Can't run this version of Aperture with Snow Leopord?!?!

I decided to do a clean install of Snow Leopard on my MacBook Pro. It went fine and I then tried to re-install Aperture. That went fine. However, when I try and run it, I get a message telling me:
"You can't use this version of the application Aperture with this version of Mac OS X. You have Aperture 2.1"
I tried re-installing Aperture, but no joy. This obviously can't be the case. Any idea what is going ok?
Thanks.

You said you deleted Aperture from the Applications folder. Maybe the Aperture file that's causing the problem didn't get deleted. You could try zapping it with AppZapper.
download a trial here:
http://appzapper.com/
Not sure if there's a SL version.
But before you do that, look at this thread, and make sure you don't have the same problem.
http://discussions.apple.com/thread.jspa?threadID=2179417&tstart=0
Note: that poster was starting from 1.5.6 not 2.1
DLS

Similar Messages

  • Mail will not work, it says "you can"t use this version of mail with this version of mac os x. mail version 4.5 help please

    Mail icon displays the following "you can't use this version of mail with this version of mac os x"
    Mail version 4.5
    It was ok on friday, my daughter used the mac to update her ipod to ios6, would this cause a problem?
    All my updates are up to date.
    Any help, thanks.

    !! WARNING !!
    about the September 2012
    "Security Update 2012-004"
    If you've got "Mail.app" in a folder OTHER THAN the root "Applications" folder,
    MOVE "MAIL.APP" TO THE APPLICATIONS FOLDER
    **BEFORE** INSTALLING THE "004" UPDATE!!
    Because *IF* you use OSX's integrated Software Update app from the Apple menu to do the "004" updating, and *IF* your Mail.app is NOT in the Applications folder, then buddy, you've got some sitdown fixit time ahead of ya and/or some internet tie-up time downloading the "004" update file itself.
    Been through it all, already.  In fact, just got done getting my Mail back up & running. And I tried everything short of attempting to unpacking my "Mail.pkg" receipt file using... whatever... even Pacifist couldn't get it out. So that fixit "Plan D" died quick. And I'm not savvy enough to use Terminal commands to do "Plan E," so that SUDO stuff was my brick wall.
    So I compressed my entire "Mail" subdirectory that contain all my emails, for safekeeping during the required surgery, or whatever would work, leaving the original Mail directory where it was. In case something bad happened in all my fixit whatevers, the one thing I *didn't* want to cross paths with was a hosed Library -> Mail folder. Then I'd be pssd. But I can wipe out that ZIP now 'cause all's well now. After 6 hrs of downloading thru a mobile broadband hotspot running at only 14KB/sec speed due to my having gone over my T-Mobile hotspot plan's bandwidth amount (throttled-down after reaching the limit, tho not cut off completely. Kinda nice, but it's a huge speed drop).
    I tried moving the two Mail.app versions around, compressing them & then trashing the original so they wouldn't be recognized, blabla, even booted my Mac in Safe Mode & reinstalled the "MacOSX 10.6.8 (Snow Leopard) Update Combo.dmg" update file, which in the past has fixed many problems. But after restarting, not this one.
    Like a dummy who ignored knowing better, I had my Mail.app in a folder other than the Applications folder, with only an alias to that being in the Applications folder. NOT GOOD ENOUGH. The updater don't see that as nuthin special or useful.
    So if you've got, like I've got, "old" icons for Mail.app (v4.5) in your Finder toolbar & in your Dock that all point to "Mail.app v4.5" in whatever folder you've got that in, other than in the Applications folder (where Apple apparently REQUIRES that it be located, and ONLY there, at least for OSX updating purposes), then after you download & autorun that "004" updater using Software Update, NONE of your pre-existing Mail icons will work. And MOST aggravatingly, **NOR** will your brand-new "Mail.app v4.6" work that came out of the "004" updating installation.  So basically, your Mail.app's... all of 'em.... are hosed. But only if you run the "004" update without your "Mail.app v4.5" being located in your Applications folder and ONLY in your Applications folder. And duplicates of Mail.app, scattered around your HDD??  Always a problem with many Apple apps.... The Apple software engineers apparently like 'em to be in the Applications folder, and in ONLY there, and ONLY the latest version, and ONLY 1 single copy of each on your entire HDD. They just don't seem to stress that enough, it appears. Kind of an oversight for them to not emphasize that, IMO...
    My recommendation for this particular September 2012 "004" update:
    If you run Software Update, and if you see the "Security Update 2012-004" listed as available for download, UNCHECKMARK IT.  DO NOT DOWNLOAD IT USING SOFTWARE UPDATE !  Instead, download the actual update file itself.
    Same thing, only a different way of doing it. Most importantly, you'll be skipping the auto-installation that Software Update performs.
    AND you'll have that update file on your HDD for future fixits, should a nasty "unfixable" problem come up.
    First, #1. Do a filename search for "Mail" (Option-Command-Spacebar). Scroll down to where the "Apps" are located in the list under the "Kind" column heading. First, find your Mail.app that's v4.5. Get that bugger into your Applications folder if it's not already there. Next, Trash all other "Mail.app" apps you see in that same list that you may have elsewhere on your HDD.
    #2. Go here: https://support.apple.com/kb/DL1586
    And download the actual "004" DMG update file: "SecUpd2012-004.dmg"
    And of course, it's a biggie.... 270MB... so watching grass grow may be involved here if you've got a slow connection (go to a MacDonalds & do it, like I shoulda done).
    3. After downloading, I'd recommend closing down all apps, emptying the Trash, and restarting.
    Then, after restarting, run Disk Utility's "Repair Disk Permissions."
    Then, doublecheck that the Mail.app version 4.5 is in your Applications folder.
    THEN fire up & install "SecUpd2012-004.dmg."
    Reboot.
    After the reboot, your Mail.app version 4.5 in the Applications folder will have become Mail.app version 4.6 in the Applications folder, and all will be well again.
    And you can dump that zipped-up "Username -> Library -> Mail" folder then, too.
    Happy Mac'in!
    Kevin Kendall
    Macbook 7,1
    (Apple's very last all-white Macbook model)
    2.4GHz - 256GB Crucial SSD - 8GB Crucial RAM
    OS 10.6.8 Build 10K549 + Win 7 Ultimate thru VMWare Fusion v5.0.1

  • WHEN I OPEN IDVD IT SAYS YOU CAN'T USE THIS VERSION OF IDVD WITH THIS VERSION OF MAC OXS. I AM RUNNING 10.6.6 WHAT SHOULD I DO ?

    WHEN I OPEN IDVD IT SAYS YOU CANNOT USE THIS VERSION OF IDVD WITH THIS VERSION OF MAC OXS. WHAT DO I NEED TO DO TO GET IDVD WORKING?

    First off, please don't use all caps!  It's considered to be yelling.
    I need to know more about your system and software.
    How old is your Mac Pro? what Mac OS version came with it when it was new? What version of iDVD are you trying to use?

  • I can't open mail/ message "can't use this version of mail with Mac OS X  this occurred after security update

    I can't open mail/ message "can't use this version of Mail wigh this version of Mac OS X" this change occurred after a security update. tried to open in application with same responce.

    Mac OS X v10.6: "You can't use this version of Mail…" alert after installing Security Update 2012-004

  • Can't use this version of mail with this version of osx

    can't open mail since downloading security update OSX 10.6.8

    Mac OS X v10.6: "You can't use this version of Mail…" alert after installing Security Update 2012-004:
    http://support.apple.com/kb/TS4424?viewlocale=en_US&locale=en_US
    Fellow user Grant Bennet-Alder offers this solution:
    Some users have reported this problem if the Mail Application has been moved out of the top-level /Applications folder, or duplicated in another location.
    When the Security Update is done, the old version of Mail is disabled.
    The solution has been to:
    1) make certain Mail is in the /Applications folder
    2) There is no other copy anywhere else.
    3) Once steps 1 and 2 have been done, Manually download and re-apply the Security Update (2012-004) by hand.
    Security Update 2012-004 (Snow Leopard)
    If the Mail.app has been LOST, it can be re-installed by applying the 10.6.8 version 1.1 combo update. But this update is quite large and it is usually not necessary:
    Mac OS X 10.6.8 Update Combo v1.1

  • Can't use this version of mail with this version of OSX (Mail 4.0)(OS 10.6)

    After a mail crash I decided to delete Mail and re-install the Mail App from the Snow Leopard install disk. After it had downloaded from the disk, upon trying to launch I get this message. "You have Mail version 4.0 (1075/1076). It can’t be used on Mac OS X Version 10.6.1 (Build 10B504). For more information, click the Help button." The help button doesn't help. Does anyone know where I can download the most recent Mail to be used with 10.6.1?
    Thanks for any help.

    Does anyone know where I can download the most recent Mail to be used with 10.6.1?
    You can't do that. You need to remember that you cannot download those applications, regardless of the version of Mac OS X that you're running. Deleting Mail was the first big mistake you made here.
    If you want to solve your problem, you need to download and install the 10.6.1 Combo Update again; that will make Mail compatible with 10.6.1. In the future, don't delete things unless you know what you're doing and how you're going to get it back. Applications are rarely the problem, so deleting it will do you no good 99.999% of the time.

  • "You can't use this version of Mail with this version of Mac OSX

    "You have Mail version 4.2 (1078/1081). It can't be used on Mac OSX Version 10.6.4 ( Build 10F569)."
    I attempt to open Mil on my new MacBook Pro disk and I get this message I did a software update and still the same. Any suggestions. I have re-loaded the Mail app from the CD and this is still happening.

    Insert your Snow Leopard Installer Disc, open the Optional Installs folder and double-click on the Optional Install.mpkg file. You will find a list of applications you can reinstall including Mail. Reinstall Mail then run the 10.6.4 Combo Updater that you can download from support.apple.com/downloads/.

  • You can't use this version of Mail with this version of Mac OS X

    Help!
    I installed MAC OS X 10.8.3 and after reboot I can no longer use Mail.

    It would appear there was a problem installing the new Mail. I suggest you download and install the OS X Mountain Lion Update v10.8.3 (Combo). See if that doesn't fix the problem for you.
    Before doing the above drag your old Mail into the Trash, but don't empty the Trash. If the above fixes things for you then you can empty the Trash.
    I also recommend that before you do the above you first do this:
    Repair the Hard Drive and Permissions - Lion/Mountain Lion
    Boot to the Recovery HD:
    Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Repair
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported then click on the Repair Permissions button. When the process is completed, then quit DU and return to the main menu. Select Restart from the Apple menu.

  • I have updated to OS X 10.9 and now can't open Aperture, message reads You can't use this version of the application "Aperture" with this version of OS X. You have "Aperture" 3.2.3... all i need to know is how to get Aperture to work again..help !

    I have just updated to OS X 10.9 and now find that I can't open Aperture to access photos etc, message reads : You can't use this version of the application "Aperture" with this version of OS X. You have "Aperture" 3.2.3... whichj is not a lot of help, i have limited technical ability and all i need to know is how to get Aperture to work again...help !

    Software Update?

  • I have just bought a 2011 iMac (2.5 ghz, 4gb) and logic express 9, and when i installed logic and tried to run it i had a message saying 'you can't use this version of the application logic express with this version of Mac OS X. How do i sort this out!?

    I have just bought a 2011 iMac (2.5 ghz, 4gb) and logic express 9, and when i installed logic and tried to run it i had a message saying 'you can't use this version of the application logic express with this version of Mac OS X. How do i sort this out!? It is very frustrating as the main reason i have bought  a mac is to use logic! Any help would be great as i am a complete novice when it comes to Macs!

    You're probably on OS X Lion?
    I had the same problem as you. I used Software Update to update Logic Express to the latest version, and then it ran without any problems.

  • II  downloaded the OS X version 10.9 and my iPhoto version 9.2.3 will n.ot open.  I get a message that I can't use this version of the application I photo with this version of OSX.  What do I do now and how do I get the photos out of the old version?

    I downloaded the OS X version 10.9 and my Iphoto version 9.2.3 will not open.  I get a message that I can't use this version of the application I photo with this version of OS X.  How do I upgrade to a i photo that will run on 10.9.  Do I purchase a new program or can I do just an download?

    Check the "Purchases" page in the Mac App Store and see if there is a more recent version there already waiting for you.

  • I just ran the updates for my MacBook Pro and now my iphoto will not open.  It says "You can't use this version of the application "iphoto" with this version of os x.  You have "iphoto 9.2.3

    I just ran my updates for my MacBook Pro and now my iphoto won't open. I get a pop up that say's You can't use this version of the applicaton IPhoto with this version of os x.  You have iphoto 9.2.3.

    This screenshot shows which previous versions of iPhoto are compatible with Mavericks.  It also indicates which versions qualify for a free upgrade to iPhoto 9.5.1 and which require a purchase:
    Note 1:  every day more users are reporting problems with iPhoto 8.1.2 so I've included it in the non compatible category.
    Note 2:  If your previous version of iPhoto was iPhoto 7 (08) or earlier you'll need to download and run the iPhoto Library Upgrader 1.1 application on the library before opening it with iPhoto 9.5.1.
    OT

  • You can't use this version of the application "logic pro" with this version of os x

    After installing all of Logic Studio (i.e. install dvd, audio content 1-3, jam packs 1-3), my laptop concludes that everything is installed successfully, however, when going to open to Logic, error icon appears and says:
    'you can't use this version of the application "logic pro" with this version of os x'

    Thank you! I found that just after I entered the question. I reinstalled everything two times, updated software, but was still having issues. But, I specifically updated the 9.1.8 (which was supposedly included in my standard software update). Guess I needed to give it some extra attention and affection.
    P.S. - Why do I feel like the more I upgrade versions of OS X, the worse off I am getting or am? Isn't it supposed to be opposite...isn't it supposed to make things better...come on, mac...where you at? mt. lion or mavericks. I'm downloading Snow Leopard to make some programs run. (um, yeah).

  • When I try to open iPhoto (9.2.1) it says 'You can't use this version of the application iPhoto with this version of OS X.  All my photos are on there.  Please help.  Thank you

    When I try to open iPhoto (9.2.1) it says 'You can't use this version of the application iPhoto with this version of OS X.  All my photos are on there.  Please help.  Thank you.

    Did you upgrade to a new MacOS X version? Then you need to update iPhoto as well.
    Only iPhoto 9.6 is compatible with MacOS X 10.10 Yosemite.  Update from the Mac App Store.
    Backup your iPhoto library, if you do not have a current backup.
    Launch the App Store, click the "Store" menu, and sign in with your current AppleID.
    Check the "Updates" tab of the App Store for an iPhoto update and run the update.
    When you laugh iPhoto after the update, it will warn you, that the library needs upgrading, That may take a while.
    Just in case that you see a warning, that the update is not possible because of an error message: "This update is not available for this Apple ID either because it was bought by a different user or the item was refunded or cancelled."
    Uninstall iPhoto by deleting it from the Applications folder, but do not empty the Trash, so you can put iPhoto back, if need be.
    Launch the App Store, click the "Store" menu, and sign in with your current AppleID.
    Open the main page "Featured" of the App Store and search for iPhoto.
    If iPhoto is listed as "Free", click the "Free" button to buy it with your current AppleID.
    If it is not showing as free, there is no help but contacting the App Store Support to sort out the AppleID. Use this link: http://www.apple.com/support/mac/app-store/contact/

  • You can't use this version of the application "iPhoto" with this version of OS X. just opened this Mac comp having regrets..  uploaded this version because it was offered.. and can't work with pics???? what do I do to resolve this????

    HELP.. I just opened this Mac Pro..  having second thoughts of the gift.. got it to work with pics .. and now it tells me .. 
    "You can’t use this version of the application “iPhoto” with this version of OS X."  "you have iphoto 9.3.2"
    I hav no idea how to use this Machine..

    If you're running Mavericks and have iPhoto 9.3.2 you can upgrade to iPhoto 9.5.1 at the App Store for free.
    OT

Maybe you are looking for

  • How To Capture A Column Value In A Report And Store It In A Variable?

    Portal Version: 3.0.6.6.5 RDBMS Versjion: 8.1.7.0.0 OS/Vers. Where Portal is Installed:: SunOS 5.8 I have a Portal report where I added a checkbox for each row of data that is being displayed. The user can select checkbox for as many rows as he/she w

  • Problem emailing pictures via iPhoto

    when I try to email pictures via iPhoto, they just move to normal mail and I can't choose the nice templates promised in iPhoto 11. I do have the latest iPhot version

  • Drag and drop files to replace older only?

    I often find have folders which share some of the files.  If I drag and drop one folder onto the other I get a prompt for duplicates to keep both, replace or skip.  But how can I ensure that if I select replace Finder will only replace the file if th

  • Join Tables in Connect BY

    Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production Hi, I have the following Example. i am getting the require output if i hardcode the values in START WITH CLAUSE but instead of hard coading the values how can i join the tab

  • 10.4.3 and PCI USB Cards

    I have been using a Macally 5 USB port PCI card with my PM G5. It has never given me problems connecting to USB peripherals, but like many others, it did not allow the computer to sleep properly. When 10.4.3 came out, I noticed things changed a littl