Can't run command because user is in read-only mode.

Hi
I try to execute any sql statment i am getting this error.
Can't run command because user is in read-only mode.

user493528 wrote:
I am having the same issue with Benthic when I do the With clause.
I understand this is not related to Oracle but did anyone had issue related to this. I am getting the same error. Is it related to ODBC driver of how Benthic use to connect etc.,? I do not know.
Thanks
Gopihttp://www.benthicsoftware.com/support.html

Similar Messages

I have an iMac(mid2010) running Pages v5.5.1 on OS X 10.10. Why can I not save or share documents. The error message is You can't save the file "TEST.pages" because the volume is read only.

I have an iMac(mid2010) running Pages v5.5.1 on OS X 10.10. Why can I not save or share documents. The error message is You can’t save the file “TEST.pages” because the volume is read only.
I get the same message when using Numbers so I presume it is a OS problem

Some of your user files (not system files) have incorrect permissions or are locked. This procedure will unlock those files and reset their ownership, permissions, and access controls to the default. If you've intentionally set special values for those attributes, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it, but you do need to follow the instructions below.
Back up all data before proceeding.
Step 1
If you have more than one user, and the one in question is not an administrator, then go to Step 2.
Enter the following command in the Terminal window in the same way as before (triple-click, copy, and paste):
sudo find ~ $TMPDIR.. -exec chflags -h nouchg,nouappnd,noschg,nosappnd {} + -exec chown -h $UID {} + -exec chmod +rw {} + -exec chmod -h -N {} + -type d -exec chmod -h +x {} + 2>&-
You'll be prompted for your login password, which won't be displayed when you type it. Type carefully and then press return. You may get a one-time warning to be careful. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The command may take several minutes to run, depending on how many files you have. Wait for a new line ending in a dollar sign ($) to appear, then quit Terminal.
Step 2 (optional)
Take this step only if you have trouble with Step 1, if you prefer not to take it, or if it doesn't solve the problem.
Start up in Recovery mode. When the OS X Utilities screen appears, select
Utilities ▹ Terminal
from the menu bar. A Terminal window will open. In that window, type this:
res
Press the tab key. The partial command you typed will automatically be completed to this:
resetpassword
Press return. A Reset Password window will open. You’re not going to reset a password.
Select your startup volume ("Macintosh HD," unless you gave it a different name) if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Under Reset Home Directory Permissions and ACLs, click the Reset button
Select
 ▹ Restart
from the menu bar.

"Device Manager is running in read-only mode because you are running it on a remote computer" when local

Hello - since configuring a Windows Web Server 2008 R2 x64 to be hardened for an internet-facing deployment I receive this:
"Device Manager is running in read-only mode because you are running it on a remote computer."
when entering Device Manager.
I have tried reversing the changes I have made, such as:
- Re-adding Client for Microsoft Networks
- Re-enabling NetBIOS over TCP-IP
- Re-adding File and Printer Sharing
- Disabling the Windows Firewall in all profiles (public, domain, private)
I get no joy. It looks like a Microsoft ballsup. I'll try and use Process Monitor to have a look. Google returns only 1 page for this error.
Luke

Got it.
After my changes to DHCP and static IPs the machine picked up the IP address of another server on my little home LAN. The hostname in IPCONFIG was different to the actual server computer name and so this led Device Manager to think the connection and the
local machine were different.
What an odd and infuriating problem. My thoughts on this are that Microsoft should be more verbose with error messages and their causes. For example, displaying the values of the assertion would help diagnose a problem; "The host-name www02.farm.brand.com
that you are connecting from does not match the local host-name rest01.dev.farm.brand.com. Connections from remote computers can only use Device Manager in read-only mode; some options will be disabled."
When troubleshooting, the main thing on an engineer's mind is "what has led Windows to its [unexpected] conclusion?"
Luke

Read-only mode. Object is currently locked by user: J2EE_ADMIN. hw 2 unlock

Hi friends,
<b>i am not able to edit my object in EP</b> , it says
Read-only mode. Object is currently locked by user: J2EE_ADMIN.
how do i unlock it ?
i am on 04s SP9

Hi Rohit,
Navigate to
system_admin -> Monitoring->
Portal->object_locking->
There you can view your locked pcd object.Just check it and Unlock.
That should solve your problem.
Hope this helps
Regards
Vineeth

OBIEE11g: Set user privileges to Open RPD in Read Only mode.

Hi All,
Can some one help me , how to set user privileges to open RPD in read only mode.
1) If a user ( xxxx) logs into the RPD then the rpd should open in Read Only Mode for xxxx user.
2) If other user (YYYY) logs in online mode then it should open in online mode for other user (YYYY).
How to set the security to achieve this.

863866 wrote:
Hi All,
Can some one help me , how to set user privileges to open RPD in read only mode.
1) If a user ( xxxx) logs into the RPD then the rpd should open in Read Only Mode for xxxx user.
2) If other user (YYYY) logs in online mode then it should open in online mode for other user (YYYY).
How to set the security to achieve this.Hi,
I don't think it's possible, can go with metadata dictionary option which is also help to analysis RPD.
refer section,
http://docs.oracle.com/cd/E23943_01/bi.1111/e10540/utilitiesexprbldr.htm#BIEMG325
Thanks
Deva

The project cannot be checked out because the server is in read-only mode.

Receiving the message "The project cannot be checked out because the server is in read-only mode." when a project manager is trying to access a project. He is a backup PM, and I'm wondering if that's why he is getting the message (since he is
not the Owner or Status Manager of the project he is trying to access). We are using SharePoint permissions in Project Server 2013.

Hi,
I have a solution that might work for you, please follow steps below:
1) Go to your project schedule, make a small modification to any task on schedule and 'Publish' the project.
2) While your project is being published and saved, open another window
Server Settings -> Manage Queue Jobs
3) Here you can view the progress of your current Project Publishing update, check if all goes smooth and your project is published successfully without indicating any errors :
( to view any error look at the last column of
table on Manage Queue Job page)
4) Also in your Project window see if the project is published and not saved as Draft.
Basically this will give you a fair idea of your project being published or not.
Regards

How can I put Planning into Read Only Mode ?

We need to backup our Essbase cubes to tape every night. How can I update Oracle HSP* tables so that I put Planning into Read Only Mode ? I want to prevent Asia and Europe users from updating Planning while Essbase is in READ-ONLY mode (BEGINARCHIVE).

Hi,
You should put the planning application in Maintenance mode if you are doing any backups, this can be done from planning web.
Select Administration > Application Settings.
For Show, select Advanced Settings.
Click Go.
Select System Settings.
For Application Maintenance Mode, select an option for Enable Use of the Application For:
All users —All users can log on to the application or continue working with the application if they are currently logged on.
Administrators —Only other administrators can log on. Other users are forced off and prevented from logging on until the option is reset to All Users.
Owner —Only the application owner can log on. All other users are prevented from logging on. If they are currently logged on, they are forced off the system until the option is reset to All Users or Administrators. Only the application owner can restrict other administrators from using the application.
Hope this helps
John
http://john-goodwin.blogspot.com/

Excel 2013 Cannot Save because the file is read-only.

To answer both. He can edit and save to these locations. Then randomly it comes up and says it is in read-only mode. He saves the document as something else. Deletes the original document and then renames the newly saved document back to the original name. Auto-save is on and working and he is using versioning but I believe those are on for everybody. Like I said I did a excel doc as him and didnt have any issues. So I am not sure what it takes to reproduce it. I actually made sure he wasnt also connected to wireless and he is not he is only hard wired.

User keeps getting this same error on random excel files that he has opened for editing. They do not say read-only mode. They trust settings are correct. I created a spreadsheet modified it saved it and opened it every way I could think of and cannot reproduce the problem but can show me on the spreadsheets. It happens on his and others spreadsheets. Doesnt seem to be a rhyme or reason for it.
Windows 7, 64 bit.
This topic first appeared in the Spiceworks Community

ZForm only opens is 'read only" mode - but WDR_TEST_ADOBE, runs fine

Dear readers,
I am working on an Adobe form, now ZForm only opens is 'read only" mode - but when i run WDR_TEST_ADOBE, it runs fine and it is interactive and I am able to click on the buttons.
I compared the form from WDR_TEST_ADOBE, and changed the layout to ZC1, and run the Web dynpro script. After activating and running the webdynpro, I see that it is still acting strange and none of the input fields are accepting input.
There seems to be nothing wrong with the ADS or live cycle designer.
Some setting in my Webdynpro is preventing this form from being displayed correctly.
When I attach the form - "WDR_TEST_ADOBE_SIMPLE" from the WD - WDR_TEST_ADOBE, and test my WD, The form is being displayed as read only.
which again leaves to the conclusion that the something is not right in the WD.
~Any suggestions are appreciated, thanks

Also in the interface properties under sfp,
when I change the interface type from
"ABAP dictionary based interface" to
"XML schema based interface".
All the entries under Form interface->Import parameters get wiped out, and I have to enter them again.
Also below is the system information.
Software   ComponRelease   Level Highest SupportShort Description of Software Co
SAP_ABAP           700        0017     SAPKA70017     Cross-Application Component
SAP_BASIS          700      0017     SAPKB70017     SAP Basis Component
SAP_HR            600        0040     SAPKE60040     Human Resources
and I am doing development on HR box, could this be causing trouble, bcos as per below link
http://help.sap.com/saphelp_nw70/helpdata/en/77/3545415ea6f523e10000000a155106/frameset.htm from here goto: WebDynpro ABAP Development in Detail->Integration->Integrating Forms->Forms with ABAP Dictionary Based Interface.
As of NetWeaver 7.0 SPS10 we strongly recommend you use ZCI forms with an XML interface only. Because additional central features have been added in subsequent SPs (input help and dropdown list boxes), we generally recommend that you always use the most up-to-date Support Package for Web Dynpro ABAP.
Edited by: Neha Sharma on Feb 1, 2010 11:21 AM
Edited by: Neha Sharma on Feb 1, 2010 11:25 AM
Edited by: Neha Sharma on Feb 1, 2010 11:27 AM

Problem:Member is Read only Mode after login with other user

Dear,
I am facing problem to enter the data in member. i.e Read only. but same member is fine with login with admin user.
I also assign the security with write permission to user. but the only that member "X" is in read only mode..
Is task list can effect on that??? as i am also using task list. Becoz when i add another member that is not member of that hirechiary its fine.
I am working on hyperion version 11.1.2.1..
Regards,
AMSI

Thanks, Problem has been solved myself becoz when i add new member in the form as this form is already part of Planning Unit Hierarchy , that's why the newly added member in the form can't be write only till up to when u add this member into Planning Unit Hierarchy.
Regards,
AMSI

Can't update while select is active in read-committed mode

Hi
This is my business logic:
I m selecting the values from three tables by UNION ALL and i m geting the record set in while loop at the same time i try to insert the values which is getting from select statement in the First Table in the same while loop.
my problem is when i try to insert into the same table the following error is occured
"can't update while select is active in read-committed mode"
Now what can i do ? please give me ur solution ...
Thankx
Merlina

depending on how many values you have, you could store the results in memory, a vector or similar collection.
Then close the select statement, and insert the values from your vector into the table.... should work then.
Or, there may be a way of creating an updatable resultset ?
This question is better directed at the
"Java Database Connectivity (JDBC) & Transactions (JTA/JTS)" section of the forum. Maybe post a questions there, ensuring you give the URL of this question here too to avoid cross-posting.
regards,
Owen

How can we make the ms-word data as read-only using java code?

How can we make the ms-word data as read-only using java code?

MVSK wrote:
By using java code i opened a file in ms-word. But the data i want to display as read-only. that means should not change it.I don't think you can do that. Display pdf documents instead.

Hi just bought an external hard drive and can't change the sharing and permissions from read only status. How do i change it?

Hi new to macs and dont know how to change the sharig and permissions to my external hard driive from read only mode. please help

Get Info on your drive from the Finder - you'll see a dialog box like this:
If the Privilege is set to Read Only for the user, simply click on the "Read Only" and change it to "Read & Write".
Is that what you're looking for?
Clinton

Can ACS run commands at logon for specific users?

I have a scenario where I'd like a command run at the time a user logs into the device. Can ACS do this on behalf of the user during the logon process?

Sure. Bigip LTM, once authenticated, drops users into what is called a TMSH shell. This breaks rancid since rancid expects to be in a bash shell.
You can access bash from TMSH via a command(run util bash). I'd like ACS to pass this command and run it the moment the rancid user logs in. That way subsoquent commands from rancid will work since he will at that point be at a bash prompt.
Basically a logon script that runs commands for the user at the time the user logs in.

[solved] hook to run commands when user logs in? (before bash profile)

Is there any way to run commands when a user logs in but before the bash profile is sourced?
For example, I have a user account with a home directory on /tmp. When the user logs in, the home directory might not exist so there will be no .bash_profile to source. I want to run a script to create the directory if necessary and copy some files into it. How can that be done?
I thought of putting something in /etc/profile or /etc/profile.d/, but I would like to run something before the user's shell and environment become active.
I can use /etc/rc.local to do what I want, but I would prefer a hook to ensure that everything is set right when the user logs in.
Any ideas?
*edit*
Solution
In my case, I found that I could write my own shell script and set it as a login shell. In the script, I can configure everything I need before launching the interactive shell, then clean up anything after it exits.
Last edited by Xyne (2011-12-10 19:34:07)

Thanks, dammannj. PAM could probably do what I need but I think I have found a simpler solution (see original post).

Can't run command because user is in read-only mode.

Similar Messages

Maybe you are looking for