Can't restore my bricked ipad getting error 4013
HELP. My Ipad has been stuck in a reboot loop. Have tried to restart and resore but keep getting Error 4013. Ipad now useless.
Please help.
Hi, error 4013 could not restore ipad/iphone
I had the same issue as you what I did to reslove the issue was to:
1. Make sure the ipad is in DFU recovery mode (waiting for you to plug into itunes symbol)
2. Use an original ipad cable that came with it our from another ipad
3. Do not use any type of extension cable between the ipad and the pc/mac
4 Before you plug in your cable to the ipad move it to another USB port on your pc/mac one that you have not tried before or normally use
5. start itunes by right clicking on itunes run as administrator.
6. when itunes detects in recovery mode start the recovery.
7. Your pc/mac now detects the ipad hardware again and installs the driver properly again.
8. sit back and voila.
hope that helps.
regards,
LaCalaTech.
Similar Messages
-
My iPhone 4 updated to IOS5 but now I can't restore. I'm getting error 54?
Everytime I plug it in, I have the option to restore from just before I updated. It had my emails, applications and contacts, but is missing my music. When I go to sync the music I get an interruption message and the error code (-54). What's going on with this crazy thing?
Yep, me too. Not finding anything in the troubleshooting for this even though I've looked and looked. I'd love an answer as I still have no music on my phone, although thankfully it still works.
-
HT201210 i am restoring my ipad and get error 4013 please help
i am restoring my ipad2 and get error 4013 please help
In case you don't know this, when you open iBooks, click the "Books" button on top and then click "PDFs" to see them.
-
My iPad says it has to restore to update, but it will not. It is caught in a cycle of not being able to restore but needed to restore. I keep getting error code 3014 but I can not figure out what this means! nor can I do anything about it! So Frutrated!
Also...
See Here > http://support.apple.com/kb/HT1808
You may need to try this More than Once...
But... if the Device has been Modified... this will Not necessarily work. -
I recently did the latest update, and then I charged my Ipad 2 afterwards. I went to use my Ipad 2 days later, and it would not even turn on. Then after a couple minutes, the apple logo appeared as if it were loading. It continued to do this for a few minutes, and then the screen starting turning on and off. Then 5 minutes after that, my lock screen appeard and froze. Then it shut itself off again. I tried plugging my ipad into Itunes to do the recovery restore, but I kept getting error messages.
Unable to Update or Restore
http://support.apple.com/kb/HT1808 -
I was trying to installed new ios update and suddenly my WIFI connection got desconnect. now I am trying to restore my Ipad2 but getting error saying "the Ipad could not restored, An unknown error accured (3194)". so please help me out to resolve the same.
When I restart my iPad the connect to iTunes comes up and stays on until it shuts down again, I have read a report from Apple support suggesting I reinstall iTunes so I might try that again and also your suggestion which i shall also try, but thanks again - rg1547
-
How can i restore my old iPad mini onto my new iPad air2
How can I restore my old iPad mini onto my new iPad air 2
Click here and follow the instructions.
(117974) -
I can't install itunes for windows get error message 5
i can't install itunes for windows get error message 5
I've been having the same issues for the past year and a half. I've spent 6-8months trying to figure it out. Went to various Itunes stores with pictures on my Iphone per each step so I could relay all information that I'd come across and the personnel were less than helpful, after conversations that would sometimes last an hour between myself, employees and managers they always came back to "simply uninstall then reinstall" when I told them for the thousanth time that I've done that multiple times and my errors are happening while trying to reinstall it they act stumped and say "well then I'm not sure, I'll give you a call if I figure it out" and disappear. I've been very disatisfied at the lack of support from Apple and if Android to piece together a reletively reliable phone I'd switch to them in a heartbeat. I'll follow this question incase someone can answer this, but I don't have much faith.
BTW, wifey has Windows 7 running on the laptop and my phone syncs just fine to that and no trouble with itunes, just mine (desktop). -
My iphone 4s remains in recovery mode permamently. Itunes wont restore it, constant messages of error 4013 keeps coming up on screen, is there any1 out there who can help before i crack up?
Hello Sean,
It sounds like you are constantly needing to restore your phone because it keeps going into recovery mode. Usually putting a device into recovery mode and restoring it can help isolate an issue to your iPhone hardware if an issue persists afterwards. I would try manually putting it into recovery mode and restoring it 1 more time:
If you can't update or restore your iOS device
http://support.apple.com/kb/HT1808
If that does not resolve it the symptoms indicate to me that it is a hardware issue causing this to happen and would seek service for it:
iPhone Repair - Other Repairs
https://www.apple.com/support/iphone/repair/other/
Thank you for using Apple Support Communities.
All the best,
Sterling -
How can i restore my disabled ipad
How can I restore my disabled ipad? says connect to itunes, then please enter password on ipad, but it is disabled!!!
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
Cheers, Tom -
My Ipod touch stays on the start up screen with the apple and just blinks. I have tried all suggested
resolutions but none work. I have tried to restore it but continually get error code 1611 or 9. I have
tried all of those solution to no avail. Any other suggestions?If you tried all the suggestions of:
http://support.apple.com/kb/TS3694
You likely have a hardware problem since the article says a possible cause of the 1611 error is a hardware problem. I would make an appointment at the Genius Bar of an Apple store. -
HT201210 I can not restore my iphone...error number 1015
helllp!!! I can not restore my iphone...error number 1015
SEARCH!!!
iPhone Error 1015: http://lmgtfy.com/?q=iphone+error+1015 -
Not able to log in to itunes on ipad; getting error as 'Cannot connect to itunes'
not able to log in to itunes on ipad; getting error as 'Cannot connect to itunes'
Cannot connect to iTune Store
http://support.apple.com/kb/ts1368
http://support.apple.com/kb/ts3297 -
Hello
I can not restore my iPhone 4S itunes error says I have 29 and I put it in DFU mode and not working help please
-
I can't download any videos, keep getting Error
I can't download any videos, keep getting Error #2032
Care to share which OS you are using?
Which browsers are you trying to download videos from? Problem appears in only one browser or all? If one, which one?
Post the website URL of the site you are trying to download from for others to test it out.
Maybe you are looking for
-
Blocking of Automatic PR creation by Sales Order
Hi Gurus I need to block the automatic creation of PR from a Sales order and it should happend when an automatic block is created based on the pricing condition. My code in BADI creates the block but in background it creats the PR also and when later
-
Can someone help a non-tech type with connecting AppleTV?
I want to connect AppleTV3. My current setup was done 6 yrs ago when I bought TV, Receiver and Speakers. Sony TV has 3 HDMI inputs, Integra receiver has 2 HDMI inputs. On receiver HDMI1 is from cable box, HDMI2 is Bluray, HDMI Out goes to TV HDMI1
-
Block G/L Account for posting but not for parking
Hi all, is there a possibility to customize a G/L account in a way that it is blocked for posting but not blocked for parking? Kind regards, Georg
-
Hi all, Is there a workaround or a patch that corrects the behaviour below: When we are adding an invoice in SAP, the payment means screen comes up automatically when the payment means field "open incoming payment" is set to other than no. However if
-
How can we call a transaction from a report?
hi experts can u help me for this