Can't run Azureus on new MacBook after moving account

I just replaced my G4 iBook with a spffy new MacBook, and after moving my files and preferences over automatically, I can't get Azureus to run at all on the new machine. I've removed and reinstalled the program multiple times, both manually and with the shareware de-installer SuperPop, and I've had no success whatsoever at getting the program to launch. Any tips/advice etc that you can provide me with would be much appreciated. Thanks!

Aha! Turns out the version distributed via VersionTracker is not universal. I was able to find a universal build via the Azureus wiki. In case anyone else needs the build, it's at http://azureus.aelitis.com/files/Azureus2.4.0.2_OSXUniversal.dmg

Similar Messages

Can i run snow leopard on macbook pro puchased new in 2009?

Can I run snow leopard on macbook pro purchased new in 2009?

The Snow Leopard 10.6 DVD should still be available at this time from Apple for $20. You will have to call Apple Customer Care 1-800-692-7753 or 1-800-676-2775 to purchase it. It may still be in the Legacy Products list. The App Store which is required to download 10.7 Lion or 10.8 Mountain Lion is part of the 10.6.6 update.
If you wait to long and they no longer have any in stock you will have to buy it from eBay or Apple resellers that still have stock. But you will have to pay a premium since the DVDs are no longer being made. Snow Leopard DVDs are already over $100 on Amazon.
http://www.ebay.com/sch/i.html?_nkw=10.6+snow+leopard&_sacat=0&_odkw=mac+os+10.6 &_osacat=0

Can Final Cut Pro 7 be run on the New MacBook Air

Can Final Cut Pro 7 be run on the New MacBook Air (just for looking at footage and assembling a rough cut) or is the graphics processing inadequate? Also wondering the same about Photoshop CS5 and Aperture 3.1.3.
Thanks,
Kevin

You can install on (1) Tower and (1) Laptop, as long as they are both used by you, and NOT at the same time. This is for when you edit on your tower, but then need to edit at home, or on the road. You cannot use one copy of FCP on multiple machines at the same time. You need one copy for each machine you intend to use at the same time.

I want to restore the preinstalled OS X Maverick on my new MacBook after upgraded installed Yosemite gets stuck at load bar

Hi,
After my free upgrade to OS X Yosemite
on my new MacBook with preinstalled OS X Maverick,
the MacBook starts with the new colorful Yosemite-Screen
and I can login to my MacBook-Account succesfully;
but then, after my password is accepted
the Yosemite load_display_line loads to a 1/3 only and the Yosemite stucks at this point.
As offered during my tries to fix the problem on the MacBook,
I had my MacBook checked by Apple
and received the code for "no problems, my MacBook is alright": ADP000.
Is somebody here who knows how
to restore the preinstalled OS X Maverick on my new MacBook
after the upgraded installation of Yosemite?
jona li

Here's how:
Install Mavericks, Lion/Mountain Lion Using Internet Recovery
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
Boot to the Internet Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND-OPTION- R keys until a globe appears on the screen. Wait patiently - 15-20 minutes - until the Recovery main menu appears.
Partition and Format the hard drive:
Select Disk Utility from the main menu and click on the Continue button.
After DU loads select your newly installed hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed. Quit DU and return to the main menu.
Reinstall Lion/Mountain Lion. Mavericks: Select Reinstall Lion/Mountain Lion, Mavericks and click on the Install button. Be sure to select the correct drive to use if you have more than one.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
This should restore the version of OS X originally pre-installed on the computer.

Hi, i'm Architec and my basic programs are: Autodesk Architecture and 3D studio Max. Can i run it in the MacBook Pro 13.3-Inch (NEWEST VERSION) Thanks!!!

Hi, i'm Architec and my basic programs are: Autodesk Architecture and 3D studio Max. Can i run it in the MacBook Pro 13.3-Inch (NEWEST VERSION) Thanks!!!

You can but make sure you upgrade your RAM to 16GB - you can't do that through Apple...
Autodesk is a memory intensive program and the same goes with 3D Studio Max.....
Another suggeston if you must use a 13 inch is to buy the base 13 inch Macbook Pro and upgrade the RAM to 16GB and install a SSD to make it perform fast.
Another option is to get a refurbished 15 Inch Macbook Pro and do the RAM upgrade yourself...Advantage going 15 Inch is because it has it's own discrete graphics adapter rather than the built in Intel video.

Can i hook up a new macbook air to my older imac screen that does not have a thunderbolt i/o?

can i hook up a new macbook air to my older imac screen that does not have a thunderbolt i/o? if not - what can i do to view on a larger display? thanks in advance for any help!!!

You should be able to get an adapter that will change the Thunderbolt out to a DVI or HDMI out, and connect that to an external monitor. I am not sure what connection your iMac screen has, or if it even HAS input capability. I know that the 27' iMac BEFORE it was given the Thunderbolt ports had MiniDP input. If your iMac is any older than that one, I am not sure. But the adapter should allow you to output to any DVI or HDMI display, depending on which adapter you get.

Can i run lion on my macbook 4.1?

Can i run lion on my macbook 4.1?

Lion General requirements
Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7, or Xeon processor
2GB of memory
OS X v10.6.6 or later (v10.6.8 recommended)
7GB of available space

Can I install again my new software after 2-3 months when I buy a new Computer?Thank you

Can I install again my new software after 2-3 months when I buy a new Computer?Thank you

Yes. Also, you are allowed to have the software installed and active on two machines, so if you like you can continue to have it on the original machine. If you want to remove it from the original machine be sure to deactivate it first.

HT4623 I can't turn on my new iphone after updating ios as recommended.

I can't turn on my new iphone after updating ios as recommended. I can't access apple support and chat b/c I can't access my serial number as I can't get on my phone. I can't call them for the same **** reason. Holding down the on button(s) as per google does not work. Itunes says my phone is in "recovery" and needs to be "restored". I don't know what this means. Very frustrated. Please help. I need my stupid phone. On the verge of beginning to hate apple...

It's hard to tell what went wrong. Some possibilities:
1. Your iPhone did not have enough free space. Once it works, check Settings > General > Usage
2. There was an issue with your internet connection so the update did not download properly.
3. One of the many update steps got interrupted somehow

Can I migrate an old MacBook (2008) running Lion to new MacBook Air running Yosemite?

Hey all,
I'm planning on helping my aunt migrate her trusted old 2008 MacBook (white, non-alu) running OSX Lion 10.7.5 to a brand new MacBook Air running Yosemite.
Is such a migration between the mentioned two versions possible? Or is Lion 10.7.5 too dated for a successful migration to Yosemite?
I hope someone can provide an answer - I would like things to go smoothly for her.
Lemme know

Hi jwrusa,
Welcome to the Apple Support Communities!
You can transfer information from a 10.7 to a 10.10 computer. Please use read over and use the information located in the following article for further information.
OS X Yosemite: Transfer your info from a computer or storage device
Cheers,
Joe

How can I get my CS$ to work on my new Macbook after a migration?

Please somebody help me get my CS4 to work on my new MacBook. I deactivated on the old one, and the Apple store installed it on this one before the deactivation. Is there any hope? This is so frustrating and Adobe is not much help.

You haven't told us what actually the problem is. If you get the 150:30 licensing error, run the cleaner tool and reinstall the program properly. It's a known fact that using the Migration Assistant doesn't work with Adobe software due to the specifics of the activation system...
Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
Download CS4 products
Mylenium

Can't activate Photoshop on new MacBook Pro

Program Version: Photoshop Elements 8.
I just purchased a new MacBook Pro today to replace my three year old MacBook. I sold my old MacBook after I backed it up onto an external hard disk via Time Machine. I have used migration assistant to import everything back onto my new Macintosh and Photoshop throws an error saying that I cannot activate Photoshop because the serial number has been activated more than once (It is also used on my iMac).
My old MacBook has been reformatted and is no longer with me so I cannot go back and deactivate that copy of Photoshop (I have eBay records and emails showing the selling and reformatting of my old Macintosh for proof). What should I do? Who do I talk to? I do not want to purchase another copy of Photoshop. I use Photoshop for graphics in Web Development in University so I need it back up and running!
Thank You.
~Benjamin Anderson

Yes, I realized that afterwards. To contact support for activation problems, go to the very bottom of the web page and click the Contact Adobe link and you'll see a place on the first tab for activation/deactivation. There are phone numbers in a drop down on the right side of the tab. Sorry, I can't link directly because I only get the US numbers here.

Login invalid on new MacBook after Migration Assistant

Migration Assistant problem
New computer: 15" MacBook Pro with Retina display (probably OS X Lion
Old computer: 15"Macbook Pro running Mountain lion.
My regular login password is invalid on the new computer after migration assistant - Not sure what to do.
Any help is greatly appreciated.
Thanks

I managed to find a solution
Here is the link:
http://osxdaily.com/2010/08/10/forgot-mac-password-how-to-reset-mac-password/
There are instructions to reset the mac password without a CD. You set up a new admin account then you can reset the password to your original account.
It solved the problem.

Can't get ibooks onto new macbook pro

Hi
I got myself a new macbook pro set it up and all great ibooks came up right away but my sister in law got the same macbook pro as i but i cannot get ibooks onto it, i have been to the app store but its not there i really cannot remember howi got mine onto my macbook, i think its when i set my macbook pro it asks you questions and then to setup your apple id in the set up process, well we had difficulty in trying to sign her in as it would not accept the password, even tho i have gone into iTunes and signed her in ok but not in set up, so we skipped that, so now we cannot put her iPad onto the iTunes on macbook either, is that why we cannot load the ibooks app onto the macbook because we cannot get her iPad hooked to iTunes,?
gosh hope you can understand me again lol
I have just asked a question about the set up so sorry i am repeating my self but this one was about the ibooks.
Hope you can help.
many thanks
Tracey xx

Hello Traceykate,
iBooks for Mac is part of the OS X Mavericks. Check to see what version of OS X you and your sister are running. If you one of them is not updated, then go to the Mac App Store and download OS X Mavericks and you should be able to have iBooks. Check out the articles below for more information about iBooks for Mac, how to check what version of OS X you are running and a link to download Mavericks.
About iBooks for Mac
http://support.apple.com/kb/ht5953
OS X: Finding your OS version and build information
http://support.apple.com/kb/ht1633
OS X Mavericks
https://itunes.apple.com/us/app/os-x-mavericks/id675248567?mt=12
Regards,
-Norm G.

Can I upgrade to the new MacBook Pro from PowerBook copying the hard disk?

I have a Power Book G4 17", now I'm going to buy a new MacBook pro 17" and want to transfer the same software (I mean the whole content of my actual HD) to the new MacBook Pro using SuperDuper!
I want to know if the Intel based MacBook Pro can run the same operating system configured in the PowerBook or I must install first the Mac OSX on the new MacBook pro and then reinstalla manually all the applications/documents?
Marcello
PowerBook G4 17" Mac OS X (10.4.8)
PowerBook G4 17" Mac OS X (10.4.8)

Hi Marcello,
first of all: WELCOME TO THE DISCUSSIONS!
No to both of your questions:
No, you cannot clone the PPC hard disk to a new Intel disk. The systems are completely different.
No, you don't have to reinstall all your software manually.
You have to install Tiger from the install DVD that shipped with that MacBook Pro. You CANNOT use any other install disk, so take care you don't damage it! Once this is done you can transfer all your data, applications and settings from the old computer using the migration assistant in /Applications/Utilities.
Be aware that there might be problems with applications that are not universal binaries and require Rosetta emulation: Intel-based Mac: Some migrated applications may need to be updated.
If this answered your question please consider granting some stars: Why reward points?

Can't run Azureus on new MacBook after moving account

Similar Messages

Maybe you are looking for