Can't run Xbox live and computer at the same time

I purchased a E3000 router for Christmas so we can run our new laptop, desktop, son's ipod, and the xbox live. At first, the only problem we had was that if a video or large page was downloading on the internet, xbox live would glinch and run very slow. Now, if someone's on xbox live and someone else turns on a computer, it boots them off xbox live. I don't know what the problem is. Any suggestions? Thank you.

Is the Xbox connected to the wireless network?
Try changing some advanced wireless settings on the router.
Open the setup page of the router and go to Wireless tab. Click on Advanced wireless settings sub tab. Change the Beacon Interval to 75, RTS and fragmentation threshold to 2304. Save the settings.
Click on Setup tab and change the MTU size to 1365. Save the settings and power cycle the router.
See if that helps you.

Similar Messages

  • Can you run Boot Camp and Fusion at the same time?

    Hi,
    I had boot camp installed on my mac pro and loved it. I decided to get greedy and install Fusion using the boot camp partition. The Fusion install went ok but then Microsoft started to get fussy. Every time I would do something on Fusion it would ask me to "Re-activate Windows" when I logged into boot camp. Maybe if I saw Fusion fully working I wouldn't want to run boot camp any more but I think I want to have the option to run either. Right now I only have 1 gig real memory on my mac pro and Fusion seems a little slow compared to native boot camp. Can I run both boot camp and fusion without having to buy two native copies of Windows XP pro? I don't want a "sensible" answer, I want an answer that takes into account how Microsoft treats this re-activation situation.
    I guess Leopard might make this all obsolete, but until then .....
    ... Flash Gordon

    You need to make sure to install VMware Tools into your virtual machine (while booted into Windows via Fusion). Once you do this you shouldn't have to continually activate Windows when going back and forth from Boot Camp to Fusion. I've seen this discussed over on the VMware Fusion discussion boards, so you may want to look there for more details.
    Also, if Windows starts telling you it's been activated too many times, you can call Microsoft and they'll give you an alternate activation key. The phone number is listed on the Windows error screen. I had to do it and they were very accommodating. I just told them I was running Windows in a virtual machine, and there were almost no questions asked.
    You don't need to buy 2 copies of Windows to run both Boot Camp and VMFusion.

  • Error Running Oracle Apps and Discoverer at the same time

    Hello,
    We are having trouble running Oracle Apps and Discoverer at the same time on certain user's machines. Here are the specifics:
    The user opens Oracle Apps in Internet Explorer. The user then opens Discoverer in another Internet Explorer windows and receives the following error: Runtime Error! Program: C:\Program Files\Internet Explorer\iexplore.exe abnormal program termination
    As a work around, I installed Firefox on those user's machines. These users run Oracle Apps in Internet Explorer and run Discoverer in FireFox. This has solved the problem in 99% of the cases. However, there is one user who is having FireFox using Discoverer freeze when running Oracle Apps in Internet Explorer.
    Can anyone provide any insight on how I can solve these conflict issues so users can run Oracle Apps and Discoverer at the same time?
    Thanks in advance for your help,
    Carlos

    Hi Michael,
    I agree with you completely. It is reccommended to run 10g on a separate physical server unless you have sufficient resources to run on the same server (which even most large clients do not) Even then, I would recommend a separate server.
    I should have put my comment in context :-)
    a.) I was only stating that it was possible
    and
    b.) whether 10g is installed on the same physical server or separate should not affect the client browser crashing issue that was posted.
    I do have an install with EBS11i and Discoverer 10g on the same physical server and it works fine (this is sandbox/ TEST). Most of my large customers have 10g installed on multiple physical servers due to load balancing (capacity).
    I do work for Oracle. I try to help out on the forum when I can, but it is hit or miss :-(
    I would be glad to discuss anything privately.
    As for the issue at hand, I can reproduce the problem and here is what is occuring.
    I have EBS 11i configured with Jiniator 1.3.24
    I have Discoverer 10g configured with Sun Java plugin 1.4.2_06
    1. If you launch EBS 11i apps and a form with MS IE, then the browser launches the form using Jiniator JRE 1.3.xx (whatever you have configured in AutoConfig for EBS11i)
    2. Next, the user navigates to EBS 11i SSWA and launches a Discoverer workbook.
    What occurs is a child IEXPLORE.exe process is spawned from the parent IEXPLORE.exe process and Discoveer Plus is launched. The parent iexplore.exe process will be attached to the Jiniator JVM. Now if Discoverer is configured with
    a.) Sun Java Plugin or
    b.)a version of Jinitiator that is a different version from what EBS 11i is configured with
    then you may get this conflict.
    It really is an MS IE/JRE conflict with Jinitiator and Sun Java Plugi and the way the broswers attaches to the JVM (IMHO) as this behaviour could be reproduced with other non-oracle java applets.
    You can workaround the situation by:
    a. configure EBS11i and Discoverer to use the same version of Jiniator 1.3.xx
    b. educate the users to open one MS IE browser to connect to EBS11i and then open a second MS IE browser to login to EBS11i SSWA or Discoverer 10g Plus directly to launch workbooks. They need to to this by clicking on the icon and not using File >> New browser. Clicking on the icon will spawn a new parent iexplore.exe process that can attach to a second/different JVM. File >> New Window will spawan a child of the parent.
    c. As you did use two browser versions. MS IE for EBS11 connection and FireFox for Disocverer 10g connection.
    I would choose optoin b, so that you can use Sun Java Plugin with Discoverer.
    Open to any comments. I hope that helps you workaround the problem. The ideal solution is to have EBS 11i use/cerified with the 1.4 or 1.5 JRE. In poking around, I see there is a related post to this on one of Oracle's EBS 11i Product Managers Blog.
    See:
    http://blogs.oracle.com/schan/2006/04/18#a23

  • Can we use Badi BBP_SOURCING_BADI and BBP_DETERMINE_LOGSYS at the same time

    Hi everyone,
    We need you help. We are working in SRM 7 and ECC 6 EhP 4. We have a doubt. Can we use badis BBP_SOURCING_BADI and BBP_DETERMINE_LOGSYS at the same time in a classic scenario?
    We want to create the contract in ECC, and then we want to return the SC in SoCo in order to create the PO with the SC and the contract.
    We activate both, but the SC is not returned in SoCo.
    Thanks,
    Ivá

    Hi Ivan
    You can use both badi to change srm standard behavior.
    but one shopping cart item and it can have only one follow on document either Contract or Purchase order.
    i presumed that you want to use same sc for two purposes to create both SC and PO but it is not possible.
    for example
    shopping cart item has follow on document created  as a contract But you need to create a another shopping cart to create a Purchase order  w.r.t that contract .
    Once follow on documents are created sourcing flag will be removed .- rule
    BBP_SOURCING_BADI - you can write your custom logic and make way to cockpit .
    BBP_DETERMINE_LOGSYS - Determine your logical system.
    Muthuraman

  • How do i delete email from my iPhone,ipad and computer at the same time?

    How do i delete email from my iPhone,ipad and computer at the same time?

    Go to http://support.google.com/mail/bin/answer.py?hl=en&answer=77702. It tells you how to set up gmail on iPhone.  Then go to gmail settings then "accounts and imports" and add your AT&T POP email account  to import mail from AT&T to gmail

  • Running Reports 6i and 9i at the same time

    I was wondering what the issues were with running Reports 6i and 9i at the same time. We are planning on up grading at a client, and I heard that there are some problems with doing this. I was thinking that installing them in different ORACLE_HOME's would help keep problems to a minimum. At home I have Reports 6i and 9i running, and I have not seen any problems.

    We suggest you install 6i and 9i at different oracle home. There are no known issue about running 6i and 9i at the same time.
    Thanks,
    -Shaun Lin

  • Can I use both cs and cc at the same time?

    Can I use both cs and cc at the same time after upgrade to Adobe Creative Cloud?

    Yep. I have CC and CS installed and they both work. However, I don't see why I should use cs.
    Regards
    Kasper

  • Can we use both INSERT and UPDATE at the same time in JDBC Receiver

    Hi All,
    I would like to know is it possible to use both INSERT and UPDATE at the same time in one interface because I have a requirement in which I have to perform both the task.
    user send the file which contains both new and old record and I need to save those in MS SQL database.
    If the record exist then use UPDATE otherwise use INSERT.
    I looked on sdn but didn't find any blog which perform both the things at the same time.
    Interface Requirement
    FILE -
    > PI -
    > JDBC(INSERT & UPDATE)
    I am thinking to use JDBC Lookup but not sure if it good to use for bulk record.
    Can somebody please suggest me something or send me the link of any blog or anything to solve this problem.
    Thanks,

    Hi ,
              If I have understood properly the scenario properly,you are not performing insert and update together. As you posted
    "If the record exist then use UPDATE otherwise use INSERT."
    Thus you are performing either an insert or an update which depends on outcome of a search if the records already exist in database or not. Obviously to search the tables you need " select * from ...  where ...." query. If your query returns some results you proceed with update since this means there are some old records already in database. If your query returns no rows  you proceed with "insert into tablename....." since there are no old records present in database.
      Now perhaps the best method to do the searching, taking a decision to insert or update, and finally insert or update operation is to be done by a stored procedure in MS SQL database.  A stored procedure is a subroutine available to applications accessing a relational database system. Here the application is PI server.   If you need further help on how to write and call stored procedure in MS SQL you can look into these links
    http://www.daniweb.com/web-development/databases/ms-sql/threads/146829
    http://www.sqlteam.com/article/stored-procedures-parameters-inserts-and-updates
    [ This part you can ignore, Since its not sure that you will face this situation
        Still you might face some problems while your scenario runs. Lets consider this scenario, after the stored procedure searches the database it found no rows. Thus you proceed with an insert operation. If your database table is being accessed by multiple applications (or users) other than yours then it is very well possible that after the search operation completed with a null result, an insert/update operation has been performed by some other application with the same primary key. Now when you are trying to insert another row with same primary key you get an error message like "duplicate entry not possible for same primary key value". Thus you need to be careful in this respect. MS SQL has a feature called "exclusive locks ". Look into these links for more details on the subject
    http://msdn.microsoft.com/en-us/library/aa213039(v=sql.80).aspx
    http://www.mssqlcity.com/Articles/Adm/SQL70Locks.htm
    http://www.faqs.org/docs/ppbook/r27479.htm
    http://msdn.microsoft.com/en-US/library/ms187373.aspx
    http://msdn.microsoft.com/en-US/library/ms173763.aspx
    http://msdn.microsoft.com/en-us/library/e7z8d5hf(v=vs.80).aspx
    http://mssqlserver.wordpress.com/2006/11/08/locks-in-sql/
    http://www.mollerus.net/tom/blog/2008/03/using_mssqls_nolock_for_faster_queries.html
        There must be other methods to avoid this problem. But the point is you need to be sure that all access to database for insert/update operations are isolated.
    regards
    Anupam

  • Can i use Firewire 800 and 400 at the same time?

    I have a HD connected to my 800 port works fine and a GL-2 camera on the 400 and final cut pro won't see the camera. Can I have 2 devices hooked up at the same time?

    Yes. But you did not say whether the camera works alone or not at all. In the latter case it could be the camera isn't compatible.
    Why reward points?(Quoted from Discussions Terms of Use.)
    The reward system helps to increase community participation. When a community member gives you (or another member) a reward for providing helpful advice or a solution to their question, your accumulated points will increase your status level within the community.
    Members may reward you with 5 points if they deem that your reply is helpful and 10 points if you post a solution to their issue. Likewise, when you mark a reply as Helpful or Solved in your own created topic, you will be awarding the respondent with the same point values.

  • Can I run Photoshop CS4 and CS5 on the same system?

    I read somewhere a zillion years ago (right?) that you coould run CS4 and CS5 on the same system but at the time I wasn't even considering it.
    Run on the same system - not ness to run at the same time
    Or should I install it on a seperate drive (bootable) and go that route. What has everyone found to work and/or not work?
    Thanks in advance for your help
    BJ

    Yes, you can run CS4 an CS5 on the same computer.  They install in different folders and don't get in each other's way.  As a matter of fact, you will find many posts in this forum from the experts recommending to keep CS4 (or an earlier version) when installing CS5.  This way, there is no danger of losing any older plug-ins you may have that aren't compatible to CS5.
    When I installed PS CS5 I had problems with my scanner driver.  Instead of spending loads of time fixing that problem, I just use PS CS4 when I want to spend an afternoon scanning things. I'm not recommending that "lazy man's" solution, but it is an example of how CS4 and CS5 can be used on the same system.

  • Can you run Edirol / Focusrite firewire interfaces at the same time?

    Hey Guys,
    I have an Edirol FA-101 but i'm just about to get a Focusrite Saffire (or maybe a Motu 8pre...haven't decided yet) and was wondering if I can run the 2 interfaces at the same time for more inputs...i know i can chain 2 of the edirol ones but i'm not sure if it works with different makes.
    Thanks

    so I actually did get myself a focusrite saffire pro 26 and it's pretty cool (apart from the focusrite computer side interface that seems to have a few bugs when you control by hardware...)
    I'm probably gonna get myself an octopre or a twintrack pro to make use of at least some of the extra digital inputs but for now I have the semi redundant Edirol FA-101 in my rack, if I can get the two working together then that's great!
    I have tried what you said and it did pair them together however it made a really awful noise when trying to record, just intense digital distortion and i'm not really sure why. I'm running it all from a macbook pro with only one FW port (that has the Saffire / Edirol / FW Hard drive / Liquid Mix running from it in that order) do you think this order is more the problem?
    Dave

  • Unable to connect router to internet and computer at the same time.

    I'm not sure where to start, but here goes. We recently got the internet set up at out new house. Of course, the only connection is downstairs and the computer is upstairs. The guys that set the internet up said we needed a wireless router and I said "Ok, cool."
    He gave us a router and a receiver and hooked them both up. (I myself know quite a bit about computers but I figured I'd let him do his job.) So we're all set up and I start playing my game and I get a "Windows has a conflict with another computer on this IP" or something like that. I figured I might as well put some security up on this thing. So I go downstairs and hit the SecureEasySetup (SES from now on) button and come back up here and follow all of the steps and it say's that it's not connected. I run back downstairs and looc for the MAC Address and notice that it was not mentioned as one of the selectable routers.
    I figured the guy didn't really install the router, just hooked the internet up into it and plugged it in, and that my reciever picked up someone else's from the neighborhood. So I go and get the CD to install and notice that I have to have the router plugged into the computer AND the internet at the same time for installation to complete. Uhh, that could be a problem. Computer upstairs + router and internet cable downstairs = no go.
    So here's my question: What can I do about that? I can't have the computer and the internet hooked up to the router at the same time.
    Thanks to everyone that replies.

    First off... don't use the setup CD.
    Configure your router by http(ing) to the IP address, log in, and configure that way.  much easier.  typically its http://192.168.1.1
    username admin
    password admin
    once you get logged in change that password and Remember it!  If you lose it, you'll have to reset to factory defaults.
    2nd
    Change your SSID. Default is "linksys"  you'd be suprised how many people leave the thing as defaults and someone else is using yoru network connection...
    3rd
    Add security WPA is better than WEP
    4th
    Now go upstairs and look for your new SSID, connect with your WPA code and you should be set.
    5th - Not needed but for info...
    If you want to go that far... you can change your DHCP set to something like 10.0.10.x but you'll have to manually change the IP of the router to that subnet as well...

  • Can I run two copies of FrameMaker at the same time?

    I am trying to learn Structured FrameMaker. Is it possible/legal/safe to start two copies of FrameMaker on my PC at the same time?
    Specifically I want to have one copy open in Structured FM to experiment and the other copy in Unstructured to take notes on what I am learning. I am trying to see if I understand the concepts by writing up a tutorial but I do not want to be locked into structured mode when do not have a template which covers all of my needs ( I am still figuring them out) and I do not yet really understand what the structured templates do.
    Will the documents save by the rules of the window they are in? What other problems will/could I encounter?
    Thanks,
    Marjorie

    Marjorie,<p>If your machine has sufficient disk space and memory, yes, you can run multiple copies of FrameMaker at once. To run the different user interfaces at the same time, you'd have to start both copies. Then, change the user interface in one copy. Since the change doesn't take affect until you restart FrameMaker, shut down that copy and start a new one (leaving the first user interface in effect in the other original copy.<p>All that said, I suspect you can do the testing you want in one copy of FrameMaker, using the Structured FrameMaker user interface. The structured user interface simply means you can work with structured documents; you can also work with unstructured documents. Each document is independently structured or unstructured; in fact, each flow is independently structured or unstructured. You might therefore consider using the structured user interface and opening one structured and one unstructured document in a single copy of FrameMaker. Or create a single document with side-by-side flows and put structured content in one and unstructured content in the other.<p>Just remember that some of the dialog boxes are slightly different in the two user interfaces. For example, the marker, anchored frame, insert table, and cross-reference dialog boxes all let you select an element tag. Since there are no element tags in an unstructured flow, the element tag text boxes in these dialog boxes shows <Unstructured>. If you are willing to ignore these differences, I recommend you do your experimentation in a single copy of FrameMaker.<p>--Lynne

  • Can not connect to printer and internet at the same time

    I use my airport to connect to the internet via the ethernet port. Internet was working fine until I connected my printer to airport via its USB port. Now the printer works fine but I can't connect to the internet using the same connection.
    I can still connect to the same server using its wireless service, but I have to keep hitting the drop down list in the menu bar to select that connection. Can't I just keep connected to the same connection without having to switch back and forth? I thought these mac products were supposed to be all user friendly... I don't have time for this.

    The only way to print and use the internet (or university network) at the same time is to do one of the following:
    (1) Connect the printer via USB to your computer.
    (2) Connect the AirPort Extreme base station (AEBS) via Ethernet to the university's network and then configure the AEBS to act as a bridge (not sharing a single IP address).
    The AEBS can NOT wirelessly join the network.

  • Streaming Live and Recording at the same time

    Currently I allow users to stream live Audio and Video and I would like to begin recording the Audio/Video at the same time.
    The only way I can figure out streaming Live and Recording is to create two NetStreams and connect with the same NetConnection and have one netstream publish "live" and the other netstream publish "record". This just doesn't seem very efficient because it would be streaming the same thing twice to the FMS.
    Is this the only way to go about this? or am I going the wrong way with this?

    What you want to do is record to FMS.  Then use NetStream.Play(filename, -1) to only play live.

Maybe you are looking for