Can't save file: error message states -unbalanced tag..

<body class="twoColElsLtHdr">
I am not able to 'save as' a file I created yesterday.  An error message box comes up & states that line 249 is an 'unbalanced tag' I am hoping someone can explain what I need to do to get this problem resolved.  I was making a 'blurb optin page' just playing around with the newly downloaded DW & ended up (kinda) liking what I had made by the seat of my pants not knowing obviously what I was doing.  I inserted a 1shoppingcart html at one point & that is when things got screwey...Line 249 is very close to where I inserted the extra html code... Can someone help me please?  ... The unbalanced tag is listed above.  I don't know if this is all the info that would be needed for the solution.... Please let me know...
I thank you... Mae

Could also mean there is an unclosed tag of some sort either a div, a table, ..  it's only a guessing game without actually seeing the working page.
Could you upload the page (and associated files) to a server and provide a link.
Another way would be to put the page through the html validator and see if it picks up where the error is;
HTML Validator - http://validator.w3.org

Similar Messages

  • Can't save image, error message ???

    Hi, I'm trying to save a pdf image in photoshop, as I always do, hitting command S, or going to file-save. I keep getting an error message saying "could not save "x" file because the file is already in use or was left open". Well duh, of course it's in use, I'm working on it.
    Anybody know what's going on here? Am I missing something?
    Thanks!!
    Eric

    Thank you! I'll give it a try!
    Date: Sun, 16 Aug 2009 15:31:32 -0600
    From: [email protected]
    To: [email protected]
    Subject: can't save image, error message ???
    happens once in a while not sure why try a save as and over write the file now make changes and do a save and see if it works.
    If does not I would reset the preferences or trash the settings folder.
    >

  • Couldn't Save File - Error Message

    Recently after adding a few more pages and updating some existing pages on my site, I have been met with an error saying I cannot save my website using the save function of iWeb, I receive the "Couldn't Save File" error message, however it doesn't tell me what file can't be saved or what file might be missing. I am running verision 1.1.2. Thanks for any help anyone can provide.

    Dear DOHCVTEC187:
    I had that same error. iWeb would open with a "can't open file :unamed" error, and also would give me a "can't save" error. I searched on the discussions, and found a few things that might help.
    First, save/backup your Domain. That is where iWeb saves all that cool web info. It should be located in:
    <user>/Library/Application Support/iWeb.
    I try to make a back up this when ever I make big changes anyways. Alway a good idea. Burn it to Disk, put it on another HD. Etc. Then delete the original, leaving the folder empty.
    Second:
    Trash iWeb preferences, located:
    <user>/Library/Preferences/com.apple.iWeb.plist
    Now, use Disk utility to repair permissions. I do this as a helpful step.
    Then restart.
    After restarting, open up iWeb. Hopefully it opens with out the error, since we are starting from "scratch". It should ask for you to create a new page/ new site. ie, remaking a "domain". Make a singe page. Save and then quit iWeb. It should run smoothly.
    Now, go find that "new" domain you just made, and replace it with your old one.
    That should help.
    Also, one thing that I found when this error happened to me was that I had built links to documents , such as PDF for people to download. Thus the error "couldn't open, unnamed" etc. It was because those links were "broken", so I had to find each link that I pointed to a PDF, and double check that it was still working and pointed to the correct file. Could be a pain in the but if you have alot of PDF's, etc, but it was worth it.
    Hope this helps!
    15" PB g5   Mac OS X (10.4.9)  

  • Can't open file , error message 1310 & 2203

    can't open file , error message 1310 & 2203

    reproduce is easy. anytime i click to open an attachment or a pdf file.
    it won't open.  comes up with notice that adobe acrobat has stopped
    working and the program will close.  I can go to READER AND OPEN THE
    FILE BUT NOT FROM ACROBAT X PRO.   RATHER SILLY.
    ERROR MESSAGES ATTACHED
    THANKS FOR THE ASSIST
    Dan Valentine, GRI, e-PRO, MA min
    Broker-Owner
    Valentine Sales & Management
    "Building & Maintaining Rental Portfolios"
    "One-Stop-Shop: AcquireRehabLeaseManagementStrategic Disposition"
    www.ValentineTeam.com
    www.ValentinePropertyManagement.com
    www.InvestAZRentals.com
    12031 N. Cave Creek Rd.
    Phoenix, AZ 85020
    Cell-Text 602-377-0621
    Office- 602-866-0150
    Fax-602-926-8260
    [email protected]

  • How can i save the error message?

    In the execution of the integration process, and i get
    the mapping error as follow:
    RuntimeException in Message-Mapping transformation: Exception:[java.lang.IllegalArgumentException: Cannot cast to float. ] in class com.sap.aii.mappingtool.flib3.Stat method sum[com.sap.aii.mappingtool.flib3.Plainer@dddd08]
    <b>Now what i want is to save this message.</b>
    <b>How can i save this message?</b>
    Thank you for your advise and reading

    Hi,
       An exception name is just any string, like, "timeout"
    You usually have a control step, which waits for somethime (say a minute) and then transfers the control to exception handler, who handles the exception.
    <i>but i dont know from where i get the exception?</i>
    It not required for us to know from where the exception is raised as long as you have created an exception handler.
    The integration process, will search for the required exception handler and execute it. Make sure, that the exception handler is in one of the branches of the block.
    Hope this helps.
    Regards,
    Smitha.

  • Can't consolidate files- error message 69

    I am trying to back up my iTunes file to a hard drive. While consolidating, I repeatedly receive the error message :copying music failed. an unknown error occurred.
    It consolidates most of my music, but keeps stopping at random songs. Can anyone help me to solve my consolidation problem?

    If you've already tried clearing the cache file and personal config folder: Deleting a corrupted cache file
    A good next step would be restoring preferences: Restore preferences | Dreamweaver CS4, CS5, CS5.5, CS6
    Here are some other troubleshooting steps: http://helpx.adobe.com/dreamweaver/kb/troubleshoot-javascript-errors-dreamweaver-cs4.html
    If nothing works, a clean reinstall will probably do the trick: Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6

  • I am unable to open documents ending with .doc (rather than docx, which I can open). The error message states "[name of document]" is being used by "another user." Do you want to make a copy? Help!!!

    How can I open a Word document, when I receive this error message "[name of document]" is being used by "another user." Do you want to make a copy?
    (This only occurs on the documents I have saved as .doc; the ones saved as "docx" open for me. Help!

    Did you recently reinstall the OS then copy all your files back over? Do a Get info on one of the documents and see if your current UserName is listed and has Read & Write permissions. If not select the Documents folder and check that for Read & Write permissions for your UserName. If it doesn't have R & W permissions Add it so it does.

  • TS1372 Can not sync music in itunes to ipod touch classic get messages saying can not locate file. error message 1437 when attempting to restore to factory settings.

    When I attempt to sync my ipod classic in itunes some songs will sync then it freezes and get a message "canot sync file missing or cant find file"  WHen I s
    try to restore my ipod to factory setting i get error message 1437.  I using windows 7

    The 1437 error can be an early sign of hard disk damage and/or failure.  Try a doing a quick diagnostic on the drive's health status using the instructions posted by another forum member turingtest2 in this older post. He also describes what the numbers mean and how to interpret them.
    https://discussions.apple.com/thread/3110831?start=0&tstart=0
    B-rock

  • Cannot save file - error message

    Just finished importing a video 8 tape and captured it in fce. When I go to save the file, it won't let me indicating file error: unknown file.
    Don't know what to do - any help would be appreciated.
    Susie

    Please give exactly details of how you imported this material and what format it is. Look in the QuickTime player for info.

  • Can't save file: Error Code 0

    I'm having trouble saving my files using InDesign CS5. The following message comes up: Cannot save... the file "DBTmp534-829951059" is damaged (error code: 0) (Also this affects saving my "Word" documents.) Please help! This project is due tomorrow! Thanks!
    P.S. I tried to follow one of the prior suggestions I saw under troubleshooting, but couldn't find the file to delete.

    This is a file problem, not something that is likey to be fixed by deleting anything.  That's a very serious error, are you still able to open the file?  If you can try exporting to .idml and see if that can be saved to a new name. See Remove minor corruption by exporting

  • How can i stop an error message that comes up when i am using word? the error message is "word is unable to save the Autorecover file in the location specified. Make sure that you have specified a valid location for Autoreover files in Preferences,-

    how can i stop an error message that comes up when i am using word? the error message is "word is unable to save the Autorecover file in the location specified. Make sure that you have specified a valid location for Autoreover files in Preferences,…"

    It sounds like if you open Preferences in Word there will be a place where you can specify where to store autorecover files. Right now it sounds like it's pointing to somewhere that doesn't exist.

  • Itunes document manager pro will not open a document with .cwk extension. It will catch the document then error message states that it cannot open document. Can anyone tell me what Im doing wrong?

    Itunes document manager pro will not open a document with .cwk extension. It will catch the document then error message states that it cannot open document. Can anyone tell me what Im doing wrong?

    Forgive my ignorance but I have never hear of iTunes Document Manager Pro. If you mean Document Manager Pro, i was able to find that. Back to your problem, have you tried opening one of those files in the iOS iWorks apps? Form the quick read that I did about this, .cwk files can be opened by Pages, Numbers or Keynote, depending on what type of document that it is and those files can be read by Document Manager Pro, after properly saving them. I don't see that you can go directly from the .cwk file in Document Manager Pro without converting them first.
    I took a very quick look at the app, so I may be a missing something about its capability.

  • I do not have Microsoft office and to know if I can still open docx files - error message reads corrupt files.  Is there a reliable converter out there?

    I do not have Microsoft office and want to know if I can still open docx files - error message reads corrupt files.  Is there a reliable converter out there?  I am a new mac user.

    Install the free LibreOffice and save a bundle not having to pay MS. http://www.libreoffice.org/

  • I am unable to sync to my Ipod. Error message states "unable to sync because duplicate file name exist. Any ideas how to remedy?

    I am unable to sync to my ipod. Error message states "unable to sync because duplicate file name exist". Any ideas on how to remedy this problem?

    Were some of the songs purchased from a different itunes account?

  • HT5654 iTunes auto update downloaded and installed on 28/01/2014. iTunes now won't launch and error message states file MSVCR80.dll is missing. Tried uninstalling and downloading/installing again to no avail. Any clues?

    iTunes auto-update dowloaded and installed on 28/01/2014. iTunes now won't launch and error message states file MSVCR80.dll is missing. Tried unistalling and downloading/installing again to no avail.  Any clues?

    Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
    (99269)

Maybe you are looking for

  • In Design crashes while making interactive pdf

    I'm having problems exporting an InDesign file as an interactive .pdf. The file crashes about half way through the document on a specific page number (33). The InDesign file is set up with buttons and bookmarks. I have 4 other files which are differe

  • Scan application server directory to read a file by pattern

    Hi Experts,er I am trying to search for a file which is on application server File Name: payroll_1000_date_timestamp Since i will not know the timestamp on the file i will have to search the file in the folder like this: payroll_1000_date_* I have tr

  • Bright White Pixel on LCD - But NOT Visible on Black Background

    Hi All, Just noticed today on my macbook pro (Early 08 - july manufacture) that a small white spot has appeared. Not the blobby large spots that were common lcd problems before on older models, but almost a pinprick of a white spot. Now its not a dea

  • Transfering qty from one prod to other

    Hi, our some products are like by during minor changes like drilling one hole,that will become another product. So, incase of shortage of any product, we simply do some minor work on another product and we use it as that prouct. pls note that mat no

  • Import Wizard vs LCM for Migration of BO from one server to another

    Hi Experts, Can anyone highlight the differences between Import Wizard and LCM (in terms of migrating/deploying BO from one server to another)? We are currently using BO XI 3.0, which does not support LCM. I'd like to know if LCM has enough advantage