Can't save to mapped drive, Save disabled for any network location - Photoshop CS3 on Win 7 x 64

This just started Saturday.  Has worked for a long time.  I did not change anything as far as I can tell.
Win 7 x 64
Intel I5 with 6gigs of ram
I have a few drives that are mapped and I though this was the issue but when I am using Photoshop any time I click "Save As" and navigate to network drive, mapped or any shared folder on the network the Save button instantly gets greyed out. When I navigate back to any local hard drive the grey button turns back to normal (aka active).
I am at a loss as I can't find any information on the internet.
Strange that it has been working fine until 2 days ago.
The only option now is to save to local HD then manually move files to networked computer.
Any help would be appreciated.

Can you save to a UNC name?  E.g., \\SERVER\SHARE\Folder\File.ext
If so, this can possibly serve as a workaround.
Has your network admin changed any of the file, folder, or share permissions recently?
FYI, I just tried saving to a mapped network drive with  Photoshop CS5 12.0.2... No problem.
-Noel

Similar Messages

  • Can I use the mapping tool in Imovie for commercial purposes?

    Can I use the mapping tool in Imovie for commercial purposes?

    In general, yes.
    For the legalese, see this Apple document, section 2.G.iii.
    http://images.apple.com/legal/sla/docs/iLife11.pdf

  • I am using windows 7 and can't get the print drives to load for F2210 printer

    I am using windows 7 and can't get the print drives to load for F2210 printer and I keep receiving different fatal error codes.

    Hello @Imvertical 
    Welcome to the forums!
    I read about how you're attempting to install your Deskjet F2210 on your Windows 7 system and receive Fatal Error codes. I will do my best to help and make some suggestions for you to try. 
    To being, try a standard copy from the unit to see if it will copy. If copies work, continue troubleshooting. If not, let me know what happened when you made a copy.
    Next:
    Perform a Level 3 uninstall.
    There are 2 ways you can run the uninstall:
    From Original installation CD:
    1. Insert CD into drive, and then cancel the installer
    2. Click Start and open 'Computer', and then right click on the CD drive and open
    3. Open folder Util
    4. Open folder CCC
    5. If you have an HP computer run the L3uninstall.exe. If you have a non-HP computer run the L4uninstall.exe
    6. When the uninstall has completed restart the computer
    7. Run Disk cleanup from Accessories\ System Tools
    8. Download and install the latest version of Adobe flash player
    http://www.adobe.com/support/flashplayer/downloads.html
    9. Download the full feature software and drivers: HP Deskjet F2200/F2224 All-in-One Printer series Full Feature Software and Driver
    10. Run the download to reinstall the printer
    If software was downloaded and extracted to your system:
    1. Click Start and type %temp% in the run field
    2. Look for, and open the folder starting with 7z (Example: 7zS2356) (If there is more than one, choose the most recent folder)
    3. Open folder Util
    4. Open folder CCC
    5. If you have an HP computer run the L3uninstall.exe. If you have a non-HP computer run the L4uninstall.exe
    6. When the uninstall has completed restart the computer
    7. Run Disk cleanup from Accessories\ System Tools
    8. Download and install the latest version of Adobe flash player
    http://www.adobe.com/support/flashplayer/downloads.html
    9. Download the full feature software and drivers: HP Deskjet F2200/F2224 All-in-One Printer series Full Feature Software and Driver
    10. Run the download to reinstall the printer
    Please let me know if the installation worked after the Level 3 uninstall.
    Good luck and have a nice Wednesday!
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

  • Can't Open any files in photoshop CS3

    I can not open any files in Photoshop CS3. It has been working fine. I was using camera raw and did not open the file and now can't open any file in photoshop. I reinstall it photoshop and it did not work. I reinstall install window xp worked fine until I tried camera raw. Canon (xti) Only cs3 is on the computer now

    reset the preferences per the faq?
    http://www.adobeforums.com/webx/.ef4a07f/1

  • If my itouch was stolen and I put it in lost mode can the thief still turn on the wifi for me to locate it or do they need the password to turn it on?

    If my itouch was stolen and I put it in lost mode can the thief still turn on the wifi for me to locate it or do they need the password to turn it on?

    It can still connect to Wifi in Lost Mode. As long as you do not erase it, you will be able to track it via Find My iPhone. And even if you erase it, the Activation Lock will prevent the thief from ever being able to use it:
    ACTIVATION LOCK
    Hope you get it back!
    GB

  • How can I find fingerprint reader driver and software for windows 8.1 Pro - HP Dv5 1225et

    I have Hp dv5 1225et Laptop. There are drivers in Hp's web site for win 7 and vista.. I need validity sensors driver and software for windows 8.1 Pro (64Bit)... Thanks a lot all of users. 

    Hi @mfatihbodur
    Welcome to the HP Support Community. I see that you are looking for Windows 8.1 version of your Validity Sensor and SimplePass software. I have included the links below but as your model doesn't have drivers I can't guarantee that they will work but they are the latest versions.
    Validity Fingerprint Sensor Driver (Windows 8.1)
    HP SimplePass Identity Protection Software (Windows 8.1)
    Please click “Accept as Solution ” if you feel my post solved your issue.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Thank you,
    BHK6
    I work on behalf of HP

  • HELP - Windows 7 saves an entry of a connection to a network location in the start menu

    Hello Technet.
    I have a question regarding what the title says.
    After i connected to a network path on a client PC, from the start menu search, like; \\Fileserver01\Files$,
    even after a restart of the client, it still saves the entry in start menu if i just type in "\\"
    Is there any way to turn this off?
    I dont want my users to get any good ideas if you know what i mean ;)
    Thanks in advance for any help!
    -Fred Derek

    Hey, it's easy to to it.
    http://windows.microsoft.com/en-us/windows-vista/clear-the-run-history-on-the-start-menu
    Tzuri Ben Ezra TechNet Community Support A+, MCP, MCITP, MCSA.

  • How choose which partition of my external drive I use for my network

    Hi,
    I just bought a Linksys E3200 router for my network house. The setup was easy and everything work fine... well.. almost everything. I have a Iomega 1To external drive whit 2 partition ; the first one is a mac os extend for my Time Machine backup and the second one is NTSF for sharing my picture and music. I use the cisco connect software for setup my storage whit my external drive but I can't see the NTSF part. I can write/read in my mac partition but I don't want to use that part on my network.
    My question is : Can I have 2 partition on my network? If not, how can I choose the partition I wanna use.
    Thanks.
    PS: I'm sur you notice it but english isnt my first language, sorry if isn't clear.

    ksu62 wrote:
    The infection names are:  classload.jar-719ef6a5.zip
                                              classload.jar-5db452le31.zip
                                              ar3.jar-6ce3b2f-45l483f.zip
                                              classload.jar-lef99412-63bsd3fl.zip
    Those look alot like file names and not infection names. I don't find any reference to anything like that on Norton or VirusTotal. Since you said these were Trojans, I would expect to see "Trojan" as part of the infection name.
    ".jar" files are executable Java applets. The random alpha-numerics would seem to indicate a cache file, likely from a browser with Java enabled. And we all know what ".zip" means.
    Worst case is that you had Java enabled in a browser and were infected by one of the late variants of the Flashback Trojan over a year ago or one of a couple of other attacks using the same vulnerability but targetted against a small number of political sympathizers. Much more probable is that thes were Windows only Trojans. Hopefully you have a fully up-to-date OS X, including Java, and have disabled Java in all your browsers by now.

  • Added a Network, now Photoshop CS3 can't open the file...

    and says the file is no longer compatible. Also saya there are some unsupported blending problems. Is this a Network setting problem? It's a NETGEAR ReadyNAS +nv

    I may have found the problem.
    1. Changed the default printer settings to LOCAL - thank you
    2. Updated the video driver.
    Now the files open after being asked I want to keep them the layers- which I never had to do before.
    I still can not export using PSD2FLA driver, which is very important to me, so if you have any recommendations. The Photoshop export to Flash gives very poor quality layers.
    Thanks for the help. Hopefully I am back on track.

  • Can't add users' home folders to Windows Libraries - "unindexed network location" error

    I am unable to add our users' home folders to their Windows Libraries on client PCs.  Windows is giving an unindexed network location error.
    This worked perfectly fine in WHS 2011, but is failing on WSE 2012 R2 Essentials.
    I've checked the indexing settings on the server, and the correct locations are in fact being indexed. 
    Since several of our clients have limited local storage, I can't solve this by turning on Offline Files.
    Is this behavior by design, or am I seeing a bug? 
    I'm guessing that on WHS 2011 the user folders are special-cased somehow, as normally one would need to include the share root in a library for federated indexing to work correctly.  What is it about WHS 2011 that makes this work, and is it possible
    to replicate these settings on our WSE 2012 R2 server?
    Thank you.

    No, our clients are not domain joined.
    To clarify, I'm not trying to redirect local folders, but rather to add the (automatically provisioned) user folder on the server to local libraries.  Federated search does support this scenario in WHS, so I assume it should work in WSE. 
    Trying to understand why I'm seeing the error.  Thanks.

  • How can i get the service book Anworm TCP for all Network

    Hi every body BB community, I need the book Anworm TCP for all Network, because some body else saidme thath is posible recive smn/mmn and sed, using this service book.
    Tanks...

    Gotta say thank you — again.  Sorry the posts were spread out over more than one location.    I'll check and see if Third Party Software is considered a "peripheral", maybe that would have been a better single thread choice?
    Definitely news we can use and the reference link is appreciated.
    OT ~ We keep becoming more and more aware of how easy it is to lose one's bearings when it comes to keeping up with info tech.  My husband and I are both official members of the geezer set and have been out of the work force for some years.  You really do pick up so much just by being in the environment where people are using things to get work done.  A couple of old MP3 players, PPC G5, and a vintage Inspiron 3800 that someone didn't want any more is about it.  No cell phone, no iPod, no iPad, no home wireless network, no streaming media.  Fixed income.  So we do with what we can as long as we can.  If we could get by without that Intel processor, we'd probably make do with what we've got.  On the other hand, we've really wanted a notebook for a very long time and have to admit that needing to upgrade to accomodate my husband's project is pretty much just the "reason" we need.  I really mean it when I say that we are beyond appreciative that users take the time to share info and patiently educate those of us who fall into the "slow tech" category. 

  • Help, do anyone know what to do when iPad can´t close neither open. I have a message from iCloud : not enough storage, and now I can´t do anything !!!thanks for any help

    Help, do anyone know what to do when iPad can´t close neither open: have a message from icloud saying: not enough storage.. and now it´s blocked !!!! can´t do anything !!! Thank you for any help...Gyda

    Try a reset:
    Hold the Sleep and Home button down for about 10 second until you see the Apple logo.

  • Yoga 2 Pro can't authenticate when mapping drive to NAS share

    I have a Qnap TS-219 NAS(Linux/Samba) which I have all my computers connected to as part of a Windows Workgroup. I have set up a share on the NAS with an ID/password.  My new y2p will not allow authentication to the share.  I can see the share in explorer and I can fully access the public share on the NAS which does not have an ID/password.  I have turned off the y2p's firewall and removed McAfee; turned on file and print in all the network sharing places.  This appears to be an authentication issue specific to the y2p Windows 8.1 build.  I can connect fine from a home built W8 PC, Win7, and XP.  Any help is appreciated.  -Dan

    Through Explorer.  I've tried checking the "Remember me" and not checking the "Remember me" box.   And both ways do not work.  I've also tried NET USE from the command prompt.  I'm not an expert on that, so I'm not sure if I was using the correct syntax, but I received both Error 5 and Error 53.
    Thanks for the reply, I'll try the Credentials Manager tonight.

  • Can't see external firewire drive (DOS Fat 32) over network

    When I connect to another computer via airport (old/slow airport) I can't see a firewire 400 drive that is connect to the computer. The drive is mounted and working properly on the networked computer.
    The only caveat I can think of is that it has been formated as a DOS Fat 32 file system. Could this have anything to do with it not being shared?
    Any other ideas if not?
    alan

    Either get/use Sharepoints to solve the problem...
    http://hornware.com/sharepoints/
    Or log in as the Admin of the machine with the FW drive.

  • I had ATV first generation and used to use a software (VideoDrive) to make a quick movie conversion to iTune. Since I purchased the 2nd generation still I can convert the movies but streaming is disabled. Any advise ?

    I had ATV first generation and for the purpose of fast movie converting to iTune I used to use a software ( VideoDrive) , since I purchased the 2nd generation still I can convert movies but streaming via APT is disabled. Please advise if there is any solution for this or a new softawre with high speed converting function.
    Regards

    Many of your points are totally legitimate.
    This one, however, is not:
    …To put it another way, the design of the site seems to be geared much more towards its regular users than those the site is supposedly trying to "help"…
    The design and management of the forums for more than five years have driven literally dozens of the most valuable contributors and "regulars" away from the forums—permanently.
    The only conclusion a prudent, reasonable person can draw from this state of affairs is that Adobe consciously and deliberately want to kill these forums by attrition—without a the PR hit they would otherwise take if they suddenly just shut them down.

Maybe you are looking for