Can't reset a 1131AG AP
Hi,
I have 2 AP's that were once connected to the WCS server but have been sitting on the side for awhile. When I powered them up and tried to reset them to factory defaults via the Clear Cnfig option in WCS, i got the error "Command failed".
I also tried holding down the reset button on the AP's for 15 seconds but that didint seem to work either. I need to set a IP on that AP's for a new office using the lwap ap ip addrress command which i cant do at the moment.
I tried changing the ip via WCS but got the error "MIB access failed".
Thanks.
Hello Leo,
I am having the same problem, cant reset a 1131AG AP. I tried your advise of removing all files except the "rcv" image and rebooting to no avail. Also tried reseting with the mode button, but that too to no avail. Also, there is no global "config" command listed when in the "enable 15" mode. Here is an output of "sh ver" and "sh log".
AP0016.c7a0.b4d8# sh ver
Cisco IOS Software, C1130 Software (C1130-RCVK9W8-M), Version 12.3(7)JX, RELEASE SOFTWARE (fc3)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2005 by Cisco Systems, Inc.
Compiled Wed 24-Aug-05 10:57 by pwade
ROM: Bootstrap program is C1130 boot loader
BOOTLDR: C1130 Boot Loader (C1130-BOOT-M) Version 12.3(7)JA1, RELEASE SOFTWARE (fc1)
AP0016.c7a0.b4d8 uptime is 15 minutes
System returned to ROM by power-on
System image file is "flash:/c1130-rcvk9w8-mx/c1130-rcvk9w8-mx"
cisco AIR-LAP1131AG-A-K9 (PowerPCElvis) processor (revision A0) with 24566K/8192K bytes of memory.
Processor board ID FOC100320H2
PowerPCElvis CPU at 262Mhz, revision number 0x0950
Last reset from power-on
1 FastEthernet interface
32K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address: 00:16:C7:A0:B4:D8
Part Number : 73-8962-09
PCA Assembly Number : 800-24818-08
PCA Revision Number : A0
PCB Serial Number : FOC100320H2
Top Assembly Part Number : 800-25544-06
Top Assembly Serial Number : FTX1007T0DJ
Top Revision Number : A0
Product/Model Number : AIR-LAP1131AG-A-K9
Configuration register is 0xF
AP0016.c7a0.b4d8#sh log
Syslog logging: enabled (0 messages dropped, 3 messages rate-limited,
0 flushes, 0 overruns, xml disabled, filtering disabled)
Console logging: level debugging, 4 messages logged, xml disabled,
filtering disabled
Monitor logging: level debugging, 0 messages logged, xml disabled,
filtering disabled
Buffer logging: level debugging, 6 messages logged, xml disabled,
filtering disabled
Logging Exception size (4096 bytes)
Count and timestamp logging messages: disabled
Log Buffer (4096 bytes):
*Mar 1 00:00:05.577: %SYS-6-LOGGERSTART: Logger process started
*Mar 1 00:00:05.597: %SYS-5-RESTART: System restarted --
Cisco IOS Software, C1130 Software (C1130-RCVK9W8-M), Version 12.3(7)JX, RELEASE SOFTWARE (fc3)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2005 by Cisco Systems, Inc.
Compiled Wed 24-Aug-05 10:57 by pwade
*Mar 1 00:00:06.600: %LINK-3-UPDOWN: Interface FastEthernet0, changed state to up
*Mar 1 00:00:07.600: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0, changed state to down
*Mar 1 00:00:25.600: %LWAPP-5-CHANGED: LWAPP changed state to DISCOVERY
*Mar 1 00:01:06.634: %CDP_PD-4-POWER_OK: Full power - NON_CISCO-NO_CDP_RECEIVED inline power source
Any help would be appreciated.
Thanks,
Mike
Similar Messages
-
My old email account is disabled and I can't remember my itunes password - how can I reset my password or move $ to a new itunes/email account? It seems I must have mis-typed my account information because I can't answer the security questions correctly...
➡ https://iforgot.apple.com/
-
Every time I go to log in I cloud it tells me that my phone has reaches the maximum free account uses!!!!!!!!!!!!how can I reset this?????
Have you had a look at this?
iCloud: Mailbox size and message sending limits -
when i try to purchase something it asks me to enter my security questions but i dont remeber them how can i reset them?
Try here:
iTunes Store: My credit card's security code or zip code does not match my bank's records -
I forgot all of the answers to my security questions and when I set up my apple id I did not add a rescue email, I recently got a new iphone and I cannot purchase anything on it because it asks me to answer my security questions which i can't reset because I do not have a rescue email. what do I do?
this does not help. I have forgotten ALL of the answers to my security questions. I can NOT reset the answers to my security questions without answering two of the three security questions. The other way to reset the answers to these questions is for apple to send me an email on my rescue email addres which I DO NOT HAVE.
-
I am having a Startup problem. Someone comes on the screen with Open Firmware to Startup. How can I reset the PRAM myself to solve this problem?
Read these.
http://support.apple.com/kb/HT1431
http://reviews.cnet.com/8301-13727_7-10330118-263.html -
I've tried all that I know how to do. My power button quit working awhile ago so I use the Assistive Touch to lock my screen. Once my phone froze, the screen went black. The only thing I can do now on my phone is hold down the home key and Siri will beep but she says "not taking requests at this time, try again later." I can't reset my phone without the power key or the Assistive Touch button. I've tried plugging into iTunes to restore the phone but I get an error message to first go to Settings in my phone and turn off "find my iPhone." I can't do that either as nothing will come up on my screen.
Make sure iTunes is up to date and try again.
-
I went I to my phone and I tried to unlock my passcode but it did not let me in, how can I reset my lock passcode without plugging it onto the computer on iTunes, or restoring it or deleting any data ?
You don't. The only way to remove the passcode if forgotten is to restore the device. If you have a backup, you can restore to that last backup, but anything done since that last backup would be lost.Forgot passcode for your iPhone, iPad, or iPod touch, or your device is disabled - Apple Support
-
if i factory reset my ipod touch(5th gen), can i reset it to the option 'set up as a new ipod', and then i can just go into the app store/itunes store and log into my apple ID so i can just restore my music and apps and not icloud with photos, contacts, ect. and then later i can add contacts that i need/want instead of them restoring them from icloud?
The reason i asked this question is because i have been wondering this a lot ever since i got an exchange on this ipod (and ive only had it for a few weeks now) because my last ipod had a lot of problems. so after i restored my ipod with my computer/itunes, i downloaded apps that i wanted, and then when i went to the storage to see how much storage was left, it said 0 bytes. i was freaking out because i didnt know how that could be, i mean, cause like, that is impossible when i just 'purchased' it, that the space was full but i looked and all my pictures were on this ipod and i already put them on my computer so i dont need them anymore thats why i wanna reset it now so there is nothing on it so i can have more space for stuff to do and download on it.
it is updated to iOS 8 but that happened when i purchased it, so i didnt have a choice to update it even though i didnt want to update to iOS 8...
and i hope you understand my problem..
i would REALLY REALLY appreciate it if someone could tell me a solution to my problem!!! thank you so much!
-sierraHey Sierra, You can do just what you have stated. My question, what is your "other"? If it is over 1.5 GB you most likely have corrupt files. Doing a Restore to New, Factory restore should correct it. Just make sure you make a full backup of all information on your iPod to your computer before you restore, so you don't lose your stuff, contacts, videos, pictures, non-iTunes music, etc, use the cable and connect with your computer. Then, via cable, connect to your computer, run the Restore to new, don't use your backup. Treat this iPod as if it was your first one ever. When restore is done, set up and add what info you wish to install on this iPod. The music apps etc you purchased should be on your computer, if not you should be able to retrieve purchased apps and music from iTunes. Any music, videos, apps not purchased from iTunes will be lost to you if you do not save them to your computer or the cloud first. When your done, make a current Backup and you should good to go. Hope this helps. Good luck. Cheers.
-
I can't get Firefox to start at all. It won't even open so I can't reset it. Can you help?
Firefox has been my browser for the last 7 years and I have never had a problem with it. But over the weekend it crashed and now it just won't open. I've uninstalled and redownloaded it but it still won't open. I can't reset anything as I can't get into it. I'm not sure what recent updates or add ons I had.
I really want to continue using Firefox as it's a great browser but I need it to open. Please can you help?You can use the Profile Manager to create a new profile.
See "Creating a profile":
*https://support.mozilla.org/kb/profile-manager-create-and-remove-firefox-profiles
*http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Profile_issues
If the new profile works then you can transfer some files from an existing profile to the new profile, but be cautious not to copy corrupted files to avoid carrying over the problem.
*http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox -
I have a 3rd Generation ipod touch that is not recognized by itunes or my computer. My itunes works with other apple devices I own. I cannot reset the ipod touch and can never get to the screen where it is supposed to show a red battery to turn it off. I can't reset it. Have tried to use the suggestions on the apple site to no avail. Any suggestions ?
From my experience, the only way you're gonna get a PC afflicted with this disease to work with a 5th gen nano is to roll back to an earlier version of iTunes. Those affected have been exhausted by this ongoing issue. To update or not to update? And I always say never update unless you have to, and turn off all that auto update mess!
I have two core2duo lappies running 32b vista. My workflow dictates 32b fyi. One is acer aspire running itunes v 11.1 (.0.126), 5th gen nano was originally formatted and works just fine on this machine to this day. My other is the bigger badder lenovo thinkpad and the 5th gen will NOT mount using any version of itunes past 11.0 (.1.12) Windows mounts it just fine. itunes is not having it. no shirt no shoes no service.
I have both a 4th and 5th gen nano. The 4th gen works great on both machines, I even successfully tested it with the latest version (11.1.5) before subsequent deletion on the thinkpad! Weird huh? I think my next experiment might be to restore my 5th gen w/ a Mac and theeeeen plug it into PC itunez.
I'm at a loss on the thinkpad. Scanned for intruders. Cut the Lenovo bloat. Executed system and reg maintenance. Took down msconfig to a safe mode + itunes level to attempt to resolve possible sw conflicts but to no avail. NO NO NO. Every single dang port, every time on the thinkpad. Has me feeling like others might get the same treatment by the next itunes update. :|
So in summary for me:
5th gen nano and thinkpad are a NoGo on 11.1^ last working version for me = 11.0.1
5th gen nano is working on an acer aspire 11.1.0 but no way in the world am I updating
4th gen nano is kicking 5th gen nano's @zz so what would make me want to buy a new ipod? -
A computer illiterate friend created 3 accounts on his iPhone 5 but forgot the passwords. He can't reset the password as his yahoo address is no longer valid. Erasing the phone doesn't solve the issue as the Apple server identifies the hardware as registered. How to register the phone with Apple?
I helped him create a new email address and new iCloud account on my Mac but when we try to register the phone with Apple it says: Maximim accounts limit reached for this device. How can he register the phone? I read different threads and found out that only Apple care can do that. We're in Romania and don't know where to call. Any suggestions on how we fix this?When I checked the support site for Romania, you apparently don't have an Apple Care contact center. You "may" try calling the US Apple care number to verify the account and have the password reset sent to a different email address. 800-694-7466
-
I forgot My iCloud password, and i can not reset it as the system is not accepting the answer to the security questions and also the mail to my apple ID mail box is blocked, how can i reset my password for my apple ID.
Hello nmssns,
Thank you for contacting Apple Support Communities.
You can start with this article to reset your iCloud password. Depending on your exact circumstances, blocked email, forgot security questions, etc., there are links provided to guide you through those issues.
About Apple ID security questions
http://support.apple.com/kb/HT5665
Regards,
Jeff D. -
I am English but live in Spain, When I got my new Macbook Pro I set the language to English, so far so good. Then I stupidly set the keyboard to British when it is obviously a Spanish keyboard. How can I reset it to Spanish. Sorry cant find question mark
LizMaddock,
you can reset the input source to Spanish by selecting the Keyboard pane of System Preferences, selecting the Input Sources tab, and pressing the “+” button in the lower-left corner to select one of the Spanish input sources. The “Spanish – ISO” input source is most similar to the physical Spanish keyboard layout. -
Since
the latest iOS download iCloud keeps trying to verify my account as well as keeps trying to upgrade. I can't figure out how to stop it as I also don't know my password And can't reset the iCloud PW. Any suggestions?Welcome to the Apple community.
If you are unable to remember your password, security questions, don’t have access to your rescue address or are unable to reset your password for whatever reason, your only option is to contact Apple ID Support, upon speaking to an operator you should explain that your problem is related to your Apple ID, this way you will not be charged for assistance, even if you don’t have an AppleCare plan.
You will need to show patience with the procedure and be prepared to demonstrate without question that the account belongs to you. Don’t expect access to be restored immediately and if you aren’t the owner of the Apple ID registered to the device the account won’t be reset.
This is answer is provided from my own database of boilerplate responses and the content was last reviewed and/or tested on: 2014/12/18
Maybe you are looking for
-
Hi can anyone please help. My I Phone is in recovery mode. I have loads of pics and vids including my little girl counting to ten for the first time. Can I recover these files or have I lost them? I lost the phone last week and it was returned workin
-
Why won't my iPad 2 keep a wifi connection?
has anyone found a way to solve the ipad2 wi fi problem?
-
Apple Earbuds with remote mic/volume functions not working in Windows
So this is somewhat of a strange one. My new Macbook Pro early 2011 with a fresh copy of Windows 7 Pro with all latest updates (including the recent firmware and bootcamp releases) doesn't seem to see my Apple Earbuds with remote as a microphone and
-
Anyconnect SCEP Auto-enrollment Issue
Hello Everyone, I have been trying to configure cisco`s any connect client with SCEP Auto-enrollment with no success. I followed all the steps necessary to complete the configuration but still no success. What happens to me is, enrollment happens fin
-
How do I stop SMS tones from interrupting my call?
When I'm on a call ifi get an email or a text message the alert that I have assigned to it interrupts while I'm on the phone and I can't hear the person I'm talking to