Can't run Test-CsLisCivicAddress

This was working just a few days ago, while our Lync deployment expert was here (naturally.) But now it doesn't seem to work.
I needed to update one of the locations in our LIS database. It's a field office that moved three doors down, so the street number changed. Anyway, I removed the old entry and recreated it with the new address; no problem there. We're partnered
with 911 Enable, so I needed to run test-CsLisConfiguration -UpdateValidationStatus. Like I said, it was working fine just a couple of weeks ago. Now when I run it, I get this error:
I verified that I have the right credentials, and even tried running it using our deployment experts account. I also tried running it with a specific address instead of the entire list, but got the same error. Our deployment expert ran the same command
in his own environment (not ours, but he's also partnered with 911 Enable), and it ran no problem. Consequently I have to assume that the problem isn't on 911 Enables side.
Has anyone seen this before?
Thanks in advance!

Hi,
I cannot find the command test-CsLisConfiguration –UpdateValidationStatus
on any documents, if you want to test the location information server configuration you can refer to the command in the link below:
http://technet.microsoft.com/en-us/library/gg398497.aspx
You can also enable Lync logging tool for further troubleshooting:
Here is the link of using the Lync logging tool:
http://blog.schertz.name/2011/06/using-the-lync-logging-tool/
Note: Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there. Please make
sure that you completely understand the risk before retrieving any suggestions from the above link.
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support

Similar Messages

Can't run/test movies in Flash

I'm running Flash CS5 on a Mac (yes I've got Adobe running). However, when I press Cmd and Rtn I get the followng error message: "Error opening URL 'file:////Volumes/myname/Documents/myname%27s%20docs/Adobe/Mastersuite/Dreamweaver/jbsite 005/posts/links002.swf'"
Any suggestions about how I can run movies in Flash?
Thanks

We can try deleting your user configuration folder and preferences file.
Do this:
1. Quit Flash if you have it running.
2. Browse to Volume/Users/<username>/Library/Application Support/Adobe/ delete Flash CS5 folder.
3. Go to this link and follow instructions to delete your preferences files: http://kb2.adobe.com/cps/520/cpsid_52048.html
4. Relaunch Flash.
Let me know if this resolved your issue.
Thanks,
Q

Can't run test.fmx

I installed a new instance of
win2k,
oracle 8i server
forms 6i server
on a test machine and I can't get the test form to show up in the web browser. The forms server log looks like this:
[02/07/01 16:29:41 Pacific Standard Time]::Server Start-up Data:
Server Log Filename: d:\oracle\forms\ifsrv.log
Server Hostname: thebeast
Server Port: 9000
Server Pool: 1
Server Process Id: 812
[02/07/01 16:29:44 Pacific Standard Time]::Child Process not ready 964
[02/07/01 16:34:58 Pacific Standard Time]::LISTN: Connection Request [ConnId=0, Addr=127.0.0.1:6404]
[02/07/01 16:34:58 Pacific Standard Time]::RUNFORM Client Connected [ConnId=0, PID=964]
[02/07/01 16:36:09 Pacific Standard Time]::LISTN: Connection Request [ConnId=1, Addr=127.0.0.1:6660]
[02/07/01 16:36:09 Pacific Standard Time]::RUNFORM Client Connected [ConnId=1, PID=2024]
[02/07/01 16:39:26 Pacific Standard Time]::LISTN: Connection Request [ConnId=2, Addr=127.0.0.1:7172]
[02/07/01 16:39:26 Pacific Standard Time]::RUNFORM Client Connected [ConnId=2, PID=232]
thanks

Yes, Im also getting the same error.
This is what I've done:
1) Installed Jinitiator on the client m/c.
2) Created a html- with coding for IE and Netscape.
3) Configured Jinitiator Control panel. with debug on. and gave the path for JRE.
4) When the hmtl is launched, the applet is beginning to load, but the error as indicated
by arjohnson popus up.
-But virtual path is meant only when you are using the oracle web-server as well.
I m using just the Forms Server to launch the form on the web.
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Joseph Schwertner ([email protected]):
Try to turn on the Java console on Jinitiator and look if there everything is OK with the virtual paths. Sometimes there is a virtual path that is not matched to physical one.<HR></BLOCKQUOTE>
null

Hi, I got the problem with Firefox 27.0.1. I can not run Selenium on Firefox after login a website for automation testing. The browser is not responding.

Hi, I got the problem with Firefox 27.0.1. I can not run Selenium on Firefox after login a website for automation testing. The browser is not responding. However when I close Nunit, the page is back to be normal. The title is returned to the name of website without "not responding". I sure this problem did not happen on Firefox version 26. I just got this problem when firefox upgrading automatically to version 27. Please help me fix this problem because it is very important for my work. If you need more information pls send your concerns via my email address.
Thanks so much

Hi, the work around suggested above should put you in working mode in the meantime. However to help investigate the issue it is possible to analyze what is not loading or taking a long time by analyzing the network traffic or http headers of the Nunit web page.
*[https://addons.mozilla.org/en-us/firefox/addon/live-http-headers/]
*Web developer Tools > Web console
If you post the results with out the user data, we are happy to help.

Can the MTM Test Run 'build number' field be unhooked from a real build without using a fake or empty string.

I'm working on integrating MTM Test Runs (Via TFS/MTM API) with our automated build & test system, and I've noticed that if I supply a valid build number when creating a test run, and I later delete the build, the test run data disappears with it.
I know that I can deselect 'Test Results' in the Delete Build dialog, and in the Retention Policy for the Build Definition, but in the interest of avoiding any confusion or mistakes (we have a lot of build definitions to maintain), I wonder if it would be
possible to instruct the test run to prevent a deliberate link.
While we're on the subject, if anyone could explain the benefits or potential uses this link might provide (even under conditions that may not meet our usage) I would be very grateful.

We don't use MTM to run tests, we have another system that works better with our test environments. We will be using MTM to track pass/fail data for the tests that have run, by creating test case workitems for them and using test run and test result objects
to store the data.
Going back to my question, I'm looking for a way to prevent a test run object from linking to a TFS Build so I can prevent TFS from removing the test run when I delete it. We have a lot of builds and we frequently remove old ones, I need a way to retain
historical data for test runs.
I understand that under normal circumstances, the build number would first be used to retrieve the bits from the build to test with, but since we're not using that system, I'd like to know more about how it might be used in other ways - for example, for
querying or associating work items. We're considering not using this field, or modifying it in such a way that it doesn't create the relationship with a build that I mentioned, and I would like to know what functionality we would lose by doing this.

Can you run Hardware Test from older DVD?

Hello,
My mini2,1 came with OS 10.4. I have the two original system discs. SInce I bought it right before 10.5 was released, Apple sent me a single Leopard Upgrade disc. Does anyone know if the Apple Hardware Test is on the 10.5 upgrade disc? If it isn't, can I run the test from Disc 1 of the original 10.4 DVD's even though the mini is now running 10.5?
Thanks in advance.

Excellent. I found the hardware test on the original 10.4 OS X Install Disc 1. Glad to know that the test on the DVD is for my specific computer hardware, and that the current OS on that machine does not matter.This was not clear to me and I could not find an answer on Apple's help pages. And that explains why the hardware test isn't on the 10.5 upgrade DVD.
Thanks BD and Niel.
Dr. Rock

Can not run the test form using servlet (patch 8)

Installed 9I AS 1.0.2.2.1 and forms patch 8 on Windows 2000.
Configured the Forms Listener Servlet by following the white paper "Forms 6i Patch 8: Oracle Forms Listener Servlet for Deployment of Forms on the Internet".
I can get the page titled Forms 6i Listener Servlet using URL: http://myserver/servlet/oracle.forms.servlet.ListenerServlet.
However, I can not run the test form using the servlet by the url:
http://myserver/servlet/f60servlet?config=servlet. In the formsweb.cfg file I also added a section
[servlet]
serverURL=/servlet/oracle.forms/servlet.ListenerServlet
No meaningful error message. At first it seems very slow, and then shows the "The page can not be displayed" page.
Please advise.
Thanks.

u must add "Script Alias ifcgi60 "$ORACLE_HOME/forms60/cgi" in confirguration.

Can i run the free version of Adobe Acrobat DC across more than one of my laptops during this test run

Can i run the free version of Adobe Acrobat DC across more than one of my laptops during this test run

You mean the trial version? Yes, you can run it on as many devices you want. Each device will have its own 30-day trial limit.

Most users can not use TEST PANELS or run EXE built vi's?

On any fresh install of NI-DAQ, the System Administrator and the first user logged in afterwards can use the Test Panels... button in the "Measurement & Automation Explorer" as well as run the Standalone programs made by Application Builder (LabView 7.1)...all other users can not use the Test Panels... or run the Built-vi's that shows up with plenty of error code 21, "an external subroutine required for execution could not be found", and it seems to be vi's that are called by the vi's we use, like one step away. I have set the permissions to all the related files to FULL as well as hacked the registry's HKeyLocalMachine->Software->NI... as well as the CurrentControlSet->...->DAQCARD... all to full control.
Since the Administrator and the frist user can run the programs it is definitely not a case of missing software, but just permission rights. Please help to get the other users productive as well!

Hi, they have not got the application builder license here...

Can't run hardware test because probing never completes

I start the hardware test, it tells me probing will take about a minute and I can't do any tests until it completes, the blue bar goes about 95% of the way and stops, I go away and come back half an hour later and nothing has moved. Has anybody seen anything like this?
Is it because I have an Acer monitor and a no-name three-button optical mouse? Does the Audioworks speaker system plugged into the headphone jack have anything to do with it?
I wanted to do a hardware test because a particular application gave me kernel panics. Apple support walked me through erasing the disk, reinstalling the OS, and recovering my settings and data from Time Machine. I did not reinstall the offending application and I have not had any more kernel panics. But I still can't run a hardware test.

I have a workaround, but not a real solution. I unplugged the no-name mouse and then started the hardware test from the applications install DVD. Probing completed, the hardware test completed, and the final report was "no trouble found."
It's now Apple's problem, because a hardware test should either report trouble or no trouble, but should never hang, no matter what hardware is connected.

Our hp officejet 6500 e710 printer will not print. it is networked, i can print a test page

We have a Officejet 6500 E710 printer connected to a HP Pavilion dv7 latop via our home network. Windows 7 op sytsem.
I can not get documents to print from the laptop.
The network connection appears to be good.
I can prnt a test page from the laptop and get it to scan but can not get it tp print any document or web pages.
It shows Status "Error printing"
Any advice would be appreciated.
Thanks

Hello wombat61,
Please download and run the HP Print and Scan Doctor using the below link, which should resolve the issue ..
www.hp.com/go/tools
Regards,
Jabzi
Help the community by marking this post .
Was your question answered? Mark it as an Accepted Solution!
See a great post? Give it a Kudos!
I work for HP
Regards,
Jabzi
Give Kudos to say "thanks" by clicking on the "thumps Up icon" .
Click "Accept as Solution" if it solved your problem, so others can find it.
Although I am an HP employee, I am speaking for myself and not for HP.

HT3053 Can I run my MacBook Pro Late 2008 without battery forever? Is it bad in long term or anything? Does it make the system less stable?

Can I run my MacBook Pro Late 2008 without battery forever? Is it bad in long term or anything? Does it make the system less stable?
My battery got swollen (and I unfortunately noticed it very late and might have be running with it for months, which potentially explains all the crashes everyday and the trackpad not working anymore, the Apple test also says I have a bar of ram broken...) and I had to remove it because the back pannel did not close anymore... Can I still use my MBP normally forever that way? I was planning on buying a new mac anyway but maybe waiting for the next iMac upgrade in the year... Should I wait?

Other than the system shutting down instantly if you have a power outage, whcih could corrupt the OS. Nothing else bad will happen.

Can't run the cluster example

          I would appreciate if someone can explanation my long list of questions regarding
          the deployment of EJB in cluster environment.
          I can't run the cluster EJB example( Teller/Account) in a cluster(contains two
          server2). I always get
          java.rmi.RemoteException: Unable to
          resolve examples.cluster.ejb.Account
          Home. Resolved: 'examples.cluster.ejb'
          Unresolved:'AccountHome'
          Following is my setup:
          Machine A: exampleServer:7001 (admin server)
          Machine A: testServer1:8001 (Managed server)
          Machine B: testServer1_B:8001(Managed server)
          MyCluster : testServer1, testServer1_B
          Test Client:
          java examples.cluster.ejb.Client "t3://Machine A:8001"
          ======================
          Q1: Should I use 8001 or 7001 as cluster port number?
          Q2: What will happen when we click "apply" after select/unselect the server in
          the "target", "server" tab?
          Q3: And what will happen if we click deploy/undeploy check box in "configuration"
          tab of EJB item?
          Q4: I check the JNDI tree from all above three servers can't find out JNDI tree
          doesn't reflect the change I did in Q2 or Q3.
          Q5: What is the right way to deploy EJB components, should we select both cluster
          and server in the "target" tab?
          Q6: I got this message from one of the server when I try to undeploy/deploy ejb
          object.
          "examples.cluster.ejb.TellerHome_EO in the jndi tree is non clusterable
          and you have tried to bind more
          once? How could I make it clusterable?
          Q7: Undeploy and EJB doesn't work and sometime I still get " JNDI name in use"
          from the server.
          How could I fix it.
          Thanks


First I can tell you that the ports have to be the same, be on the the
          same network , i.e. Telnet into the other m/c. Next which you probably
          have done is the properties files. Per-cluster ...
          >>>>>>>>>>>>>>>>>> Original Message <<<<<<<<<<<<<<<<<<
          On 6/7/01, 6:59:48 AM, "James Hsu" <[email protected]> wrote regarding
          Can't run the cluster example:
          > I would appreciate if someone can explanation my long list of
          questions regarding
          > the deployment of EJB in cluster environment.
          > I can't run the cluster EJB example( Teller/Account) in a
          cluster(contains two
          > server2). I always get
          > java.rmi.RemoteException: Unable to
          > resolve examples.cluster.ejb.Account
          > Home. Resolved: 'examples.cluster.ejb'
          > Unresolved:'AccountHome'
          > Following is my setup:
          > Machine A: exampleServer:7001 (admin server)
          > Machine A: testServer1:8001 (Managed server)
          > Machine B: testServer1_B:8001(Managed server)
          > MyCluster : testServer1, testServer1_B
          > Test Client:
          > java examples.cluster.ejb.Client "t3://Machine A:8001"
          > ======================
          > Q1: Should I use 8001 or 7001 as cluster port number?
          > Q2: What will happen when we click "apply" after select/unselect the
          server in
          > the "target", "server" tab?
          > Q3: And what will happen if we click deploy/undeploy check box in
          "configuration"
          > tab of EJB item?
          > Q4: I check the JNDI tree from all above three servers can't find out
          JNDI tree
          > doesn't reflect the change I did in Q2 or Q3.
          > Q5: What is the right way to deploy EJB components, should we select
          both cluster
          > and server in the "target" tab?
          > Q6: I got this message from one of the server when I try to
          undeploy/deploy ejb
          > object.
          > "examples.cluster.ejb.TellerHome_EO in the jndi tree is non
          clusterable
          > and you have tried to bind more
          > once? How could I make it clusterable?
          > Q7: Undeploy and EJB doesn't work and sometime I still get " JNDI
          name in use"
          > from the server.
          > How could I fix it.
          > Thanks
          [att1.html]

Can you run multiple Excel Services Applications against a single Web Application?

I have been struggling with this one for a while now, hopefully someone can help me understand what I am missing...
I have a single SharePoint Farm. This farm runs multiple Web Applications & the Service Applications.
1. SharePoint Only Server with Multiple Site Collections (http://sharepoint.com/...)
2. MS Project Server with Multiple Site Collections (http://pwa.com/...)
3. My services applications all exist on the same farm.
I was under the impression, and believe that I validated this through testing and from this site (http://blogs.office.com/2009/11/16/excel-services-in-sharepoint-2010-administration-improvements),
that you can only run a single Excel Services Application against each unique Web Application. In essence, I can run one Excel Services Application against the SharePoint Only Server, and another Excel Services Application against the MS Project
Server... However, I can NOT run multiple Excel Services Applications against the different Site Collections within the MS Project Server becuase it is only aware of its "default" Excel Service Application.
ie. I can NOT do the following: ExcelServiceApp1 for
http://pwa.com/SiteA & ExcelServiceApp2 for
http://pwa.com/SiteB
Is that correct?
If that is not correct, then I must be missing a way to specify a different Excel Service App for each Project Web App Site.
Some other solutions that I think may work, but would really appreciate if someone could validate:
- Create multiple Project Server Service Applications for each instance of PWA/Excel Service? (but wouldn't this still have to use one of the two WebApplications and cause the same limitation?)
- Create a new Web Applciation for each PWA/Excel Service? (ie.
http://pwasite1.com;
http://pwasite2.com; http://pwasite3.com, etc.)
Thoughts/suggestions are very greatly appreciated!!!

Hello Trpy2k
I have not done what you are doing and I assume that you are using project server 2010. However, you answer lives in PowerShell.
The New-WebServiceProxy show that you can create a new proxy by spacing a URL and not a web application. The default proxy from the web application is directing to the default excel service. If you need another excel service, you must specify another
proxy and this may do it for you.
Also, don't forget the Secure State service and that each excel report will need this configured, that is with the assumption that the other excel service requires different authentication.
PS. This question may get a better answer in the SharePoint forums.
Cheers!
Michael Wharton, MVP, MBA, PMP, MCT, MCTS, MCSD, MCSE+I, MCDBA
Website http://www.WhartonComputer.com
Blog http://MyProjectExpert.com contains my field notes and SQL queries

Can't run multiple instances on same page!

Hi,
Since I got no response on the shadowbox forums after 2 weeks, I thought it's worth to post it here and hope someone can help me out.
Note: This is also related on non-joomla pages. I've tested it on plain html as well (by Dreamweaver) and get the same issue.
The following issue was posted by me on the shadowbox forums:
I was wondering if the following is possible.
I've tried almost everything where I can think of, but no luck.
Searched many forums and googled a lot, but without success.
I got feeling that I'm so close and missing some simple solution.
So I'm stuck here, I'm not able to figure it out.
This is what I want to achieve:
My website is running on Joomla 1.5. And I'm using a Shadowbox extension.
In an article I've put multiple SWF movies, like previews acting like buttons.
So when clicking on a SWF button/movie, Shadowbox opens and plays a related FLV movie.
To achieve this part I've followed the instructions at this site under FAQ > first paragraph.
So far so good...
Now the ugly thing is when putting multiple swf buttons on a single page, after clicking a random button Shadowbox always displays the same flv movie. I did some altering with ID's and such but had no luck.
Even try to alter with the Shadowbox options and variables, flashVars and such (at this site under Options and Usage) but that worked out for me.
The strange thing is when placing the buttons, let's say in an article belonging to a section and category and make the articles paginated, after clicking the swf button the related flv plays. Browsing to the next page and clicking the button, the related flv will play also. This is the way it should be. Unfortunately it doesn't work when multiple buttons are displayed on the frontpage or an single article regardless whether they belong to sections and categories or not.
Even when a single code is placed in a single article and display 2 or more articles containg a different swf and a different related flv link only the last added flv plays with every random swf button/movie.
This the code I'm using for each swf (actionscript behavior):
FIRST INSTANCE SWF=====================================
on (release) {
getURL("javascript:openShadowbox
('http://test.cquence-multimedia.nl/images/cqmm_test.flv','flv','title')");
SECOND INSTANCE SWF=====================================
on (release) {
getURL("javascript:openShadowbox
('http://test.cquence-multimedia.nl/images/WizardFinal_1.flv','flv','title')");
================================================
This is the code I'm using in the article (2 instances on a single page):
=======================================================

<script src="Scripts/swfobject_modified.js" type="text/javascript"></script>
<script src="Scripts/AC_RunActiveContent.js" type="text/javascript"></script>
<object id="FlashID" classid="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000" width="150" height="50" data="images/default_swf_button.swf">
<param name="movie" value="images/default_swf_button.swf" />
<param name="quality" value="high" />
<param name="wmode" value="opaque" />
<param name="swfversion" value="9.0.45.0" /> 
<param name="expressinstall" value="Scripts/expressInstall.swf" />  
<object width="150" height="50" data="images/default_swf_button.swf" type="application/x-shockwave-flash">

<param name="quality" value="high" />
<param name="wmode" value="opaque" />
<param name="swfversion" value="9.0.45.0" />
<param name="expressinstall" value="Scripts/expressInstall.swf" /> 
<div>
<h4>Content on this page requires a newer version of Adobe Flash Player.</h4>
<p><a href="http://www.adobe.com/go/getflashplayer"><img src="http://www.adobe.com/images/shared/download_buttons/get_flash_player.gif" border="0" alt="Get Adobe Flash player" width="112" height="33" /></a></p>
</div>

</object>

</object>
</p>
<script type="text/javascript">
swfobject.registerObject("FlashID");
</script>
<script type="text/javascript">
function openShadowbox(content, player, title, width, height, options){
Shadowbox.open({
content:"http://test.cquence-multimedia.nl/images/cqmm_test.flv",
player:"flv",
title:"SHADOWBOX FLASHBUTTON TEST FLV",
width:"800px",
height:"600px",
</script>

<script src="Scripts/swfobject_modified.js" type="text/javascript"></script>
<script src="Scripts/AC_RunActiveContent.js" type="text/javascript"></script>
<object id="FlashID1" classid="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000" width="150" height="50" data="images/default_swf_button2.swf">
<param name="movie" value="images/default_swf_button2.swf" />
<param name="quality" value="high" />
<param name="wmode" value="opaque" />
<param name="swfversion" value="9.0.45.0" /> 
<param name="expressinstall" value="Scripts/expressInstall.swf" />  
<object width="150" height="50" data="images/default_swf_button2.swf" type="application/x-shockwave-flash">

<param name="quality" value="high" />
<param name="wmode" value="opaque" />
<param name="swfversion" value="9.0.45.0" />
<param name="expressinstall" value="Scripts/expressInstall.swf" /> 
<div>
<h4>Content on this page requires a newer version of Adobe Flash Player.</h4>
<a href="http://www.adobe.com/go/getflashplayer"><img src="http://www.adobe.com/images/shared/download_buttons/get_flash_player.gif" border="0" alt="Get Adobe Flash player" width="112" height="33" /></a>
</div>

</object>

</object>
<script type="text/javascript">
swfobject.registerObject("FlashID1");
</script>
<script type="text/javascript">
function openShadowbox (content, player, title, width, height, options){
Shadowbox.open({
content:"http://test.cquence-multimedia.nl/images/WizardFinal_1.flv",
player:"flv",
title:"SHADOWBOX FLASHBUTTON TEST BRIAN",
width:"800px",
height:"600px",
</script>
=======================================================
This is the link to the page in question:
http://test.cquence-multimedia.nl/index.php?option=com_content&view=article&id=9&Itemid=13
Please, any suggestions would be great!
Thanks in advance.
Best Regards,
John.

Sorry...I still don't get it. What is it about Windows FUS that keeps iTunes from running running the process twice? It can run many other non-Apple windows apps in multiple user sessions (commercial apps, open source apps, audio/video apps, networked apps). I can even run two different virtual machines at the same time under two different user sessions.
Why can iTunesHelper.exe run twice but iTunes.exe cannot? Why can I run Safari at the same time? Quicktime Player runs fine under multiple user sessions.
Blaming it on Windows and/or FUS sounds like FUD. Can anyone give a valid technical reason? Semaphores? Mutexes? An admission (and explanation) that the Windows version is purposely crippled?

Can't run Test-CsLisCivicAddress

Similar Messages

Maybe you are looking for