Can't run updates on computer?

I had a volume that could not be repaired on my HD, so I did an archive and install of OSX. I fixed the majority of my problems, but now I can't look for updates on my computer, Safari won't run, Itunes won't run, can't install the 10.4 upgrade from the install disk.
How do I go about re-installing these items?

Kitty:
Safari may not work after an Archive and Install explains your difficulty.
Now, how do you download those updates? I don't suppose you have any other browser like Firefox or Camino on your computer, do you? If you don't you have the option mentioned in the article I linked earlier, i.e. installing a later version OS. Otherwise you can either get a friend to download one of those browsers and install it, or go to the Apple Store and ask them to download it for you and burn it to disk.
Please do post back with further questions or comments.
Good luck.
cornelius

Similar Messages

  • I Have a silver w/Mirror doors dual 867 running OSX10.2. I try to install OS9.2.1 I get "THIS PROGRAM CAN NOT RUN ON YOUR COMPUTER" Message I need to be able to run Classic.

    I have a powermac Silver with mirror doors 867 dual processors running OSX 10.2 no problem there but I need to run Classic but when I try to install OS 9.2.1 I get a "THIS PROGRAM CAN NOT RUN ON YOUR COMPUTER" message.

    Your G4 (MDD) dual 867MHz model Mac requires the model-specific version of OS 9.2.2 which originally came with that machine. It can not use any other version of OS 9.
    The model-specific version of OS 9.2.2 can be installed using the original disk set which came with that machine; that disk set boots to OS X 10.2, but the installer on it can install OS 9.2.2 (Classic) as an option.
    There is no stand-alone install disk (such as a retail, i.e. white-label, CD) which can be used to install Classic on that model G4.

  • Why can't I update my computer in the app store ?????

    Why can't I update my computer in the app store ?????

    using app store to update it to OS X Mavericks when I typed my apple id and the password it doesn't update it says there is an error connection but the wifi is all right

  • My itouch will not back up in itunes so I can not run updates

    When I connect my iotouch and try to run a back up before updating it runs forever and will not backup. I can transfer purchases and was able to sync apps but I can not run update because I can not back up.

    Hopefully you aren't doing this with a PC running Windows 2000 since 2000 is not supported.
    Try deleting the existing backup and manually creating a new backup.
    Go to iTunes > Preferences and under the Devices tab, select and delete the existing backup.
    Then right-click on your iPod Touch under Devices in the iTunes source list and at the menu window that appears, select Back Up to create a new backup.

  • Why can't I update the computer clock?  I'm using a Mac Pro and Mountain Lion 10.8.2

    I am unable to update the computer clock.  Tried Sys Preferences--just get the spinning basketball.?

    Select  ▹ System Preferences ▹ Language & Text ▹ Region ▹ Region: your country. Test.

  • Can't run updater 8.0.2 on Dreamweaver CS3 install

    I have that FTP user name and password problem where it's
    lost every time you re-start the program. Reading this forum I
    found that I needed to use the updater 8.0.2. That downloaded fine
    and when I tried to run it I got the following message:
    The upgrade patch cannot be installed by the windows
    installer service because the program to be upgraded may be
    missing, or the upgrade patch may update a different version of the
    program. Verify that the program to be upgraded exists on your
    computer and that you have the correct upgrade patch.
    I double checked I downloaded the English version of 8.0.2
    and I have the English version
    My disk is an upgrade disk which I've also had in the drive
    during the update.
    I tried totally uninstalling dreamweaver and then installing
    and doing the update again.
    Regardless I get this error, I also get the error with 8.0.1
    updater
    Any suggestions?

    Your subject line says you're trying to run this on DW CS3.
    It's already
    built in to CS3. The 8.02 updater was for DW 8.
    Nancy Gill
    Adobe Community Expert
    Author: Dreamweaver 8 e-book for the DMX Zone
    Co-Author: Dreamweaver MX: Instant Troubleshooter (August,
    2003)
    Technical Editor: Dreamweaver CS3: The Missing Manual,
    DMX 2004: The Complete Reference, DMX 2004: A Beginner's
    Guide
    Mastering Macromedia Contribute
    Technical Reviewer: Dynamic Dreamweaver MX/DMX: Advanced PHP
    Web Development
    "derkdiggler" <[email protected]> wrote in
    message
    news:ffip5h$s3t$[email protected]..
    >I have that FTP user name and password problem where it's
    lost every time
    >you
    > re-start the program. Reading this forum I found that I
    needed to use the
    > updater 8.0.2. That downloaded fine and when I tried to
    run it I got the
    > following message:
    >
    > The upgrade patch cannot be installed by the windows
    installer service
    > because
    > the program to be upgraded may be missing, or the
    upgrade patch may update
    > a
    > different version of the program. Verify that the
    program to be upgraded
    > exists
    > on your computer and that you have the correct upgrade
    patch.
    >
    > I double checked I downloaded the English version of
    8.0.2 and I have the
    > English version
    > My disk is an upgrade disk which I've also had in the
    drive during the
    > update.
    > I tried totally uninstalling dreamweaver and then
    installing and doing the
    > update again.
    >
    > Regardless I get this error, I also get the error with
    8.0.1 updater
    >
    > Any suggestions?
    >
    >

  • Can't run updates

    I get this when trying to update:
    [davek@arch64 ~]$ su
    Password:
    [root@arch64 davek]# pacman -Syu
    :: Synchronizing package databases...
    core                      33.4K  149.6K/s 00:00:00 [#####################] 100%
    extra                    412.8K  523.6K/s 00:00:01 [#####################] 100%
    community                371.2K  506.7K/s 00:00:01 [#####################] 100%
    archlinuxfr               24.9K   39.4K/s 00:00:01 [#####################] 100%
    :: The following packages should be upgraded first :
        pacman
    :: Do you want to cancel the current operation
    :: and upgrade these packages now? [Y/n]
    resolving dependencies...
    looking for inter-conflicts...
    error: failed to prepare transaction (could not satisfy dependencies)
    :: shaman: requires pacman<3.3
    [root@arch64 davek]#
    Because of shaman I can't update pacman?
    Do I have to unintstall shaman so # pacman -Syu  can work?

    Allan wrote:Shaman currently does not work with pacman-3.3 but an updated version of shaman should be released soon.  If you want to upgrade now, you need to uninstall shaman first.
    No hurry, I'll wait a few days and try again.
    Thank you
    Last edited by vinoman2 (2009-08-08 02:08:16)

  • Won't save login info and can't run updater

    Help! Dreamweaver 8 won't save the username and password for
    my sites and when I tried to run the 8.0.2 updater to resolve the
    issue, it says, "The contents of this file cannot be unpaced. The
    executable you are attempting to run has been corrupted. Please
    obtain another copy of the file, verify its integrity, and try
    again."
    I've downloaded the file several times from adobe with the
    same results - help!

    Clear your cache in your browser.
    "akmetcalf" <[email protected]> wrote in
    message
    news:er5814$ns6$[email protected]..
    > Help! Dreamweaver 8 won't save the username and password
    for my sites and
    > when
    > I tried to run the 8.0.2 updater to resolve the issue,
    it says, "The
    > contents
    > of this file cannot be unpaced. The executable you are
    attempting to run
    > has
    > been corrupted. Please obtain another copy of the file,
    verify its
    > integrity,
    > and try again."
    >
    > I've downloaded the file several times from adobe with
    the same results -
    > help!
    >

  • Recently updated my iphone 4s software. now it won't sync w/ itunes, says i need updated itunes. i updated itunes... now it says that my desktop software is old and can't run new itunes. Yet, i cant update my computer either. PLEASE HELP!!!! UGHH

    recently updated my iphone 4s software. now it won't sync w/ itunes, says i need updated itunes. i updated itunes... now it says that my desktop software is old and can't run new itunes. Yet, i cant update my computer either. PLEASE HELP!!!! UGHH

    Why can't you update your computer operating system ("desktop software")? What software would that be?

  • Why can't I update my Flash player?

    When playing Pogo, I got an alert saying Flash needed updating. I pushed the appropriate button, and was then presented with a page full of confusing instructions. I couldn't  understand most of the terms used and I wonder if Adobe can tell me exactly which Flash version is on my computer, then why can't Adobe update my computer without having me determing what my NEW computer has or does and/or what all the terms refer to.
    I have a daughter that works in IT department of her employer and she was unsuccessful in updating.
    Must I pay someone just to update my Flash player?

    Hi vcormier,
    Which browser are you using?
    You might want to refer the KB Doc: http://helpx.adobe.com/flash-player/kb/troubleshoot-games-video-audio-flash.html
    Regards,
    Rave

  • An update tries to run, but an error message stating "The update could not be installed. Please make sure there are no other copies of Firefox running on your computer, and then restart Firefox to try again." I can't open Firefox

    I click on Firefox and it says that Firefox is installing your updates and will start in a few minutes. Then I get "The update could not be installed. Please make sure there are no other copies of Firefox running on your computer, and then restart Firefox to try again." this cycle never ends. Do I need to deinstall Firefox and re-install? If I do that, do i lose all of my bookmarks, etc?

    See http://kb.mozillazine.org/Software_Update (Software Update not working properly)
    Remove the files in the updates and updates\0 folder:
    *C:\Documents and Settings\&lt;user&gt;\Local Settings\Application Data\Mozilla\Firefox\Mozilla Firefox\updates
    *(%USERPROFILE%\Local Settings\Application Data\Mozilla\Firefox\Mozilla Firefox\updates)
    *C:\Program Files\Mozilla Firefox\updates
    *Do a clean reinstall and download a fresh Firefox copy from http://www.mozilla.com/firefox/all.html and save the file to the desktop.
    *Uninstall your current Firefox version and remove the Firefox program folder before installing that copy of the Firefox installer. Do not remove personal data when uninstalling.
    *It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
    You can skip the step to create a new profile, that is not necessary for this issue.
    See http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

  • I have Itunes on my computer, however its an older version and it says I can no longer update it. My problem is im considering buying an Iphone 5, but if it is running on a new version what will happen when I sync it to my itunes account?

    I have Itunes on my computer, however its an older version and it says I can no longer update it. My problem is im considering buying an Iphone 5, but if it is running on a new version what will happen when I sync it to my itunes account?

    aimzpoo wrote:
    I have Itunes on my computer, however its an older version and it says I can no longer update it.
    Highly unlikely that it says any such thing.
    Try telling us exactly what version of iTunes is installed and what if any messages appears when trying to update it.
    What Operating System is the computer running?

  • Can I run 2 different updates of FCPX on the same computer?

    How can I run 2 versions of FCPX (update 10.1.1 and the original FCPX) on the same computer?
    I'm working on a team using FCPX. Recently, my computer updated FCPX to 10.1.1 (I'm assuming bc I have a newer computer & OS). The others on the team have FCPX, the earlier version.
    Because we have projects edited on both version of FCP and we need to be able to transfer projects from one computer to another, I need to be using the earlier version of FCPX. However, I also need to be able to edit the 10-15 projects we've started in 10.1.1. So, I'm looking to somehow run the 2 different versions of FCPX on a single computer.
    How could I best accomplish this - thru different users? partitioning the drive? Any suggestions??

    theconster wrote:
    WOW! Can it be that simple?
    You also want to make sure that if 10.1 sees your 10.0.9 projects and events that you don't let it update them.
    Russ

  • I have an older computer and can no longer update. After the latest Apple update I can no longer access my e-mail on my mac. I can view it on my iphone and on icloud. Is there a solution to this problem?

    I have an older computer and can no longer update. After the latest Apple update I can no longer access my e-mail on my mac. I can view it on my iphone and on icloud. Is there a solution to this problem?

    Apple changed MobileMe to iCloud and then restricted iCloud to 10.7 users only unfortunately
    If your machine is a 64 bit processor Intel Mac you can upgrade to 10.7 for $29, however a lot of your 10.5/10.6/Rosetta based software could cease to function, especially third party hardware drivers for printers, fax machines, all-in-ones, scanners etc.
    http://roaringapps.com/apps:table
    Also depending how old the machine is, if it can accept 4GB of RAM (preferred), older video card, may not run 10.7 very well or stable.
    My advice is to keep at 10.6.8, get a web based email service that's plaform/hardware neutral, forward your iPhone emails there. Gmail/Yahoo Mail for instance.
    When your ready for new hardware and all new software, then buy a new machine.
    If your going to go to 10.7 on your present hardware, I advise you clone 10.6.8 to a external drive first, that way you can c boot off the 10.6 disk erase the drive completely (necessary to remove hidden Lion Recovery Partition) and option boot off the 10.6.8 clone and reverse clone.
    http://www.bombich.com/get_ready_for_lion.html

  • Can no longer update computer (network error)

    So I may or may not have been on a questionable site looking for some app add on's for my ipad and I may or may not have gotten a disease.
    Since being on these unnamed sites Im unable to update my computer in anyway, or connect to the app store. I get an error that says "Software Update can't check for updates because of a network problem" but I go into my network settings and everything is working normally. I can get online, get on the itunes store and everything that requires the network and it works great. I just cant get into the software update, or the app store.
    Any ideas being I cant try and reinstall OSX  Lion because I cant connect to the app store to install it
    20" iMac (late 2006)
    OSX 10.7.5
    2.16 GHz Intel Core 2 Duo
    4GB SDRam

    If you have more than one user account, these instructions must be carried out as an administrator.
    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    Select
    /var/log ▹ install.log
    from the hierarchical list on the left. If you don't see that list, select
    View ▹ Show Log List
    from the menu bar. Then select the messages from the last installation or update attempt, starting from the time when you initiated it. If you're not sure when that was, start over and note the time. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
    If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
    When posting a log extract, be selective. Don't post more than is requested.
    Please do not indiscriminately dump thousands of lines from the log into this discussion.
    Important: Some private information, such as your name, may appear in the log. Edit it out by search-and-replace in a text editor before posting.

Maybe you are looking for

  • How can I use this Apple ID?

    I want to use this Apple ID.

  • Help!! ID app blocked.

    Password and security Forget and blocked Please send information to.  [email protected] thank you

  • BPM Worklist 11g

    Hi All, Is there a way you can customize the BPM 11g worklist ? We want to remove the worklist default options that appear at the bottom namely ---- "Comment" and "Attachment" section (we dont need it). How can these be removed ? Also, we want tobe a

  • SES integration with Oracle WMS

    1) How do we dispatch the events from the SES database (SDR, EDGE SCHEMA) To the EBS WMS Module, such that when an item in an order is scanned using RFID, the Order should automatically be ship confirmed in WMS? Regards Balaji [email protected]

  • How to diagnose NTP server problem during boot-up?

    We're having a problem on our campus network where Macs aren't able to use the time.apple.com NTP server to correct the time during boot-up. Once the user logs in, open the Date & Time pref pane causes the time to be corrected. I've noticed this prob