Can't run FCP v.3 on my ibook
Does anyone know why I can't run my FCP version 3 software on my computer. I get an error message asking me to re-install the programme as it can't find a file. I re-install and get the same message. I was previously running this version on my old titanium 667GHz laptop with great sucesss.
I would be grateful for any advice.
Many thanks
ibook G4 1.42GHz Mac OS X (10.4.6)
Could be that Tiger and FCP 3 don't get along (never tried it actually), but make sure the install is done right before you change the OS or create a new startup disk for FCP 3. Uninstall FCP 3 first: http://docs.info.apple.com/article.html?artnum=93742
If the reinstall after uninstalling fails... I'll bet you need to setup a startup disk running OS 9.2.2 or Jaguar 10.2.8... to run FCP 3 on your iBook. I have an article about this in the current issue of Creative Cow's magazine. Click here for a free download of it: http://forums.creativecow.net/cgi-bin/newpage_wrapper.cgi?forumid=1&page=http://www.creativecow.net/magazine/cowmagsubscribe.html
Jerry
Similar Messages
-
Hi there,
Can I run fcp x with this graphics card?
Chipset Model: GeForce 8600M GT
Type: Display
Bus: PCIe
PCIe Lane Width: x16
VRAM (Total): 256 MB
Vendor: NVIDIA (0x10de)
Device ID: 0x0407
Revision ID: 0x00a1
ROM Revision: 3175
Displays:
Color LCD:
Resolution: 1440 x 900
Depth: 32-Bit Color
Core Image: Hardware Accelerated
Main Display: Yes
Mirror: Off
Online: Yes
Quartz Extreme: Supported
Built-In: Yes
Display Connector:
Status: No Display Connected
Thanks,
rwaApparently not
http://support.apple.com/kb/ht4664 -
If i buy a mac mini 2.8 can i use fcp x ?
Hello
DUE TO BUDGET CONSTRAINTS
If i buy a mac mini
2.8GHz dual-core Intel Core i5
8GB memory
1TB Fusion Drive1
Intel Iris Graphics
OS X Yosemite
can i run fcp x efficiently? or would fcp 7 work better?
if i can .... i have (4) 1 tb hard drives that i would run on a raid if possible for external storage
thanks
sarareikaEXternal hard drive(s) is a must for a smooth UX.
nice2have would be 16GBRam, but for 'average' use 8 does it.
see my specs: aside Ram, my Mac has less 'power' and works perfect.
for my needs. -
How to run FCP on an iBook without Quartz Extreme?
Hi, I would like to be able to run FCP 5 on my existing iBook G4 (1.2GHz with 512MB RAM). Soundtrack Pro and DVD Studio should run fine but I believe FCP will not launch without a Quartz Extreme graphics adapter (and I don't have the cash to upgrade to a MacBook Pro!) I have heard there is a hack available to allow FCP 5 to run on lower-spec graphics chips... anyone know where I could find this hack? Are there any associated issues?
Cheers,
TomOf the two, target mode would be far more efficient (and less risky -- in terms of software data corruption). I have in the past installed OS X on a machine with a poor DVD drive, so iLife should be no problem.
-
Anybody here has a "2007-2008 model" - iMac C2D with an ATI Radeon HD 2600, who can RUN FCP X?
Thanks!
--STRALLENThttp://discussions.info.apple.com/thread.jspa?messageID=12248238�
http://discussions.apple.com/thread.jspa?threadID=2649035&tstart=0 -
Can I install/run FCP 7 and/or adobe CS4/5/6 on apple mac mini MD388HN-A as it has INtel HD 4000 Graphics?
If you want to run Adobe apps, make sure you have the maximum RAM and plenty of available hard disk space. Given the typical internal drive sizes of the Mini, this would mean investing in one or two large external drives. Photoshop and InDesign only work well if there is a very large chunk of space available as a scratch disk. Some recommend dedicating a drive just for scratch space, if you are working with large, complex Photoshop files or large InDesign projects.
-
Can I run an external display off the new LaCie 2Big Thunderbolt.
I currently run FCP 7 on a brand new MacBook Pro. I use the Thunderbolt port into a Thunderbolt to VGA adapter (third party) to run an external Asis 27" display. It all works quite well. But...
Right now I use a LaCie d2 Firewire 800 external HD as my scratch but would like to upgrade to the new LaCie 2Big Thunderbolt. I want to then run my external display (still using the adapter) off the second Thunderbolt port on the 2Big. Is this possible? My local Apple authorized store was very sceptical although they had never tested it, in fact, they haven't even sold a 2Big yet.
Has anyone done this? Am I going in the right direction. I don't want to pop for the 2Big (+$500) and find out the setup can't be done.
ThanksYes, I've demo'd this a lot. Thunderbolt out of a computer, to the drive, looped to a monitor. AND!! Thunderbolt to an AJA IoXT for broadcast monitoring, back out to the drive, then the drive to a computer display.
Boggles the mind, but it works -
I have an Intel iMac running OSX 10.6.8. I would like to use Final Cut Pro 10.1. I know I need OSX 10.9 for this. Can I run both 10.6.8 and 10.9 on the iMac ? I do not want to convert completely to 10.9 because of my existing software. Thanks for any help
It would depend on how old your IMac is, how mush memory you have, it it can be upgraded by OWC, etc. I have a 2006 Macbook Pro and would NOT put Mavericks on it or espeacially FCP 10.1.1 on it because the most memory it can have is 4 GB. You need at least 8 GB to work with Final Cut Pro 10.1.1. IMHO.
I would try to find a copy of Final Cut Express perhaps.
Does this answer your question? -
New Mac Pro with Lion and can't install FCP.
I got a new Mac Pro with Lion and can't install FCP that worked fine in SL. Is it not compatible? Is it really a PowerPC program??? I'm a videographer and rely on this software and to spend $300 to continue to use it after spending a lot more for this software 4 years ago! Tell me this is not the case and there is a solution to installing FCP.
How to run FCP 6 (FCS 2) under Lion.
The installer for FCP 6 (FCS 2) is a PPC app. The Programs themselves are Intel. If your trying to install FCP 6 (FCS 2) this work-around will work...
First you need to install Rosetta from your Snow Leopard OS installation disc:
http://docs.info.apple.com/article.html?path=Mac/10.6/en/27987.html
After doing that you can install FCP 6 (FCS 2). Remember, after installing FCP 6 (FCS 2) you need to apply the updates. This has been discuss many times in the Final Cut Studio forum.
If your trying to install FCP version 5.1 (FCS 1) (a PPC app) and below your out of luck....
If you need further help, here is the URL for the Final Cut Studio forum:
https://discussions.apple.com/community/professional_applications/final_cut_stud io?view=discussions
R -
Can I run FCS (1), and Tiger latest upgrade on an Intel Mac?
Hope this isn't too whacky a question,
but I just don't know the answer.
I plan on buying an Intel Mac, but am in the middle of
a fairly large FCS(1) project and don't want to upgrade to 2.whatever quite yet.
Can I run Tiger 10.4.11 on an Intel Mac?
Also running QT 7.3.0
(ducking)
Thanks,
DavidYes. TIger was the operating system in use when Intel Macs came out. Works fine.
Leopard? Well...that and FCP on any Mac is a crap shoot.
Shane -
Can't open FCP 7 project in FCP 6
Hi all,
I am running FCP 6.0.6 and I just got a project file that I need to open but it's a FCP 7 project file (and won't open on my system). I am trying to get them to export me an XML but that might not be possible. Would anyone be able to help me out and take my FCP project and export a XML that I can read on my system (or have any tricks that I can use to get it to open)? Unfortunately upgrading to FCP 7 isn't an option for us at the moment.
Thanks so much!
-Peter#45 - Opening projects with older versions of FCP
Shane's Stock Answer #45 - How to export your project to work with earlier versions of Final Cut Pro.
Versions of Final Cut Pro aren't backwards compatible. So a project created with FCP 6 cannot be opened with FCP 5...and this even goes into the dot-updates as well. A project created with FCP 5.1.4 cannot be opened by FCP 5.1.1.
Nope, for this you need to use XML. Export your sequence as an XML sequence and import that in the other version of FCP. XML v3 if for FCP 5.1 4 and FCP 6. XML v2 is for FCP 5.0, and XML v1 is for FCP 4.5. So if you need to go from FCP 6 to FCP 5.0.4, you'd use XML v2. For FCP 7 projects that you want to open in FCP 6, XML v4.
To export an entire project, select ALL the bins in the Browser and then choose FILE>EXPORT>XML.
Shane -
Running FCP 5.0.4 on Intel MacBook Pro??
I'm working with a partner across the continent on an HDV project. He is working on a G5 with FCP 5.0.4. I'm on Intel machines here.
We are working with identical (media) drives. He sends me his work project. When I run it on my Intel system it looks like the image is step-framming ... it is not giving me a smooth playback.
Is this a function of running FCP 5.0.4 on an Intel system?
Or could it possibly be something else I am missing?
Any help would be much appreciated,
BenIs this a function of running FCP 5.0.4 on an Intel system?
Probably. FCP 5.0.4 isn't Intel native, so you're running it under Rosetta, which slows it down considerably.
You needed the crossgrade to 5.1 to get an Intel native version. However, the crossgrade isn't available anymore, so you'll have to upgrade to FCP 6 to run properly on Intel.
However, if you're running version 6 and your partner is on version 5.x.x, you will be able to read his projects, but he won't be able to read yours. XML 2 can be used to transfer the projects between the different versions of the program. -
Hi all,
I've just installed Lion (on an external drive, in order that I can test drive it and switch back to Snow Leopard if necessary), and I'm having trouble running FCP. Can anyone suggest a way to get it working? Sounds like it's OK for some, but not others...
I believe I have the latest version of FCP 7. Other relevant info: 2.8GHz intel core i7 iMac, 12GB RAM.
The error message is:
Final Cut Pro cannot be opened because of a problem.
Process: Final Cut Pro [1803]
Path: /Volumes/VOLUME/Applications/Final Cut Pro.app/Contents/MacOS/Final Cut Pro
Identifier: com.apple.FinalCutPro
Version: 7.0.3 (7.0.3)
Build Info: FCPApp-1008261348~8
Code Type: X86 (Native)
Parent Process: launchd [1297]
Date/Time: 2011-09-03 22:24:51.690 +0100
OS Version: Mac OS X 10.7.1 (11B26)
Dyld Error Message:
Library not loaded: /Library/Application Support/ProApps/*/ProFX.framework/Versions/A/ProFX
Referenced from: /Volumes/VOLUME/Applications/Final Cut Pro.app/Contents/MacOS/Final Cut ProAh! I really should have thought of that... no I hadn't installed on the external drive. I thought I'd save space by keeping applications on my internal drive.
And that turned out to be the fix - migrated applications to the new drive also, and FCP booted fine. Thanks David! -
Just upgraded to latest fcs. can i run older version?
we've been using final cut studio (which includes fcp 5) on our ppc g5s for years. we had a project come in that required fcp 6 so i've bought the latest final cut studio upgrade. the only problem is that it comes with fcp7 and can only run on intel macs.
so my question is, as i've bought the upgrade how can i run fcp6 on our g5s?
best wishes
maxas i've bought the upgrade how can i run fcp6 on our g5s?
FCP7 does not include FCP6.
Time to upgrade your computer to an intel Mac (mac pro recommended). That G5 of yours must have been paid off a long time ago ... you need to get ready to climb back on the update merry-go-round ....
x -
Can I run Final Cut Pro on a Macbook?
Hello,
Can somebody tell me if it is possible to run FCP on the new Macbook 2.26GHz Intel Core 2 Duo laptops?
Are there any reported problems?
Thanks
EvanssentIt is possible but not recommended. The FCS specs are here.
http://www.apple.com/finalcutstudio/specs/
Color and Motion won't even open but using FCP has been done. It depends on what kind of footage you plan on using. If you want to do HD you will have problems. SD should be okay.
Maybe you are looking for
-
Standard report with po released date
hi mm experts, request pl let me know is there any standard report which gives the po details and release indicator with released date of po. pl help. regards Srihari
-
My iTunes library won't play most songs, why, & how can I get them back?
I've had these songs on my library for ages, there has been no problem, then the next day... BAM! They don't play. I click on the 'Play Album' button, or the song title and NOTHING happens, the bar doesn't even some up at the top! It's as if I didn't
-
Upgrade Oracle 10g RAC - Oracle 11g RAC on Linux Environment
We are planning to Upgrade our databases to Oracle 10g RAC - Oracle 11g RAC which is Linux Environment. Kindly suggest me the best option for migration. Our production database size is 80GB. - Frest installation of oracle 11g using export/iimport dum
-
Database Cloning (Cold Backup) Doubt
Hi, Operating System : Sun Solaris Production Database Version : 11.1.0.6.2 UAT Server Database Version : 11.1.0.7.0 We have taken the production backup and restored in UAT server. We found that there is a conflict in version. Is there any solution t
-
Not able to connect to iTune Store through iTunes on my Windows pc(Windows Vista 64 bits)
I have got a new iPhone 5. I installed iTunes(11.0.1.12) on my home pc (Windwos Vista 64 Bits). However its not able to connect to iTuneStore. It just showing "Accessing iTune Store" nothing happens afterwards. KIndly help me out with this.