Can't run cinnamon in 3D mode

Hi
I have just installed arch and i want to use cinnamon desktop.
I installed gdm , cinnamon , xorg-xinit , xorg-server and similar packages from AUR.
I also installed xf86-video-intel and xf86-video-ati for my switchable inel and radeon cards.
But , when i start cinnamon from gdm , it says " Oops an error occured " and i can't recover.
I can use cinnamon(software rendering) without any problem.
"lspci | grep VGA" gives
00:02.0 VGA compatible controller: Intel Corporation 3rd Gen Core processor Graphics Controller (rev 09)
01:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Thames [Radeon HD 7500M/7600M Series] (rev ff)
/var/log/Xorg.0.log after running startx gives
[   448.124]
X.Org X Server 1.15.1
Release Date: 2014-04-13
[   448.124] X Protocol Version 11, Revision 0
[   448.125] Build Operating System: Linux 3.14.0-4-ARCH x86_64
[   448.125] Current Operating System: Linux arch 3.14.6-1-ARCH #1 SMP PREEMPT Sun Jun 8 10:08:38 CEST 2014 x86_64
[   448.125] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=8cbb4fa5-9f1a-45d6-9faf-d2ee5840a2cb rw quiet
[   448.125] Build Date: 14 April 2014  08:39:09AM
[   448.125] 
[   448.125] Current version of pixman: 0.32.4
[   448.125]     Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
[   448.125] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[   448.126] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Jun 14 23:07:52 2014
[   448.126] (==) Using config directory: "/etc/X11/xorg.conf.d"
[   448.126] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[   448.126] (==) No Layout section.  Using the first Screen section.
[   448.126] (==) No screen section available. Using defaults.
[   448.126] (**) |-->Screen "Default Screen Section" (0)
[   448.126] (**) |   |-->Monitor "<default monitor>"
[   448.126] (==) No device specified for screen "Default Screen Section".
    Using the first device section listed.
[   448.126] (**) |   |-->Device "Radeon"
[   448.126] (==) No monitor specified for screen "Default Screen Section".
    Using a default monitor configuration.
[   448.126] (==) Automatically adding devices
[   448.126] (==) Automatically enabling devices
[   448.126] (==) Automatically adding GPU devices
[   448.126] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[   448.126]     Entry deleted from font path.
[   448.126] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[   448.126]     Entry deleted from font path.
[   448.126] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[   448.126]     Entry deleted from font path.
[   448.126]     (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[   448.126] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[   448.126]     Entry deleted from font path.
[   448.126]     (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[   448.126] (==) FontPath set to:
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/
[   448.126] (==) ModulePath set to "/usr/lib/xorg/modules"
[   448.126] (II) The server relies on udev to provide the list of input devices.
    If no devices become available, reconfigure udev or disable AutoAddDevices.
[   448.127] (II) Loader magic: 0x804c80
[   448.127] (II) Module ABI versions:
[   448.127]     X.Org ANSI C Emulation: 0.4
[   448.127]     X.Org Video Driver: 15.0
[   448.127]     X.Org XInput driver : 20.0
[   448.127]     X.Org Server Extension : 8.0
[   448.127] (II) xfree86: Adding drm device (/dev/dri/card0)
[   448.930] (II) xfree86: Adding drm device (/dev/dri/card1)
[   448.933] (--) PCI:*(0:0:2:0) 8086:0166:103c:183e rev 9, Mem @ 0xc3000000/4194304, 0xb0000000/268435456, I/O @ 0x00005000/64
[   448.933] (--) PCI: (0:1:0:0) 1002:6840:103c:183e rev 0, Mem @ 0xa0000000/268435456, 0xc2000000/131072, I/O @ 0x00004000/256, BIOS @ 0x????????/131072
[   448.933] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[   448.933] Initializing built-in extension Generic Event Extension
[   448.934] Initializing built-in extension SHAPE
[   448.936] Initializing built-in extension MIT-SHM
[   448.938] Initializing built-in extension XInputExtension
[   448.939] Initializing built-in extension XTEST
[   448.941] Initializing built-in extension BIG-REQUESTS
[   448.942] Initializing built-in extension SYNC
[   448.944] Initializing built-in extension XKEYBOARD
[   448.945] Initializing built-in extension XC-MISC
[   448.947] Initializing built-in extension SECURITY
[   448.948] Initializing built-in extension XINERAMA
[   448.949] Initializing built-in extension XFIXES
[   448.951] Initializing built-in extension RENDER
[   448.952] Initializing built-in extension RANDR
[   448.953] Initializing built-in extension COMPOSITE
[   448.954] Initializing built-in extension DAMAGE
[   448.956] Initializing built-in extension MIT-SCREEN-SAVER
[   448.957] Initializing built-in extension DOUBLE-BUFFER
[   448.958] Initializing built-in extension RECORD
[   448.959] Initializing built-in extension DPMS
[   448.960] Initializing built-in extension Present
[   448.961] Initializing built-in extension DRI3
[   448.962] Initializing built-in extension X-Resource
[   448.963] Initializing built-in extension XVideo
[   448.964] Initializing built-in extension XVideo-MotionCompensation
[   448.965] Initializing built-in extension XFree86-VidModeExtension
[   448.966] Initializing built-in extension XFree86-DGA
[   448.967] Initializing built-in extension XFree86-DRI
[   448.968] Initializing built-in extension DRI2
[   448.968] (II) "glx" will be loaded by default.
[   448.968] (II) LoadModule: "dri2"
[   448.968] (II) Module "dri2" already built-in
[   448.968] (II) LoadModule: "glamoregl"
[   448.968] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[   448.970] (II) Module glamoregl: vendor="X.Org Foundation"
[   448.970]     compiled for 1.15.0, module version = 0.6.0
[   448.970]     ABI class: X.Org ANSI C Emulation, version 0.4
[   448.970] (II) LoadModule: "glx"
[   448.970] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[   448.970] (II) Module glx: vendor="X.Org Foundation"
[   448.970]     compiled for 1.15.1, module version = 1.0.0
[   448.970]     ABI class: X.Org Server Extension, version 8.0
[   448.970] (==) AIGLX enabled
[   448.971] Loading extension GLX
[   448.971] (II) LoadModule: "radeon"
[   448.971] (II) Loading /usr/lib/xorg/modules/drivers/radeon_drv.so
[   448.972] (II) Module radeon: vendor="X.Org Foundation"
[   448.972]     compiled for 1.15.0, module version = 7.3.0
[   448.972]     Module class: X.Org Video Driver
[   448.972]     ABI class: X.Org Video Driver, version 15.0
[   448.972] (II) RADEON: Driver for ATI Radeon chipsets:
    ATI Radeon Mobility X600 (M24) 3150 (PCIE), ATI FireMV 2400 (PCI),
    ATI Radeon Mobility X300 (M24) 3152 (PCIE),
    ATI FireGL M24 GL 3154 (PCIE), ATI FireMV 2400 3155 (PCI),
    ATI Radeon X600 (RV380) 3E50 (PCIE),
    ATI FireGL V3200 (RV380) 3E54 (PCIE), ATI Radeon IGP320 (A3) 4136,
    ATI Radeon IGP330/340/350 (A4) 4137, ATI Radeon 9500 AD (AGP),
    ATI Radeon 9500 AE (AGP), ATI Radeon 9600TX AF (AGP),
    ATI FireGL Z1 AG (AGP), ATI Radeon 9800SE AH (AGP),
    ATI Radeon 9800 AI (AGP), ATI Radeon 9800 AJ (AGP),
    ATI FireGL X2 AK (AGP), ATI Radeon 9600 AP (AGP),
    ATI Radeon 9600SE AQ (AGP), ATI Radeon 9600XT AR (AGP),
    ATI Radeon 9600 AS (AGP), ATI FireGL T2 AT (AGP), ATI Radeon 9650,
    ATI FireGL RV360 AV (AGP), ATI Radeon 7000 IGP (A4+) 4237,
    ATI Radeon 8500 AIW BB (AGP), ATI Radeon IGP320M (U1) 4336,
    ATI Radeon IGP330M/340M/350M (U2) 4337,
    ATI Radeon Mobility 7000 IGP 4437, ATI Radeon 9000/PRO If (AGP/PCI),
    ATI Radeon 9000 Ig (AGP/PCI), ATI Radeon X800 (R420) JH (AGP),
    ATI Radeon X800PRO (R420) JI (AGP),
    ATI Radeon X800SE (R420) JJ (AGP), ATI Radeon X800 (R420) JK (AGP),
    ATI Radeon X800 (R420) JL (AGP), ATI FireGL X3 (R420) JM (AGP),
    ATI Radeon Mobility 9800 (M18) JN (AGP),
    ATI Radeon X800 SE (R420) (AGP), ATI Radeon X800XT (R420) JP (AGP),
    ATI Radeon X800 VE (R420) JT (AGP), ATI Radeon X850 (R480) (AGP),
    ATI Radeon X850 XT (R480) (AGP), ATI Radeon X850 SE (R480) (AGP),
    ATI Radeon X850 PRO (R480) (AGP), ATI Radeon X850 XT PE (R480) (AGP),
    ATI Radeon Mobility M7 LW (AGP),
    ATI Mobility FireGL 7800 M7 LX (AGP),
    ATI Radeon Mobility M6 LY (AGP), ATI Radeon Mobility M6 LZ (AGP),
    ATI FireGL Mobility 9000 (M9) Ld (AGP),
    ATI Radeon Mobility 9000 (M9) Lf (AGP),
    ATI Radeon Mobility 9000 (M9) Lg (AGP), ATI FireMV 2400 PCI,
    ATI Radeon 9700 Pro ND (AGP), ATI Radeon 9700/9500Pro NE (AGP),
    ATI Radeon 9600TX NF (AGP), ATI FireGL X1 NG (AGP),
    ATI Radeon 9800PRO NH (AGP), ATI Radeon 9800 NI (AGP),
    ATI FireGL X2 NK (AGP), ATI Radeon 9800XT NJ (AGP),
    ATI Radeon Mobility 9600/9700 (M10/M11) NP (AGP),
    ATI Radeon Mobility 9600 (M10) NQ (AGP),
    ATI Radeon Mobility 9600 (M11) NR (AGP),
    ATI Radeon Mobility 9600 (M10) NS (AGP),
    ATI FireGL Mobility T2 (M10) NT (AGP),
    ATI FireGL Mobility T2e (M11) NV (AGP), ATI Radeon QD (AGP),
    ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
    ATI FireGL 8700/8800 QH (AGP), ATI Radeon 8500 QL (AGP),
    ATI Radeon 9100 QM (AGP), ATI Radeon 7500 QW (AGP/PCI),
    ATI Radeon 7500 QX (AGP/PCI), ATI Radeon VE/7000 QY (AGP/PCI),
    ATI Radeon VE/7000 QZ (AGP/PCI), ATI ES1000 515E (PCI),
    ATI Radeon Mobility X300 (M22) 5460 (PCIE),
    ATI Radeon Mobility X600 SE (M24C) 5462 (PCIE),
    ATI FireGL M22 GL 5464 (PCIE), ATI Radeon X800 (R423) UH (PCIE),
    ATI Radeon X800PRO (R423) UI (PCIE),
    ATI Radeon X800LE (R423) UJ (PCIE),
    ATI Radeon X800SE (R423) UK (PCIE),
    ATI Radeon X800 XTP (R430) (PCIE), ATI Radeon X800 XL (R430) (PCIE),
    ATI Radeon X800 SE (R430) (PCIE), ATI Radeon X800 (R430) (PCIE),
    ATI FireGL V7100 (R423) (PCIE), ATI FireGL V5100 (R423) UQ (PCIE),
    ATI FireGL unknown (R423) UR (PCIE),
    ATI FireGL unknown (R423) UT (PCIE),
    ATI Mobility FireGL V5000 (M26) (PCIE),
    ATI Mobility FireGL V5000 (M26) (PCIE),
    ATI Mobility Radeon X700 XL (M26) (PCIE),
    ATI Mobility Radeon X700 (M26) (PCIE),
    ATI Mobility Radeon X700 (M26) (PCIE),
    ATI Radeon X550XTX 5657 (PCIE), ATI Radeon 9100 IGP (A5) 5834,
    ATI Radeon Mobility 9100 IGP (U3) 5835,
    ATI Radeon XPRESS 200 5954 (PCIE),
    ATI Radeon XPRESS 200M 5955 (PCIE), ATI Radeon 9250 5960 (AGP),
    ATI Radeon 9200 5961 (AGP), ATI Radeon 9200 5962 (AGP),
    ATI Radeon 9200SE 5964 (AGP), ATI FireMV 2200 (PCI),
    ATI ES1000 5969 (PCI), ATI Radeon XPRESS 200 5974 (PCIE),
    ATI Radeon XPRESS 200M 5975 (PCIE),
    ATI Radeon XPRESS 200 5A41 (PCIE),
    ATI Radeon XPRESS 200M 5A42 (PCIE),
    ATI Radeon XPRESS 200 5A61 (PCIE),
    ATI Radeon XPRESS 200M 5A62 (PCIE),
    ATI Radeon X300 (RV370) 5B60 (PCIE),
    ATI Radeon X600 (RV370) 5B62 (PCIE),
    ATI Radeon X550 (RV370) 5B63 (PCIE),
    ATI FireGL V3100 (RV370) 5B64 (PCIE),
    ATI FireMV 2200 PCIE (RV370) 5B65 (PCIE),
    ATI Radeon Mobility 9200 (M9+) 5C61 (AGP),
    ATI Radeon Mobility 9200 (M9+) 5C63 (AGP),
    ATI Mobility Radeon X800 XT (M28) (PCIE),
    ATI Mobility FireGL V5100 (M28) (PCIE),
    ATI Mobility Radeon X800 (M28) (PCIE), ATI Radeon X850 5D4C (PCIE),
    ATI Radeon X850 XT PE (R480) (PCIE),
    ATI Radeon X850 SE (R480) (PCIE), ATI Radeon X850 PRO (R480) (PCIE),
    ATI unknown Radeon / FireGL (R480) 5D50 (PCIE),
    ATI Radeon X850 XT (R480) (PCIE),
    ATI Radeon X800XT (R423) 5D57 (PCIE),
    ATI FireGL V5000 (RV410) (PCIE), ATI Radeon X700 XT (RV410) (PCIE),
    ATI Radeon X700 PRO (RV410) (PCIE),
    ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X700 (RV410) (PCIE),
    ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X1800,
    ATI Mobility Radeon X1800 XT, ATI Mobility Radeon X1800,
    ATI Mobility FireGL V7200, ATI FireGL V7200, ATI FireGL V5300,
    ATI Mobility FireGL V7100, ATI Radeon X1800, ATI Radeon X1800,
    ATI Radeon X1800, ATI Radeon X1800, ATI Radeon X1800,
    ATI FireGL V7300, ATI FireGL V7350, ATI Radeon X1600, ATI RV505,
    ATI Radeon X1300/X1550, ATI Radeon X1550, ATI M54-GL,
    ATI Mobility Radeon X1400, ATI Radeon X1300/X1550,
    ATI Radeon X1550 64-bit, ATI Mobility Radeon X1300,
    ATI Mobility Radeon X1300, ATI Mobility Radeon X1300,
    ATI Mobility Radeon X1300, ATI Radeon X1300, ATI Radeon X1300,
    ATI RV505, ATI RV505, ATI FireGL V3300, ATI FireGL V3350,
    ATI Radeon X1300, ATI Radeon X1550 64-bit, ATI Radeon X1300/X1550,
    ATI Radeon X1600, ATI Radeon X1300/X1550, ATI Mobility Radeon X1450,
    ATI Radeon X1300/X1550, ATI Mobility Radeon X2300,
    ATI Mobility Radeon X2300, ATI Mobility Radeon X1350,
    ATI Mobility Radeon X1350, ATI Mobility Radeon X1450,
    ATI Radeon X1300, ATI Radeon X1550, ATI Mobility Radeon X1350,
    ATI FireMV 2250, ATI Radeon X1550 64-bit, ATI Radeon X1600,
    ATI Radeon X1650, ATI Radeon X1600, ATI Radeon X1600,
    ATI Mobility FireGL V5200, ATI Mobility Radeon X1600,
    ATI Radeon X1650, ATI Radeon X1650, ATI Radeon X1600,
    ATI Radeon X1300 XT/X1600 Pro, ATI FireGL V3400,
    ATI Mobility FireGL V5250, ATI Mobility Radeon X1700,
    ATI Mobility Radeon X1700 XT, ATI FireGL V5200,
    ATI Mobility Radeon X1700, ATI Radeon X2300HD,
    ATI Mobility Radeon HD 2300, ATI Mobility Radeon HD 2300,
    ATI Radeon X1950, ATI Radeon X1900, ATI Radeon X1950,
    ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
    ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
    ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
    ATI AMD Stream Processor, ATI Radeon X1900, ATI Radeon X1950,
    ATI RV560, ATI RV560, ATI Mobility Radeon X1900, ATI RV560,
    ATI Radeon X1950 GT, ATI RV570, ATI RV570, ATI FireGL V7400,
    ATI RV560, ATI Radeon X1650, ATI Radeon X1650, ATI RV560,
    ATI Radeon 9100 PRO IGP 7834, ATI Radeon Mobility 9200 IGP 7835,
    ATI Radeon X1200, ATI Radeon X1200, ATI Radeon X1200,
    ATI Radeon X1200, ATI Radeon X1200, ATI RS740, ATI RS740M, ATI RS740,
    ATI RS740M, ATI Radeon HD 2900 XT, ATI Radeon HD 2900 XT,
    ATI Radeon HD 2900 XT, ATI Radeon HD 2900 Pro, ATI Radeon HD 2900 GT,
    ATI FireGL V8650, ATI FireGL V8600, ATI FireGL V7600,
    ATI Radeon 4800 Series, ATI Radeon HD 4870 x2,
    ATI Radeon 4800 Series, ATI Radeon HD 4850 x2,
    ATI FirePro V8750 (FireGL), ATI FirePro V7760 (FireGL),
    ATI Mobility RADEON HD 4850, ATI Mobility RADEON HD 4850 X2,
    ATI Radeon 4800 Series, ATI FirePro RV770, AMD FireStream 9270,
    AMD FireStream 9250, ATI FirePro V8700 (FireGL),
    ATI Mobility RADEON HD 4870, ATI Mobility RADEON M98,
    ATI Mobility RADEON HD 4870, ATI Radeon 4800 Series,
    ATI Radeon 4800 Series, ATI FirePro M7750, ATI M98, ATI M98, ATI M98,
    ATI Mobility Radeon HD 4650, ATI Radeon RV730 (AGP),
    ATI Mobility Radeon HD 4670, ATI FirePro M5750,
    ATI Mobility Radeon HD 4670, ATI Radeon RV730 (AGP),
    ATI RV730XT [Radeon HD 4670], ATI RADEON E4600,
    ATI Radeon HD 4600 Series, ATI RV730 PRO [Radeon HD 4650],
    ATI FirePro V7750 (FireGL), ATI FirePro V5700 (FireGL),
    ATI FirePro V3750 (FireGL), ATI Mobility Radeon HD 4830,
    ATI Mobility Radeon HD 4850, ATI FirePro M7740, ATI RV740,
    ATI Radeon HD 4770, ATI Radeon HD 4700 Series, ATI Radeon HD 4770,
    ATI FirePro M5750, ATI RV610, ATI Radeon HD 2400 XT,
    ATI Radeon HD 2400 Pro, ATI Radeon HD 2400 PRO AGP, ATI FireGL V4000,
    ATI RV610, ATI Radeon HD 2350, ATI Mobility Radeon HD 2400 XT,
    ATI Mobility Radeon HD 2400, ATI RADEON E2400, ATI RV610,
    ATI FireMV 2260, ATI RV670, ATI Radeon HD3870,
    ATI Mobility Radeon HD 3850, ATI Radeon HD3850,
    ATI Mobility Radeon HD 3850 X2, ATI RV670,
    ATI Mobility Radeon HD 3870, ATI Mobility Radeon HD 3870 X2,
    ATI Radeon HD3870 X2, ATI FireGL V7700, ATI Radeon HD3850,
    ATI Radeon HD3690, AMD Firestream 9170, ATI Radeon HD 4550,
    ATI Radeon RV710, ATI Radeon RV710, ATI Radeon RV710,
    ATI Radeon HD 4350, ATI Mobility Radeon 4300 Series,
    ATI Mobility Radeon 4500 Series, ATI Mobility Radeon 4500 Series,
    ATI FirePro RG220, ATI Mobility Radeon 4330, ATI RV630,
    ATI Mobility Radeon HD 2600, ATI Mobility Radeon HD 2600 XT,
    ATI Radeon HD 2600 XT AGP, ATI Radeon HD 2600 Pro AGP,
    ATI Radeon HD 2600 XT, ATI Radeon HD 2600 Pro, ATI Gemini RV630,
    ATI Gemini Mobility Radeon HD 2600 XT, ATI FireGL V5600,
    ATI FireGL V3600, ATI Radeon HD 2600 LE,
    ATI Mobility FireGL Graphics Processor, ATI Radeon HD 3470,
    ATI Mobility Radeon HD 3430, ATI Mobility Radeon HD 3400 Series,
    ATI Radeon HD 3450, ATI Radeon HD 3450, ATI Radeon HD 3430,
    ATI Radeon HD 3450, ATI FirePro V3700, ATI FireMV 2450,
    ATI FireMV 2260, ATI FireMV 2260, ATI Radeon HD 3600 Series,
    ATI Radeon HD 3650 AGP, ATI Radeon HD 3600 PRO,
    ATI Radeon HD 3600 XT, ATI Radeon HD 3600 PRO,
    ATI Mobility Radeon HD 3650, ATI Mobility Radeon HD 3670,
    ATI Mobility FireGL V5700, ATI Mobility FireGL V5725,
    ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
    ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
    ATI Radeon HD 3300 Graphics, ATI Radeon HD 3200 Graphics,
    ATI Radeon 3000 Graphics, SUMO, SUMO, SUMO2, SUMO2, SUMO2, SUMO2,
    SUMO, SUMO, SUMO2, SUMO, SUMO, SUMO, SUMO, SUMO, ATI Radeon HD 4200,
    ATI Radeon 4100, ATI Mobility Radeon HD 4200,
    ATI Mobility Radeon 4100, ATI Radeon HD 4290, ATI Radeon HD 4250,
    AMD Radeon HD 6310 Graphics, AMD Radeon HD 6310 Graphics,
    AMD Radeon HD 6250 Graphics, AMD Radeon HD 6250 Graphics,
    AMD Radeon HD 6300 Series Graphics,
    AMD Radeon HD 6200 Series Graphics, PALM, PALM, PALM, CYPRESS,
    ATI FirePro (FireGL) Graphics Adapter,
    ATI FirePro (FireGL) Graphics Adapter,
    ATI FirePro (FireGL) Graphics Adapter, AMD Firestream 9370,
    AMD Firestream 9350, ATI Radeon HD 5800 Series,
    ATI Radeon HD 5800 Series, ATI Radeon HD 5800 Series,
    ATI Radeon HD 5800 Series, ATI Radeon HD 5900 Series,
    ATI Radeon HD 5900 Series, ATI Mobility Radeon HD 5800 Series,
    ATI Mobility Radeon HD 5800 Series,
    ATI FirePro (FireGL) Graphics Adapter,
    ATI FirePro (FireGL) Graphics Adapter,
    ATI Mobility Radeon HD 5800 Series, ATI Radeon HD 5700 Series,
    ATI Radeon HD 5700 Series, ATI Radeon HD 6700 Series,
    ATI Radeon HD 5700 Series, ATI Radeon HD 6700 Series,
    ATI Mobility Radeon HD 5000 Series,
    ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon HD 5570,
    ATI FirePro (FireGL) Graphics Adapter,
    ATI FirePro (FireGL) Graphics Adapter, ATI Radeon HD 5670,
    ATI Radeon HD 5570, ATI Radeon HD 5500 Series, REDWOOD,
    ATI Mobility Radeon HD 5000 Series,
    ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon Graphics,
    ATI Mobility Radeon Graphics, CEDAR,
    ATI FirePro (FireGL) Graphics Adapter,
    ATI FirePro (FireGL) Graphics Adapter, ATI FirePro 2270, CEDAR,
    ATI Radeon HD 5450, CEDAR, CEDAR, CAYMAN, CAYMAN, CAYMAN, CAYMAN,
    CAYMAN, CAYMAN, CAYMAN, CAYMAN, CAYMAN, CAYMAN,
    AMD Radeon HD 6900 Series, AMD Radeon HD 6900 Series, CAYMAN, CAYMAN,
    CAYMAN, AMD Radeon HD 6900M Series, Mobility Radeon HD 6000 Series,
    BARTS, BARTS, Mobility Radeon HD 6000 Series,
    Mobility Radeon HD 6000 Series, BARTS, BARTS, BARTS, BARTS,
    AMD Radeon HD 6800 Series, AMD Radeon HD 6800 Series,
    AMD Radeon HD 6700 Series, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
    TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
    TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
    CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS,
    CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, ARUBA, ARUBA,
    ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA,
    ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA,
    ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA,
    ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, TAHITI, TAHITI, TAHITI, TAHITI,
    TAHITI, TAHITI, TAHITI, TAHITI, TAHITI, TAHITI, TAHITI, TAHITI,
    TAHITI, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN,
    PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN,
    VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE,
    VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE,
    VERDE, VERDE, VERDE, OLAND, OLAND, OLAND, OLAND, OLAND, OLAND, OLAND,
    OLAND, OLAND, OLAND, OLAND, OLAND, OLAND, HAINAN, HAINAN, HAINAN,
    HAINAN, HAINAN, HAINAN, BONAIRE, BONAIRE, BONAIRE, BONAIRE, BONAIRE,
    BONAIRE, BONAIRE, BONAIRE, KABINI, KABINI, KABINI, KABINI, KABINI,
    KABINI, KABINI, KABINI, KABINI, KABINI, KABINI, KABINI, KABINI,
    KABINI, KABINI, KABINI, KAVERI, KAVERI, KAVERI, KAVERI, KAVERI,
    KAVERI, KAVERI, KAVERI, KAVERI, KAVERI, KAVERI, KAVERI, KAVERI,
    KAVERI, KAVERI, KAVERI, KAVERI, KAVERI, KAVERI, KAVERI, KAVERI,
    HAWAII, HAWAII, HAWAII, HAWAII, HAWAII, HAWAII, HAWAII, HAWAII,
    HAWAII, HAWAII, HAWAII, HAWAII
[   448.978] (++) using VT number 2
[   448.978] (II) [KMS] Kernel modesetting enabled.
[   448.978] (EE) No devices detected.
[   448.978] (EE)
Fatal server error:
[   448.978] (EE) no screens found(EE)
[   448.978] (EE)
Please consult the The X.Org Foundation support
     at http://wiki.x.org
for help.
[   448.978] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[   448.978] (EE)
The above log file occurs when I create 20-radeon.conf as per the wiki( https://wiki.archlinux.org/index.php/ATI#Configuration)
However if i remove this 20-radeon.conf file , and run startx , the x server starts but crashes immediately.
Please look into this matter , whether i continue on arch or settle back on ubuntu depends on this
Thanks in advance

You're using a laptop with hybrid graphics, correct? If so, you may want to check the wiki articles on hybrid graphics and PRIME. PRIME allows you to use hybrid graphics properly, and the hybrid graphics article has some important notes on ATI cards. You can also check out the bumblebee branch that supports ATI, but good luck, it doesn't seem to be having much success.
If you can't get the open source drivers to work, you can try the proprietary drivers.
Last edited by Ekkoria (2014-06-14 15:33:55)

Similar Messages

  • Can't Run program in Debug Mode

    To: [email protected]
    cc:
    Subject: Can't Run program in Debug Mode
    Has anyone else experienced this problem? We have written a non-express
    program that uses the Express generated services project as a supplier
    plan. However, when we try running this program in debug mode about 50%
    (or more) of the time we abend while Forte is trying to partition the
    application. Since we have many database classes in our Business Model we
    are wondering if Forte is timing out during the partition phase or if the
    server partition is running out of memory . The following error messages
    are produced by Forte. Any suggestions???
    =======================
    Error messages on client:
    =======================
    SYSTEM ERROR: Unable to start the partition testacadprogoffer_CL0_Part1 on
    any
    of the nodes to which it has been assigned. See the remainder of the
    error
    stack for more information.
    Class: qqsp_ResourceException
    Error #: [1602, 593]
    Detected at: qqcf_StandardConfig::LoadRemotePartition at 5
    Last TOOL statement: method overview.StartApplication
    Error Time: Tue Dec 02 12:56:01
    Exception occurred (locally) on partition "Express_cl7_Client",
    (partitionId = F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3,
    taskId =
    [F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3.226]) in application
    "FTLaunch_cl0", pid 65 on node DWILBUR_NTWS in environment
    CentralEnv.
    SYSTEM ERROR: Unable to start partition testacadprogoffer_CL0_Part1 on node
    admin2.
    Class: qqsp_ErrorDescriptor
    Error #: [1602, 592]
    Detected at: qqcf_StandardConfig::LoadRemotePartition at 3
    Error Time: Tue Dec 02 12:56:01
    Exception occurred (locally) on partition "Express_cl7_Client",
    (partitionId = F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3,
    taskId =
    [F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3.226]) in application
    "FTLaunch_cl0", pid 65 on node DWILBUR_NTWS in environment
    CentralEnv.
    SYSTEM ERROR: Lost contact with remote server while trying to load
    partition
    testacadprogoffer_CL0_Part1. Check server log file for more information
    about
    the specific problem.
    Class: qqsp_ResourceException
    Error #: [1301, 102]
    Detected at: qqem_IPartitionAgent::Startup at 5
    Error Time: Tue Dec 02 12:56:01
    Exception occurred (locally) on partition "Express_cl7_Client",
    (partitionId = F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3,
    taskId =
    [F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3.226]) in application
    "FTLaunch_cl0", pid 65 on node DWILBUR_NTWS in environment
    CentralEnv.
    INFORMATION: The connection to the partner was terminated by the
    Communication
    Manager for the reasons below.
    Class: qqsp_DistAccessException
    Detected at: qqdo_PartitionMgr::StopLocation at 1
    Error Time: Tue Dec 02 12:56:00
    Distributed method called: qqrt_ForteExecAgentProxy.LoadPartition!6
    (object name Unnamed) from partition "Forte_Executor", (partitionId =
    F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9, taskId =
    [F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9.229]) in application
    "FTLaunch_cl0", pid 65 on node DWILBUR_NTWS in environment CentralEnv
    Exception occurred (locally) on partition "Express_cl7_Client",
    (partitionId = F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3,
    taskId =
    [F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3.226]) in application
    "FTLaunch_cl0", pid 65 on node DWILBUR_NTWS in environment
    CentralEnv.
    INFORMATION: Network partner closed connection. This usually means the
    process at the other end of the wire failed. Please go look there and
    find
    out why.
    Class: qqsp_DistAccessException
    Detected at: qqcm_HoseFSM::ReceivedClose at 2
    Error Time: Tue Dec 02 12:56:00
    Exception occurred (locally) on partition "Express_cl7_Client",
    (partitionId = F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3,
    taskId =
    [F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3.226]) in application
    "FTLaunch_cl0", pid 65 on node DWILBUR_NTWS in environment
    CentralEnv.
    INFORMATION: Received close: Connection aborted (10053).
    Class: qqsp_DistAccessException
    Detected at: qqcm_HoseFSM::ReceivedClose at 1
    Error Time: Tue Dec 02 12:56:00
    Exception occurred (locally) on partition "Express_cl7_Client",
    (partitionId = F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3,
    taskId =
    [F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3.226]) in application
    "FTLaunch_cl0", pid 65 on node DWILBUR_NTWS in environment
    CentralEnv.
    =======================
    Log messages on server:
    =======================
    Attached to manager for node admin2.
    aud Tue Dec 2 09:34:36 : Loading partition testacadprogoffer_cl0_Part2
    built on <unknown>.
    Attached to manager for node admin2.
    aud Tue Dec 2 09:41:58 : Shutting down partition as requested.
    aud Tue Dec 2 09:41:59 : Unloaded partition testacadprogoffer_cl0_Part2.
    aud Tue Dec 2 09:49:44 : Loading partition testacadprogoffer_cl0_Part2
    built on <unknown>.
    Attached to manager for node admin2.
    aud Tue Dec 2 10:00:11 : Shutting down partition as requested.
    aud Tue Dec 2 10:00:12 : Unloaded partition testacadprogoffer_cl0_Part2.
    aud Tue Dec 2 10:18:34 : Loading partition testacadprogoffer_cl0_Part3
    built on <unknown>.
    Attached to manager for node admin2.
    aud Tue Dec 2 10:27:00 : Shutting down partition as requested.
    aud Tue Dec 2 10:27:00 : Unloaded partition testacadprogoffer_cl0_Part3.
    aud Tue Dec 2 10:47:03 : Loading partition
    EvaluateApplRequirementsBO_CL0_Part1 built on <unknown>.
    Attached to manager for node admin2.
    aud Tue Dec 2 11:09:26 : Shutting down partition due to failure of agent
    owner's partition.
    aud Tue Dec 2 11:09:26 : Shutting down partition as requested.
    aud Tue Dec 2 11:09:26 : Unloaded partition
    EvaluateApplRequirementsBO_CL0_Part1.
    aud Tue Dec 2 12:36:14 : Loading partition testacadprogoffer_CL0_Part1
    built on <unknown>.
    Attached to manager for node admin2.
    aud Tue Dec 2 12:45:17 : Shutting down partition as requested.
    aud Tue Dec 2 12:45:17 : Unloaded partition testacadprogoffer_CL0_Part1.
    FATAL ERROR: Out of Memory (reason = qqOS_MM_EX_OUT_OF_MEMORY)
    FATAL ERROR: Out of Memory (reason = qqOS_MM_EX_OUT_OF_MEMORY)
    Task 11: qqcm_HoseRecvServiceTask::Run: Caught unexpected exception
    FATAL ERROR: ************* Out of Memory, requested (1K) available (0K)
    Class: qqsp_ResourceException with ReasonCode: SP_ER_OUTOFMEMORY
    Detected at: qqos_MemoryManager
    Error Time: Tue Dec 2 12:49:01
    Exception occurred (locally) on partition "Forte_Executor",
    (partitionId = F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10f3, t
    askId = [F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10f3.11]) in application
    "Forte Runtime", pid 14020 on node admin2 in environ
    ment CentralEnv.
    FATAL ERROR: ************* Out of Memory, requested (1K) available (0K)
    Class: qqsp_ResourceException with ReasonCode: SP_ER_OUTOFMEMORY
    Detected at: qqos_MemoryManager
    Error Time: Tue Dec 2 12:48:57
    FATAL ERROR: Out of Memory (reason = qqOS_MM_EX_OUT_OF_MEMORY)
    FATAL ERROR: Out of Memory (reason = qqOS_MM_EX_OUT_OF_MEMORY)
    ERROR: TMgr.RunThread: task cm.Recv failed terminating.
    Probably caused by a FATAL exception.
    David Wilbur email: [email protected]
    University of Windsor phone: 519-253-3000 ext. 2779
    Windsor, Ontario Canada
    -----------------------------------------------

    Hi,
    We have had the same problem in a non-express application
    with a heavy server partition. In our case, the error was not
    systematic, depending on the server workload at the time we
    tried to partition and run.
    The work-around we're using is to put the -fm flags (increasing the x
    parameter to say 30000) in the 'server arguments' of your server
    partition
    properties in the partition workshop. Note that if your server is a Unix
    platform,
    you need to put double-quotes before and after the parenthesis in the -fm
    syntax.
    Hope this helps,
    Vincent Figari
    BTW, what Forte version are you using ?
    On Tue, 2 Dec 1997 13:44:24 -0500 "David Wilbur"<[email protected]>
    writes:
    >
    >
    >
    >
    >
    To: [email protected]
    cc:
    Subject: Can't Run program in Debug Mode
    Has anyone else experienced this problem? We have written a
    non-express
    program that uses the Express generated services project as a supplier
    plan. However, when we try running this program in debug mode about
    50%
    (or more) of the time we abend while Forte is trying to partition the
    application. Since we have many database classes in our Business
    Model we
    are wondering if Forte is timing out during the partition phase or if
    the
    server partition is running out of memory . The following error
    messages
    are produced by Forte. Any suggestions???
    =======================
    Error messages on client:
    =======================
    SYSTEM ERROR: Unable to start the partition
    testacadprogoffer_CL0_Part1 on
    any
    of the nodes to which it has been assigned. See the remainder of
    the
    error
    stack for more information.
    Class: qqsp_ResourceException
    Error #: [1602, 593]
    Detected at: qqcf_StandardConfig::LoadRemotePartition at 5
    Last TOOL statement: method overview.StartApplication
    Error Time: Tue Dec 02 12:56:01
    Exception occurred (locally) on partition "Express_cl7_Client",
    (partitionId = F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3,
    taskId =
    [F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3.226]) in
    application
    "FTLaunch_cl0", pid 65 on node DWILBUR_NTWS in environment
    CentralEnv.
    SYSTEM ERROR: Unable to start partition testacadprogoffer_CL0_Part1 on
    node
    admin2.
    Class: qqsp_ErrorDescriptor
    Error #: [1602, 592]
    Detected at: qqcf_StandardConfig::LoadRemotePartition at 3
    Error Time: Tue Dec 02 12:56:01
    Exception occurred (locally) on partition "Express_cl7_Client",
    (partitionId = F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3,
    taskId =
    [F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3.226]) in
    application
    "FTLaunch_cl0", pid 65 on node DWILBUR_NTWS in environment
    CentralEnv.
    SYSTEM ERROR: Lost contact with remote server while trying to load
    partition
    testacadprogoffer_CL0_Part1. Check server log file for more
    information
    about
    the specific problem.
    Class: qqsp_ResourceException
    Error #: [1301, 102]
    Detected at: qqem_IPartitionAgent::Startup at 5
    Error Time: Tue Dec 02 12:56:01
    Exception occurred (locally) on partition "Express_cl7_Client",
    (partitionId = F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3,
    taskId =
    [F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3.226]) in
    application
    "FTLaunch_cl0", pid 65 on node DWILBUR_NTWS in environment
    CentralEnv.
    INFORMATION: The connection to the partner was terminated by the
    Communication
    Manager for the reasons below.
    Class: qqsp_DistAccessException
    Detected at: qqdo_PartitionMgr::StopLocation at 1
    Error Time: Tue Dec 02 12:56:00
    Distributed method called:
    qqrt_ForteExecAgentProxy.LoadPartition!6
    (object name Unnamed) from partition "Forte_Executor",
    (partitionId =
    F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9, taskId =
    [F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9.229]) in
    application
    "FTLaunch_cl0", pid 65 on node DWILBUR_NTWS in environment
    CentralEnv
    Exception occurred (locally) on partition "Express_cl7_Client",
    (partitionId = F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3,
    taskId =
    [F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3.226]) in
    application
    "FTLaunch_cl0", pid 65 on node DWILBUR_NTWS in environment
    CentralEnv.
    INFORMATION: Network partner closed connection. This usually means
    the
    process at the other end of the wire failed. Please go look there
    and
    find
    out why.
    Class: qqsp_DistAccessException
    Detected at: qqcm_HoseFSM::ReceivedClose at 2
    Error Time: Tue Dec 02 12:56:00
    Exception occurred (locally) on partition "Express_cl7_Client",
    (partitionId = F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3,
    taskId =
    [F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3.226]) in
    application
    "FTLaunch_cl0", pid 65 on node DWILBUR_NTWS in environment
    CentralEnv.
    INFORMATION: Received close: Connection aborted (10053).
    Class: qqsp_DistAccessException
    Detected at: qqcm_HoseFSM::ReceivedClose at 1
    Error Time: Tue Dec 02 12:56:00
    Exception occurred (locally) on partition "Express_cl7_Client",
    (partitionId = F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3,
    taskId =
    [F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3.226]) in
    application
    "FTLaunch_cl0", pid 65 on node DWILBUR_NTWS in environment
    CentralEnv.
    =======================
    Log messages on server:
    =======================
    Attached to manager for node admin2.
    aud Tue Dec 2 09:34:36 : Loading partition
    testacadprogoffer_cl0_Part2
    built on <unknown>.
    Attached to manager for node admin2.
    aud Tue Dec 2 09:41:58 : Shutting down partition as requested.
    aud Tue Dec 2 09:41:59 : Unloaded partition
    testacadprogoffer_cl0_Part2.
    aud Tue Dec 2 09:49:44 : Loading partition
    testacadprogoffer_cl0_Part2
    built on <unknown>.
    Attached to manager for node admin2.
    aud Tue Dec 2 10:00:11 : Shutting down partition as requested.
    aud Tue Dec 2 10:00:12 : Unloaded partition
    testacadprogoffer_cl0_Part2.
    aud Tue Dec 2 10:18:34 : Loading partition
    testacadprogoffer_cl0_Part3
    built on <unknown>.
    Attached to manager for node admin2.
    aud Tue Dec 2 10:27:00 : Shutting down partition as requested.
    aud Tue Dec 2 10:27:00 : Unloaded partition
    testacadprogoffer_cl0_Part3.
    aud Tue Dec 2 10:47:03 : Loading partition
    EvaluateApplRequirementsBO_CL0_Part1 built on <unknown>.
    Attached to manager for node admin2.
    aud Tue Dec 2 11:09:26 : Shutting down partition due to failure of
    agent
    owner's partition.
    aud Tue Dec 2 11:09:26 : Shutting down partition as requested.
    aud Tue Dec 2 11:09:26 : Unloaded partition
    EvaluateApplRequirementsBO_CL0_Part1.
    aud Tue Dec 2 12:36:14 : Loading partition
    testacadprogoffer_CL0_Part1
    built on <unknown>.
    Attached to manager for node admin2.
    aud Tue Dec 2 12:45:17 : Shutting down partition as requested.
    aud Tue Dec 2 12:45:17 : Unloaded partition
    testacadprogoffer_CL0_Part1.
    FATAL ERROR: Out of Memory (reason = qqOS_MM_EX_OUT_OF_MEMORY)
    FATAL ERROR: Out of Memory (reason = qqOS_MM_EX_OUT_OF_MEMORY)
    Task 11: qqcm_HoseRecvServiceTask::Run: Caught unexpected exception
    FATAL ERROR: ************* Out of Memory, requested (1K) available
    (0K)
    Class: qqsp_ResourceException with ReasonCode: SP_ER_OUTOFMEMORY
    Detected at: qqos_MemoryManager
    Error Time: Tue Dec 2 12:49:01
    Exception occurred (locally) on partition "Forte_Executor",
    (partitionId = F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10f3, t
    askId = [F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10f3.11]) in
    application
    "Forte Runtime", pid 14020 on node admin2 in environ
    ment CentralEnv.
    FATAL ERROR: ************* Out of Memory, requested (1K) available
    (0K)
    Class: qqsp_ResourceException with ReasonCode:
    SP_ER_OUTOFMEMORY
    Detected at: qqos_MemoryManager
    Error Time: Tue Dec 2 12:48:57
    FATAL ERROR: Out of Memory (reason = qqOS_MM_EX_OUT_OF_MEMORY)
    FATAL ERROR: Out of Memory (reason = qqOS_MM_EX_OUT_OF_MEMORY)
    ERROR: TMgr.RunThread: task cm.Recv failed terminating.
    Probably caused by a FATAL exception.
    David Wilbur email: [email protected]
    University of Windsor phone: 519-253-3000 ext. 2779
    Windsor, Ontario Canada

  • Mountain Lion broke vectordesigner 1.7.0. Can I run it in compatibility mode to Lion?

    Hi,
    if anyone could help? Mountain Lion broke vectordesigner 1.7.0. Can I run it in compatibility mode to Lion?
    I can not update to version 1.7.3 because it has been removed from the app store.
    Regards
    Steffan

    There isn't a "compatibility" mode.
    According to Roaring Apps compatibility table, neither version works with Mountaion Lion.
    http://roaringapps.com/apps:table/tags/_v/index_tags/_v

  • I keep getting message "This page requires a plugin that can only run in 32 bit mode" what does this mean and how can I fix it?

    I keep getting message "This page requires a plugin that can only run in 32 bit mode" what does this mean and how can I fix it? It seems to come up randomly, but I'm fairly ignorant.

    Previous versions of Firefox were only 32 bit, Firefox 4 for the Mac contains 32 and 64 bit versions. If you want to always start Firefox in 32 bit mode, open up Finder and go to the Applications folder. Control-click the Firefox app and click "Get Info", then select the "Open in 32-bit mode" option.

  • Error message says "This page requires a plugin that can only run in 32-bit mode"

    When I try to write an email from my BT site I get the following message
    "This page requires a plugin that can only run in 32-bit mode"
    Then there's a link to restart the page in 32-bit mode. However, it resets to whole page, drags things back out the trash.
    I have only had this problem since updating to the latest Firefox

    Previous versions of Firefox were only 32 bit, Firefox 4 for the Mac contains 32 and 64 bit versions. If you want to always start Firefox in 32 bit mode, open up Finder and go to the Applications folder. Control-click the Firefox app and click "Get Info", then select the "Open in 32-bit mode" option.

  • Satellite L300D-11V: can I run SSD in AHCI mode?

    Hi,
    I've just installed an SSD and Win7 64bit on a L300D-11V laptop.
    Does anyone know if it is possible to run this in AHCI mode as I can't see the option in the BIOS?
    I see there is a BIOS update but if this doesn't update to enable AHCI I'd rather not bother...

    Hi
    I presume it should be possible to use the SSD drive with AHCI enabled mode.
    The AHCI means that the HDD or SSD would run with SATA performance but for that you will need to install the SATA driver firstly.
    If SATA mode would be set to compatible mode then a SATA driver is not necessary to install the Windows OS.
    Simply said;
    - you dont need SATA drivers using compatible mode
    - you need SATA drivers using AHCI mode
    The SATA drivers are a part of the Intel Storage Manager and you could download this from Toshiba European driver or Intel page

  • Can Safari run in 32-bit mode on Lion?

    I have a Safari plugin that needs to run in 32-bit mode.  This worked in Snow Leopard with Safari 5.1.  I am unable to find out how you would put Safari into 32-bit mode on Lion.  My suspicion is that this is not possible but I do not know for sure.  Can someone shed some light on this?
    Thank you.

    Answering my own question, yes it can.  The 32-bit mode wasn't showing up before but now it is.

  • Can't run software in Classic mode

    Boy, I've tried to fix this myself and just can't. I have a new out-of-the-box Mac Mini with a generic USB keyboard. I've got some old Mac software (really old) which is really a main reason I bought the mini. I can't get Classic to run because it's not already installed. I have the OS9.2.1 disc, but I can't boot from the CD (I tried pressing C on bootup -- either my Mac can't boot from CD or my keyboard doesn't communicate properly). When I try to run the OS9 installer to get Classic to work, I get the hair-pulling error message that I need to run the installer in Classic
    mode.
    A friend said I need the discs which came with the Mini, but I don't think there are any. Can the software which should have come with it be downloaded and burned on to a new CD in order to create a bootable CD?
    Argh!!! Please help!
    Warren

    Thanks -- I did try that, just forgot to mention it. the CD isn't one of the options in startup disk. It says I can choose the hard drive or the network, and I've tried both. A friend said that Mac Minis can't boot from CD -- don't know if that's correct or not, but I can't seem to get it as an option.
    I've tried to find any CD that may have come with the Mac Mini -- my friend said to look for one called "additional software and apple hardware test CD that came with the Mac Mini" but that is nowhere to be found. Either it didn't actually come with it (my hunch) or the staff in the receiving department took them out for safekeeping and hid them in a drawer somewhere and have forgotten. (Also possible.)
    I can't imagine that I'm the only person in the world with this problem, but my tech support staff warned me in the first place. I wanted to try using some macs mixed in with our PC setup (because they can run this software, and because it seemed easy) and they said that they wouldn't be able to provide much support, since they're all PC people. I figured "how much support can it need? They're designed to be easy to use!" Oh well.
    I'd really be keen to get any more suggestions from anyone who can help!!
    Mac Mini Mac OS X (10.3.9)

  • Can't run report in ASYNCHRONOUS mode

    Hi All,
    I'm trying to make a report run in ASYNCHRONOUS mode. I want to press a button on a form, submit the report to the reports server and be able to navigate within the form while the report is being executed on the reports server.
    My problem is, no matter what mode I choose (ASYNCHRONOUS or SYNCHRONOUS), the mode ALWAYS ends up being SYNCHRONOUS. After I press the button (code below), I get the hourglass and I can't navigate within the form until the report is finished. Then I can view it.
    The reports server I'm using is installed locally on the same PC I'm testing the form.
    Can someone help me please? I'm using using Forms Builder 9.0.2.9.0.
    Thank you,
    Artur
    declare
         v_repid REPORT_OBJECT;
    v_rep in varchar2(100);
    begin
    v_repid := find_report_object('TEST');
    SET_REPORT_OBJECT_PROPERTY(v_repid, REPORT_EXECUTION_MODE, BATCH);
    SET_REPORT_OBJECT_PROPERTY(v_repid, REPORT_COMM_MODE, ASYNCHRONOUS);
    SET_REPORT_OBJECT_PROPERTY(v_repid, REPORT_DESTYPE, 'CACHE');
    SET_REPORT_OBJECT_PROPERTY(v_repid, REPORT_DESFORMAT, 'PDF'); -- OR HTMLCSS
    SET_REPORT_OBJECT_PROPERTY(v_repid, REPORT_SERVER, :TI_REPORTS_SERVER); -- local pc reports server
    v_rep := RUN_REPORT_OBJECT(v_repid, v_param_list);
    end;

    Arthur,
    Communication mode is soemthing forms handles when calling the run report object. Your code looks fine. You might get a quikc answer if you can post this in Forms mailing list
    Thanks
    The Oracle Reports Team

  • Running Firefox 4.0 on Mac OSX 10.6.6, using ATT mail, when I create a new email I get a browser message saying, "This page requires a plugin that can only run in 32-bit mode," and I have to restart Firefox in 32-bit mode. Is there any way around this?

    I am assuming the plugin that the Firefox message is referring to is for attaching a file to the email. I say this because at the bottom of a new email it has a link that says "Attach files more easily" which, when you click it, takes you to a setup process where you download an att updater. I ran that and it did seem to change anything. I am wondering if there is anything I can do to make Firefox handle this page without having to restart in 32-bit mode every time.

    That means that you need to run Firefox in 32 bit mode if you want to use that plugin.
    # Close Firefox
    # Open the Applications folder in Finder
    # Right click or control-click the Firefox.app icon
    # Select "Get Info"
    # Select "Open in 32-bit mode"
    # Close the "Firefox Info" window
    # Restart Firefox

  • Siebdev.exe  - Can I run this in batch mode?

    Just so you are aware, I know nothing about siebel. However, in conjuction with a siebel developer who should know; we are trying to invoke siebdev.exe from a CIB server (jenkins specifically).
    However, running the /batchimport option appears to launch a gui; which I'm fairly sure is causing the app to fail via the jenkins batch job on a windows server (we get an event log application fial)
    Can anyone tell me iif it is posisble to run siebdev.exe silently? or at least so it doesnt fire up the gui?
    Appreciate any help that you can offer.
    Many thanks
    dD

    so, further to this
    I setup a windows schedule job, and that appears to run the job fine.
    However, this runs as my admin account rather than as the service (which doesnt have admin access rights to the machine).....
    Do I need admin rights to run this?
    dD

  • Can I run Firefox in chromeless mode (ie. with no Windows borders etc)

    I think chromeless mode is the correct term to use. Basically I want to run Firefox 8 without the usual Windows borders. For example to run it un-maximised but looking just as it does when maximised.
    If I'm not being clear please ask questions.
    Thanks

    Current Firefox versions on the Windows platform are only available official as 32 bit versions, so that shouldn't be a problem.

  • I keep getting a banner at the top of my email page, ATT/Yahoo, that says "This page requires a plug-in that can only run in 32-bit mode. Then there is a place to click "Restart in 32-bit mode" restarting doesn't help. I have a Mac, OS 10.6.7.

    I don't know what else to add. Please ask me any questions for other info you need.

    That means that you need to run Firefox in 32 bit mode if you want to use that plugin.
    # Close Firefox
    # Open the Applications folder in Finder
    # Right click or control-click the Firefox.app icon
    # Select "Get Info"
    # Select "Open in 32-bit mode"
    # Close the "Firefox Info" window
    # Restart Firefox

  • On some pages I get an error in yellow at the top "This page requires a plugin that can only run in 32-bit mode" with an option to restart; how do I find which plugin this applies to and/or disable this message for the given plugin?

    I don't want to restart in 32-bit mode unless absolutely required, and even if I need to I want to track down and replace the involved plugin with a 64-bit version if I can. There should be a 'more information' or similar button instead of just 'Restart in 32-bit mode' being the only prominent option.

    Look to see if you have an app called Browser Plus from Yahoo. I uninstalled it because it said it isn't compatible with Firefox 4 & up. Thus far that error hasn't returned.

  • Can I run VSS over Single-Mode fiber long range?

    So I have 2 Cat 6509 currently in the same room and I use VSS. I would like to split these 2 switches up geographically on the campus and they would be approximately 2500' apart. I plan to user single-mode fiber with 2 10G LR links on each switch. Any help would be appreciated! 

    As Leo also noted yes that will work fine. It doesn't matter what optic (LR,SR, etc) you use as long as the VSL comes up you are fine 
    what you have to be care full with is that now you have to use single mode for one of  the uplink ports coming from your access switches
    HTH

Maybe you are looking for

  • IBook G4 and Final Cut Express 4.0

    I recently purchased a used 1.33 Ghz iBook G4 to loan to a teen summer camp that I support. They want to produce a video about the camp. I also purchased Final Cut Express 4.0 for them to use. Unfortunately when I loaded the software, only then did I

  • Web services and RMI

    Hi, I have a question about the scalability of RMI with Oracle JVM. What we intend to do is have about 10 SOAP webservices all interacting with our Oracle 8i instance. One of the developers suggestion is to use the Sun Java/SOAP Toolkit to make the W

  • Can I buy 1 update software for 2 Macs?

    I have two Macs, one with Lion and One with Snow Leopard, Can I buy just one software update for the two Macs? or Do I have to buy one for each one?

  • Continuous crash with two different versions of flash player

    Have built my computer piece by piece and have Windows 8 as OS. Everything is compatible but Flash keeps crashing. I have tried to downgrade the version but that didn't work. It crashes with different things so I know it's not just one website or som

  • How to reduce development cost by NetWeaver PI

    Hello, We have decided to use NetWeaver PI for developing between SAP ERP and Legacy, and have not decided which protocol we would use such as BAPI, SOAP and File. I would like to know how to lower the cost of development for interfaces between them.