Can't resolve .local address on Windows Vista 64 bit

I have Windows Vista 64 bit edition and installed Bonjour 64 bit.
From my Internet Explorer Bonjour toolbar, I can see my Bonjour device. However, when I try to connect to it, I get a DNS error.
Any suggestions? I've tried disabling firewalls and antivirus.

The problem appears to be in 32 bit programs. The 64 bit version of IE can resolve .local addresses, but 32 bit programs can't. I can map a network drive using the address as well.
Oddly, my version of Safari can "see" the .local device and lists it, but it can't connect because it can't actually resolve the address.

Similar Messages

  • Why can't I download iCloud for windows vista?

    I had a problem with the "famous" lastest iTunes update, so I erased every program that has anything to do with Apple, and now I need to install them all over again but my question is: How can I install iCloud on my windows vista computer if the say "windows 7 or 8 needed"?; and how can I get Mobile Me again??
    I feel so frustated
    Please HELP!!!
    Thank you....

    Download iCloud for Vista here: http://support.apple.com/kb/DL1687?viewlocale=en_US&locale=en_US
    MobileMe closed down more than a year ago, you can't get it back.

  • Why can't I install Itunes on windows vista 64 bit?

    Why can't I install Itunes on windows vista 64 bit? I have removed all apple software and repeated the reinstall many times but it fails.  I get this complicated error mesage and then the installer rolls back and fails.

    I get this complicated error mesage and then the installer rolls back and fails.
    I'd like to have a closer look at that error message please.
    Generate the error message again. While the error message box is open, hold down the Alt key and hit the PrtSc key. Paste the screenshot into an image file (using a program like Paint), and save the file.
    Start a reply here and click the wee camera icon at the top of the reply window. Click "Choose file", browse to the image file, select the file and click "Open". Now click "Insert file" to insert the screenshot into the reply.

  • How can I download itunes from my windows vista to my ipod original?

    How can I download itunes from my windows vista to my ipod classic?

    If you want to add songs from iTunes to the iPod, plug it into the computer, select the iPod in iTunes and click the tabs across top to select what you want on the iPod.

  • I can't open I tunes in Windows Vista "The procedure entry point ADAadPolicyEngine_DidEnterstation could not be located in the dynamic link library iADCore.dll

    I can't open I tunes in Windows Vista " I am recieving a entry point error. How do I get I tunes to open in Windows Vista with an error message 127?

    See iTunes launch errors caused by iAdCore.dll.
    Review the rest of the user tip if required.
    tt2

  • I have Photoshop Elements 4.0. Can I use it on a windows Vista based computer

    Q. I have Photoshop Elements 4.0. Can I use it on a windows Vista based computer.

    Mac OS Extended is not an OS, it is how the drive is formatted. This format will not work with a PC. If you reformat (erase) the drive with a PC format, it will work with a PC.

  • Programmat​ically changing the TCP/IP address of Windows Vista / 7 / 8

    Hi there!
    I'm pretty new to LabVIEW (started 2 months ago) and still have a long way ahead of me, so please forgive me if anything that I ask is too basic.
    I'm trying to change the IP properties of the PC via LabVIEW for some bigger software I'm working on.
    I can easily do it in Windows XP using the System Exec function to call cmd.exe and then use netsh commands, as previously explained for example here:
    https://forums.ni.com/t5/LabVIEW/Programmatically-​changing-the-IP-address-of-Win-XP/m-p/410533/highl​...
    https://forums.ni.com/t5/LabVIEW/Change-IP-number-​and-Subnet-mask-with-LabView/m-p/407536/highlight/​...
    http://forums.ni.com/t5/LabVIEW/How-to-change-the-​TCP-IP-settings-of-the-LAN-connection-from-LV/m-p/​...
    http://forums.ni.com/t5/LabVIEW/Change-the-compute​r-IP-address-in-LabVIEW/m-p/167481?query.id=108803​... ...
    But then, since I want to run my software in Windows 7 (& by extension to any Windows OS), I have a problem: netsh asks for elevated rights.
    So, the next problem is: how do I run cmd.exe (or any other programm?, by extension) as administrator (from LabVIEW)?. Note that I'm using an account with admin rights. But I would prefer not having to disable the User Account Control configuration, and I don't want to force the user to any interaction (clicking in pop-ups, or right-clicking in anything), I want it to be as automatized as possible.
    I did a bit of research and couldn't find anyway to do it, neither any command to run with cmd, so the two similar solutions that came to my mind are very rudimentary and kind of dirty:
    Use DLLs to make LabVIEW press the keys necessary to open cmd running as admin via key shortcuts (using a variation of https://decibel.ni.com/content/docs/DOC-29563 and the key shortcuts from here: http://www.howtogeek.com/howto/windows-vista/run-a​-command-as-administrator-from-the-windows-vista-r​...). Here, I open the Window menu (with LWIN), properly writes "cmd", and then uses CTRL+SHIFT+ENTER ok... but then the User Account Control appears and LabView keeps doing the commands (I want ALT+Y or LEFT & then ENTER)... without affecting to the UAC! If I make LabVIEW wait a bit and manually close the UAC I succesfully have the command prompt... but LabVIEW is still incapable of write the text that I'm giving it to him (the netsh commands). LabVIEW runs the software, but it's like the UAC & the command prompt are running in a higher? level and are not affected by LV. If I do the same over a .txt I succesfuly have the intended text. Any ideas about this?
    Create a link to cmd.exe and change the properties to "Run as administrator", then use System Exec to call the link, expecting to open a command prompt with elevated rights, and then write the netsh commands either with DLLs (that might not work according to my first solution) or using the "standard input" of System Exec? (not sure if this is possible). But then System Exec gives me an error (code 2) when trying to execute the .lnk and so the command prompt does not open. The error code stands for "Error 2 occurred at an unidentified location. Possible reason(s): LabVIEW: Memory is full." Any idea about how to solve this?
    The conclusion is that I'm stuck with two possible solutions none of them working.
    Maybe there's a more simple solution that I didn't think about?
    Solutions to these problems?
    Any different proposals?
    Thanks in advance for any tip or help!
    Note: I titled the thread as Windows Vista, 7 & 8 since I assume all of them asks for admin rights when changing IPs. In case there are other people with the same problem, altough right now I'm only using XP & 7.
    Alejandro Asensio, CLAD

    First question: Why do you have to change OS properties via a custom application? I know such requirements can exist (sigh...) but nevertheless it seems a little bit weird to me ;-)
    OK, now an idea:
    Run cmd.exe via task scheduler. Here is a how to do it: http://maximumpcguides.com/windows-vista/run-a-pro​gram-with-administrative-privileges-without-uac-pr​...

  • DNS - Can't resolve website address because it is the same as domain name:

    Our internal users can't resolve a web address because their domain name is the same as the address.  I'm hoping I can get some advice on what I should do on the DNS server.  My first challenge is, when I look-up address on Arin.net it does not
    come up with anything. CUAMERICA.COM is the domain.  I don't even know the ip address it is resolving to. 

    If I ping www.cuamerica.com I get 38.108.184.171, so in your DNS, in the Forward Lookup Zone for CUAMERICA.COM create a new Host (A) record, call it
    www and give it the IP address of 38.108.184.171

  • CAN'T INSTALL ITUNES 9 ON WINDOWS VISTA 64-BIT OS

    Hey guys!
    I'm having a reaaaallly hard time installing iTunes on my Windows Vista 64-bit OS. Everytime I think it's about to finish installing, it shows me this message:
    What does it mean?? Can someone PLEASE help me, I haven't had music on my iPhone for 4 weeks now!

    Curses ... you did everything right by providing the screenshot, thanks. But we really need to see the error message number that shows up after the "HRESULT" bit for one of those, and it's deciding not show us that.
    Okay ... people who get these error messages for iTunes installs typically are also getting Windows updates failures too. So we'll try to work out what the iTunes/Updates issue is by checking your Update history.
    Go into your Windows Update and click "Update History". Have updates been failing for you recently? If so, doubleclick on each failure to bring up a small window showing some info about the failure.
    What error message codes are you getting for the Windows Updates failures? (For example, 0x8007000B, or something else?)

  • CAN'T INSTALL ITUNES ON MY WINDOWS VISTA 64-BIT SYSTEM

    Hey guys,
    I'm having a hard time installing Itunes on my 64-bit Windows Vista system. Everytime I think it's about to finish installing, it shows this message.
    Someone, please help me! I haven't had music on my iPhone for 4 weeks now!

    Not Windows RT then .  When you say "I've tried both" do you mean the 32- and 64-bit installers for Windows?  In the first instance you should go to http://www.apple.com/itunes/download/ - this should detect the version of Windows you are running and offer the correct installer.  It'll look like this:
    Click on Download Now - this will download the correct installer for you to run and install iTunes.
    There is, however, some anecdotal evidence that the scripts on the Apple site that are supposed to detect the version of Windows you are running may fail for some users - jumping straight to the "Thank you for downloading ..." page with the installer not having been downloaded.  As an alternative, you can go directly to the relevant downloads:
    iTunes 12.0.1.26 for Windows (32-bit) - iTunesSetup.exe
    iTunes 12.0.1.26 for Windows (64-bit) - iTunes64Setup.exe
    of which you'll need the second one.  See turingtest2's notes on Troubleshooting issues with iTunes for Windows updates for more details if you're still having problems with installation; you may also need to consult HP's helpdesk as the error message you report may be symptomatic of a Windows issue, not an iTunes one.

  • Can we install oracle 10g in windows vista

    hi all
    i am trying to install oracle 10g in windows vista ultimate ,
    but it is not getting install in windows vista
    wat is the version i have to use for windows vista ultimate ,
    thank in advance

    Hi,
    you can also check certification from http://support.oracle.com ---> certifications.
    and read below thread.
    http://forums.oracle.com/forums/thread.jspa?threadID=445907&tstart=0

  • I just installed ITunes 11.0.4. I get the error message: "The Itunes Library cannot be saved. A folder was specified instead of a file." When I sign on next, it says the library can't be found. Running Windows Vista with Mcafe protection

    I just installed ITunes 11.0.4. I get the error message: "The Itunes Library cannot be saved. A folder was specified instead of a file." When I sign on next, it says the library can't be found, and Itunes wont open. I'm running Windows Vista with Mcafe protection

    Hi there Br0x,
    You may want to try rebuilding the iTunes library as an initial troubleshooting step. Take a look at the article below for more information.
    iTunes: How to re-create your iTunes library and playlists
    http://support.apple.com/kb/ht1451
    -Griff W.

  • PCMCIA-CAN/2 Series 2 works on windowa Vista?

    Hey ,
              We are using the PCMCIA-CAN/2 Series 2 CAN Card for our application.We are moving to Windows Vista very soon.I was not sure if I can use the same CAN card for the vista operating system?
              I've seen some post about PCMCIA DAQ not working on Vista? is it the same with CAN card too? Details of the CAN card below.
    http://sine.ni.com/nips/cds/view/p/lang/en/nid/1332
    Thanks
    -Vamshi Ainapur
    Solved!
    Go to Solution.

    Hello Vamshi,
    The NI-CAN 2.6 driver supports the PCMCI-CAN Series 2 under Vista x86.  Please note that the PCMCIA-CAN and PCMCIA-CAN/2 interfaces are not supported on the 64-bit version of Windows Vista.  This information is available in the readme file, located on the driver's download page.
    Have a great week.
    O. Proulx
    National Instruments
    www.ni.com/support

  • I can't print using Bonjour on Windows Vista

    Hi. I've connected an HP printer to my Airport Extreme. My great MacBook can print using the printer, but my other computer, running Windows Vista (**** IT!) can't do that. When i install bonjour, it recognizes the printer but can't print. Why? Oh, and after i have installed Bonjour, all the other programs run with problems... so i have to cancel Bonjour... why? Thank you

    deleted Vista and installed XP
    :P

  • How can I install lightroom 5 into windows vista?

    I can download it with Adobe Application manager, but when I am doing an installation, it says me that there is error!!!
    Help me please, how i can istall lightroom into my laptop, i have windows vista business (service pack 2).
    Thank you very much!

    http://helpx.adobe.com/lightroom/kb/windows-vista-supported-lightroom-5.html
    "Windows Vista is not an officially supported operating system for the release version of Lightroom 5, and it doesn't run on Windows Vista."
    Lightroom 5 requires Windows 7 or Windows 8.
    http://www.adobe.com/products/photoshop-lightroom/tech-specs.html
    Unofficial workarounds exist online to get Lightroom 5 running on Vista but try them at your own risk. There will be no support if anything goes wrong.
    http://forums.adobe.com/message/5977691#5977691

Maybe you are looking for

  • How can I change Apple ID for App Store?

    I changed my Apple ID, Itunes on my Itouch recognizes it, but the app store does not. How can I change AppleID for App Store? When I try to update my apps it asks for the password for my old Apple ID which does not exist anymore.

  • How To Create A Map?

    I have three properties: sort, order, and offset sort=<%=sort%> order=<%=order%> offset=<%=nextOffset%>How do I create a Map?

  • Business Object Repository (BOR) in CAF

    Hi, The Business Object Repository (BOR) is the object-oriented repository in the R/3 System. It contains the SAP business object types and SAP interface types as well as their components, such as methods, attributes and events. Is there something si

  • Tricky Report

    Hi, I've got a tricky reporting problem that I'm trying to work through.  We have a monitoring database that I pull from to create a report.  I have the report setup to show errors grouped by day in the week, then by an office.  The problem however i

  • Query Designer: Calculate a % based on two other totals

    Hi Gurus, Here is the scenario of my query: A     B     C     D     E 2      3     6     4     150% 1      2     2     4     50% 2      2     4     8     50% 1      1     1     10   10% 6      8     13    26   50% Column C is calulated by AB and I am