Can't save as simple unicode

hey all,
for using data merge in indesign i need a simple unicode .csv
but numbers only exports unicode-8-utf but a only "unicode" export is not available.
thanks.

utf-8 is already "Unicode" in every sense of the word. I suppose what you want is the utf-16 variety? One way to get that would be to export as utf-8 and then open the file with a text editor like TextEdit or TextWrangler and resave as utf-16.

Similar Messages

I paid for adobe to convert a PDF to word -- now I can't save PDFs to my computer -- and I'm saving to the cloud -- HELP

I'm so depressed -- what happened to the old days when you could actually get a person in support and not have to join a forum -?
I purchased adobe acrobat to convert a PDF to a word document - that's all I wanted --
Now every damn PDF I receive or try to open can only be saved in the adobe cloud -- which I have no interest in -- and not on my computer --
How can I resolve this situation --
I can't seem to find "settings" or "support" --
Yes, I'm over 50 -- and I struggle with this maddening technology -- nothing is simple or straightforward --
I scanned a document, emailed it to myself and would like to name it and save it to my computer -- used to be a 3 minute process -- now its 30 minutes (of valuable, but wasted time later) -- and here I am -- seeking help from no one in particular! The anonymous "forum" --

No -- I installed adobe acrobat -- and now, whether I'm signed in or not -- the little disc/save icon is whited out and it can no longer be selected -- when I open a PDF I can only save it to the cloud
I am a physician, and a lot of what I look at is protected health information --- I can't be saving it in the cloud!!! I have to find a way to disable this feature -- and restore my ability to save to my hard drive ONLY --
Thanks -- but if you can tell me those things, I'll be grateful
tried to attach screen shot to show you, but it was too big .......

How can I save an image directly from my pc browser to view later on my Ipad?

Hey all,
When I attempt to download an image from Firefox on my PC directly into an iCloud Photos shared album, I get the error message: "You can't save here. Please choose another location." If I navigate to the directory where my iCloud photos are stored within Windows 7, I am able to save the file, but it isn't shared. What is the proper way to save images from my PC browser to be viewed later on my iPad? Using Dropbox, this is simple. iCloud, not so much.
Thanks!
- CB

The time should already be shown on the status bar, but you can't add the day and/or date to it - if you would like to have them then you coul leave feedback for Apple : http://www.apple.com/feedback/ipad.html
If you want to copy an attachment from an email then you can't do that directly from the Mail app. If the email is still on your provider's server then you should be able to read the email on your provider's site via a browser on your computer and save it from there directly on your computer. Otherwise you will need to copy the file from the Mail app to another app on your iPad via the 'open in' function. Do you have an app on your iPad that supports the type of file that you want to copy ? How you then copy the file to your computer will depend upon what the app that you copy it to supports - different apps have different ways of copying their content to/from a computer e.g. via the file sharing section at the bottom of the device's apps tab when connected to iTunes, via your wifi network, dropbox etc

How can I save the images to the iPhone anywhere

Hello I own Time capsule 3 tb. How can I save the images to the iPhone anywhere in Time capsule
note i used fileexplorer when Outside the home isee Outside Message " error connection failed with the error operation time out "
Thanks

Most Simple Back Up:
Drag the iPhoto Library from your Pictures Folder to another Disk. This will make a copy on that disk.
Slightly more complex: Use an app that will do incremental back ups. This is a very good way to work. The first time you run the back up the app will make a complete copy of the Library. Thereafter it will update the back up with the changes you have made. That makes subsequent back ups much faster. Many of these apps also have scheduling capabilities: So set it up and it will do the back up automatically.
Example of such apps: Chronosync - but there are many others. Search on MacUpdate or the App Store
If you want to back up the Photos only:
Export them using the File -> Export command.
This User Tip
https://discussions.apple.com/docs/DOC-4921
has details of the options in the Export dialogue.

Can you save your itunes and songs onto an external hard drive so that incase your computer crashes you will still have all your music?

Can you save your itunes and songs onto an external hard drive so that incase your computer crashes you will still have all your music?

The procedures below are for "moving" your library but as long as you don't delete it from your internal drive you are basically backing up.
iTunes: How to move your music to a new computer [or another drive] - http://support.apple.com/kb/HT4527
Simple answer: Copy your whole iTunes folder to the external drive. For subsequent backups you might want to learn about cloning and using a tool that only does incremental backups of recently changed items rather than copying all your files each time.

How can I save a set of rules to easily make a number of changes at once in Adobe Acrobat 9?

So as of right now I'm importing a huge old paper trail into PDF format via scanning. Once those files are scanned, is there a way I can set up a simple rule or save a set of processes as a rule to:
A) Add a watermark that says "DEPOSIT" and the date.
B) OCR the document
C) Remove blank scanned pages (I understand the white page is an image of a white page saved in the field).
A one-click solution would be optimal. I understand it's never that easy, but if you guys know any way to streamline it rather than going through these processes on every file (there are thousands in separate folders/days) I'd appreciate the help.

You can use a batch process to do the first two things. Removing blank pages is not possible in general, particularly for scanned pages since they will never be devoid of content. It would be possible to use JavaScript to see which pages do not have any text on them after OCR and then delete those pages, but it's not clear to me if this would be sufficient.

Can I add a simple PDF to the forms site?

I am looking to add a simple pdf - with no form content to my website and use my forms account to do so. Is that possible? I tried importing a pdf, but it needs editable content. Thank you for any help.

Hello Nancy,
1. You can embed the form in your website as a widget.
Go to "Distribute" Tab -> then look out for script under "Embed Form".
2. You can also save your Formscentral form as a PDF form and then host the PDF separately and give its link in your website.
Regards,
Anoop

Why does Illustrator on Windows 7, 64bit, take 30seconds+ to save a simple image?

This question is for Adobe Customer Service, thanks.
Why does Illustrator on Windows 7, 64bit, take 30seconds+ to save a simple image comprising of two rectangles only (screen shot below)? I set up a document like this to test the speed, since I've been having trouble saving all documents - they hang, sometimes with the 'this program is not responding' message. Switching to CC is not an option.
If it helps, I can come down to the Adobe San Francisco office with my computer. I've spent a long time trying to resolve this without success.
Btw, Photoshop CS6 saves fine.
Thanks again.

knot,
Customer Care is over there:
I believe this is one for Customer Care (tick I Still Need Help and hope for an agent available for a chat),
http://helpx.adobe.com/contact.html?product=illustrator&topic=downloading-installing-and-s etting-up
Sometimes staff appear here.
We are just the natives.
Can you create artwork without delays?
Is there a printer (driver) set up?
Are you saving to own harddisk (recommended) or somewhere else?

How can I save a facebook photo to a jpg

how can I save pictures as jpg

Hi there, and welcome to the site.
This is a simple process. Head to facebook.com, open up the photo, ctrl click (or right click) and on the popup, click 'Save image As...' or the equivalent for your browser. Enter what you want to call the picture followed by .jpg.
If you want to call the image Friend, then without quotes, enter 'Friend.jpg'.
This should work but it may vary from browser to browser.
Let me know how you get on,
Regards,
Nathan
<Edited by Host>

How can I save permanently videos ?

How can I save permanently videos that I see on the Internet ?
For example: There is a site that shows Korean videos 1 h drama. I guess this is called streaming; can I copy/save it permanently and how do I do it ?
http://www.mysoju.com/the-1st-shop-of-coffee-prince/

I guess once I download a video it is permanent, right?
Yes.
Maybe it is a silly question but I did download videos using "Save as -->archive" and of course when the video on the site was deleted, I had nothing.
That saved the web page, but that doesn't contain the actual video. That is sent by the server when needed.
I guess it's the same with video download ?
Another reason I ask is if it is so simple to just use Quick Time and it's free and it copy even without asking (all I have to do is watch) why so many ads for "capture videos ?"
Web sites often disable QuickTime's Save function, so you often need other ways to save video.

How can I save my adjusments without clicking Done?

In ACR,
How can I save my adjusments without clicking Done?

Do you mean you are wanting to save your adjustments file-by-file as you work on them without exiting ACR via Done and then having to go back into ACR from Bridge, each time? I don’t know as you can that. For Cancel to undo all adjustments for the batch of images, there can’t be something else that saves the adjustments incrementally for individual images. Of course you’re in trouble if you accidentally hit Cancel after doing a batch of edits and lose everything.
The Bridge/ACR workflow was developed many years ago and is pretty simple-minded.
An alternative would be using Lightroom that remembers each adjustment as you do it and stores it in a permanent history so the adjustments are saved immediately but also can be undone, last-to-first, at any point in the future, for a particular image.

Can't save phone numer

anyone help me please...
i can't save phone number...
at CONTACT i choose NEW CONTACT, i fill a name and number... but when i want save and i klik SAVE there is nothing happen..
i try to choose CANCEL, nothing happen too
at least i choose DISCARD and phone number didn't save..
helpp..

Do a simple reboot on the BlackBerry in this manner:
With the BlackBerry device POWERED ON, remove the battery for a minute, and then reinsert the battery to reboot. A reboot in this manner is prescirbed for most gltiches and operating system errors, and you will lose no data on the device doing this.
Now try editing and saving your contact again.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Can I SAVE one color to use for the backgrounds of many separate paragraphs?

I have changed the background color of paragraphs in different Chapters for the purpose of making the content within that paragraph stand out.
It’s easy to pick a random color in the Inspector. Open the “Text” tab, click the “More” button, Background Fills, check “Paragraph” and select a color from the available methods.
How can I SAVE one particular color to use for as many separate paragraph backgrounds that I want to make the same color?
I’m using iBooks Author ver. 1.1
As I work on the formatting, I’d like quick & easy access to those one or two special colors that I like.
Using the color wheel I can make a rough guess for each different paragraph, but its not exact.
None of the crayons or the colors in the Pallettes is the color I’m after.
Slider are a pain to try to exactly set each time.
Thanks for any help.

DarrylBurke wrote:
I don't know whether there's a better way (or whether this will work as expected), but I would try setting a boolean flag on keyPressed and reset the flag on keyReleased, for each key of interest. To compute the x / y movements, I would check the state of all flags.
dbI was thinking about your answer a few nights ago. And I was like, wait... it works! I thought, at first (as I replied before) that it wouldn't work, but I refract what I said. Its actually a very simple solution. And I apologize for questioning your solution previously. Thanks so much!
P.S. I tested it out. Works like a charm.
-Create booleans to handle each key
-Set to true on press
-Set to false on release
-Check and update in separate thread accordingly

Can't save movie captures to server...only to client

l have iMovie 11 (9.0) on a 10.6.8 client. I can't save movie clips to the server, but can save to the client. When I try to "File->Import from camera" (local iSight), then "capture", on the dialog that pops up I see "Save To:" with three shares:
1) "Mac HD" (local main partition),
2) "Data Store" (local data partition), and
3) "SERVER-USERDATA" (the main area on the server for network user data).
Share#1,2 show lots of gigs free, and I can save to these areas. (But I think I'll have a problem with network users if they log onto another machine, the clip won't be available.)
Share#3 shows 0gig free. But there is plenty of space on the server. If I try to save here, i get a dialog that says "... you may not have permissions to write to "/Network/Servers/rbserver.lan/SERVER-USERDATA/iMovieEvents.localized."
Where does it pull these sharepoints from? (SERVER-USERDATA is NOT a share of it's own, there are shares "under" it, like /server-userdata/students/...)
2 Questions:
1) any idea why it's not recognizing any free space on server share?
2) If I want to change the sharepoint that shows up for iMovie clip saving, where can I specify that? (on the client)

thanks Abhilash.
i've never configured pass-through html for the cr for enterprise viewers before but others have...please see this thread. you may wish to get this to work first before you get too far.
even if you don't use webelements and write your own embedded html & javascript, you need to activate pass-through html as that's the required feature. a simple test to see if you've got it to work is to create a formula to put on your report like the following and if the tags don't show up then your implimentation was successful.
'<DIV>this is a div</DIV>'
once that works, you can copy the syntax for the weautorefresh and create a formula based on that syntax and it should work in theory. however, the code for that function was written for the dhtml viewer for crystal reports and not the viewer for crystal reports for enterprise.
please do let us know how this part goes though.

In Word 2004 I can not save documents or quit. One suggestion is the recent security update. Any suggestins on how to fix?

In Word 2004 I can not save documents or quit. One suggestion is the recent security update. Any suggestins on how to fix?

Security Update 2012-001 Bricks Rosetta programs
I've outlined the restore proceedure here, it covers a lot of bases and explains what is going to occur so please don't be intimidated it's a LOT easier that it appears.
Take your time and comprehend the steps involved and you'll be backup up like before in short order.
Restore method.
#1 Backup your personal data off the machine.
If you get a gray screen or some other hangup upon booting, try holding the Shift key down while booting to enter Safe Mode.
Backup files off the computer (not to TimeMachine). If you don't have a external drive, get one and connect to the USB/Firewire port and simply drag and drop copy your User folder to the external drive, it will copy all your files. It's best to have two backups of your data off the machine when trying to restore.
Disconnect all drives now to prevent any mistakes from occuring.
#2 Try Restoring from a TimeMachine or hold option bootable clone
If you have TimeMachine drive, or a hold the option key bootable clone use that to erase and restore from before the Security Update occured.
Obviously if you didn't make a recent backup before the update, your going to have to skip to Step #3.
Note: A TM restore can take a awfully long time, a clone restore takes under 2 hours in most cases.
If you don't know how to restore from TM drive
http://pondini.org/OSX/Home.html
#3 Reinstall OS X 10.6 from disk
If no recent TM or bootable clone then:
Get out your 10.6 install disk and make sure it's clean and polished (very soft cloth and a bit of rubbing alcohol, no scratches) If your disk is borked, you'll have to order a new one from Apple with your serial number.
Hold c boot off the 10.6 disk (wired keyboard, internal optical drive), use Disk Utility First Aid to >Repair Disk and Permissions of your internal drive (do not format or erase!!), Quit DU and simply re-install 10.6.
Note: Simply reinstalling 10.6 version from disk (without erasing the drive) only replaces 10.6.8 with 10.6.x and bundled Apple programs, won't touch your files (backup anyway) or most programs, unless they installed a kext file into OS X itself. (only a few on average do this)
Note: If Disk Uitlity can't repair the drive, then come back to seek further assistance and make sure you have a copy of your data off the machine.
#4 Update to 10.6.8 without Security Update 2012-001
Reboot and log in, update to 10.6.8 via Software Update, but EXCLUDE THE Security Update 2012-001 by checkinig the details and unchecking the blue check box.
#5 Reinstall any non-working third party programs
When you reboot, make sure to reinstall any programs that require kext files installed into OS X, you'll know, they won't work when you launch them or hang for some reason.
If for some freakish reason you get gray screen at any time when booting (possible it might occur when you reinstall older programs), hold the shift key down while booting (Safe Mode, disables kext files) and update your installed third party software so it's compatible with 10.6.8.
https://support.apple.com/kb/TS2570
Note: For most users likley Step #3 and #4 is likley all that is needed to be done.
That's it really.
Further Reading:
Learn how to have a OS X drive restore ability using TimeMachine or cloning software
Learn how to clone your entire OS X boot here
http://www.bombich.com/get_ready_for_lion.html
TimeMachine help here
http://pondini.org/OSX/Home.html
Make copies of your original Snow Leopard
http://www.walterjessen.com/make-a-bootable-backup-snow-leopard-install-disc/
Learn how to make a bootable SL USB thumb drive
http://www.maciverse.com/install-os-x-snow-leopard-from-usb-flash-drive.html
Deciding on upgrading to Lion?
Learn which programs ARE NOT compatible/updated for Lion, Rosetta programs will not run on Lion.
http://roaringapps.com/apps:table
Unverified hacks
Note: You may see a "hack" for this issue floating around, it has had mixed results as people's software is different.
You may want to try it, but it's at your own risk. It has worked fast for some and not at all for others, hopefully over time it will work for all.
The above methods I outline are Apple approved restore methods + based upon experience here and not a quick fix, but are sure to work as Apple recommends such steps themselves.
If at any time you feel this is beyond your capability, please seek local Mac/PC professional assistance before you lose your data.
In fact my steps above are very simple, you might want to have a family member or friend perfrom the proceedure in about a hour or two.
If you don't have any backup, please maintain at least a TM drive, just hook up a new blank external drive and TM will ask you to make a backup, takes some time so let it work.
If your a bit more skilled, a option bootable clone is much superior than TM drive.
Good Luck

Can't save as simple unicode

Similar Messages

Maybe you are looking for