Can't run multiple instances on same page!

Hi,
Since I got no response on the shadowbox forums after 2 weeks, I thought it's worth to post it here and hope someone can help me out.
Note: This is also related on non-joomla pages. I've tested it on plain html as well (by Dreamweaver) and get the same issue.
The following issue was posted by me on the shadowbox forums:
I was wondering if the following is possible.
I've tried almost everything where I can think of, but no luck.
Searched many forums and googled a lot, but without success.
I got feeling that I'm so close and missing some simple solution.
So I'm stuck here, I'm not able to figure it out.
This is what I want to achieve:
My website is running on Joomla 1.5. And I'm using a Shadowbox extension.
In an article I've put multiple SWF movies, like previews acting like buttons.
So when clicking on a SWF button/movie, Shadowbox opens and plays a related FLV movie.
To achieve this part I've followed the instructions at this site under FAQ > first paragraph.
So far so good...
Now the ugly thing is when putting multiple swf buttons on a single page, after clicking a random button Shadowbox always displays the same flv movie. I did some altering with ID's and such but had no luck.
Even try to alter with the Shadowbox options and variables, flashVars and such (at this site under Options and Usage) but that worked out for me.
The strange thing is when placing the buttons, let's say in an article belonging to a section and category and make the articles paginated, after clicking the swf button the related flv plays. Browsing to the next page and clicking the button, the related flv will play also. This is the way it should be. Unfortunately it doesn't work when multiple buttons are displayed on the frontpage or an single article regardless whether they belong to sections and categories or not.
Even when a single code is placed in a single article and display 2 or more articles containg a different swf and a different related flv link only the last added flv plays with every random swf button/movie.
This the code I'm using for each swf (actionscript behavior):
FIRST INSTANCE SWF=====================================
on (release) {
getURL("javascript:openShadowbox
('http://test.cquence-multimedia.nl/images/cqmm_test.flv','flv','title')");
SECOND INSTANCE SWF=====================================
on (release) {
getURL("javascript:openShadowbox
('http://test.cquence-multimedia.nl/images/WizardFinal_1.flv','flv','title')");
================================================
This is the code I'm using in the article (2 instances on a single page):
=======================================================
<!-- FIRST INSTANCE -->
<script src="Scripts/swfobject_modified.js" type="text/javascript"></script>
<script src="Scripts/AC_RunActiveContent.js" type="text/javascript"></script>
<object id="FlashID" classid="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000" width="150" height="50" data="images/default_swf_button.swf">
<param name="movie" value="images/default_swf_button.swf" />
<param name="quality" value="high" />
<param name="wmode" value="opaque" />
<param name="swfversion" value="9.0.45.0" /> <!-- This param tag prompts users with Flash Player 6.0 r65 and higher to download the latest version of Flash Player. Delete it if you don’t want users to see the prompt. -->
<param name="expressinstall" value="Scripts/expressInstall.swf" /> <!-- Next object tag is for non-IE browsers. So hide it from IE using IECC. --> <!--[if !IE]>-->                       
<object width="150" height="50" data="images/default_swf_button.swf" type="application/x-shockwave-flash">
<!--<![endif]-->
<param name="quality" value="high" />
<param name="wmode" value="opaque" />
<param name="swfversion" value="9.0.45.0" />
<param name="expressinstall" value="Scripts/expressInstall.swf" /> <!-- The browser displays the following alternative content for users with Flash Player 6.0 and older. -->
<div>
<h4>Content on this page requires a newer version of Adobe Flash Player.</h4>
<p><a href="http://www.adobe.com/go/getflashplayer"><img src="http://www.adobe.com/images/shared/download_buttons/get_flash_player.gif" border="0" alt="Get Adobe Flash player" width="112" height="33" /></a></p>
</div>
<!--[if !IE]>-->
</object>
<!--<![endif]-->
</object>
</p>
<script type="text/javascript">
swfobject.registerObject("FlashID");
</script>
<script type="text/javascript">
function openShadowbox(content, player, title, width, height, options){
Shadowbox.open({
content:"http://test.cquence-multimedia.nl/images/cqmm_test.flv",
player:"flv",
title:"SHADOWBOX FLASHBUTTON TEST FLV",
width:"800px",
height:"600px",
</script>
<!-- SECOND INSTANCE -->
<script src="Scripts/swfobject_modified.js" type="text/javascript"></script>
<script src="Scripts/AC_RunActiveContent.js" type="text/javascript"></script>
<object id="FlashID1" classid="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000" width="150" height="50" data="images/default_swf_button2.swf">
<param name="movie" value="images/default_swf_button2.swf" />
<param name="quality" value="high" />
<param name="wmode" value="opaque" />
<param name="swfversion" value="9.0.45.0" /> <!-- This param tag prompts users with Flash Player 6.0 r65 and higher to download the latest version of Flash Player. Delete it if you don’t want users to see the prompt. -->
<param name="expressinstall" value="Scripts/expressInstall.swf" /> <!-- Next object tag is for non-IE browsers. So hide it from IE using IECC. --> <!--[if !IE]>-->        
<object width="150" height="50" data="images/default_swf_button2.swf" type="application/x-shockwave-flash">
<!--<![endif]-->
<param name="quality" value="high" />
<param name="wmode" value="opaque" />
<param name="swfversion" value="9.0.45.0" />
<param name="expressinstall" value="Scripts/expressInstall.swf" /> <!-- The browser displays the following alternative content for users with Flash Player 6.0 and older. -->
<div>
<h4>Content on this page requires a newer version of Adobe Flash Player.</h4>
<a href="http://www.adobe.com/go/getflashplayer"><img src="http://www.adobe.com/images/shared/download_buttons/get_flash_player.gif" border="0" alt="Get Adobe Flash player" width="112" height="33" /></a>
</div>
<!--[if !IE]>-->
</object>
<!--<![endif]-->
</object>
<script type="text/javascript">
swfobject.registerObject("FlashID1");
</script>
<script type="text/javascript">
function openShadowbox (content, player, title, width, height, options){
Shadowbox.open({
content:"http://test.cquence-multimedia.nl/images/WizardFinal_1.flv",
player:"flv",
title:"SHADOWBOX FLASHBUTTON TEST BRIAN",
width:"800px",
height:"600px",
</script>
=======================================================
This is the link to the page in question:
http://test.cquence-multimedia.nl/index.php?option=com_content&view=article&id=9&Itemid=13
Please, any suggestions would be great!
Thanks in advance.
Best Regards,
John.

Sorry...I still don't get it. What is it about Windows FUS that keeps iTunes from running running the process twice? It can run many other non-Apple windows apps in multiple user sessions (commercial apps, open source apps, audio/video apps, networked apps). I can even run two different virtual machines at the same time under two different user sessions.
Why can iTunesHelper.exe run twice but iTunes.exe cannot? Why can I run Safari at the same time? Quicktime Player runs fine under multiple user sessions.
Blaming it on Windows and/or FUS sounds like FUD. Can anyone give a valid technical reason? Semaphores? Mutexes? An admission (and explanation) that the Windows version is purposely crippled?

Similar Messages

  • Can we have Multiple Instance on same Node in Oracle 10g RAC

    Hi All,
    I am planning to implement the RAC in Oracle 10g.Before that i have one doubt regarding RAC.
    My question is "Can we create multiple Instance on Same node(Server) ?"
    is it possible.
    Any ideas or thoughts would be apperciable.
    Thanks in Advance.
    Anwar

    This is where it is important to keep the separation between 'database' and 'instance'.
    A database is the set of files that contains the data (and the redo, control files, etc). A database does nothing by itself, other than take up lots of disk space.
    An instance is theCPU cycles (running software) and the memory to control the database.
    In Oracle RAC, you can have as many instances controlling one database [at the same time] as you want (within reason). Each instance must be able to access the disk(s) that contains the database.
    These multiple instances can be on the same computer (effectively taking up a lot of server memory and CPU for nothing) or they can be on separate computers.
    If they are on separate computers, the disk subsystems must be able to be shared across computers - this is occasionally done using operating system clusterware and is the main reason why clusterware is required at all. (This is also the toughest part of the pre-requisites in setting up a RAC and is very vendor dependent unless you use ASM.)
    These instances need a communication connection to coordinate their work (usually a separate network card for each computer) so they do not corrupt the disk when they are trying to access the same file, and possibly the same block, at the same time.
    In a RAC configuration, instances can be added, started, running, stopped and removed independent of each other (allowing a lot of high availability) or can be started and stopped as a group.
    Each instance gets it's own SID, which is in no way any different than a non-RAC SID. It's just the name of a service that can be invoked. The neat thing is that the SID
    a) helps the DBA keep things straight by lettiung us talk about 'instance A' (the Oracle software to be running over on computer A) vs 'instance B' when starting, stopping and managing;
    b) helps the application by providing targets that can be listed in the TNSNAMES.ORA [against one service alias], which is used by ORacle Networking to provide automated load balance or failover (instance/SID a is not available, I guess I'll try the next in the list)
    Hope that helps the concept level a bit.

  • Running multiple instances from same oracle home

    Hi Gurus,
    I am preparing for OCA 11g examination. I had a question about running multiple instances from same oracle home. While reading the book I came across a statement about database control which says "If there are several database instances running off the same Oracle home, then each will have its own Database Control instance".
    Now I assume that this statement implies multiple instances accessing the same physical database (which as per my knowledge can happen only in case of a RAC).
    I am not able to understand how exactly can you have multiple database instances in a single oracle home. I have installed Oracle 11g on my computer whose oracle home is +"D:\oracle\product\10.2.0\db_1"+; now this directory houses all the binaries (executables and folders like admin,bin, etc) for the oracle instance that I have installed (the instance name is ocp1). Now if I am to install or create another Oracle Instance (say ocp2) in the same home, wont there be a conflict of binaries of the two instances in the same home ?
    Basically,it makes sense if db_1 folder is further split into multiple folders, one for each instance (for example, one for ocp1 & one for ocp2); each of these folders will then contain the binary files, libraries,etc for its own instance; but, this is not the case, here db_1 houses all the binaries directly under it ...
    The other question which stems from the statement I mentioned above is that if having multiple instances running from same oracle home accessing the same physical database, can this arrangement be called RAC at all; or does RAC dictate that you cannot have multiple instances that are accessing the same database have to be installed on physically separate machines and so you cannot have two RAC instances (accessing same physical database) installed on the same computer ??
    I hope my questions are not too much confusing ... !!
    Cheers,
    Sudripta

    Hello,
    "If there are several database instances running off the same Oracle home, then each will have its own Database Control instance".This is true, and also means each instance will have its separate database (i.e. dbf files etc.) & separate DB Control. Usually in this case you create several instances on the same node.
    Now I assume that this statement implies multiple instances accessing the same physical database (which as per my knowledge can happen only in case of a RAC).You are correct about RAC where several instances (usually running on separate nodes) access the RAC.
    More info:
    1 Oracle Home - 1 Database - 1 SID is possible.
    1 Oracle Home - Many Databases - Many SID is possible.
    1 Oracle HOme - 1 Database - Multiple SID is possible and this is called RAC.

  • How can i run multiple instances of Photoshop EXE at the same time on windows 7

    Alright. You may ask why do you need multiple ?
    Assume that i have 10000 PSD files in 10 different folders
    I have a script that just save as them as PNG
    And these files are each 3000x3000 px
    My computer has 8 cores and 1 photoshop exe is only using 1 cpu core
    Also i have SSD raid system it has 750 mb read write per second
    So right now i am wasting my time with running only 1 photoshop exe instead of at least 4

    I'm not aware of a way to run multiple instances or different versions of photoshop at the same time on windows.
    Assuming of course they are all installed on the same operating system.
    On mac versions you can running two different versions of photoshop at the same time, but i don't think that's possible on windows where it
    appears that only one version of photoshop can run at a time.

  • How can I run multiple instances of an app in netbeans?

    Hi,
    I would like to run multiple instances of an app in netbeans, this is essential when making GUI changes and you want to compare them with the older version.
    Thanks in advance,

    It is still true that Netbeans cannot launch the same project twice, even with the latest 7.2 and JavaFX Beta version. When trying to "run" the second instance, Netbeans tries to rebuild the project jar file but can't delete it because it is "locked" by the first instance.
    For JavaFX projects, I start one instance by double-clicking the jar file (in the project's dist folder), then use Netbeans to launch the second instance. For comparing your app's old vs. new screens, save the old app version by copying the project folder to another place and use the double-click jar to launch the old app, then proceed to revise the new app version and launch it under Netbeans. That's how you run one version "outside" another version.

  • Running multiple instances on same machine

    I need to run multiple instances of BEA WLS on a unix machine. I need 4 separate instances (dev and test for two different departments) on one machine and two production instances on another machine. What is the best way to go about separating these (ex. an account or directory structure for each)?
    Thanks,
    Roger ---|-

    Dev/Test:
    Give each one its own domain name - i.e. a separate directory under config. This
    works well.
    Production:
    Do the same, but to keep licensing costs down, I'd be inclined to run everything
    on a single instance.
    simon.
    Roger Cornejo wrote:
    I need to run multiple instances of BEA WLS on a unix machine. I need4 separate instances (dev and test for two different departments) on
    one machine and two production instances on another machine. What is
    the best way to go about separating these (ex. an account or directory
    structure for each)?
    Thanks,
    Roger ---|-

  • Running multiple instances of same servlet

    I am trying to run multiple webapps off of the same weblogic5.1 instance.
              I have setup the webapps and they work individually, but I need one servlet
              to load at startup.
              I have only been able to do that by including it by name in
              weblogic.properties
              #webApp named
              weblogic.httpd.webApp.demand=d:/stat_forecast/
              #register servlet so it runs on startup
              weblogic.httpd.register.AppInitServlet=com.ai.servlets.AppInitServlet
              weblogic.httpd.initArgs.AppInitServlet=AppConfigFilename=d:/stat_forecast/pr
              operties/forecast.properties
              weblogic.system.startupClass.aiservlet=weblogic.servlet.utils.ServletStartup
              weblogic.system.startupArgs.aiservlet=servlet=AppInitServlet
              This works until I try to add another instance of AppInitServlet for a
              different webApp
              #webApp named
              weblogic.httpd.webApp.supply=d:/supply/
              #register servlet so it runs on startup
              weblogic.httpd.register.AppInitServletS=com.ai.servlets.AppInitServlet
              weblogic.httpd.initArgs.AppInitServletS=AppConfigFilename=d:/supply/supply.p
              roperties
              weblogic.system.startupClass.aiservletS=weblogic.servlet.utils.ServletStartu
              p
              weblogic.system.startupArgs.aiservletS=servlet=AppInitServletS
              The servlet does not run a second time.
              Is there a way to move the AppInitservlet to inside the webApp and maybe use
              the web.xml to start each one individually?
              Thank you for any insight
              John Norton
              Indent Inc
              John Norton
              Indent Inc.
              (Innovative decision technologies, inc.)
              [email protected]
              

    Replying to myself to try and clarify.
              We are trying to run 2 or more webapps, each webapp tryes to call the
              servlet AppInitServlet.
              The servlet will not allow more than one instance to be in a context.
              In tomcat the servlet works to give a separate instance for each app.
              "JohnNorton" <[email protected]> wrote in message
              news:[email protected]...
              > I have sp8 on one version and that does work for the load on startup. One
              > problem solved, thank you.
              > Second part of same problem
              > In tomcat where we were developing, we could have multiple instances
              of
              > the AppInitservlet (for different Apps) and it kept them all separate.
              > In WL51 it starts the first correctly, but does not keep them
              separate,
              > so the second instance does not happen. It is designed so that
              multiple
              > calls do not instantiate (this would normally be within one instance of
              one
              > App).
              > I had thought that if the servlet was load-on-startup from the webApp
              > web.xml file that they would be separate. Any more ideas or clues?
              >
              > Thank you
              >
              > John Norton
              >
              > "Dimitri Rakitine" <[email protected]> wrote in message
              > news:[email protected]...
              > > Try it with the latest service pack - load-on-startup in web.xml was not
              > > supported until sp8 or so.
              > >
              > > JohnNorton <[email protected]> wrote:
              > > > I am trying to run multiple webapps off of the same weblogic5.1
              > instance.
              > > > I have setup the webapps and they work individually, but I need one
              > servlet
              > > > to load at startup.
              > > > I have only been able to do that by including it by name in
              > > > weblogic.properties
              > >
              > > > --------------
              > > > #webApp named
              > > > weblogic.httpd.webApp.demand=d:/stat_forecast/
              > >
              > > > #register servlet so it runs on startup
              > > > weblogic.httpd.register.AppInitServlet=com.ai.servlets.AppInitServlet
              > > >
              >
              weblogic.httpd.initArgs.AppInitServlet=AppConfigFilename=d:/stat_forecast/pr
              > > > operties/forecast.properties
              > > >
              >
              weblogic.system.startupClass.aiservlet=weblogic.servlet.utils.ServletStartup
              > > > weblogic.system.startupArgs.aiservlet=servlet=AppInitServlet
              > > > ---------------
              > > > This works until I try to add another instance of AppInitServlet for a
              > > > different webApp
              > > > #webApp named
              > > > weblogic.httpd.webApp.supply=d:/supply/
              > >
              > > > #register servlet so it runs on startup
              > > > weblogic.httpd.register.AppInitServletS=com.ai.servlets.AppInitServlet
              > > >
              >
              weblogic.httpd.initArgs.AppInitServletS=AppConfigFilename=d:/supply/supply.p
              > > > roperties
              > > >
              >
              weblogic.system.startupClass.aiservletS=weblogic.servlet.utils.ServletStartu
              > > > p
              > > > weblogic.system.startupArgs.aiservletS=servlet=AppInitServletS
              > >
              > >
              > > > The servlet does not run a second time.
              > > > Is there a way to move the AppInitservlet to inside the webApp and
              maybe
              > use
              > > > the web.xml to start each one individually?
              > > > Thank you for any insight
              > >
              > > > John Norton
              > > > Indent Inc
              > > > --
              > > > *************************************************
              > > > John Norton
              > > > Indent Inc.
              > > > (Innovative decision technologies, inc.)
              > > > [email protected]
              > >
              > > > *************************************************
              > >
              > >
              > >
              > >
              > > --
              > > Dimitri
              >
              >
              >
              

  • Can you run multiple iPods on same computer?

    I have a "regular" ipod and have successfully loaded iTunes (dated 10-12-2005) on my pc. My husband just bought a shuffle but we cannot seem to run them on the same pc. Why not? iTunes just will NOT recognize the shuffle. I have successfully loaded the shuffle on our kids' pc; but all 2,000 songs are on my pc. I DON'T want to reload all of them. ANY suggestions? Comments?
    I did try to update the iTunes. Ran into other problem - iTunes wouldn't even start - had to uninstall/reinstall.
    Dell   Windows XP  

    I had the same problem with iTunes not recognizing my
    iPod Shuffle. What I did to fix the problem was to
    download the latest version of the iPod updater and
    select the restore option. It should reset the
    factory settings and flash the device with the latest
    software. I recommend trying to get iTunes to
    recognize the shuffle on its own, and then connecting
    the additional unit.
    Sounds great - but every time I load updater I cannot even start iTunes. VERY frustrated.

  • Can't create multiple links on same page

    This is odd...when editing a page in Contribute, I can create
    a link (of any type), but when I go to create another link, I get
    the error "You are not allowed to perform that action....". (We are
    in Contribute 3.11 and using DW templates with very simple editable
    regions.) However, if I publish the page then go back into Edit
    mode, I can create the second link! But then the same error occurs
    if I try (right away) to create a third link.
    This is frustrating and I can't imagine I have to publish the
    stupid page after every link. Anyone have any ideas as to why this
    might by happening? Thanks in advance!

    Hi Bryan.
    Here's a link to the multi-up printing templates in HP Photo Creations:
    https://shop2.rocketlifeproduction.com/hpfe6fd34b208847e8f8254b9be96e8c4c/catalog.html?ocat=%40print...
    If you don't have HP Photo Creations already, you can download it on that page.
    Hope this helps,
    RocketLife
    RocketLife, developer of HP Photo Creations
    » Visit the HP Photo Creations Facebook page — news, tips, and inspiration
    » See the HP Photo Creations video tours — cool tips in under 2 minutes
    » Contact Customer Support — get answers from the experts

  • Detecting multiple instances of same application on startup.

    How can I detect multiple instances of same application on startup? I would like to display a message to the user stating that the application is already running [and then close out].

    How can I detect multiple instances of same
    application on startup? I would like to display a
    message to the user stating that the application is
    already running [and then close out].Congratulations on being the bazillionth person to ask this kind of question without bothering to search the internet.

  • Running Multiple Instance of indesign server using com calls

    Hello All,
    I am new to this community , can anyone help me in understanding how can i run multiple instance of indesign server using com calls.. i am using jacob library in java for com calls ..
    Thanks

    Hi Soni,
    Web colsole --> your domain --> your server --> configuration -->
    general --> Listen Port / Listen Address
    Regards,
    Slava Imeshev
    "Soni " <[email protected]> wrote in message
    news:3dcfbbcb$[email protected]..
    >
    Hi:
    Is it possible to run two seperate instances of WebLogic server 6.1 onsame the
    server both listening on port 80?
    Details about the instances:
    Instance 1
    Domain names : fasnets
    Server name: envext
    Listen Address : 155.x.x.1
    Listen Port : 80 :
    External DNS : www.acme.com
    Instance 2
    Domain names : fasnets1
    Server name: envext1
    Listen Address : 155.x.x.2
    Listen Port : 80 :
    External DNS : www.acme1.com
    Thanks,
    Soni

  • Can I create multiple instances of  realplayer plug-in in one jsp page?

    I want to play meny video files in one jsp web page, these video files are to be played with the embeded plug-in of realplayer, each plug-in was linked(use its SRC property) a different video file. But, to my surprise, when I press the play button, every player played the same video file,not its specified file.
    I have no idea why it did so and what can I do?
    Whether can I create multiple instances of realplayer plug-in in one jsp page, that is to say, each instance is independent of others?
    thanks in advance!

    Generally speaking, Internet Explorer tries not to launch multiple versions of a plug-in. So what's happening is that you load the first video clip, and then before it has a chance to play, you load the second video clip into the same window. (It's like changing songs in WMA.)
    In some cases - this may not work for Real Player, but it's worth trying - if you spawn a new window through a hypertext link and then launch the plug-in in that window, IE will treat it separately. Otherwise, you could not, for example, run two Macromedia Flash applications from different web sites at the same time.
    Keep in mind that only one program can access the soundcard at a time, so Real Player may purposely "pause" or "cancel" other video streams until the active one finishes. If you were using the desktop version, selecting another video by any means aborts the currently running video (i.e., RP won't let you create a separate instance of it).
    The easiest solution is to create a wrapper JSP file that takes the name of the video clip, and plays it. Call that JSP and specify that it should be opened in a new window via the TARGET keyword in the anchor tag. Then hopefully RP itself won't block a second window from running.

  • Disallow running multiple instances of the same web start application..

    on the client? I have an application that is launched on the client by clicking on the link to the JNLP file. The problem is that I don't want the application to launch twice if the user clicks the link twice. Is there a way to keep web start from running multiple instances of the same app?
    I don't want to just disable the button after it is clicked because then the user won't be able to get back in if they need to.
    Any help out there?
    Thanks,
    Melanie

    The way I do this is to try connect to an obscure port number on the localhost at startup.
    if this connection succeeds I assume the app is already running. otherwise the program continues and registers as a server at that port number.
    I actually take this a little bit further by registering a web server at this port (I use the Brazil server), That way if the program finds an instance of itself running it can send a message to the web server and ask the program to do something (like start another window if,for instance you wanted to allow this but only within the same VM).

  • Running multiple instances of program at same time problems

    I have a c++ program that uses BerkeleyDB 4.8.26 with transactions. Program works well, and I can run multiple instances of program and they cooperate on database very well. Problem arises when I run a small test program that runs 10 instances of the same program at same time.
    Test program opens database with transactions, it does some database reads and writes and quits. This test is run in 10 instances of the same program at the same time. Some instances run and finish well, other instances end up with some of these errors:
    unable to allocate memory for the lock table
    PANIC: Cannot allocate memory
    Error opening environment: DB_RUNRECOVERY: Fatal error, run database recovery
    another with:
    db_files/__db.001: No such file or directory
    db_files: No such file or directory
    Error opening environment: Invalid argument
    others with this one:
    Log file corrupt at LSN: [1][84474]
    fileops: close db_files/log.0000000001
    PANIC: Invalid argument
    unable to join the environment
    db_files: No such file or directory
    Error opening environment: DB_RUNRECOVERY: Fatal error, run database recovery
    I don't understand reason of this error, as I thought (and read) that BerkeleyDB should be able to handle multiple instances accessing database and is thread-safe.
    I tried to run the test on both NFS and local disk drive with same results.
    Is there anyone with ide what could be causing this problem ? My platform is x86_64 GNU/Linux 2.6.18-164.el5
    Edited by: Miro Janosik on 21.9.2010 22:42

    If there is someone who would like to look at this problem I'd like to show you program log files with verbose output turned on. There are 11 log files in the archive: http://bin.mypage.sk/FILES/log.rar
    Log files that end up with lines like this one below mean that program finished running ok:
    4000|0     4     20100922 07:07:24.094     20100922 07:07:24.094     FLOW_CMD
    Here below is output from one of log files:
    FilePersistentStorage::open() start
    FilePersistentStorage::open() ReadDir
    FilePersistentStorage::open() db_env_create
    FilePersistentStorage::open() db_env_create ok
    FilePersistentStorage::open() set cachesize
    FilePersistentStorage::open() set_tx_max
    FilePersistentStorage::open() set_timeout
    FilePersistentStorage::open() set_lk_detect
    FilePersistentStorage::open() exists homedir?
    envp->open
    FilePersistentStorage::open() envp->open
    fileops: stat /var/tmp
    fileops: open db_files/__db.rep.init
    fileops: close db_files/__db.rep.init
    fileops: open db_files/__db.001
    fileops: close db_files/__db.001
    fileops: open db_files/__db.001
    fileops: mmap db_files/__db.001
    fileops: close db_files/__db.001
    unable to join the environment
    fileops: directory list db_files
    fileops: unlink db_files/__db.005
    fileops: unlink db_files/__db.004
    fileops: unlink db_files/__db.003
    fileops: unlink db_files/__db.002
    fileops: unlink db_files/__db.001
    fileops: open db_files/__db.001
    fileops: open db_files/__db.001
    fileops: read db_files/log.0000000001: 12 bytes at offset 371
    Finding last valid log LSN: file: 1 offset 371
    fileops: close db_files/log.0000000001
    fileops: open db_files/__db.005
    fileops: seek db_files/__db.005 to 794624
    fileops: write db_files/__db.005: 8192 bytes
    fileops: mmap db_files/__db.005
    fileops: close db_files/__db.005
    fileops: open db_files/__db.006
    fileops: seek db_files/__db.006 to 376832
    fileops: write db_files/__db.006: 8192 bytes
    fileops: mmap db_files/__db.006
    fileops: close db_files/__db.006
    fileops: open db_files/log.0000000001
    fileops: read db_files/log.0000000001: 12 bytes at offset 335
    fileops: read db_files/log.0000000001: 371 bytes at offset 0
    fileops: directory list db_files
    fileops: open db_files/log.0000000001
    fileops: read db_files/log.0000000001: 28 bytes
    fileops: close db_files/log.0000000001
    Recovery starting from [1][243]
    fileops: close db_files/log.0000000001
    fileops: open db_files/log.0000000001
    fileops: read db_files/log.0000000001: 28 bytes
    fileops: write db_files/log.0000000001: 92 bytes at offset 371
    fileops: flush db_files/log.0000000001
    fileops: close db_files/log.0000000001
    fileops: open db_files/log.0000000002
    fileops: close db_files/log.0000000002
    fileops: open db_files/log.00002
    fileops: close db_files/log.00002
    fileops: open db_files/log.0000000001
    fileops: seek db_files/log.0000000001 to 463
    fileops: write db_files/log.0000000001: 4096 bytes
    fileops: write db_files/log.0000000001: 4096 bytes
    fileops: write db_files/log.0000000001: 4096 bytes
    fileops: write db_files/log.0000000001: 4096 bytes
    fileops: write db_files/log.0000000001: 3633 bytes
    fileops: close db_files/log.0000000001
    Recovery complete at Wed Sep 22 07:07:23 2010
    Maximum transaction ID 80000002 Recovery checkpoint [1][371]
    FilePersistentStorage::open() ok
    envp->lock_detect
    FilePersistentStorage::open() lock_detect
    rejected locks count: 0
    db_create
    dbp->open
    fileops: stat db_files/test_aaps.db
    fileops: stat db_files/test_aaps.db
    fileops: stat db_files/__db.80000001.d9f23b56
    fileops: open db_files/log.0000000001
    fileops: read db_files/log.0000000001: 28 bytes
    fileops: write db_files/log.0000000001: 67 bytes at offset 463
    fileops: flush db_files/log.0000000001
    fileops: open db_files/__db.80000001.d9f23b56
    fileops: stat db_files/__db.80000001.d9f23b56
    fileops: seek db_files/__db.80000001.d9f23b56 to 0
    fileops: write db_files/__db.80000001.d9f23b56: 4096 bytes
    fileops: seek db_files/__db.80000001.d9f23b56 to 4096
    fileops: write db_files/__db.80000001.d9f23b56: 4096 bytes
    fileops: flush db_files/__db.80000001.d9f23b56
    fileops: close db_files/__db.80000001.d9f23b56
    fileops: stat db_files/test_aaps.db
    fileops: stat db_files/__db.80000001.d9f23b56
    fileops: unlink db_files/__db.80000001.d9f23b56
    fileops: open db_files/log.0000000001
    fileops: read db_files/log.0000000001: 12 bytes at offset 463
    DB_LOGC->get: LSN 1/463: invalid log record header
    DB_TXN->abort: log undo failed for LSN: 1 463: Input/output error
    fileops: close db_files/log.0000000001
    PANIC: Input/output error
    fileops: open db_files/log.0000000001
    fileops: read db_files/log.0000000001: 12 bytes at offset 463
    PANIC: fatal region error detected; run recovery
    DB_LOGC->get: LSN: 1/463: read: DB_RUNRECOVERY: Fatal error, run database recovery
    DB_TXN->abort: log undo failed for LSN: 1 463: DB_RUNRECOVERY: Fatal error, run database recovery
    fileops: close db_files/log.0000000001
    PANIC: DB_RUNRECOVERY: Fatal error, run database recovery
    PANIC: DB_RUNRECOVERY: Fatal error, run database recovery
    dbp->open end
    dbp->close
    PANIC: fatal region error detected; run recovery
    envp->close
    File handles still open at environment close
    Open file handle: db_files/log.0000000001
    fileops: close db_files/log.0000000001
    PANIC: fatal region error detected; run recovery
    Database 'db_files//test_aaps.db' open failed: DB_RUNRECOVERY: Fatal error, run database recoveryDatabase close failed: DB_RUNRECOVERY: Fatal error, run database recovery
    environment close failed:

  • How can I print multiple copies of same photo onto one page on iPhoto 9.5.1?

    How can I print multiple copies of same photo onto one page on iPhoto 9.5.1? I was able to do it on the old iPhoto, but can't seem to be able to do it on the new iPhoto. Grrr...

    Photos does the same thing.... Only workaround I can come up with is to create a template in Pages and copy &amp; paste.

Maybe you are looking for

  • Photoshop Elements 10 does not work properly, won't open; Error:213:11 ; What does that mean?

    I've downloaded and installed my version of PS Elements, but while I try to open it, it stops working as an error accurred. Error:213:11 I don't know what I did wrong while I got all my licences...

  • Fixing MacBook Pro For Friend - Now Won't Turn On - HELP!

    Good Afternoon - When it comes to computers, I'm basically a PC guy.  I"m a network admin for a big company and work with Windows all day.  I'm an advid iPhone / iPad user too, though, and do a bit with OSX. Yesterday, a friend at work and I were tal

  • LSMW : Sales Order DI : Extend the stucture?

    Hello Friends, We are currently using Direct Input approach for LSMW Sales Order. It all working fine and SO is uploaded But there are some 20 odd fields which our clients wants to be uploaded from legacy system [eg MUEBS (Char Display), AUDAT [Which

  • Clip splitting and then copying

    Hello all, I guess there should be already an answer to my question somewhere, but as I haven't found it in less than 30 minutes, I then add a new post: I've imported a big .dv clip (export from a friend's iMovie project - the original scenes are no

  • Stopping Agents From With the Grid Console

    Hello. We are using Grid COntrol 10.2.0.5.0 to monitor various 10g DBs. I have used blackouts in the past when I do various scheduled maintenance on our DBs. We need to physically relocate our Grid OMS and Repository to another RACK (not RAC). Both t