Can't save attached file on another computer on the network

Hi,
I'm using mail with Yosemite, and if I try to save attached file to another network location, the shortcut in the left column in the find disapear
when I return in the finder (alt+tab -> finder) the shortcuts are missing, I have to re-create them.
I can only save attachement on my own iMac, and then go to the finder and move them on the main computer which contains all our folders.
is there any solution?
thanks!
NB: I did usually do so on the previous version (maverick)

you are not alone...
http://www.appleinsider.com/articles/08/05/30/macos_x_10_5_3_users_grapple_with_bugs_in_adobe_cs3graphics.html
edit: i didn't notice that you are using cs1, but maybe it's a variation on the cs3 problem

Similar Messages

  • Is there a way to send PP renders to another computer on the network?

    Is there a way I can send renders out of Premiere Pro CS6 to another computer on the network that has Adobe Media Encoder CS6 installed?

    You'd have to have PP installed on the other computer as well, and copy all the media and other assets over to that computer, along with the PP project file, and then start PP on that second computer and send to AME from there.
    In short, no.

  • How to mutliplexe my  files on another computer in a network

    Good day
    I work on oracle10g installed on a server in a local network.
    The problem that I face is that I would like to multiplexe my controlfiles in another computer.
    I also want my flash recovery area to be on another computer than the server.
    How can i do it?
    thanks for your answer

    Hi,
    I work on oracle10g installed on a server in a local network.
    The problem that I face is that I would like to multiplexe my controlfiles in another computer.
    I also want my flash recovery area to be on another computer than the server.
    How can i do it?
    First of all you should have the network connection between the system with enough Access Right without of probing for user name every time you do Access. As we don't which OS you are using.
    Mutliplexing ;-
    Shutdown
    Copy the Control to the Required destination
    Rename the file appopriately.
    Add the path and new control file in the initialization file.
    startup.
    But I could not able to what is the use of multiplexing on different systems, as moragan you do it on Single Server but different Drives, that makes life easier.
    - Pavan Kumar N

  • Can't mount another computer on the network, or print, but can see all

    When I attempt to connect to another computer on the ethernet network in the office, I can see lots of other computers on the network but I can't quite get there. This is only a recent problem that began a week or so ago and there were no problems earlier.
    I can make it through Network >> Local >> Select the computer I wish to connect to >> Enter the password >> Select the volumes I wish to mount >> but then that's it, I get the spinning beach ball and nothing more happens. I don't understand how I can be seeing the volume and yet unable to mount it.
    However, at the same time I can also see the printers on the network and am unable to print to them which indicates that there may be a related problem. No-one else on the network is having any issues connecting to other computers or printers.

    I have the same problem - printers, volumes, computers - I have to relaunch the finder as soon as try to connect as a guest or registered user

  • Windows 7 fails when authenticating to another computer on the network

    In Windows 7 (home premium, 64 bit), I am attached to a VPN (Using OpenVPN). Then, whenever I try to either:
    - Use explorer to look at the file system of another computer 
    - Use the remote desktop connection on another computer
    - Map a folder on another computer as a network drive
    ... in all of these cases, I get the authentication dialog and once I send my username and password, it crashes. For example, when I use explorer, it hangs, and then comes back with the message: "Explorer has stopped working"
    I have elsewhere seen a proposed solution for similar symptoms, of deleting this key: 
    HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\SQMClient\Windows\DisabledSessions\MachineThrottling 
    However, this is not applicable in my case, as the key is not present.
    I don't think that this can be a problem with the network, because:
    a) this works fine from a different computer, running XP,
    b) I have in fact seen this working on this computer, but just once, straight after a system restore, and I can't replicate the success by doing another system restore.
    c) If it were a problem with the network, you would expect Windows to fail gracefully.
    Additionally:
    - Disabling the firewall doesn't help.
    - Disabling the antivirus software (AVG) doesn't help.
    - Doing a clean boot doesn't help.
    I'd be grateful for any suggestions.

    try changing windows authentication levels
    http://social.technet.microsoft.com/Forums/windows/en-US/aca3e2d0-6d43-431f-bbba-3c01aea6d5a6/changing-authentication-level?forum=w7itpronetworking
    http://technet.microsoft.com/en-us/library/jj852207.aspx

  • How can I save .mov file as another .mov file after trim from Pre9?

    I would have thought this would be simple.  Just like I can crop a still image in Photoshop and save it with a new name (or the same name), I expected to be able to trim or split an .mov file in Premiere Elements 9 and save the resulting file(s) under a new name (or the same name) while preserving the same format.
    But SIX hours later, NO.
    Instead, after I split or trim the .mov file, it seems to be held hostage inside a project that won't let it go.  I even tried "exporting" it but the choices are different than the properties of the source file (a BAD thing), and the resulting two files from the export are unreadable on my computer (USELESS).
    The .mov file was shot with a Canon EOS Rebel T3i.  Windows with Vista.  Adobe Premiere Elements 9.  I also have Photoshop CS5 Extended and Lightroom 3.4.x, if either of those would help.
    I'm sure that I'm mistaken,  There MUST be a secret menu option to SAVE-the-trimmed-CLIP-as-a-SOURCE-file.
    How could there not be something this basic?

    ~ ~ ~ ~ ~ *** ~ ~ ~ ~ ~
    Quoting Steve:
    "I'll say it once more: It's impossible to cut a piece of video and then resave your file.....[because] IT'S [against] THE NATURE OF EDITING VIDEO WITH EVERY VIDEO EDITING SOFTWARE IN THE WORLD."
    ~ ~ ~ ~ ~ *** ~ ~ ~ ~ ~
    I'm very pleased to say that I've found out how to do exactly what I wanted to do, despite Steve's strongly stated opinion that it is "impossible."
    I can:
    ..... trim or split a video
    ..... and save it under the same name or a different name(s)
    ..... WITHOUT converting it to something else before or after trimming
    ..... WITHOUT changing it from its original format
    ..... WITHOUT exporting (compressing) it
    ..... WITHOUT "rendering" it different in any way except my desired length change (and resulting smaller file size)
    This is desireable to me in order to:
    ..... save many gigs of space on my terabyte drives
    ..... while retaining source file footage that may be useful in future projects
    ..... IN ITS ORIGINAL (source) FORMAT !!!!!
    YAY!!!
    I got thinking about the software that came with my camera.  I didn't install it because it included things like a program to handle RAW images (and I prefer to use Adobe Lightroom 3) and a program that I thought might be similar to Bridge (and I really like Adobe Bridge).
    But I decided to install it and see if there was anything there that would allow me to work with the videos and sure enough, there it was - the ability to trim my videos of the junk while keeping the rest in original perfect format, just as it was shot. From a user's point of view, it is a precise video version of cropping a still image in Photoshop.  EXACTLY what I wanted to do!!!
    Here is a collage of the properties box of the "before" version (the original original), collaged together with the  properties box of the "after" version (the trimmed original).  The properties boxes are the properties as reported by Adobe Premiere Elements 9.
    In the above-shown collage of the screenshots that I've made for you, you can see that nothing has changed in terms of the properties.  The only changes are the length (because I cut it), the file size (because it is MUCH smaller now), and the name (because I wanted to preserve the original file in order to make a screenshot of its properties for you). I WANT TO REPEAT - the new CUT file is identical to the original, except the unwanted portion has been cropped away. It was NOT compressed, it was NOT rendered, it was NOT exported.  It is a true source file utilizing original footage in its original format.
    (This forum limits images to 450 pix wide so to see that all the relevant format properties are the same in both properties boxes, you may have to increase the size through your browser by holding down the [Ctrl] and hitting the "=" key (the one with the "+" above the "=" sign).)
    ~ ~ ~ ~ ~ *** ~ ~ ~ ~ ~
    Here are the steps I took to make the screenshot above:
    1 - Opened the original file in Canon ZoomBrowser EX 6.7 (which came with the camera).
    2 - Trimmed ("cut") the file by placing a start point and stop point around the desirable footage.
    3 - Saved under a different file name.  (NOTE:  This was a true save, NOT an export, NOT a "render" of some sort.)
    4 - Switched to Adobe Premiere Elements 9 and started a new "project."
    5 - Used "Get Media" to pull the original version and the cut version of the video into the project.  NOTE:  I pulled the cut version in first, so if there had been a format mismatch (as compared with the DSLR-1080p30 @29.97 setting I normally use when creating a new project), Premiere would have said so.  But there was NOT a format mismatch.  And it runs perfectly, just as it did before, including audio.
    6 - Right clicked each video and took a screenshot of the properties of each to show you.
    And this means I can use the trimmed footage for any purpose down the road, yet I didn't have to save the entire file which included unwanted footage.  And I've saved a considerable amount of space on one of my terabyte drives.
    SUMMARY:
    Easy as pie:
    I trimmed the excess off a video WITHOUT "converting," "exporting," "compressing," "rendering" or changing the format away from the original in any way.
    No loss of any type of data whether audio or visual or "other."  (Except, of course, the unwanted footage.)

  • How can I create a file to another computer

    Hi.
    I was wondering how can I create or write a txt file but in another computer(Server).
    For instance, using the BufferedWriter to write in my computer I can do.
    BufferedWriter out = new BufferedWriter(new FileWriter("C://hello.txt", false));
    There is a way to write directly to the server? do I need to create a Server/Client protocol? it can do directly by BufferWriter?
    Thank you, any help it will be very great.
    Chris

    if the server is windows based (or runs SAMBA) then it is very easy to just use the host machine's path.
    i.e.
    BufferedWriter out = new BufferedWriter(new FileWriter("\\\\Server\\C\\hello.txt", false));
    where the server's hostname is 'Server"
    and you have shared a directory called "C"

  • Can't connect to another computer on the network

    Hello. In my office, we are currently trying to upgrade to the new Mac Pros and Leopard. We have one computer setup so far. We constantly connect to different computers to share files, but we cannot connect to this new one. When I open Network in the finder, I can see the computer, but when I click connect, it just says AFP connection status "Looking up 'Comp X'.local.." The computer is definitely hooked up to the network. Why can't I connect? Thank you!

    Ensure that file sharing is enabled on all computers, and under the file sharing in the "Advanced" (or maybe "Options" button) settings ensure that "AFP" is checked (there should also be SMB and FTP options as well).
    Additionally, try turning off the firewall in the "Security" system preference pane. Set it to allow all connections, and see if you can connect. The Firewall in Leopard is relatively new in OS X, and still has some problems where it denies service to some network functions.

  • Can't connect to another computer on the network with 'good' password

    Hi;
    Out of the blue my wife can no longer connect to my machine on our local network using her normal password. She gets the error 'Sorry, the password you entered is incorrect. Please re-enter it' at the login box. In testing her password it seems fine for all else - can log into her machine fine, can log into other computers on our network OK, do administrator things, etc.....just no long into mine.
    I can log into my machine from hers using my account info, so the connection is fine it seems. It just won't accept her password for this single action.
    Have repaired permissions on both machines, restarted several times, etc. all to no avail. Went to look into her keychain to see if something was amiss there but did not really see anything that pointed to this particular interaction (perhaps it is stored elsewhere?)
    Nothing out of the ordinary happened to her nor my machine that I can think of. Her machine is still on 10.3.9 and I'm on 10.4.7.
    Scratching my head on this one, so any help much apprecated.
    ~Roger

    After considerable testing I've determined that the problem is in the sharing settings on my computer and not the password on the other computer. I've not solved the issue but clarified the questions I have and posted under the 'networking and sharing' discussion in hopes of some help.

  • How do you run a program on another computer over the network

    Would like to send and receive my aol email and run other applications from my other G4 that I don't have installed in my main computer through the in house network- without opening the application on the main computer. In other words, running the 2nd computer from the main computer.
    Does that make any sense?
    Hope so, j

    Hi Joseph, makes perfect sense!
    You need to get Chicken of the VNC on yours...
    http://sourceforge.net/projects/cotvnc/
    Then on the other G4>System Preferences>Sharing, enable these Services...
    Personal File Sharing
    Remote Login
    Personal Web Sharing
    Apple Remote Desktop
    Remote Apple Events
    You should be able to have the other G4's screen show up on yours and run the other one.

  • How can I add old bookmarks from another computer to the ones I have on my new computer?

    My old computer crashed; and was replaced with a new one running Windows 7. I had saved my bookmarks, but couldn't find the thumb drive where they were saved, so began using Firefox on my new computer. Now I have bookmarks saved onto my new computer, but want to upload and merge my old bookmarks. I've only found a way to restore bookmarks that will complete wipe out the new ones. Short of writing down all the new ones and adding them back after restoring the old ones, is there any other way to merge the two?

    Profile is a folder which store all your personal data in a safe place
    * https://support.mozilla.com/en-US/kb/Profiles
    * here explain how to backup profile https://support.mozilla.com/en-US/kb/Backing%20up%20your%20information
    * here explain how to restore it
    https://support.mozilla.com/en-US/kb/Recovering%20important%20data%20from%20an%20old%20profile

  • Finding another computer on the network

    I just got my very first mac 2 days ago, it's a mac book pro 15 inch and I wanna know how to find my PC over the network with OS X 10.6 snow leopard?? i'm not familiar with OS X very well soooo help me lol

    [This read will help you get going|http://support.apple.com/kb/HT1549]. Read the Mac to Mac part first. Eventually, you will get to the Mac to PC part.
    Message was edited by: donv (The Ghost)
    Message was edited by: donv (The Ghost)

  • How can you save a file with CS4 so that it can be opened with CS3?

    I fave a file that I have sent someone, but they can't open it because they don't have CS4. How can I save a file, using CS4, so that the file can be opened with CS3?
    Thanx

    From the help file: http://help.adobe.com/en_US/Illustrator/14.0/WS714a382cdf7d304e7e07d0100196cbc5f-655fa.ht ml

  • How do I add a printer connected to another iMac on the network to my printer list?

    How do I add an Epson printer connected to an iMac on the network to the printer list on my MacBook Pro? I cannot get it to show up in the list for printers to add.

    That only works if the printer is itself a network printer. You can't do it if it is directly connected to another computer on the network unless it is configured to be a Shared Printer on the other computer.

  • Computer crashed. Tech emailed bookmark file to another computer using Chrome. How can I save it to Chrome, or at least open file to copy bookmarks?

    Computer crashed. Tech emailed bookmarks from FireFox file to another computer that uses Chrome. How can I save these bookmarks from a file saved on the desktop to Chrome, or at least open the file to copy the addresses?

    Restore JSON backup:
    * Bookmarks > Show All Bookmarks > Import & Backup > Restore > Choose File
    Export HTML backup:
    * Bookmarks > Show All Bookmarks > Import & Backup > Export HTML
    *http://kb.mozillazine.org/Backing_up_and_restoring_bookmarks_-_Firefox
    * http://kb.mozillazine.org/Export_bookmarks
    * http://kb.mozillazine.org/Import_bookmarks
    You can also use the portable Firefox version, that should work as well.
    *http://portableapps.com/apps/internet/firefox_portable

Maybe you are looking for