Can't restore ipod mini software

there's a folder and exclamation point on the screen of my mini so i tried to restore the software. but everytime i plug in the ipod, the updater starts to restore, but freezes within the first half of it. please help, im getting very frustrated. thanx

If the iPod is recognized by the computer whilst in disk mode, you can try changing the drive letter by going to Control Panel / Administrative Tools / Computer Management / Disk Manager with the iPod attached and right clicking on your iPod and choosing Reassign. Make it a much higher letter, like I:
Note this can happen when your boot drive is not C:, or when you have a network drive that conflicts with the iPod assignment, or when you have other portable storage devices that are sometimes attached. It's always safe to move the iPod well away from the lower drive letters.
Do also try other ports, preferrably those on the rear.

Similar Messages

  • Does anybody know where i can download the IPOD MINI SOFTWARE

    i recently bought an ipod mini off my friend but he gave me no cd with the ipod mini software. i dont need the itunes software i have that but i dont know where i can download the ipod mini software, any help will be amazing helpful and welcome, thanks

    Yes it could be. You should perhaps restore it using the updater from the link I gave you.
    Install this to your computer, restart the computer, run the Updater, then connect your iPod when prompted (not before), then choose restore.
    This will return the iPod to factory settings, erase the hard drive, reload the software and ensure the iPod is Windows formatted.
    Then you should be good to go.

  • Can't Restore Ipod Mini

    Hi can anyone help with this ?
    My daughter's ipod mini has folder with !mark. My computer doesn't recognise it in normal mode, when I set to disc mode and try to restore the software I get a message to say 'can't mount ipod'. It's fully charged.
    I am stuck and would be grateful for any help

    If the iPod is recognized by the computer whilst in disk mode, you can try changing the drive letter by going to Control Panel / Administrative Tools / Computer Management / Disk Manager with the iPod attached and right clicking on your iPod and choosing Reassign. Make it a much higher letter, like I:
    Note this can happen when your boot drive is not C:, or when you have a network drive that conflicts with the iPod assignment, or when you have other portable storage devices that are sometimes attached. It's always safe to move the iPod well away from the lower drive letters.
    Do also try other ports, preferrably those on the rear.

  • ITunes can't restore iPod mini

    I had to restart the player in disk mode to be able to connect it/see it in iTunes. When attempting to restore my iPod mini 4GB, iTunes 9.1 (79) lies saying that the player 'cannot be restored because it contains files that are in use by another application.' This player was loaded 3 years ago. The computer is a Mac mini PPC 1.25 now using OS 10.4.11. iTunes is unable to access the playlist. Since I'm not sure erasing the iPod with Disk Utility would do any good, please advise. Fernando

    Hello macarra,
    Have you tried resetting your iPod first and then re-attempted to restore it via iTunes? To do this, toggle the hold switch on and off, then press and hold the Menu and Select (Center) buttons together for a couple of seconds until the Apple logo appears.
    B-rock

  • I need ot re install my IPOD mini software but dont have the CD. Anyone know where I can download.

    I need ot re install my IPOD mini software but dont have the CD. Anyone know where I can download.

    Try google. Search "Felix bruns". Select the software you want!

  • HT201252 can not restore ipod it is in disabled gets to the the middle of restore and some cod 9006 come up -

    can not restore iPOD it is in disabled ,some cod 9006
    need help

    Check your security software
    Related errors: 2, 4, 6, 9, 1000, 1611, 9006. Sometimes security software can prevent your device from communicating with either the Apple update server or with your device.
    Check your security software and settings to make sure that they aren't preventing a connection to the Apple servers.

  • Can not restore ipod touch. About 167MB of 346,8MB get loaded than download stops, a few minutes later:  ERROR 3259

    Can not restore ipod touch. About 167MB of 346,8MB get loaded than download stops, a few minutes later:  ERROR 3259! ( High Speed Internet Connection 16000kBits/sec)

    Error 9
    This error occurs when the device unexpectedly loses its USB connection with iTunes. This can occur if the device is manually disconnected during the restore process. This issue can be resolved by performing USB troubleshooting, using a different USB dock-connector cable, trying another USB port, restoring on another computer, or by eliminating conflicts from third-party security software.

  • Can't Download iPod Mini Update

    I am unable to download the iPod Mini software update. I'm using Win XP Pro Svc PK2 with the latest browser.
    When I go through the motions to download it, I click the download button and a yellow bar appears at the top of my browser window. I click the yellow bar then click download then the page say am unable to refresh or something and redirects back to the page where I click the download button. It's an endless loop and the end result is that I never am able to download the upgrade.
    Can someone post the download file to a legitimate place where I can download it? Or can someone email it to me?

    Welcome to Apple Discussions!
    When I download this is what happens.
    1) I go to the page and type in my apple ID and long in.
    2) It says Welcome [name] and then it says Windows or Mac (there is a bubble) I select windows and then hit download.
    3) The next page comes up and says click here to begin download.
    I don't have a yellow bar.
    Try disabling anything like McAfee Privacy Service on your computer.
    btabz

  • How can I restore my data from iCal? I didn't make any backup, but I use  time machine with an external HD. I deleted iCal when I deleted my gmail account. I have tried to restore, but I can only restore the iCal software and not the data.

    How can I restore my data from iCal? I didn't make any backup, but I use  time machine with an external HD. I deleted iCal when I deleted my gmail account. I have tried to restore, but I can only restore the iCal software and not the data.

    So what is your question?
    If you forgot your encryption password:
    Warning: Make sure it's a password you will remember or write it down for safekeeping. If you encrypt an iPhone backup in iTunes and forget your password, you can't restore from backup and your data will be unrecoverable.
    If you can't remember the password and want to start again, you must perform a full software restore and chooseset up as a new device when iTunes prompts you to select the backup from which to restore.
    The above comes from here:
    http://support.apple.com/kb/HT4946

  • Can't Update or Restore iPod Mini

    My iPod Mini shows up in Windows, but instantly says 'Do not disconnect' even when fully charged. iTunes doesn't recognise it and the Updater usually hangs. I've tried everything including the 5 R's and have followed the steps in this article http://docs.info.apple.com/article.html?artnum=93716. When I use the Windows 'safely remove hardware' function, I get an error message saying Windows was trying to write data to the device - I can't see any way of stopping this, even after removing iTunes and the Updater from the PC. The last step offered by Apple is to reinstall Windows, but I don't see why I should have to do this as Norton SystemWorks tells me everything is working fine. Since quite a few other people seem to have been having similar problems recently, could this be to do with an automatically-installed Windows update causing a conflict?
    PC   Windows XP   SP2

    I am having all the same trouble with my Nano. It was working beautifully until today, when I noticed that it was not showing up in the Itunes menu. Itunes says it's not connected, but my computer and it have a fine connection with power, etc. I have tried all of the steps, etc., and have had no luck. Now it will not let me restore it. I get a message saying that there are other applications using Ipod... but I have shutdown everything. I am just stumped. Any suggestions anyone?

  • Ipod mini software- can you install it on more than one computer?

    Hi all,
    Got no response to my first question so I thought I'd try again.
    I want to install the software for my first-generation ipod mini on my friend's computer, but I heard somewhere that you can only install the software on one computer and obviously I also want to be able to use it with my own computer as well. Can you install itunes software that comes with your ipod mini on as many computers as you want or only one?
    Many thanks,
    Samantha

    You don't need to install the software
    Sorry Jeff. She asked "Can you install itunes software that comes with your ipod mini on as many computers as you want or only one?"
    You HAVE to install the software (iTunes) in order to run it.
    Yes, you can install iTunes on as many computers as you want. You do not need to use the software CD that came with the iPod. Probably outdated anyway.
    You can download iTunes from www.itunes.com

  • Can you restore ipod software directly for restore file?

    I have downloaded the ipod restore file from the internet as my itunes download kept on disconnecting: can I restore without having to donwload from itunes. i.e. by using the file I have already downloaded from the internet?
    thank you

    Yes, you can.
    Hold the Option key and click Restore.
    Choose the file.
    Should be good to go.
    Scott

  • Can't restore iPod because it doesn't appear on desktop

    I connected my ipod to my Mac, it showed up on the desktop but not in iTunes. The ipod window said Do not Disconnect. I waited a few minutes, then chose Eject iPod. I restarted the mac, reconnected iPod using a different FireWire port. The iPod no longer appeared on the desktop, and the Do Not Disconnect warning was still there. I switched to USB connection. No go. I ran Disk Utility Repair Permissions on my HD and restarted.
    I've been downloading a lot of podcasts lately, don't know if that's the cause of this problem. I'm using iTunes 7.1.1 and Mac OS 10.4.9.
    I found a solution for this problem in Archives, but it's dated 12/05, and I'm wondering if it still applies. Part of the solution says to run disk utility, select the ipod, then select Format. But I don't see Format as a choice on version 10.5.6 of Disk Utility. Maybe what was Format in 2005 is now called something else? Like maybe Partition? Here's the post (by john madson) from 2005:
    "i can fix this but you will need a mac let me explain
    when the last system update for mac os x tiger came through after you are done installing the update the update says it is optimizing the hard drive well it optimizes the hard drive on the ipod as well and cause the internal drive on the ipod to malfunction but this isn't apples fault this is caused by user error im sorry to say
    in order to fix this on the mac
    here is what you need
    1.the latest apple ipod updater software (will explain why later in this)
    2. of course a apple ipod mini usb cable
    3. apple ipod mini
    4. mac os x panther or tiger
    1.start up the mac computer
    2. connect the ipod to the computer don't worry if it doesn't appear on the desktop
    3.go into utilites by double clicking on the hard drive icon and select utility
    4.run disk utility
    5.you will notice the ipod will apear in the disk utility program but not on the desktop
    6. select the ipod in the left pane
    7. select format
    8. tell it to format it in a mac os extended partition
    9.once this is done you will notice the ipod will apear as a removable hard drive but. do not disconnect the ipod
    10. run the apple ipod updater
    11.reinstall the latest updated firmware
    12.unplug the ipod
    13. replug in the ipod
    14. you will notice the ipod will apear as a ipod icon on the desktop
    WARNING:AFTER YOU FORMAT IF YOU DISCONNECT THE IPOD THIS WILL BRICK THE IPOD WHEN YOU FORMAT THE IPOD USING DISK UTILITY IT ERASES EVERYTHING INCLUDING THE IPODS OS SO YOU NEED TO RUN THE UPDATER IMMEDIATLY TO GET THE IPOD WORKING AGAIN
    THE FIRST TIME THE IPOD IS RECONNECTED AFTER RUNNING THE IPOD UPDATER RE RUN THE UPDATER SELECT RESTORE THEN IT WILL FORMAT AND SET UP THE IPOD CORRECTLY
    FOLLOW INSTRUCTION CAREFULLYNEXT SYSTEM UPDATE DO NOT HAVE THE IPOD CONNECTED TO THE COMPUTER DURING UPDATE"
    G5 Quad 2.5GHz   Mac OS X (10.4.9)  
    G5 Quad 2.5GHz   Mac OS X (10.4.5)  

    One more thing: I reset my iPod (toggled Hold, etc.). It appeared in iTunes but not on the desktop, with the message "If your experiencing problems with your iPod, you can restore its original settings by clicking restore." Which I did. Got a window asking if I wanted iTunes to check for a new software update. I said yes. Got an exclamation-point msg "There was a problem downloading iPod software. The requested resource was not found. "
    G5 Quad 2.5GHz   Mac OS X (10.4.5)  

  • Cant Restore ipod mini

    My Ipod mini has the folder with an exclamation point icon on it and I have tried all the solutions apple provided and none have worked to solve the problem. So I tried to restore my ipod mini and even that didnt work. I switch my ipod mini into disk mode so that the ipod updater software can recognize it but as soon as the updater software connects to the ipod mini, the ipod then restarts itself and the updater software is no longer connected to the ipod and goves me the error "cant mount ipod". I have tried restoring it several different times on different USB ports several times. I am stumped and have no idea how to solve this problem and help would be appreciated.

    If your iPod is recognized in Explorer, close the updater program and try this.
    Click on start/control panel/admin tools/computer management/disk management/right click on the iPod and select “change drive letter”.
    Choose something lower down the alphabet, say “M”, or something similar.
    A drive letter conflict can sometimes cause the 'can't mount iPod' message.
    Then try the restore again.

  • Ipod mini software update!

    Is there a way to uninstall the recent software update of the ipod mini as i am having problems with adding songs to ipod that i was not having before the update. re-setting ipod via the updater doesn't do the trick!

    "re-setting ipod via the updater doesn't do the trick! "
    You can't reset the iPod via the updater, you can only restore or update the software.
    In order to revert to an older version of the software, you would have to find an older updater (on your computer or the installation disk perhaps?) and use that.

Maybe you are looking for

  • How to count number of vowels in the String?

    Write a program that calculates the total number of vowels contained in the String" Event Handlers is dedicated to making your event a most memorable one." Please help!

  • Managed Property in Refinement - why not use the automatically-created site column managed property

    Hi, I read that although SharePoint 2013 automatically creates managed property for site column (OWS_Q_TEXT_COLUMNNAME) - in the refinement i should use a managed property and map to the ows_columnname. why? what's the difefrence? what is best - to c

  • Airport Extreme Stopping G5 from Sleeping.. Help!!

    I have just upgraded to Leopard. Before the upgrade my G5 would go to sleep automatically as set in the Power saving prefs. After upgrading to leopard I found that my G5 will not automatically go to sleep. After pulling my hair our I have finally dis

  • Problem with app x86 - x64

    Hi, Develop an app, with DI api, in windows 7 32bits it works perfectly, but in windows server 2008 x64 not, no connect with SAP , since I must compile the app in order that it works?. SAP B1 8.8, SQL Server 2008, windows server 2008 x64 Thanks, Carl

  • Show bootflash output doesn't display space occupied by IOS image

    Hello All, We are having Cisco 4948E model switches.on one of switches while troubleshooting high cpu I have noticed that show bootflash doesn't show any IOS statistics like total or free space!! Can anyone give any advice on our future course of act