Can't restore to factory settings the Satellite L350

Hi
there i was having problems with Vista so a friend recommended i tried ubuntu.
But now i want to go back to vista but i can't seem to get my laptop to run the restore.
I've tried holding down 0 while powering on also pressing f8 but it still just boots as normal.
The Toshiba recovery disk creator isn't on my computer either. I don't have any Vista discs, but if i can remember correctly my laptop never came with them, i'm really stuck on what to do.
Satellite L350

Hey,
Im a little bit confused about your posting. You wrote that you tried Ubuntu but have you installed Ubuntu and deleted Vista or was it just a Ubuntu live disk?
The Toshiba HDD recovery function is described here:
http://aps2.toshiba-tro.de/kb0/HTD9102IR0000R01.htm
But one point more: The HDD recovery works only with preinstalled Windows version from Toshiba so if you have installed another OS or did an upgrade, this option doesnt work anymore.
And youre right: The notebook doesnt come with Toshiba recovery disk because you have to create this disk yourself using Toshiba recovery media creator that is preinstalled. This tool will create a bootable disk with an image of factory settings that can be restored every time in contrast to HDD recovery that only works with original installed OS.
To cut a long story short, just order a recovery disk from Toshiba and install it. Then you have factory settings back :)
https://backupmedia.toshiba.eu/landing.aspx

Similar Messages

Vista will not boot/install after performing a restore to factory settings on satellite l305

I have a satellite l305 that i bought new thru walmart.com about a year & a half ago, and for the past few months it seems like there are more & more issues with this pc that are causing it not to work properly-everything from drivers failing-or even disappearing, in some cases-to crashing into a blue screen everytime i insert a micro sd card into the slot.. My sound drivers are gone & even after i THOUGHT i downloaded them again, they still won't install or even recognize that they are there and then yesterday it suddenly stopped being able to fully load some of my fave games that i play daily.. I have tried EVERY SINGLE SUGGESTION in EVERY article, forum, help site, etc.,that i could find & even tried to get help over the phone from a pc tech here locally, and nothing has been able to fix my issues. I have done so many system restores from so many different restore points, installed updates, uninstalled updates, tried to install new drivers, rolled back drivers, started in safe mode to do diagnostics checks, entered BIOS & checked EVERY setting, reset all settings to default, checked error logs, etc., etc., etc...I have even completely disassembled my entire laptop & checked all wiring, fuses, etc., made sure everything was working, etc., So, finally yesterday I decided that it's gotta be something to do with a tech issue-probably with my vista home premium OS that came pre-installed at purchase, so i thought it best to just go ahead & go into the back up & restore & back up all my files onto an external hd using the file transfer wizard option inside the restore center, and then proceed into restoring the pc to it's factory, or "out of box", state. And i assumed i covered my bases by saving the back up-just in case...ohhh no-not the case at all!
It did't even occur tp me to that i might need an actual BOOT disk for vista after the fact. I just assumed that "out of box" meant just how it originally came-WITH vista pre-installed & ready to set up-like it did the day i bought it! i also was under the assumption that, isnce it never asked for a product key or anyting to activate vista then, that it wouldn't need one now either. But anyway, so this is where i'm at now-after i did the factory restore & turned it back on, it said to wait while windows finishes installing-but it never finished, then finally about an hour later, it said that windows was unexpectedly interrupted during installation & did not complete, and for me to restart pc to try install again. But after i did that, it was the same thing over & over. it NEVER installs!
So then i decided to go ahead & "restore windows using back up image" that i created on my external hd prior to the factory restore, thinking that it would just kinda pu **bleep** all back, but thats not working either. it recognizes the drive, and takes me to a menu where i can actually even view all the files on the drive and even tho they are known by my pc to be back up files, it still won't associate them to being back up files to MY PC!! I even got desperate enough to find a site that claimed to offer a free vista boot disk in the form of an iso image that i burned onto cd & tried to boot from as well. That actually took me to an install screen for windows & all the way to where it asks for product key-which DID NOT come locatedon any sticker anywhere on my laptop, and because they DID NOT include any OS utility, install, or boot disks with the purchase of my laptop, i don't know what the product key is OR where else i might be able to find that info, and i WILL NOT pay for ANOTHER ONE, just because they were too lazy or cheap to send the disks with the pc! so i tried to skip this step till later, but when i skip it, it shows anpther error saying that install was terminated & could not finish install & if i wish to continue, for me to restart my pc & re-attempt install..WHAT IS GOING NE WITH THIS AND WHAT CAN I POSSIBLY DO TO JUST BE ABLE TO USE MY LAPTOP AGAIN?? HELP ME PLEASE SOMEONE!!

Hi,
I do not really understand... Did you made a backup before restore to factory settings? And did you copy all backup files to an external device? If not, the data is gone!
Why? Restoryng to factory does not mean a reinstallation. It means to fill the whole harddisk with an image of the first (factory) installation. All other data will be destroyd! Other partitions are deleted and normally you find only one big partition - the whole hdd.
If you have a complete backup on external drive and it is corrupted during restore, try to open the files manually. Maybe you can restore some single files.
Good luck
kind regards
Stefan

Can't restore to factory settings due to encrypted Mac HD

II've really messed up. A few weeks ago I encrypted my Mac HD and received a long 24 figure passcode, which I still have. Yesterday, I was having issues with my Mac (Mountain Lion) and I went to restore to factory settings. I have no T-MOBILE back up and put all my files on and external HD.
the the issue I have is that in Disk Utility my Mac HDR is now untitled and I can't do anything with it. I can't turn off the encryption either because the long password and my usual password won't work. When I try to erase the now untitled HDR it says "are you sure you want to erase the partition "untitled" and create an encrypted partition? i do this but nothing really happens except for the HD now becomes "Encrypted Partition".
iif I try to reinstall the Mac OS X I eventually just get to a grey "stop sign" screen. I've really messed up here and I think its due to me having encrypted the drive. I've resorred to factory settings once before when I thought I was selling my Mac and there were no issues. Please help as I have to get on with my MA.

Hey,
Im a little bit confused about your posting. You wrote that you tried Ubuntu but have you installed Ubuntu and deleted Vista or was it just a Ubuntu live disk?
The Toshiba HDD recovery function is described here:
http://aps2.toshiba-tro.de/kb0/HTD9102IR0000R01.htm
But one point more: The HDD recovery works only with preinstalled Windows version from Toshiba so if you have installed another OS or did an upgrade, this option doesnt work anymore.
And youre right: The notebook doesnt come with Toshiba recovery disk because you have to create this disk yourself using Toshiba recovery media creator that is preinstalled. This tool will create a bootable disk with an image of factory settings that can be restored every time in contrast to HDD recovery that only works with original installed OS.
To cut a long story short, just order a recovery disk from Toshiba and install it. Then you have factory settings back :)
https://backupmedia.toshiba.eu/landing.aspx

I forgot my passcode, the power button is stuck (phone is on), so how can I restore to factory settings?

My 4s is locked out because we forgot the passcode. I can't restore it from iTunes backup since I can't turn it off because the power button doesn't work. If I treat it as a stolen phone and erase via Find My iPhone, will I need that power button to work in order to get it up and going again after restoring?

The phone is pretty much disabled if either button doesn't work.

Can I restore to factory settings in my iMac without compromising iTunes or iPhoto?

I recently purchased a new iMac, but it seems to be running slower than it should. I fear this is from the transfer it completed from my old macbook. Can I restore factory settings and erase all the unnecessary stuff without erasing the items in my iTunes library or iPhoto library? Please advise. Gracias.

Putting it back to factory settings means erasing the hard drive. Your iMac did not come from the factory with your music or photos on it, right?
Move those libraries (the iTunes library is in your Music folder, the iPhoto library is in the Pictures folder, unless you moved either one previously) to an external hard drive. Then erase the internal hard drive and reinstll the system. Reconnect the external hard drive. Launch iPhoto while holding down the option key on your keyboard. When it asks where to find the library, point it to the library on the external hard drive. Do the same thing with iTunes.
Best of luck.

Macbook Pro from 2011. Can I restore to factory settings without disk?

Hello I think I downloaded a virus on my mac. I dont have time machine so the only option I think I have is to restore my macbook but I dont think my macbook was baught with Lion. What are my options? P.s. My Model Identifier:
MacBookPro8,1

Hello I think I downloaded a virus on my mac.
Before you waste time restoring your computer to factory settings, what makes you believe you have a virus? Although Macs are not invulnerable, malware on the Mac is quite rare and most of it can't make it past the built-in defenses in Mac OS X. So, it's very unlikely that you have malware. Post a clear, concise description of the problems you're having.
Also, if you don't have backups, that needs to be your absolute top priority. Without backups, it's just a matter of time before all your data is irrevocably destroyed.

How can I restore to factory settings and wipe harddrive?

I am selling my macbookpro 2.16GHz 120GB Duo Core online and I want to be sure that any information cannot be reclaimed from the hard drive. So far I have transfered my files to an external HD and erased all files on the laptop through the trash can application, including emptying the trash. I then inserted the original install disk which I believe returned the computer to factory settings because once it is turned on it begins with the welcome/ set up screens. But I really just want to be sure that I have erased everything and that nothing can be rebuilt from the hard drive. Should I have done something else to "deep clean" it?

Boot from your OS installer disk. The one that came with the MBP. Select Disk Utility from the Utilities menu. Select the hard drive and then select Erase. You have several choices for the erase procedure so select the one you prefer. The more passes you select the longer the procedure will take. Then install the OS. After the last reboot when Mac Setup Assistant begins to run quit it and direct the Mac to shut down. The next time it's booted (by your new buyer) it will run again and they will have the opportunity to set it up from brand new.

My phone had to be replaced. I backed up to the cloud and when I got home I thought it would upload to my phone, but it didn't. I restored to previous backup on computer and now that's wrong. Can I restore to factory settings/restore to my cloud?

Is back up and sync the same thing?

Is back up and sync the same thing?
No. Syncing transfers iTunes content to your devices. Backing up stores all data (minus iTunes content) that you have on your phone, and can be loaded onto a different device or reloaded onto an existing device.
Go to Settings > General > Reset > Erase All Content and Settings. Let the device power down and back up. Go through the setup screen and DO NOT select restore from iTunes backup. Instead, choose iCloud backup, sign in with your Apple ID and select the correct backup.

Appletv recognizes my wireless network but won't connect to the internet. can't restore to factory settings

appletv won't connect to the internet, but recognizes my wireless network. ip address starts with 169.. somethings not right. never had a problem with appletv and home sharing until the update that required a change in my apple id

An IP address starting with 169 indicates you are not properly connected to your network. Try restarting your router and try to connect again. if the problem persists you may be suffering from interference.

Can you restore to factory settings?

I purchased a Mac Mini a few months just to see what Apple was all about. Well, as soon as I find out what Apple is going to do with the PowerBook I am going to order one. My question is this, when I sell the Mini can I reset it just as I got it? If so will it take all of my personal info off and still keep the programs that were loaded?
Thanks for any help!
Denny
Mac Mini Mac OS X (10.4.3)

My question is this, when I sell the Mini can I reset it just as I got it?
If so will it take all of my personal info off and still keep the programs
that were loaded?
Yes.
To restore the Mini to factory state, you need to reformat the hard drive using Disk Utility with the original install package that shipped with the Mini which is included on install disc #1.
If you want to erase the files so that they cannot be recovered, you can select security options to write zeros over the disk space. To make it more difficult to recover the files on the disk, you can specify doing this once, seven times, or 35 times.
In Disk Utility, select the disk you want to erase and click Erase.
Specify a volume format (For OS X it should be HFS+ or extended with Journaling enabled.)
Click Security Options and select the option you want to use. Click OK.
Click Erase.
Then re-install the OS and all software included with the install package that shipped with the Mini. When the computer reboots after the install has finished, don't proceed with the setup assistant and shut down the computer.

Can I restore to factory settings from within windows?

I have an NB205-330 with Windows 7.
I installed Ubuntu Netbook Remix and Grub became my bootloader. Having 2 OS's wasn't as fun as I thought it would be so I'd like to return to just having windows. If I delete the Ubuntu partition Grub still tries to load at startup but nothing happens. So I reinstalled Ubuntu and I can choose which OS to load again. Holding 0 at startup doesn't work, my recovery partitions still show up as healthy, though the recovery media creator says "cannot open target partition" when I start it up. I don't have a big enough USB drive to try and create a system recovery disk so I decided to see if I could create an application recovery disk and that seemed worked fine, so maybe I would be able to create a system recovery disk?
Do I have any options except: 1) buying a bigger USB and see if I can create a recovery disk 2) ordering a recovery dvd

mini notebook NB205-N330BL
mini notebook NB205-N330BN
Maybe one of those minis.
Your problem is that the master boot record (the very first sector on the hard disk) now contains the GRUB loader. The BIOS branches directly to that. You need to replace it with Microsoft's MBR. Follow these instructions.
Turn the computer on and immediately press and hold the F8 key.
On the Advanced Boot Options menu, choose Repair Your Computer.
When you reach the System Recovery Options menu, choose Command Prompt.
Enter this to replace the MBR.
Bootrec /FixMbr
See KB927392.
-Jerry

Pavilion 23 all in one, restore to factory settings. how can i do this,

Pavilion 23 all in one, how can I restore to factory settings? Windows 8.

Hi:
Please read the info at the link below.
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&dlc=en&docname=c03489643&lc=en&jumpid=reg_r1002_us...

HT4061 I forgot my 4 digit lock passcode & now cannot get into the 4S iphone - Is the ONLY way to fix this to restore to factory settings? I haven't synced my phone to my computer in a loooong time -

I setup my 4 digit lock & now cannot login (thought it was what I wrote but not working; I have not synched my computer w/my Iphone in a
long time- is restoring to factory settings the ONLY way to unlock this? (arrggghh). Any help is greatly appreciated.

Yes, that's correct.
Locked Out, Forgot Lock or Restrictions Passcode, or Need to Restore Your Device: Several Alternative Solutions
1. iOS- Forgotten passcode or device disabled after entering wrong passcode
2. iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
3. Restoring iPod touch after forgotten passcode
4. What to Do If You've Forgotten Your iPhone's Passcode
5. iOS- Understanding passcodes
6. iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
Forgotten Restrictions Passcode Help
You will need to restore your device as New to remove a Restrictions passcode. Go through the normal process to restore your device, but when you see the options to restore as New or from a backup, be sure to choose New.
Also, see iTunes- Restoring iOS software.

TS1717 restoring default factory settings without itunes as both may have malware

How can I restoring default factory settings without itunes on my ipod 1 and ipod 3rd generation, as both may have malware aswell as 3 laptops, 2 mobile, TV snd BluRay Browser.
any advice will be greatly appreciated.
have tried to disinfect with Kaspersky products but the malware just overwrites everything that is put into the p.c. so I need to use just the pad itself, that is, of course, if it allows me access.
theres nothing like a ipad scorned, ask my weary eyes. cheers

yep, unfortunately can't reset without the passcode either.
With regards to doing a restore, do you mean:
open itunes on my computer
click on my device on the left
go to the device summary
click restore
it then asks if i want to back up before i restore (to which i say no)
then it asks me if i'm sure I want to restore to factory settings and that all of me media and data will be erased and replaced with the newest version ( to which I say yes)
then it takes about 90 mins to do this but when I look at my phone, everything is exactly the same.
Am I missing something? Obviously I'm technologically challenged, but I HAVE to get to the bottom of this!

AirPort Extreme extends my network and has worked well for three months. Now it can no longer extend the network and flashes Amber. I have restored to factory settings moved it closer to time capsule and rebooted the system without luck

i have a blinking Amber on my extreme now and it cannot extend the network. It was working fine and nothing has changed. I have restored to factory settings moved it to another room and rebooted the system without luck. Any suggestions

What OS are you running?
Please give me a screenshot of the current AE setup..
I strongly recommend if you have issues.. take control of all the variables. Apple routers have too much auto..
Here is a list that I use for setups when using Yosemite.. but it relates to any OS.
You will need to factory reset again to get going.
Factory reset universal
Power off the AE.. ie pull the power cord or power off at the wall.. wait 10sec.. hold in the reset button.. be gentle.. power on again still holding in reset.. and keep holding it in for another 10sec. You may need some help as it is hard to both hold in reset and apply power. It will show success by rapidly blinking the front led. Release the reset.. and wait a couple of min for the AE to reset and come back with factory settings. If the front LED doesn’t blink rapidly you missed it and simply try again. The reset is fairly fragile in these.. press it so you feel it just click and no more.. I have seen people bend the lever or even break it. I use a toothpick as tool.
Then redo the setup from the computer with Yosemite or whatever you are using.
1. Use very short names.. NOT APPLE RECOMMENDED names. No spaces and pure alphanumerics.
eg AEgen5 for basestation.
Use AE24ghz and AE5ghz for wireless on each band, with fixed channels as this also seems to help stop the nonsense.
2. Use all passwords that also comply but can be a bit longer. ie 8-20 characters mixed case and numbers.. no non-alphanumerics.
3. Ensure the AE always takes the same IP address.. this is not a problem for router but if the AE is bridged you can have trouble.. Try using the static IP method or control it via the main router dhcp reservations.
4. Check your share name on the computer/s is not changing.. make sure it also complies with the above.. short no spaces and pure alphanumeric..
5. Make sure IPv6 is set to link-local only in the computer. For example wireless open the network preferences, wireless and advanced / TCP/IP.. and fix the IPv6. to link-local only.
6. Set up the extend to the Express using 2.4ghz and then see how good or bad the connection is.. this is better in the old v5 utility but if you hover your mouse over where it shows connection an extra chunk of info comes up.
I have specifically used 5ghz to make the extend.. because by testing it works better.. but do not be fooled.. this good connection is poor.. the RSSI.. which is difference signal .. at -79dbm is down the bottom of the stable.. and it drops out on a daily basis.. you want to see that signal around -60dbm at min.
There is a lot more jiggery pokery you can try but the above is a good start.. if you find it still unreliable.. don't be surprised.

Can't restore to factory settings the Satellite L350

Similar Messages

Maybe you are looking for