Can't save as template because "can't export as template"

I am trying to save a document as a template. I believe I followed all the correct steps.
I then used "save as template".
I saved to the correct folder:~/UserFolder/Library/Application Support/iWork/Pages/Templates/My templates
I keep getting this error message: The document “Blue letterhead.pages” could not be exported as “Blue letterhead.template”.
HELP!! Any thoughts??
Thanks

Ennea,
It shouldn't be that difficult. You do a File > Save as Template, give it a simple name and hit the Save button in the lower right corner of the dialog.
Try a new blank, or nearly blank, document, with a simple name like "test", and don't change any of the folder defaults. If this doesn't work, try the same thing in another User Account.
If the alternate User Account can do the Save as Template, you have a problem with a plist file or a permission, or something else is amiss in your regular account and some simple maintenance should clear it up.
Jerry

Similar Messages

Every time I try to print from word.mac it tells me that it can't save the file because I don't have permission then it closes the file. what do I do?

Everytime I try to print a doc from word.mac it tells me that it can't save the file because I don't have permission then closes the file. What do I do to change this?

If you have problems with updating or with the permissions then easiest is to download the full version and trash the currently installed version to do a clean install of the new version.
Download a new copy of the Firefox program and save the DMG file to the desktop
* Firefox 5.0.x: http://www.mozilla.com/en-US/firefox/all.html
* Trash the current Firefox application to do a clean (re-)install
* Install the new version that you have downloaded
Your profile data is stored elsewhere in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder], so you won't lose your bookmarks and other personal data.

"Can't Save the File. Can't Print the File" error in Illustrato CS3

I get the error "CAN'T SAVE THE FILE. CAN'T PRINT THE FILE". In Illustrator CS3
According to adobe this is an issue of having more that 28 spot colors, so I went to the swatch palette and pulled the fly-out menu out and told it to remove any unused swatches which took me down to 6 spot colors, but I still get the error when trying to save it to EPS format, which is the format I have to have for the ripping program for the vinyl printer in my sign shop. Saving it in AI format causes no issues.
Is there still something I am missing?
Thanks
Roger

I appreciate your comment, I see what your saying.
However...my issue is...I am making a vehicle wrap on a full size van for a radio station and it consist of pictures of a clouds for the background with two pictures of music artist that are associated with the kind of music this station plays, then there is a big round logo of the radio station that involves three spot colors (Purple, white and one of which is technically the black "K" ribbon) along with the web address of the station but it is of the same colors of the radio station logo...then there is the corporate logo that utilizes another spot color (blue)so as you can see I need the spot colors that I'm using.
So just to make sure I'm clear...I can only have 28 different individual colors, even though I have photos involved in the rendering? How can I make that work because photos obviously have more than 28 colors in them. It doesn't make sense because you can do a live trace on something in literally hundreds of colors.
Would it help if I flattened the photo work from photoshop before I move it to Illustrator? The reason I ask is because when I go to save and choose EPS the next save dialogue that comes up...down at the bottom there is two exclamations that one says something about embedding fonts, which I'm not concerned about and the other is something about there is some artwork that needs flattening.
Please bear with me here cause I am definitely a newbie!! My boss threw to the wolves on this adventure and I am learning by reading and trial and error.
Thanks
Roger

Try to save .ai file as EPS it says "Can't save the illustration. Can't print the illu

Windows 8. Adobe Illustrator CS6
I create an illustration and saved it as an .ai file. Now that I'm ready, I want to save it as an EPS file, but a window pops up saying "Can't save the illustration. Can't print the illustration." I tried saving it under older formats, doesn't work. Help!

I don't think it is a Win8 issue per se. I export to EPS from both CS5.1 and CS6 on Windows 8 64-bit. It may well be a user account issue or the CS6 installation itself.
Try creating a new user account on the Win 8 computer and try it. Only takes a few minutes with the reboot.
Mike

Can't open the page ---- because can't establish a secure connection

I recently upgraded to 10.4.8 and had no apparent problems.
There may, however, have been one resulting problem in that when I try to open one of my bookmarked locations, I get a message
"Safari can’t open the page --- because it couldn’t establish a secure connection to the server"
I tried emptying the cache and that didn't help.
Any thoughts ?

thanks

'Save As' removes preloader. Can't save as publish because elements are duplicated?

Hi,
Having some real problems with edge recently. First I'm having to work off a .html file because edge crashed and I was unable to work from previous templates.
Now my project seems to have duplicated elements as circled here and wrapped in tags.
When I click 'Preview In Browser' the file looks great, but when I actually publish the project, it looks more like this:
So to get around the problem, if I just 'Save As' a html file the project saves nicely without duplicating all the images, but for some reason removes the preloader?
Please help!
- Scott.

Ok, the two elements/images I have put into a recentangle seem to be the same thing. If I turn either of them off (turn their visability off), the blue background of my project disappears.
The only one I can choose to 'swap' is the one without the </> tag infront of it (this element with the </> tag is also not deletable).
When I click swap image, it brings up all the images involved in my project, But I don't want to swap the image - I want to keep the image, and when I publish my project, I want it to not destory my .html graphic.
I appreciate your help, and I hope I'm not being really silly and not understanding what you are saying!
What should I be swapping the image too, and how does this get rid of the elements that have the </> infront of them? - Scott.
PS: OR, is there a way to just Save As and it not delete my preloader! That would be nice!

I'm trying to add pictures to my ripped movies in my library but it keeps telling me it can't save the library because there's not enough memory. There is plenty on my hard drive, is there a setting that lets you increase the amount of memory?

I get a window popping up that says "The library iTunes file cannot be saved. There is not enough memory available.". I have 980GB free, I don't understand how to change a setting or what ever is causing it.

Hello Wyodor,
thanks for your reply on my question.
You are wright the index file is 308 KB.
And offcourse that I delete my files and documents is not an Iweb problem, but because my English is not that good, that I thougt I try to tell the whole story, and hope people can read trough the lines.
Why I didn't use Iweb to upload to the server is because the server company recommanded to use file zilla. And I am a nobody with this kind of things, so I did exactly what they tell me to do.
No, i did not make a backup of Iweb and the domain file, but reading other messages on this forum showed me that I can maybe try to make empty the cashfile (?)
and otherwise I have bad luck and have to make my website again. Offcourse I have a lot of examples from all the pages (copied from the local map to my USB stick) and my website is aprox. 15 Mb, (not so big) so it will cost me a few nigths.
But I'm still hoping on a miracle :-)
greetings Lasource

Can't save a file because of "a program error"

PSE 8 doesnt' save files with error "Could not complete your request because of a program error".
when PC is restarted PSE does save one or two files and then the error appears...
looks very ugly, such a basic fiture is not working

First thing to try is resetting the preferences by holding down
the Shft+Alt+Ctrl keys (windows) Cmd-Shift-Option (mac)
as you start the pse 8 editor and then click yes in dialog.
Some more information might help such as which OS (windows or mac)
and how much ram you have and if this has worked before or never worked and
the format your trying to save your files in.
MTSTUNER

HP Stream 7-Windows 10 doesn't boot, I can't recovery 8.1 because can't boot from USB-HELP please!!

Hi everybody, I'm new here!
I am (scuse me: WAS) enjoying a Stream 7
Some days ago I tried to install Windows 10 TP upgrading 8.1 with Bing. After some waiting time it succeeded, but unfortunately I forgave to put in the tablet's SSD the hp drivers, thinking they weren't necessary. So touchscreen, WiFi and all the other stuff didn't work. After I collegated via OTG a keyboard and a mouse I managed to use Windows 10.
Trying to install drivers, my fault, I opened an .exe of Realtek (maybe for the audio), tablet asked to reboot and after that I cannot access to Windows anymore.
I tried to boot Windows 8.1 from a USB, but it doesn't boot, the same even if i disable secure boot.
With disabled bitlocker Windows gives this error
In boot option I set these settings
I put the usb in this way:
The Stream doesn't consider the USB absolutely XD
If I enable again the secure boot Windows gives this error (that at 99% is caused by the .exe I installed):
Rebooting the Stream a couple of time with secure boot it goes in a menu (where touchscreen works) where there are a lot of options to reset Windows, but none of them works. If I try to format from this menu it asks for my account's password, but it doesn't accepts the mine :/
If I try to open the recovery (from volume minus button when it starts) it gives this message:
Waiting for help,
Thank you for your patience!
This question was solved.
View Solution.

Hi everyone. I think I have found a solution to this problem. Short background story, I too tried to install Windows 10 (10049) via Windows Update but I was never successful - got stuck at around 30% for more than an hour. I tried to restore to 8.1 but it gave me that 0xc000000f error. Luckily I had made a recovery image to USB before updating to Windows 10.
Please note that by doing this method, you will obviously lose your data.
Here's what you'll need:
- Recovery USB (if you don't have one, grab it from this link and I thank you that person from another post). Follow the instructions, this is just basically clean, format to FAT32, set primary and active, and then drag and drop the files and folders from the USB folder to the root USB drive. This particular recovery is from a 5701 model, there is actually no difference between Stream 7 models in terms of hardware, but software is configured differently (different language setup/format) depending on the country/region it's sold.
- OTG cable
- Powered USB hub
- USB Mouse and Keyboard
- A moment of your time
1. Plug in the OTG cable to the tablet, and then plug in the USB hub to power and to the OTG. After that, plug in the USB mouse and keyboard and Recovery USB to the USB hub.
2. Boot the tablet to BIOS by holding down Power + Volume Down at the same time, until you reach the Startup Menu.
3. Press F10 and navigate to System Configuration > Boot Options. In this menu, we'll have to restore the settings to default.
So if you have disabled Secure Boot, you first need to Clear All Secure Boot Keys and then Load HP Factory Default Keys. Then enable Secure Boot.
Make sure UEFI Boot Order is also default to as follows: OS boot Manager, USB Diskette, USB CD/DVD, Network Adapter.
If you did not make any changes, proceed to 4.
4. Be prepared to go back to the Startup Menu, because as soon as you press F10 and hit Yes, the tablet will automatically restart. So press and hold the Volume Down button after you hit on Yes.
5. Press F9 and select Boot From EFI File. If you've done the recovery image ghosting correctly onto the Recovery USB, you should see two entries. One should be RECOVERY and the other may depend (it could be SYSTEM or No label). Select RECOVERY, and then select bootmgr.efi.
At this point the tablet will boot off from the USB and will bring you to Windows Recovery.
6. Select your keyboard layout, and navigate to Troubleshoot > Reset your PC.
If the drive partition/boot manager is not damaged, it will ask for a recovery key. You can actually skip this step and hide the numpad, revealing the option Skip this drive if you don't have the recovery key anymore, or just really want to start anew.
If the drive partition/boot manager is damaged, the Reset will proceed and will ask you to select a target operating system. In my case it was Windows 8.1.
7. The next screen will be about Reset your PC telling you what's going to happen. Tap Yes > Yes, repartition the drives > Fully clean the drive > Reset.
The tablet will now do its thing and restore to factory default.
After restoration, a BIOS screen will come up asking if you want to clear the TPM keys. Select Yes, and this will create a new key for the restored installation, bringing you back to a fully factory default tablet.
Notes:
I recommend not installing a generic Windows 8.1 ISO that is copied straight to the USB drive using the Windows 7 USB/DVD Tool or RUFUS. They won't be compressed or the same as WIMBOOT, which will take up more storage space than stock recovery.
You could actually install another version of Windows 8.1 on the tablet, assuming you know what you are doing (ie. making a WIMBOOT image).
You could also actually install Windows Technical Preview directly, again, assuming you know what you are doing.
This is just a guide to help you try recover your tablet from a failed Technical Preview installation. I hold no responsiblities over your actions.
What I recommend is that use 8.1 for now, and wait for the official release (or at least a more stable Technical Preview release for this tablet if you can't wait that long) of Windows 10.

Can't restore Iphone 3gs because can't charge

I have an iPhone 3GS that I bought from ebay about a year ago and although it's worked fairly well so far, there have been the occasional glitch, which I've always been able to fix myself (needing to be restored, issues with software, etc).
However, last night a new one cropped up and I'm somewhat stuck. The battery, for some reason, completely, which I can only assume is due to my having left something running by mistake. When I went to charge it, it repeatedly switched on and off. As it was the middle of the night, I unplugged it so I could sleep, and tried again this morning. Same thing. It switches on, gets as far as showing the lock screen (complete with 'No Service' at the top left), says it has 5% charge and then goes black and does the whole thing over again. It does this consistently, making it so that I can't get the phone to charge or anything. I attempted to put it into restore mode, but since the battery's dead, I can't start the process without the phone plugged in because I get told to charge it.
Is there any way I can get it to not switch on when I plug it in, so that I can at least charge it so that I'm able to try to restore it? I do have insurance on it, but I'm a little wary of using it just yet, in case this is easily fixable, and as it's secondhand, it's well out of Apple warranty.

Unfortunately, I haven't been able to get to the genius bar, so I took it to a local repair shop that's always been good in the past. He replaced the battery and, for good measure, the charging port. So far, no change, it's still stuck in a boot loop. I can sometimes get it as far as selecting my country and connecting to iTunes, then the problem starts over again

Can you save photos when you can't remember your passcode?

My daughter can't remember her passcode for her iTouch. I would like to save the photos to our desktop before I restore it. Does anyone know how?

If when you do this:
iOS: Importing personal photos and videos from iOS devices to your computer
you cant't import the photos then:
- If you used PhotoStream then try getting them from your PhotoStream. See that topic of:
iOS: Importing personal photos and videos from iOS devices to your computer
- Maybe via How to perform iPad recovery for photos, videos
Wondershare Dr.Fone for iOS: iPhone Data Recovery - Wondershare Official

How can I save transparency/inner glow effects when exporting to jpg?

I'm very new to InDesign. I increased the noise levels in inner glow in 'Effects' to create a textured look to my document (I wanted a paper texture and found this method on Google) but when I exported to pdf or jpg, I realized that my transparency effects completely disappeared. I checked my export settings and the flattening tool has been set to default.
Can someone help me understand what I should do to export that textured effect please?
Thank you!

Export to JPG has never been all that great and stopped trying it a long
time ago. Export to PDF and open that in Photoshop.

Have Firefox many years & latest but NOW can NOT access any part because can NOT sign in and not allowed to register, do I have to go to Chrome?????

AT LAST have found out how to register, which I had to do to ask this question which was "How do I register".
Your previous joke was that I only had to download Firefox to register. As I have used Firefox for many years and have the latest it is clear why I do not see your JOKE!!!!!!!!!!!!! You seem to have a more twisted mind than a politician, that is NOT a joke. How many years have you spent trying to think up such trash.

If you care to ask a real question, we may be able to help you.
But if all you want to do is vent . . . . .

Photoshop CS6 can't save to server after upgrading to Mac OS Yosemite Server from Mac Lion Server

We recently upgraded our server from a Mac Pro 2008 with OS X Lion Server to a Mac Mini 2014 with LaCie 20TB 5Big Thunderbolt 2 RAID drive. Everything is working fine with the exception of Photoshop. It does it intermittently but once it happens it will continue to do so. We get message like "Can't save to disk because of disk error" and "Can't save file because of program error" . Sometime we are able to do a "save as" and save over it. Most of the time we have to "save as" with a different file name and then rename and recopy the file. We have check permission on all the file as well as the server HD has ignore ownership checked. Again only three things changed. 1) Sever hardware change from Mac Pro to Mac Mini. 2) Server software upgraded from 10.7 Lion to 10.10 Yosemite(both have the latest update). 3) Drive when from internal on Mac Pro to External Thunderbolt 2 LaCie drive. We have no problem with Illustrator or Indesign. Only Photoshop. Anyone with any suggestion is greatly appreciated.

Unfortunately you seem to be using Photoshop in a way that Adobe discourages, so you may not be getting a lot of helpful advice.
Networks, removable media | Photoshop | CS4 and later

Using tab groups but Firefox 28.0 crashes and even can not save all tabs in archive recently

Hi. I installed tab groups addon on my firefox 28.0 (firefox portable version) and each group has its tabs. of course. Problem is that Firefox crashes when i work on a group with the tabs and even can not save all tabs in archive as MAFF recently too. When i try to save all tabs in archive as... i choose the name and hit save and wait but after some time this crashes too. Last time i saved all my tabs and groups as MAFF or other file was end of april and since then i can not save them anymore because of the crashing.
I read on the help site to delete Firefox then reinstall ect. to fix problems but I DO NOT want to erase my groups with their tabs as i chose this solution working with group tabs as it would be to hard on my cpu when i use for each group a different browser for example.
Please help me fix this problem with the crashes but without loosing my groups and its tabs as they are all important and do not wish to erase them as i use them all.
Thanks and hope for a soon reply :)

Can you give me your crash reports?
#Enter ''about:crashes'' in the Firefox address bar and press Enter. A Submitted Crash Reports list will appear, similar to the one shown below.
#Copy the '''5''' most recent Report IDs that start with '''bp-''' and paste them into your response here.

Can't save as template because "can't export as template"

Similar Messages

Maybe you are looking for