hierarchy now?". --After clicking on YES it shows at the bottom (Application Component Hierarchy for Logsys "T90CLNT090" does not exist).
Within Data Warehousing Workbench: Modelling (RSA1)- Clicked Source Systems then on the right panel I tried Restore, Activate, Replicate DataSources- it appears "Could not activate source system T90CLNT090" at the bottom.
Seems this is a RFC issue which I am not very familiar with. I tried SM59 and Connection Test for T90CLNT090 came with an error.
I need help to resolve this issue and any advice would be greatly appreciated.
Sadique

Hi,
Ok. Isuue seems to be both the hostname and user id. Check whether the hostname in the connection is what your basis guys have assigned to the system.
Can you do the following additionally:
1. Create a new connection.
2. Enter the connection type as 3
3. In the technical settings tab, in the field target host, enter the IP address of the IDES source system and the system number. These should be correct (you can check the connection details of the ides details from the Logon pad, where you logon into the IDES system).
When you hit enter, then the host name should be determined automatically, which would indicate the system has been set up correctly.
4. Go into the logon and security tab. Enter the language, client and user id and password. The user id should exist in the source system and the password should be correct. You should test by logging into the source system using this login id and pw in Dialog.
5. In the unicode and MDMP tab, select whether the source system is unicode or nonunicode.
6. Save your connection
7. Do a connection test, if it works, then do an authorisation test using the menu option: Utilities --> test --> Authorisation test.
Revert with what happens.
Cheers...

Similar Messages

How to replicate datasource to PRD System created in BW System (DEV)

Hi Experts,
I created one datasource (based on infoset) in BW so as to extract the data from the table to ODS. Now, i have to replicate it to PRD system.
How can i do it?
Regards,
Pablo Moraes

Hi,
Go to RSA1, Source System, Right click on the Source System name for eg BWP100 and DataSource Overview, go to the respective application component or find your datasource with its tech name and right click on the appl comp and replicate datasource once it is done then go to SE38 tcode and run RS_TRANSTRU_ACTIVATE_ALL and give your InfoSource name there and execute. Then you are good to go with the loads.
Hope that helps!!
~ Vaishnav

Replicate datasource from SRM source system

Hi,
I need to replicate datasource from SRM source system I am able to see datasource under application component in RSA6 when I tried to replicate those component In BI by selecting Replicate Tree Metadata I am not able to see any application component in RSA1 .
Thanks,
Senthil

Hi Senthil,
i know your issue. the problem is when you are going to do replication in first time you dont find any application components.
so what you have to do is go to the BI SYSTEM and go to your SRM Source system and select and right click and select Replicate Datasources.
if you are doing first time replication it takes a quite long time.
so once its replicated then u will b able to see the datasources as well as the corresponding application components.
next time in SRM if you enhance the datasource you can directly select the datasource and right click say replicate metadata.
once solved get back to me
HOPE THIS HELPS YOU
regards
vadlamudi

Replicate DataSource, no more memory space available

RSA5, select too much DataSource.
got runtime error when replicate DataSource. How can I change this situation without change SAP basis parameters?
The current program had to be terminated because of an
error when installing the R/3 System.
The program had already requested 934756096 bytes from the operating
system with 'malloc' when the operating system reported after a
further memory request that there was no more memory space
available.

Hi,
You install one by one in RSA5 and replocate one by one Application component wise in BW. also check the Table Space in system ask basis team to chekc the size of the database and see the log files in OS/DB level.
Thanks
Reddy

Can we replicate table data from R/3 to BI

Hi All
I have a tablke called JEST which captures status(OBJNR) from VBAP table. We have same table available in BW also. My question is can we replicate data from R/3 to BW for this table. Since this table in BW is not being loaded.
My requirement is to display the status OBJNR in BW
Can anyone advice.

Hello Vani,
Replication of data in some tables from ECC to BW is possiable. Data in tables like T00* (Currency conversion, unit etc ) is replicated into BW from ECC. I think we could also replicate data in table JEST. Please consult your BASIS team, they could do it for you.
If your requirement is to display the status OBJNR in BW, one good way is to create InfoObject Object Number, with attributes Object Status, Indicator & Change number. Data can then be loaded in BW using a Generic master datasource based on DataBase table JEST. Or enhance a Datasource to include OBJNR.
Please let me know if you need any more information.
Regards,
Pankaj

Schedule replicate DataSource for background-job

Dear all,
I want to schedule replicate one DataSource just after automatically transporting today in the evening. Does anybody know the job (SE38) which is used for replicate DataSource so that I can execute this in the background later in the day?
Thanks.
Regards
Daniel

Hi
You can capture the replication step in a transport request and release it wen ur R3 request is gone. See the links below.
Re: DataSource Replication Problem
DATASOURCE REPLICA
Hope this helps
Gaurav

Transport Error: Cannot replicate datasource

Hello Experts,
I am trying to transport some requests from the dev to the the testing client. We have been facing a lot of errors while transporting which have all been fixed.
But we are still getting one error, viz.
' Start of the after-import method RS_ISFS_AFTER_IMPORT for object type(s) ISFS (Activation Mode)
Cannot replicate DataSource'
Please help me with this issue.
Regards,
Prince

Hi,
As per the error message it appears that the datasource needs to be replicated in the target system of the transport. Please go to RSA1 in the
Target BI system, select the source system that the datasource belongs to under the heading 'source systems, if you right click on the relevant
source system there should be an option 'Datasource preview', if you click on this option you can then search for your datasource and right click on the
datasource to replicate it. If you expand the error log for the failed transport/import in the target system you can find the technical name of the datasource.
When you have this done please try the transport again.
Best Regards,
Des.

Can not connect datasource in weblogic server

I have written a test class. I create datasource in weblogic server 11g(datasource name =fdbusionline jndi name = 'jdbc/fdbusionline' ) and start weblogic server. but always report the following error:
javax.naming.NameNotFoundException: Unable to resolve 'fdbusionline'. Resolved '' [Root exception is javax.naming.NameNotFoundException: Unable to resolve 'fdbusionline'. Resolved '']; remaining name 'fdbusionline'
at weblogic.rjvm.ResponseImpl.unmarshalReturn(ResponseImpl.java:234)
at weblogic.rmi.cluster.ClusterableRemoteRef.invoke(ClusterableRemoteRef.java:348)
at weblogic.rmi.cluster.ClusterableRemoteRef.invoke(ClusterableRemoteRef.java:259)
at weblogic.jndi.internal.ServerNamingNode_1035_WLStub.lookup(Unknown Source)
at weblogic.jndi.internal.WLContextImpl.lookup(WLContextImpl.java:423)
at weblogic.jndi.internal.WLContextImpl.lookup(WLContextImpl.java:411)
at com.fd.busionline.test.appinterface.impl.DataSourceTest.testConnectDataSource(DataSourceTest.java:54)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.junit.runners.model.FrameworkMethod$1.runReflectiveCall(FrameworkMethod.java:44)
at org.junit.internal.runners.model.ReflectiveCallable.run(ReflectiveCallable.java:15)
at org.junit.runners.model.FrameworkMethod.invokeExplosively(FrameworkMethod.java:41)
at org.junit.internal.runners.statements.InvokeMethod.evaluate(InvokeMethod.java:20)
at org.junit.internal.runners.statements.RunBefores.evaluate(RunBefores.java:28)
at org.junit.internal.runners.statements.RunAfters.evaluate(RunAfters.java:31)
at org.junit.runners.BlockJUnit4ClassRunner.runChild(BlockJUnit4ClassRunner.java:73)
at org.junit.runners.BlockJUnit4ClassRunner.runChild(BlockJUnit4ClassRunner.java:46)
at org.junit.runners.ParentRunner.runChildren(ParentRunner.java:180)
at org.junit.runners.ParentRunner.access$000(ParentRunner.java:41)
at org.junit.runners.ParentRunner$1.evaluate(ParentRunner.java:173)
at org.junit.internal.runners.statements.RunBefores.evaluate(RunBefores.java:28)
at org.junit.internal.runners.statements.RunAfters.evaluate(RunAfters.java:31)
at org.junit.runners.ParentRunner.run(ParentRunner.java:220)
at oracle.jdevimpl.junit.runner.junit4.JUnit4Testable.run(JUnit4Testable.java:24)
at oracle.jdevimpl.junit.runner.TestExecution.run(TestExecution.java:27)
at oracle.jdevimpl.junit.runner.JUnitTestRunner.main(JUnitTestRunner.java:88)
Caused by: javax.naming.NameNotFoundException: Unable to resolve 'fdbusionline'. Resolved ''
at weblogic.jndi.internal.BasicNamingNode.newNameNotFoundException(BasicNamingNode.java:1139)
at weblogic.jndi.internal.BasicNamingNode.lookupHere(BasicNamingNode.java:252)
at weblogic.jndi.internal.ServerNamingNode.lookupHere(ServerNamingNode.java:182)
at weblogic.jndi.internal.BasicNamingNode.lookup(BasicNamingNode.java:206)
at weblogic.jndi.internal.RootNamingNode_WLSkel.invoke(Unknown Source)
at weblogic.rmi.internal.BasicServerRef.invoke(BasicServerRef.java:667)
at weblogic.rmi.cluster.ClusterableServerRef.invoke(ClusterableServerRef.java:230)
at weblogic.rmi.internal.BasicServerRef$1.run(BasicServerRef.java:522)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:146)
at weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.java:518)
at weblogic.rmi.internal.wls.WLSExecuteRequest.run(WLSExecuteRequest.java:118)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
@test
public void testConnectDataSource(){
Connection conn = null;
Context ctx = null;
try{
// Hashtable env = new Hashtable();
// env.put(Context.INITIAL_CONTEXT_FACTORY, "weblogic.jndi.WLInitialContextFactory");
// env.put(Context.PROVIDER_URL, "t3://localhost:7001");
// env.put(InitialContext.SECURITY_PRINCIPAL, "weblogic");
// env.put(InitialContext.SECURITY_CREDENTIALS, "!QAZ2wsx");
Environment env=new Environment();
env.setProviderUrl("t3://localhost:7001");
env.setSecurityPrincipal("weblogic");
env.setSecurityCredentials("!QAZ2wsx");
ctx = new InitialContext();
ctx=env.getInitialContext();
Object obj = ctx.lookup("fdbusionline");// can not work
Object obj = ctx.lookup("jdbc/fdbusionline"); // can not work
DataSource ds = (DataSource) PortableRemoteObject.narrow(obj, DataSource.class);
conn = ds.getConnection();
Statement stmt = conn.createStatement();
String sql = "select sysdate from dual";
ResultSet rs = stmt.executeQuery(sql);
while (rs.next()) {
System.out.println(rs.getDate(1));
} catch (Exception e) {
e.printStackTrace();
}finally{
System.out.println("Test Datasource Connection");
who can help me? Any help will be appreciated greatly

Okay, but are you sure that the datasource is actually deployed? Does the server log or the management interface of weblogic actually report that the datasource was deployed succesfully under the name you specify? And did you double check if you don't have any name mismatches (such as a typo or an upper/lowercase mismatch)?
I ask because the connection to the server appears to be working, but the lookup of the name gives no results - the only thing I can think of is that the resource really is not deployed even if you believe it is.
A few observations:
- you may want to put your JNDI credentials in a jndi.properties file in the root of the classpath in stead of hardcoding them (but you may hardcode for now as a quick test of course)
- the correct lookup should be to "jdbc/fdbusionline", in other words you use the jndi-name.
ctx = new InitialContext();
ctx=env.getInitialContext();the env.getInitialContext() really is not necessary, I would remove it.

Can I replicate to a off-site DR Hyper-V site and ASR?

Hi,
I've had a troll around the various sites but I can find a definitive answer.
Am I correct in saying that I can only replicate to one location i.e. offsite DR Hyper-V server OR Azure Site Recovery?
Rob

Thanks for the replies. To confirm that I am using Windows Server 2012R2 and I am using the Hyper-V Manager to manage the replication. I've set up replication to a DR site and that is working perfectly. The bit I seem to be missing is the
next step. If I try and extend the replica I don't get any Azure options? I just get the option to browse the network. Do I have to do something here or am I not seeing the right screen? if someone has a screenshot of the screen I should be seeing that
would be very useful.
Cheers
Rob

Batch program to replicate DataSources in process chains

Hi everybody,
I am looking for a batch program to replicate DataSoruces in a BW 3.5 system. I would like to use this program at the beginning of process chains, in order to avoid any potential problems from transports into productive environment.
I found the following program already but it seems not to work: RSAOS_METADATA_UPLOAD_BATCH
thanks in advance for any help
Ulrich

Hi John
thanks for the hint. Of course you are right. I would expect to have also a transport in BW. It happend unfortunately several times, that not only the involved DataSource got inactivated in our complex data model, but also other ones.
That's why I look simply for the program that replicates DataSources. I tried already with tracing in via SM30 - unfortunately no useful results
regards,
Ulrich

PDF Render Garbles Text, but I can't replicate

An acquaintance contacted me and told me that PDFs on my job market website aren't displaying correct. He sent a screenshot, so I know what he is looking at:
http://bensresearch.com/downloads/FF.png
(The PDF he is viewing is http://bensresearch.com/downloads/CV.pdf )
This is my job market site, so I want to make sure anyone can read the PDFs. However, I can't replicate it. I've tried to replicate it on Windows 7 & 8, Mac, with no joy. The built in PDF render in version 24 seems to read the pdf file fine. (I asked him what version he is running and he said version 24 on Windows 7 Enterprise).
Any ideas?
Thanks!

Here is some troubleshooting information about my computer system.

How can we replicate UOM from ECC to SRM.

Hi ,
In ECC I have assign ISO code against the UOM.
I have replicate ISO code from ECC to SRM. But unable replicate UOM.
How can we replicate UOM from ECC to SRM?
Thanks with regards
Sachin

Hi Sachin,
UOM are uploaded in SRM through object DNL_CUST_BASIS3. It's part of master data replication.
You should refer following link, it will give you idea how to load mentioned object in SRM:
MASTER DATA REPLICATION: SETTINGS
I hope it helps.
Regards,

Can't replicate vendors from ECC

Hi,
We are setting up a new EBP environment where I can't replicate vendors from ECC to SRM via BBPGETVD. In the application log I get the error message no BBP_VENR005. It says that there is an error in the PD-org structure; only one organizational unit permitted per beckend - purchase org.
I have of course specified the backend system as well as the purchase organization.
We have created a root and one node in the org structure of the vendors.
Can anybody help with this issue?
Best Regards
Ulf Gewers

Hi
Did you influence any error message there BBP_VENR ?
or Are now the vendor is available in PPOSV_BBP ?
red or yellow in slg1.Did you select internal no range or r/3 number range.
Are you transfering from multiple backend sytem with srm.
Hope that your organisation is consistent with green.
regards
Muthu
Edited by: Muthuraman Govindasamy on Sep 29, 2008 11:59 AM

Can anyone replicate this JSTL problem?

The following code fails in tomcat 6:
<c:if test="${not empty requestScope.form && not empty requestScope.form.result}">
</c:if>but this one works fine:
<c:if test="${not empty requestScope['form'] && not empty requestScope['form.result']}">
</c:if>

I can't replicate the problem easily.
The tiles exception is potentially hiding the real exception. Check your logs for a root cause.
I presume "result" is actually an attribute of your "form" object which is an attribute in request scope?
Here is a test page that I threw together. It should compile and run as is.
All three scenarios work - where both form and result are present, when just form is present and result is null, and when both are null.
I would probably go looking into your Form and Result objects.
<%@ page language="java" contentType="text/html; charset=ISO-8859-1"
    pageEncoding="ISO-8859-1"%>
<%@ taglib prefix="c" uri="http://java.sun.com/jsp/jstl/core"%>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
<html>
<head>
<meta http-equiv="Content-Type" content="text/html; charset=ISO-8859-1">
<title>Eclipse Java Test Page</title>
</head>
<body>
<h1>Test page</h1>
<h2> Server Info </h2>
Server info = <%= application.getServerInfo() %> <br>
Servlet engine version = <%= application.getMajorVersion() %>.<%= application.getMinorVersion() %><br>
JSP version = <%= JspFactory.getDefaultFactory().getEngineInfo().getSpecificationVersion() %> <br>
Java version = <%= System.getProperty("java.vm.version") %><br>
Java home = <%= System.getProperty("java.home") %><br>
Session id = <%= session.getId() %><br>
<%!
public class Wrapper{
    String result = null;;
    public String getResult(){
      return result;
    public void setResult(String result) {
      this.result = result;
%>
<%
    Wrapper form = new Wrapper();
    form.setResult("Hello!");
    Wrapper form2 = new Wrapper();
    request.setAttribute("form", form);
    request.setAttribute("form2", form2);
%>
    <h2>form</h2>
    <c:out value="${not empty requestScope.form }"/><br>
    <c:out value="${not empty requestScope.form.result }"/><br>
    <c:if test="${not empty requestScope.form && not empty requestScope.form.result }">And == true</c:if><br>
    <h2>form2</h2>
    <c:out value="${not empty requestScope.form2 }"/><br>
    <c:out value="${not empty requestScope.form2.result }"/><br>
    <c:if test="${not empty requestScope.form2 && not empty requestScope.form2.result }">And == true</c:if><br>
    <h2>form3</h2>
    <c:out value="${not empty requestScope.form3 }"/><br>
    <c:out value="${not empty requestScope.form3.result }"/><br>
    <c:if test="${not empty requestScope.form3 && not empty requestScope.form3.result }">And == true</c:if><br>
</body>
</html>

BLOB can not replicate on Network.

Can not replicate BLOB on the Network.
Here is my table script and Trigger Code.
create table StoredImages
( imageid number,
imagecontainer blob);
create table copy_StoredImages
as select * from StoredImages;
CREATE OR REPLACE TRIGGER "REPLICATE_storedImage"
AFTER INSERT OR DELETE OR UPDATE
OF imageid ON StoredImages
REFERENCING NEW AS N OLD AS O
FOR EACH ROW
BEGIN
IF INSERTING THEN
INSERT INTO COPY_StoredImages@DB_LINK (imageid, imagecontainer)
VALUES (:N.imageid, :N.imagecontainer);
ELSIF UPDATING THEN
UPDATE COPY_StoredImages@DB_LINK
SET imageid = :N.imageid,
imagecontainer = :N.imagecontainer
WHERE imageid = :O.imageid;
ELSIF DELETING THEN
DELETE FROM COPY_StoredImages@DB_LILNK
WHERE imageid = :O.imageid;
END IF;
END;
I want to replicate BLOB (Picture) Data on the network. Through is database trigger i am trying to replicate the data in another database on the network.All data is replicated but picture data is not replicated. How can i do replicate picture data on the network.
Thanks.

thanks...but, HP was NO help. I am now thinking that the problem is Bonjour and not the printer. I have tried to open safari and bonjour to see my network devices and i can not connect to my tivo either. If you have any ideas, i would appreciate it. I will now see if there is a Bonjour discussion for more help. Thanks!!!

Can't replicate datasources in BI 7.0 IDES DEMO

Similar Messages

Maybe you are looking for