Can't run the indicPreferences.js in InDesign CS6 and hyphenation issues with Malayalam

I am not able to run the indicPreferences.js in InDesign CS6 in Mac OS X 10.10.2.
But all the apple script is working fine, Also there is a red cross mark is seen next to the script icon (image attached)
I am trying to use Malayalm Unicode fonts with InDesign and it is giving me lot of hyphenation issues, How can I make the text flow with proper spacing in between characters? is this normal when I use justify all?
Suggest me a quick fix please.

Which hyphenation dictionary are you using? I have found that in many languages, there is enough divergence in spelling that some words simply cannot be hyphenated, because the hyphenation dictionary expects one spelling and Every Single Speaker of X Language On The Planet expects another.
Also, sometimes InDesign has a hard time recognizing a term typed with combining marks as the same word with precomposed characters.
Lastly: Have you used the settings in the Hyphenation pane to try to force different breaks? I think that the default settings are not appropriate for Malayalam, and I would myself only hyphenate long words. So the default settings are, I think, to hyphenate no fewer than two letters away from a word boundary, in any word with more than five letters. I'd bump that up to words of no fewer than, perhaps, seven to nine letters? And increase the letters-from-word-boundary to 3 or 4. That way only long words get hyphenated.

Similar Messages

Can't reinstall the free trial of InDesign CS6 even though it told me to

I downloaded the free trial of InDesign CS6 and when I opened it, it told me to uninstall it and reinstall. I uninstalled it but now can't find how to reinstall, any suggestions?

CS Cleaner Tool for installation problems | CCM, CS6, CS5.5, CS5, CS4, CS3
http://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html

HT3204 I was in the process of restoring my ipad and an issue with itunes came up and itunes closed. Now my computer doesn't recognize the ipad as anything so I can't complete the restore process.

I was in the process of restoring my ipad and an issue came up with itunes and it had to close. I reopened itunes but now my computer doesn't recognize the ipad as anything plugged in to my computer. I am unable to complete the restore process.

Hi kimbo934,
Welcome to the Support Communities!
The article below may be able to help you with this.
Click on the link to see more details and screenshots.
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
I hope this information helps ....
Happy Holidays!
- Judy

Anyone had problems running the debug version of InDesign CS6 Server

Hi Folks,
A number of developers at my firm have tried using the debug version of InDesign Server CS6, but find they cannot run it with the following error:
ERROR [server] Adobe InDesign Server is not properly licensed and will now quit.
In each case the installer ran correctly and a valid serial number for debug CS6 used (from the Adobe Partners site).
We have no problems with the release version of CS6 server, or CS5/CS5.5 debug/release versions.
Has anyone suffered the same problem?
Thanks,
Andrew

Hi Ian,
I had a look and although there was one post suggesting a similar problem, the answer didn't work or was not applicable for the debug version. However I do have an answer - I used a release serial number and it now starts up normally!
Thanks for your reply.
Andrew

InDesign CS6 and relinking resources with ILinkFacade

I've been trying to relink InDesign document links but rather unsuccessfully. I did read that ILinkFacade should be the way to go but the documentation is somewhat poor. I did find some SDK examples but they didn't have too much code about ILinkFacade. I ended up reading comments from ILinkFacade source code.
I came up with the following piece of code that happens in Respond function inherited from CResponder:
Utils< Facade::ILinkFacade > LinkFacade;
InterfacePtr< IDocumentSignalData > DocumentSignalData( signalMgr, UseDefaultIID() );
IDatabase* pDocumentDatabase = GetDataBase( DocumentSignalData );
UIDList LinksUIDList( pDocumentDatabase ); // Does this actually get the links from a document?
UIDRef linkref = LinksUIDList.GetRef( 0 ); // If the above does get the list of links, does this get the UIDRef to the first link in the list?
URI ImageURI = "D:/test.jpg";
ErrorCode status = LinkFacade->RelinkResource( linkref, ImageURI, kSuppressUI );
Compiles nicely but every time I run it I just manage to crash InDesign.
Anyone have any good tips to this? I'm quite unsure especially about using the UIDList.

I made some minor modifications to my code and used QueryLinks to get all the links in a QueryResult.
// signalMgr is received in Respond(...) inherited from CResponder.
InterfacePtr< IDocumentSignalData > pDocumentSignalData( signalMgr, UseDefaultIID() );
InterfacePtr< ILinkManager > pLinkManager( pDocumentSignalData->GetDocument(), UseDefaultIID() );
ILinkManager::QueryResults results;
LinkQuery query;
pLinkManager->QueryLinks( query, kIDLinkClientID, results );
Utils< Facade::ILinkFacade > LinkFacade;
// All the links should now be in results and we can go through all of them.
for( unsigned int i = 0; i < results.size(); i++ )
    UIDRef LinkUIDRef( GetDataBase( pDocumentSignalData ), results.at( i ) );
    // Check if the link is relinkable.
    if( LinkFacade->CanRelinkResource( LinkUIDRef ) )
The UIDs can be used (I tried deleting links via pLinkManager->DeleteLink) so they seem to be fetched correctly now. But right now LinkFacade->CanRelinkResource always tells me that none of my links are relinkable. I tried to test my UIDRefs with if( LinkUIDRef ) but it seemed to always evaluate to false. This probably has something to do with why CanRelinkResource always evaluates to false because it used UIDRef instead of UID. So I am probably doing something wrong with UIDRefs here but I can't understand what. Anyone got any good advice?

Can I run the admin and managed servers as different users?

in unix, is it possible to run my admin and manged servers as different users with
7.1?

As long as users are in admin group, there could be different users starting different
servers.
"Frank" <[email protected]> wrote:
>
"Erik Johnson" <[email protected]> wrote:
Hi, Frank.
Could you be a little more specific about what it is you want to do?
Thanks.
erikUh, I'm on unix, I have Weblogic 7.0 service pack4. I have 1 managed
server and
I have one admin server...Can I run the admin server as user 'hithere'
and run
the managed server as user, 'byethere'......
"Frank" <[email protected]> wrote:
in unix, is it possible to run my admin and manged servers as different
users with
7.1?

I am attempting to install the latest update for Photoshop CS6 and it failes. Message U44M1P7

I am attempting to install the latest update for Photoshop CS6 and it failes with a message U44M1P7. I have a one year cloud subscription for this that expires in 2014.

http://helpx.adobe.com/photoshop/kb/photoshop-cs6-updates-dont-install.html

Can I run the indesign on my stationary desktop and my lap-top? or do I have to buy two licens ?

one or two licens ?
can i run the same licens on my statonary computer and my lap-top?

Hi NilsHartmann,
You can run InDesign on your Desktop and your lap-top for your personal use with one license.
As per EULA you can install and activate the software on two machines, however you should not use it on both the machines at the same time.
Regards,
Anand

I just got InDesign CS6 and am running it on an iMac and I know the license is good for two computers which will come in very handy for me. How do I set it up to access it from my second iMac?

I just got InDesign CS6 and am running it on an iMac and I know the license is good for two computers which will come in very handy for me. How do I set it up to access it from my second iMac?

I just had an afterthought, Peter, if I could bother you further; if the downstairs iMac that I want to access it from is in my wife's name and not mine (even though I'll be the one using it on her computer) does that affect anything or can I simply load the software straight into her computer without any complications?

HT1349 I can not run the scanner in my main user, but only the second user and the same thing with updating apps! Why is this happening???

I can not run the scanner in my main user, but only the second user and the same thing with updating apps! Why is this happening???

Welcome to the Apple Community.
Enter the details of her second account at system preferences> mail, contacts & calendars.

I can't get my Windows 7 pc to recognise my old LG VN251 phone via USB.   The verison software upgrade assistant runs and my phone is up to date.   I do get a window that pops up that says I can either run the bootstrap or look at the files on the phone,

I can't get my Windows 7 pc to recognise my old LG VN251 phone via USB.   The verison software upgrade assistant runs and my phone is up to date.   I do get a window that pops up that says I can either run the bootstrap or look at the files on the phone, but I cannot see any photos.   Thoughts?

We want to make sure we move your pictures to your computer schpee! Do you have a memory card on your phone? If your pictures are not on your http://vz.to/1OvJVey memory card we would want to move them. After you move them than try http://www.verizonwireless.com/support/knowledge-base-45147/ to move them to your computer. Keep us posted.   AmberF_VZW Follow us on Twitter @VZWSupport If my response answered your question please click the "Correct Answer" button under my response. This ensures others can benefit from our conversation. Thanks in advance for your help with this!!

How can I run the report for different input values at the same time?

Reports version: Report Builder 6.0.8.13.1
Oracle version: Oracle8i Enterprise Edition Release 8.1.7.0.0
I want to run the same report for different input parameter values and spool each o/p to different file and ftp to a server. For this, as a first step, I am spooling different input values in to a file, reading those values through a loop and calling the report for that input values. Each report run/execution is taking 15 minutes. Total report execution is taking approximately 4 hours (assuming 16 different input values) to complete. So I have to wait 4 hours to see ALL outputs.
I would like to run the report parallel for ALL the input values and I should be able to see the ALL outputs with in 15 or 16 minutes.
In my shell script, I added & symbol at the end of the report call to start/run the job in the background. Due to this the control passed to the next step after the report call. At this place I have an ftp command to send the output file to a different server and it is giving error some thing like o/p file is not available/created yet". This is due to the fact that report writer is NOT yet completely started/initiated or it is NOT completed the spooling.
How can I run the report at the same time for all the input values and save the time?
Thanks in advance.
Kishore.

Increase the number of server engines running right now it seems there is only one engine running ,increase it to 4 or 6
and then atleast 4 or 6 reports will run simultaneously.
For FTPing the output add to your sript to check whether it is locked and if not then only try to ftp .
Also for more better functionality read the document (chapter 15 ) for 10g reports for its new fuinctionality.
http://download.oracle.com/docs/cd/B14099_17/bi.1012/b14048/toc.htm
Thanks
Subodh

Can't run the cluster example

          I would appreciate if someone can explanation my long list of questions regarding
          the deployment of EJB in cluster environment.
          I can't run the cluster EJB example( Teller/Account) in a cluster(contains two
          server2). I always get
          java.rmi.RemoteException: Unable to
          resolve examples.cluster.ejb.Account
          Home. Resolved: 'examples.cluster.ejb'
          Unresolved:'AccountHome'
          Following is my setup:
          Machine A: exampleServer:7001 (admin server)
          Machine A: testServer1:8001 (Managed server)
          Machine B: testServer1_B:8001(Managed server)
          MyCluster : testServer1, testServer1_B
          Test Client:
          java examples.cluster.ejb.Client "t3://Machine A:8001"
          ======================
          Q1: Should I use 8001 or 7001 as cluster port number?
          Q2: What will happen when we click "apply" after select/unselect the server in
          the "target", "server" tab?
          Q3: And what will happen if we click deploy/undeploy check box in "configuration"
          tab of EJB item?
          Q4: I check the JNDI tree from all above three servers can't find out JNDI tree
          doesn't reflect the change I did in Q2 or Q3.
          Q5: What is the right way to deploy EJB components, should we select both cluster
          and server in the "target" tab?
          Q6: I got this message from one of the server when I try to undeploy/deploy ejb
          object.
          "examples.cluster.ejb.TellerHome_EO in the jndi tree is non clusterable
          and you have tried to bind more
          once? How could I make it clusterable?
          Q7: Undeploy and EJB doesn't work and sometime I still get " JNDI name in use"
          from the server.
          How could I fix it.
          Thanks


First I can tell you that the ports have to be the same, be on the the
          same network , i.e. Telnet into the other m/c. Next which you probably
          have done is the properties files. Per-cluster ...
          >>>>>>>>>>>>>>>>>> Original Message <<<<<<<<<<<<<<<<<<
          On 6/7/01, 6:59:48 AM, "James Hsu" <[email protected]> wrote regarding
          Can't run the cluster example:
          > I would appreciate if someone can explanation my long list of
          questions regarding
          > the deployment of EJB in cluster environment.
          > I can't run the cluster EJB example( Teller/Account) in a
          cluster(contains two
          > server2). I always get
          > java.rmi.RemoteException: Unable to
          > resolve examples.cluster.ejb.Account
          > Home. Resolved: 'examples.cluster.ejb'
          > Unresolved:'AccountHome'
          > Following is my setup:
          > Machine A: exampleServer:7001 (admin server)
          > Machine A: testServer1:8001 (Managed server)
          > Machine B: testServer1_B:8001(Managed server)
          > MyCluster : testServer1, testServer1_B
          > Test Client:
          > java examples.cluster.ejb.Client "t3://Machine A:8001"
          > ======================
          > Q1: Should I use 8001 or 7001 as cluster port number?
          > Q2: What will happen when we click "apply" after select/unselect the
          server in
          > the "target", "server" tab?
          > Q3: And what will happen if we click deploy/undeploy check box in
          "configuration"
          > tab of EJB item?
          > Q4: I check the JNDI tree from all above three servers can't find out
          JNDI tree
          > doesn't reflect the change I did in Q2 or Q3.
          > Q5: What is the right way to deploy EJB components, should we select
          both cluster
          > and server in the "target" tab?
          > Q6: I got this message from one of the server when I try to
          undeploy/deploy ejb
          > object.
          > "examples.cluster.ejb.TellerHome_EO in the jndi tree is non
          clusterable
          > and you have tried to bind more
          > once? How could I make it clusterable?
          > Q7: Undeploy and EJB doesn't work and sometime I still get " JNDI
          name in use"
          > from the server.
          > How could I fix it.
          > Thanks
          [att1.html]

Can I run the currency translation for multiple years at the same time?

Dear Friends,
I set up currency translation on our BPC NW 7.0 system and it is working fine ONLY if I run it for any one year at a time. But if I select multiple years in the data package (FX Restatment) selection it only calculates for the first year in that selection.
say if I run the data package for years: 2009, 2010, 2011, 2012, it only performs currency translation for the year 2009.
Can I run the currency translation for multiple years at the same time ?
Note: The year is determined from the YEAR property of the "Time" dimension
appreciate any inputs,
thanks

You can run currency translation for multiple years.
I think the problem it is actually related to how you are sending the parameter to currency translation script.
Just review the script logic log and you will see with what parameters was called currency translation FXTrans.
My expectation is that actually the script is called just with first year and that's the problem.
Log of script logic you can find it into:
C:\BPC|DATA\Webfolder\YourAppset\YourApplication\Private Publications\Users used to run logic\Temp
Regards
Sorin Radulescu

After upgrading to itunes 7.3.1.3 I can't run the backup to dics anymore.

After upgradeing to itunes 7.3.1.3.1 I can not run the backup any more. Also the CD burning runs very slow.
The DVD burner run ok with other software.
After it checks for file to be backed up it kept ejecting the blank DVD and asking for a blank disc.
I have even replaced the DVD drive with drive from another computer.I also reinstalled ITUNES once-- It ran as a repair during the install.

I have used this same DVD Burner to backup my list from within iTunes before. I did this back in June just after I purchase 30 songs. I think I was running version 7.1 or 7.2 when the DVD backup worked. If not sopport then why does their diagnostics say DVD/CD Diagnostics. Even so I have the same problem on my other PC with a CD Burner. I think Apple support sound a little like Microsoft. I once had a problem with Windows NT and had to call MS support 5 times before they said their software had a defect and issued a patch.

Can't run the indicPreferences.js in InDesign CS6 and hyphenation issues with Malayalam

Similar Messages

Maybe you are looking for