Can't run Connector, Changes the server name

I am trying to run the Windows 2011 Server Connector on a new PC running 8.1. Never worked with 8.1 before. Connecting on earlier OSs was easy. I am following the same procedure, but the system keeps placing " :65510 " behind the server name. Of
course the ":" is a non-standard character, and it gives me the error message.
Why does it add these characters, and how can I stop it in order to install the 2011 home server "connector?"

Hello Metalplane,
As this issue is related to Windows home server, to receive better support, it is recommended to post in the Windows Home server Forum.
The professionals there will be glad to help you.
https://social.microsoft.com/Forums/en-US/home?category=WindowsHomeServer
Thanks for your understanding.
Best regards,
Fangzhou CHEN
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Similar Messages

"Is it possible to hide/remove/change the server name/type and

Is it possible to change the server name/type and version number being sent in the http response header by iPlanet Web server so a hacker can't see what server and version I'm running? If yes, what is the procedure to do it?

Hi,
I have tried the ServerString none entry in magnus.conf but still it is showing the Server information in the header if you use telnet . Is there any other way to hide or to mask this information.
Thanks,
Ramki

Changing the server name on package connection string.

I have a connection string in a package which is a local connection string and not in project connection manager and isn't parameterize as well. Now I need to change a server name of the connection property without using editor. Can I do that and how ?
Moyz Khan

I agree about using configuration for connection string but unfortunately this is an inherited project/packages . And my task it to make these run as currently I don't have luxury to modified it.
So I was able to change most of the connection string with below update
update[SSISDB].[internal].[execution_parameter_values]
setparameter_value=replace(cast(parameter_valueasvarchar),'OldServer',NEwServer)
update[SSISDB].[internal].[object_parameters]
set[design_default_value]=
replace(
cast([design_default_value]asvarchar(1000)),'OldServer','NEwServer')
Now the only one its complaining is the Project connection string . If I know where to look and update that I might be able to run these packages .
Moyz Khan

OEM is not getting started after changing the Server name

Hello DBAs
Recently I installed Oracle database 10g on my a windows machine. It was working fine. Integrated OEM was also working fine.
But now I have changed the machine name. Now Oracle Database has come up after updating the listener.ora & tnsnames.ora files with new server name. But OEM page is not getting open now. I tried after updating the emd.properties and other related file on ORACLE_HOME\sysman folder with the new server name. But no luck.
In windows services one service named *"OracleDBConsoleDbname"* is not getting started, which could be the issue.
Can someone please guide me what can be done to fix this problem.
Thanks
-Naveen

Hi Naveen,
What you are doing is not supported by Oracle. From EM Database Console FAQ (863631.1):
What action needs to be taken if the hostname or SID of the database server is changed?
If there is a hostname or SID change for the database server then the database console needs to be recreated. There is no other solution if the hostname or SID is changed other that recreating the database console. All database console configuration files are created under the hostname_sid directory and the configuration files along with the repository keeps reference of the hostname, which is why dbconsole needs to be reconfigured if there is change in hostname/sid.
Refer : Note.293678.1 How To Reconfigure DB Control After a Hostname, Domain name or Listener Change Has Occurred On The Server
And take a look at note 278100.1: How To Drop, Create And Recreate DB Control In A 10g Database
Eric

Changing the server name

Hi,
We have our sandbox system in the solution manager and configurations done. Recently we have changed the hostname of the sandbox system viz., xy00yz01 to ab00bc0...now coming to the question...can I change the sandbox hostname in the solution manager so that the pre-existing configuration settings work? Does this work or Is there any alternative?
Thanks and Regards,
Damanaidu J

Hi,
My question was not to change the name of a host server as such...say i have a server with name xy00yz01 and i have changed it to ab00bc01...i have done configuration settings for my satelite system with name xy00yz01in solution manager...now those settings can't be detected by the solution manager as the host name of my satelite system is now ab00bc01...so my question is whether I can change the host name of the satellite system to ab00bc01 from the solution manager setup so that I can all the configuration settings detected.
Thanks and Regards,
Damanaidu J

How do I properly change the server name in mountain lion server?

I need to change my server name to a FQDN, but tried this with Lion server in the past without success. I know in lion you'd use server app, but that's no longer avaiable in mountain lion server and I want to make sure I get this right the first time.
Thanks!

I was able to get everything working with some assistance from Apple's enterprise support. After changing the host name, the DNS was still not resolving properly and I couldn't turn on open directory so that I'd be able to start profile manager. The DNS interface is considerably different than that in previous versions of server. The network was set to manual ip with dhcp, which was pulling back an external IP. Overriding the DNS info coming in via the dhcp, setting it to localhost, resolved the issue.
Thanks!

Changing the server name and IP of an instance

I am moving QAS to another partition. I did a full system backup and restore to the new partition name and IP. QAS will not start on the new partion. What is the simplest way of migrating this instance into the new partion with a different name and IP? Do I need to reinstall or can I change the profiles so that it will start up.

That worked and the create system ran... but, I get this error as I deleted the profiles and the trans config
                                                                                Program XDNCONTROL in library *LIBL not found.
Error found on CALL command.
Environment variable added.
Job 001402/QASOFR/STRRMTDB submitted to job queue QBATCH in library QGPL.
Environment variable removed.
Ownership of object GETOBJINF in QTEMP type *USRSPC changed.
O4STRSAP: Could not retrieve instance/system configuration for instance 02
   of system QAS on host PPAK0055 from directory
   "/usr/sap/trans/config/QAS".
Ownership of object SAPIPCFG in QTEMP type *USRSPC changed.
Ownership of object SAPIPCFG in QTEMP type *USRSPC changed.
O4STRSAP: Starting instance 02 of system QAS on host PPAK0055 is not
   possible. System configuration can not be retrieved.
Errors occurred in command.
Bottom

How to change ASE server name in windows

how to change the server name in Adaptive server enterprise running on windows

Windows is going to require a few more steps if ASE is running as a service.
Update all registry entries containing <servername> with <newservername>:
HKLM\SOFTWARE\SYBASE\Server
HKLM\SYSTEM\CurrentControlSet\Services\SYBSQL_<servername>[ _BS | _XP ]
NOTE: Doing a registry search on <servername> will bring up a ton of other locations, eg, legacy entries, ControlSet00X, etc ... not sure if all of these have to be changed, too ...
NOTE: Haven't installed any of the latest ASE packages in windows so don't know if SAP's gone an changed the HKLM\SOFTWARE sub-branch name from SYBASE to SAP
=========================
In addition to Ryan's notes:
- any other sysservers entries that refer to the old servername (eg, loopback)
- any remote servers would need to update their external/remote logins, remote servers and/or proxy definitions ... as appropriate
- if the ASE is involved in replication then you're looking at whole 'nother can of worms ... off the top of my head ... rs_databases, rs_idnames, rs_repdbs ... and of course any repdefs/subs that include the ASE name ?
- obviously (?) any monitoring/maintenance/operational jobs ... documentation ...

Lightroom 6 is up and running. Upgraded from LR5. However I want to change the file name to be more generic, e.g., description in LR5 references LR5 and I want to change that to just John G's LR Catalog/Library.lrcat. How can I accomplish this without

Lightroom 6 is up and running. Upgraded from LR5. However I want to change the file name to be more generic, e.g., description in LR5 references LR5 and I want to change that to just John G's LR Catalog/Library.lrcat. How can I accomplish this without fouling everything up?

Ok, well you'll need to do something like this. Now this part is a little dependent on your database server:
       try {
            Class.forName("org.gjt.mm.mysql.Driver").newInstance();
            Connection c = DriverManager.getConnection(
                                                       "jdbc:mysql://{database-server}/{database-name}:3306?user={username}&password={password}");
            Statement Stmt = c.createStatement();
            int count = Stmt.executeUpdate(cmd);
            if(count>0) {
                 System.out.println("count: " + count);
        } catch (Exception e) {
            e.printStackTrace();
    }That was some sample code for a MySQL database.
Note that the applet can only contact the server that is was loaded from, so you might want to do a getCodeBase() or something like that to get the server address.
Hope this is helpful.

I changed the Computer Name and i can not run EM.

I had to change the computer name in order to connect to the intranet.
I updated the listener.ora and tnsnames.ora with the new computer name.
I can run SqlPlus but i can not run EM on http://tahirpc.isu.intranet:1158/em *
I checked Services and I saw that OracleDBConsoleorcl service do not work. I get error code:2 when i try to run it manually.
What should i do?
New computer name: tahirpc.isu.intranet
Old computer name: mtkeskin.isu.intranet
OS: Win 7
Oracle: 10.2.3
------------------------

Thank you Jean-Valentin . I tried those but unfortunately this did not work.
Here is what i did on CMD:
RECREATE
C:\Users\mtkeskin>EMCA -CONFIG DBCONTROL DB -REPOS RECREATE
STARTED EMCA at 28.Oca.2010 11:28:43
EM Configuration Assistant, Version 10.2.0.1.0 Production
Copyright (c) 2003, 2005, Oracle. All rights reserved.
Enter the following information:
Database SID: ORCL
Listener port number: 1521
Password for SYS user:
Password for DBSNMP user: l
Password for SYSMAN user:
Password for SYSMAN user: Email address for notifications (optional):
Outgoing Mail (SMTP) server for notifications (optional):
You have specified the following settings
Database ORACLE_HOME ................ D:\oracle\product\10.2.0\db_1
Database hostname ................ tahirpc.isu.intranet
Listener port number ................ 1521
Database SID ................ ORCL
Email address for notifications ...............
Outgoing Mail (SMTP) server for notifications ...............
Do you wish to continue? [yes(Y)/no(N)]: Y
28.Oca.2010 11:29:07 oracle.sysman.emcp.EMConfig perform
INFO: This operation is being logged at D:\oracle\product\10.2.0\db_1\cfgtoollog
s\emca\orcl\emca_2010-01-28_11-28-42-AM.log.
28.Oca.2010 11:29:24 oracle.sysman.emcp.EMReposConfig dropRepository
INFO: Dropping the EM repository (this may take a while) ...
28.Oca.2010 11:32:09 oracle.sysman.emcp.EMReposConfig invoke
INFO: Repository successfully dropped
28.Oca.2010 11:32:10 oracle.sysman.emcp.EMReposConfig createRepository
INFO: Creating the EM repository (this may take a while) ...
28.Oca.2010 11:37:14 oracle.sysman.emcp.EMReposConfig invoke
INFO: Repository successfully created
28.Oca.2010 11:37:34 oracle.sysman.emcp.util.PlatformInterface executeCommand
WARNING: Error executing CMD /C D:\oracle\product\10.2.0\db_1\bin\emctl.bat depl
oy dbconsole D:\oracle\product\10.2.0\db_1\tahirpc.isu.intranet_ORCL tahirpc.isu
.intranet:3938 tahirpc.isu.intranet ORCL
28.Oca.2010 11:37:34 oracle.sysman.emcp.EMConfig perform
SEVERE: Error instantiating EM configuration files
Refer to the log file at D:\oracle\product\10.2.0\db_1\cfgtoollogs\emca\orcl\emc
a_2010-01-28_11-28-42-AM.log for more details.
Could not complete the configuration. Refer to the log file at D:\oracle\product
\10.2.0\db_1\cfgtoollogs\emca\orcl\emca_2010-01-28_11-28-42-AM.log for more deta
ils.
DROP
C:\Users\mtkeskin>EMCA -DECONFIG DBCONTROL DB -REPOS DROP
STARTED EMCA at 28.Oca.2010 11:47:57
EM Configuration Assistant, Version 10.2.0.1.0 Production
Copyright (c) 2003, 2005, Oracle. All rights reserved.
Enter the following information:
Database SID: ORCL
Listener port number: 1521
Password for SYS user:
Password for SYSMAN user:
Password for SYSMAN user:
Do you wish to continue? [yes(Y)/no(N)]: Y
28.Oca.2010 11:48:13 oracle.sysman.emcp.EMConfig perform
INFO: This operation is being logged at D:\oracle\product\10.2.0\db_1\cfgtoollog
s\emca\orcl\emca_2010-01-28_11-47-56-AM.log.
28.Oca.2010 11:48:17 oracle.sysman.emcp.util.DBControlUtil stopOMS
INFO: Stopping Database Control (this may take a while) ...
28.Oca.2010 11:48:18 oracle.sysman.emcp.EMReposConfig dropRepository
INFO: Dropping the EM repository (this may take a while) ...
28.Oca.2010 11:50:35 oracle.sysman.emcp.EMReposConfig invoke
INFO: Repository successfully dropped
Enterprise Manager configuration completed successfully
FINISHED EMCA at 28.Oca.2010 11:50:35
CREATE
C:\Users\mtkeskin>EMCA -CONFIG DBCONTROL DB -REPOS CREATE
STARTED EMCA at 28.Oca.2010 11:54:55
EM Configuration Assistant, Version 10.2.0.1.0 Production
Copyright (c) 2003, 2005, Oracle. All rights reserved.
Enter the following information:
Database SID: ORCL
Listener port number: 1521
Password for SYS user:
Password for DBSNMP user:
Password for SYSMAN user:
Email address for notifications (optional):
Outgoing Mail (SMTP) server for notifications (optional):
You have specified the following settings
Database ORACLE_HOME ................ D:\oracle\product\10.2.0\db_1
Database hostname ................ tahirpc.isu.intranet
Listener port number ................ 1521
Database SID ................ ORCL
Email address for notifications ...............
Outgoing Mail (SMTP) server for notifications ...............
Do you wish to continue? [yes(Y)/no(N)]: Y
28.Oca.2010 11:55:19 oracle.sysman.emcp.EMConfig perform
INFO: This operation is being logged at D:\oracle\product\10.2.0\db_1\cfgtoollog
s\emca\orcl\emca_2010-01-28_11-54-55-AM.log.
28.Oca.2010 11:55:32 oracle.sysman.emcp.EMReposConfig createRepository
INFO: Creating the EM repository (this may take a while) ...
28.Oca.2010 12:00:13 oracle.sysman.emcp.EMReposConfig invoke
INFO: Repository successfully created
28.Oca.2010 12:00:27 oracle.sysman.emcp.util.PlatformInterface executeCommand
WARNING: Error executing CMD /C D:\oracle\product\10.2.0\db_1\bin\emctl.bat depl
oy dbconsole D:\oracle\product\10.2.0\db_1\tahirpc.isu.intranet_ORCL tahirpc.isu
.intranet:3938 tahirpc.isu.intranet ORCL
28.Oca.2010 12:00:27 oracle.sysman.emcp.EMConfig perform
SEVERE: Error instantiating EM configuration files
Refer to the log file at D:\oracle\product\10.2.0\db_1\cfgtoollogs\emca\orcl\emc
a_2010-01-28_11-54-55-AM.log for more details.
Could not complete the configuration. Refer to the log file at D:\oracle\product
\10.2.0\db_1\cfgtoollogs\emca\orcl\emca_2010-01-28_11-54-55-AM.log for more deta
ils.
I checked log files but i did not understand anything of 'em :(
Edited by: NaKKaSh.TR on 28.Oca.2010 12:12
Edited by: NaKKaSh.TR on 28.Oca.2010 12:14

Can I change the COMPUTER NAME of Windows Server ?

Hi all,
Is it possible to change the Computer Name of the Windows Server 2008, if Yes, what's the effect on all terminal profile on each station?
** We have many station that accessing some files thru pipe name ex: \\MyServer\Data\ hard coded on program public folders on server, but the newly installed server was named "MyServer2" can just rename it back to "MyServer" without problems
on client station? " ***
Thanks ^_^y

Yes. You can change the name.
You need to update all reference to new server name. You can try creating an Alias in DNS as a co-existence option.
Santhosh Sivarajan | Houston, TX
Windows 2012 Book - Migrating from 2008 to Windows Server 2012
http://www.sivarajan.com/
This post is provided ASIS with no warran

Must I reinstal Oracle if I change the server's host name

My oracle817 is running on the windows2000 platform and works well.
But when I changed the W2K server's host name, the OracleOraHome81Agent service can't be started. What's wrong with it? Must I reinstall the oracle to comply with the host name?
Thanks in advance
John

Eric Walton wrote:
I do NOT want to change the adminstrator short name or the administrator password. But I'm wondering whether I can change the administrator long name (account name?) by editing the "Name:" field in the administrator's account pane under the Password tab. And if I can change the name is this is a good idea or will I open a pandora's box of problems.
I changed the long name & did not observe any problems.
Permission problems? - will there be ownership problems if the account owner's long name is changed but the short name is not,
Mac OS X uses the short name internally.
Login problems? - I assume the login window will show the usual picture icon for the administrator but with the new long name. And by clicking the icon I'll have no problem logging in as long as I supply the old unchanged password.
correct
File sharing problems? - If I want to login (Connect) to the administrator's account from another machine then could I use either the new administrator long name or the old unchanged short name to do this?
Have not tried this. You can use the short name.

New install Express on Win 8 can see the Server name but cannot see the instance

I am doing this over the phone with a client who is not sure what he is doing we have installed Ok the folders exist and we have enabled TCP/IP
The instance is MSSQLServer when we try to connect all we get is 'ComputerName' I am expecting 'ComputerName \MSSQLServer'
The user does not have administrator rights and he installed SQL Server without the administrator (I think, I am not sure he knows)
I am looking for clues as to what may cause the instance name to not appear
thanks in advance
jnc

Thanks, that is useful but the list of instances just matches the details in SQL Configuration manager
What I need is to understand why, if the server is listed and is running it is not visible when we try to connect
jnc
Hi jnc,
Could you please verify that if the instance name is not listed in “Server name” drop-down list of SQL Server Management Studio (SSMS)? If so, does the instance list in the Local Servers tab in the “Browse for Servers” dialog?
If you cannot see the express instance in the Local Servers tab in the “Browse for Servers” dialog, the reason may due to SQL Server cannot get the appropriate registry entry information in the System Registry (HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Microsoft
SQL Server\Instance Names).
To work around this issue, you can manually input the instance name which will be show in the Local Servers tab. Also make sure that right click on SSMS and then choose “Run As Administrator” to start it.
However, if the express instance is listed in the Local Servers tab in the “Browse for Servers” dialog, but not in the “Server name” drop-down list. Then if you have never connected with the instance name before, its entry will not listed in the drop-downlist.
Or if you have connected to server with a wrong instance name, you cannot see its entry the next time.
Thanks,
Lydia Zhang
If you have any feedback on our support, please click
here.
Lydia Zhang
TechNet Community Support

How to change the SID name in the server

hi all,
i installed oracle 10g R1 on windows 2003 server. i gave an sid and created a database. the database is new and there is no data in the db. now i want to change the SID name of the database. pls help me in doing this.
regards,
nagarjuna

Hi,
Just a notice: SID and DBNAME are two different things. But the usual practice is to have SID = DBNAME, so let me assume you want to change both SID and DBNAME.
Either you can do it manually by recreating the controlfile as orawiss suggests. You may discover some challenges around the way (for instance, for the command CREATE CONTROLFILE SET "new_dbname" to work, you have do delete or rename the old controlfiles first).
Or, you can change it easier by using nid utility. The detailed howto and all implications can be found on:
http://download.oracle.com/docs/cd/B14117_01/server.101/b10825/dbnewid.htm
Basically:
SQL> create pfile from spfile;
SQL> shutdown immediate;
nid TARGET=sys/password@oldname DBNAME=newname
copy the initoldname.ora to initnewname.ora and edit the DB_NAME parameter to reflect the new name
sqlplus / as sysdba
SQL> create spfile from pfile;
SQL>startup mount;
SQL> alter database open resetlogs;
Then don't forget to generate new password file for the new dbname (using orapw) and make changes in tnsnames.ora and listener.ora if needed.
Just make sure, the database has been properly shut down before changing the db_name either manualy by recreating controlfile or by the newid utility, as the renamed database has to be opened with resetlogs - making any crash recover of improperly shut down database impossible.
Kind regards,
Martin

How to change the printer name in the User profile in the run time.

Hi
I am in need to change the printer name in the run time.
Do any one hav idea about this?
Thanks
Karthik

The user default settings can be changed using funtion module SUSR_USER_DEFAULTS_PUT.
Import parameter USER_DEFAULTS-SPLD will hold the default printer name.

Can't run Connector, Changes the server name

Similar Messages

Maybe you are looking for