Can't save Photoshop file as a PDF

The file is RGB and 8-bit, but it is a really large document (144 x 24 inches). When I go to Save As > No PDF option shows up...see screenshot.

Sorry, screenshot closes the "Format" dialogue box. Only options are PSB, TIFF and RAW files.

Similar Messages

Can't save Photoshop file in Mavericks

I am unable to save files in folders from Photoshop (CS6 or CC) with the new Mavericks operating system. The only reason I was quick to upgrade was due to issues I had with the initial set-up of my new 27" iMac. Now I'm not so sure it was the right move. The only way around this problem is to save the file to the desktop and then drag it into the appropriate folder.

Hi Eric,
I am copying to Smb share folder not local disk. I can't see share in Disk utility.
That disk is EXt3 formatted.
I was able to copy 7GB to same shared folder in Win xp.
Cheers

Can't Save Photoshop file on Network Server

To start of with some specs, im running Mac OS 10.5.3 and CS1 on a Dual 1.8GHz PowerPC G5, however the issue also exists on a MacMini running the same OS and CS1. I connect to a server at work via afp and that is where we store all of our files. We are usually asked to work on the server and i do just that, however when trying to SAVE a file in photoshop i get an error message...
Could not save "filename" because write access was not granted.
When i try to save again after this error message, it brings me directly to Save As, if i save it as the same file name and replace 95% of the time it works just fine, the other 5% i get the error again and have to repeat the process until it works. Another solution is just saving it to my own desktop and dragging it over to the desired location, no problem there.
I have checked permissions on the server multiple times and obviously it isn't an issue because i am able to simply drag files over and Save As without issue. Also this problem is exclusive to Photoshop CS, i have not had the same issues with GoLive and saving to the server.
I was simply wondering if anyone else had encountered this and had a solution? Thanks in advance.

you are not alone...
http://www.appleinsider.com/articles/08/05/30/macos_x_10_5_3_users_grapple_with_bugs_in_adobe_cs3graphics.html
edit: i didn't notice that you are using cs1, but maybe it's a variation on the cs3 problem

Can't save Publisher file correctly as PDF

I have always been able to save Publsiher files as PDF files w/o any problem. Just recently, my Publsiher documents, when saved as a PDF file, have been saving only half of each page on a two page spread. The right side of the left page and the left side of the right page are shown in the PDF document and I cannot figure out how to solve this problem. PLEASE help. I need to send the file to other members of my group and they cannot view the file correctly.
Thank you!

Not sure why you ask in the Adobe Reader forum; I would think the problem is on the MS Publisher side?

Admin permissions won't let me save photoshop files

I moved my MacBook Pro to my son and made him administrator. That worked fine, but now something must have happened because he now can't save Photoshop files anymore as photoshop says he doesn't have permissions. He's running Snow Leopard as he has to use Canvas X, which won't run in Lion. Anyone have an idea what may be screwing up permissions? He did run Repair Permissions in Disk Utility. He is listed as the administrator in Accounts. He also made sure the file Get Info permissions allowed the Admin. He even changed the Get Info permissions to enable everyone.

He's just trying to save a tiff file from PhotoShop back over the original tiff on the Mac's internal hard drive.
He changed the permissions to allow everyone access on the original tiff that he had Opened in PhotoShop.
A little more history: He had an unrecoverable hard drive crash about 2 months ago. So we installed the backup drive that had a SuperDuper copy of the crashed drive that was about 3 weeks old (from the crashed drive's data).
This drive worked fine until this week when the clock reset to 2000. That's the same time the permissions problems started.
I had earlier made him the administrator, but now he had to login with my password and I was shown as the startup admin. Since I was the original owner and admin, I had placed all my applications in the top level Applications folder of the hard drive, not in my Home Applications folder; and now it appeared that he only had access to Applications in the Home folder as a User instead of Admin, thus explaining why he didn't have access to the applications he needed.
So he reset the PRAM to address the clock and other screwy things.
Now he is shown as the administrator in System Preferences>Accounts, but without the permissions of an administrator.

I am using CS3 and want to save a file as a pdf where someone can then edit the text. How can I do this please? Thank you :)

I am using CS3 and want to save a file as a pdf where someone can then edit the text. How can I do this please? Thank you

You might be able to use the newest adobe reader program/application for that.
You would have to save your pdf out of photoshop cs3 without any text and then add the text to the pdf in adobe reader.
The text added in adobe reader can't be edited in photoshop, so the other people would have to adobe reader or acrobat to edit the text.
https://helpx.adobe.com/reader.html

Whenever I try to save a file as a PDF, it tells me it can't save because the file is open somewhere else. This is not the case and I have tried it with different files. Please help. You can also call me at:(301)651-9616

Whenever I try to save a file as a PDF, it tells me that it can't save, because the file is open somewhere else. I don't have anything else open. I have also tried different files and they all say the same thing. Help.

Given there are so many problems and removed features in Pages 5, why not just continue using Pages '09?
http://www.freeforum101.com/iworktipsntrick/viewforum.php?f=22&mforum=iworktipsn trick
http://www.freeforum101.com/iworktipsntrick/viewtopic.php?t=432&mforum=iworktips ntrick
Peter

I've doubled my RAM but still can't save big files in photoshop...

I have just upgraded my Ram from the shipped 4GB to 8GB but I still can't save big images in photoshop. It seems to have made no difference to the speed of general tasks and saving and I can't save big files in photoshop at all. I already moved massive amounts of files off my computer and onto my external hard drive, so there is much less in my computer now, and twice the RAM but it is making no noticeable difference. When I click memory, under 'about my mac' it shows that the RAM is installed and now has twice the memory. Could this be something to do with photoshop? I'm running CS6.

Also, I just calculated 220 cm into inches and this is roughly 86.5 inches. Over 7 feet in length.
WIth an image that large, you may want to consider down sampling to a lower DPI to help with being able to work on and process images of this size much easier and it will be easier for your Print house to process, as well.
You might want to consider working with these rather large images at 225 DPI instead of 300 if resolution at close distances is still a concern.
Or what you good try is working with the images at 300 DPI, but then save them/export them as a Jpeg image at the highest image quality setting.
I do a lot of project where I use a high resolution jpeg image to save on image proceesing overhead.
The final printed images still come out pretty clear, clean and crisp without having to process those large files at a print house or having to deal with using that full resolution image in a page layout or illustration program.

Is Photoshop CS6 can't save a file more than 2gegabites?

Is Photoshop CS6 can't save a file more than 2gegabites?

It depends on the file format, many formats are limited to 2 or 4 Gigabytes.
PSB (Large Document Format) is not so limited.

HT5534 can i save the file which is edited in pages as docx,pdf etc????

can i save the file which is edited in pages as docx,pdf etc????

Use either the File menu > Export or Share menu > Export & choose the format.

¿Dear Sirs, I can create with "Photoshop Elements 12", a PDF file of several pages?. I can create a "pdf" file, but not of several pages. Thank you

¿Dear Sirs,
I can create with "Photoshop Elements 12", a PDF file of several pages?.
I can create a "pdf" file, but not of several pages.
Thank you
Valentín Uriarte

This is the Photoshop Elements forum.
If you are using Acrobat, ask Here:
Acrobat

How can I save a file from an email on an iPad to upload to my web based ap

I use my iPad in my business, I get emails sending me files that I then need to upload up to my Salesforce.com web based application. I can't see where I can either save the file to or pick the file up from ? Is there a way to do this or is at an iPad limitation ?

Hi,
What is the mail app that you use to read emails on your iPad? Is it Apple Mail?
Would you take a look at the Mail section of the following FAQ document to see if it answers your question?
How to open PDF documents in Adobe Reader for iOS (iPad on iOS 7 or 8 version)

"Can't Save the File. Can't Print the File" error in Illustrato CS3

I get the error "CAN'T SAVE THE FILE. CAN'T PRINT THE FILE". In Illustrator CS3
According to adobe this is an issue of having more that 28 spot colors, so I went to the swatch palette and pulled the fly-out menu out and told it to remove any unused swatches which took me down to 6 spot colors, but I still get the error when trying to save it to EPS format, which is the format I have to have for the ripping program for the vinyl printer in my sign shop. Saving it in AI format causes no issues.
Is there still something I am missing?
Thanks
Roger

I appreciate your comment, I see what your saying.
However...my issue is...I am making a vehicle wrap on a full size van for a radio station and it consist of pictures of a clouds for the background with two pictures of music artist that are associated with the kind of music this station plays, then there is a big round logo of the radio station that involves three spot colors (Purple, white and one of which is technically the black "K" ribbon) along with the web address of the station but it is of the same colors of the radio station logo...then there is the corporate logo that utilizes another spot color (blue)so as you can see I need the spot colors that I'm using.
So just to make sure I'm clear...I can only have 28 different individual colors, even though I have photos involved in the rendering? How can I make that work because photos obviously have more than 28 colors in them. It doesn't make sense because you can do a live trace on something in literally hundreds of colors.
Would it help if I flattened the photo work from photoshop before I move it to Illustrator? The reason I ask is because when I go to save and choose EPS the next save dialogue that comes up...down at the bottom there is two exclamations that one says something about embedding fonts, which I'm not concerned about and the other is something about there is some artwork that needs flattening.
Please bear with me here cause I am definitely a newbie!! My boss threw to the wolves on this adventure and I am learning by reading and trial and error.
Thanks
Roger

I get message:can't save library file not enough access privileges.Don't understand what this means?

I get message:"Can't save library file. Not enough access privileges" .Don't understand what this means. No visible effect that I can see now.

Classic example of why you should save your workm in progress...just hit Ctrl+s to do it on the fly.
Yes I know. But it is the first time I work with Photoshop on such a big project and I thought it would be more stable.. Do the newer versions manage the memory better ?
You can shrink your image down which will make it smaller enough to save
Not enough memory to resize the image. And in the manipulation, it would corrupt some of my layers..
you can try to save as a diffeent format
I could succesfully save in Bitmap format. But I lose all my layers info..
The making loads of screen shots would be good if it wasnt really an
option seeing as it would use even more memory to do that then put the
image together out of the screen shots.
I made screen shots without any problem. I saved them through MS Paint without any memory problem, while Photoshop in parallel was just used as a static image for snapping...

Can I save my files to a flash drive?

How can I save my files to a thumb drive?

Hi !@#$%^&*()_+ (I hear ya!),
Are you referring to files stored in your Acrobat.com online account? If so, you can log in to your account at https://cloud.acrobat.com/files and select the files that you want to download/save to a flash drive. By default, they should download to your Downloads folder. From there, you can move them on to a flash drive.
Best,
Sara

Can't save Photoshop file as a PDF

Similar Messages

Maybe you are looking for