Can't save updates

Often I get an error message (-43) that I can't save a file that
I have already saved. Once I run permissions I can
usually continue normally. How can I prevent this from
happening (or can I?)
Les Hooper

Sorry my post comes out alone. I'm not familiar yet with this forum. In fact I wanted to add this as a reply or extra information to others that had the same problem. But I can't even find this post line I first saw up to now.

Similar Messages

Can't save/update advanced action with specific slide set to jump to

Using version 6. Experienced with Advanced Actions, but no clue what's causing this. If I include a "Jump to Slide" pointing at a certain slide in the project the action will not save or update. I can point at any other slide except the one I need. Nothing especially unique about the slide in question.

When you save/update, does it give any error/prompt?
Try creating a fresh script just with the action to jump to 'that' slide.
Also check from a regular button, if you can set on Success to jump to the particular slide.
Thanks,
Anjaneai

Can't save/update contacts.

Hello guys, I recently updated my BB z10 to 10.3.1.1779, It lagged at first, but now its working fine untill i wanted to save a contact, when i press on a number and chose add to contact > new contact> then i write the name and everything stops, i cant save or cancle or chose any option, even write anything, untill i close it by swiping from bottom to top.
please help me with this issue, and btw, i lost many contacts after updating.

Do a simple reboot on the BlackBerry in this manner: With the BlackBerry device POWERED ON, remove the battery for a minute, and then reinsert the battery to reboot. A reboot in this manner is prescribed for most glitches and operating system errors, and you will lose no data on the device doing this.
Now, try adding and saving a contact again?
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Can't save/update contacts.

I have been trying to save numbers and create new contacts to my Q10 but to no avail. I have rebooted, restored factory settings and still cannot either add new numbers to existing contacts or set up new contacts please help
tutu2222

Found the solution and it worked on my phone. It was from a later post on the same issue.
To resolve this issue, please follow the steps below:
On the home screen of the BlackBerry smartphone, select Options.
Select Applications.
Select Add-on.(I didnt have this on my phone, I had to go into my IM folder to find it)
Select Yahoo Messenger.
Select Delete.
Restart the BlackBerry smartphone when prompted.
Visit BlackBerry.com/yahoomessenger from the browser on the BlackBerry smartphone to re-install Yahoo! Messenger for BlackBerry smartphones version 2.5.125.

A year ago I paid to update my Pages. If I click on the doc on the desktop the old Pages opens up and I can't save my work. Help!

A year ago I paid to update Pages to 4.1. If I click on a Pages doc on the desktop the old Pages opens up and I can't save my work and so I lose what I do. So for a year I have been remembering to open Pages using the icon on the bottom of the desktop and all is OK. But when my work is being reviewed and resent to me, then I have problems with opening that file and saving those changes. So I have been coping and pasting the resent work to me and putting it into a new doc.
So today wanting to fix this annoying problem and reading something on this forum I went into applications and moved a Pages something that was in Applications into the iwork 09 file. A pop up box asked if I wanted to replace the old Pages with the newer version and I clicked Yes.
Now I can't open up any of my Pages work on the desktop.
I have not shut down my laptop and restarted - would this solve the problem?
I am not going to panic - just yet ... but can anybody help!!

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar
Apple will exchange your iPod for a refurbished one for $199 for 64 GB one and $99 for the other 4Gs. They do not fix yours. The cracked screen voids any warranty you had on the iPod.
Apple - iPod Repair price

I am updating from windows xp to windows 7, how can I save my bookmarks and bookmark tool bar to install on new computer

I am updating to a new computer, old system was Windows XP my new computer is Windows 7. Can I save my bookmarks and bookmark toolbar from old XP system to install on my new Windows 7 system ?

See:
*http://kb.mozillazine.org/Profile_backup
*http://kb.mozillazine.org/Backing_up_and_restoring_bookmarks_-_Firefox
*https://support.mozilla.com/kb/Recovering+important+data+from+an+old+profile

Error while updating the Human task in JDeveloper. Can not save the changes

When I try to update my Human task the following error is occuring in JDeveloper and I can't save my changes, any help will be appreciable. thank you.
Uncaught exception
java.lang.NullPointerException
o.bpel.services.workflow.verification.impl.TaskContentAccess.getAccess(TaskContentAccess.java:127)
o.tip.tools.ide.workflow.util.AccessRulesUtil.getDefaultActionAccessData(AccessRulesUtil.java:265)
o.tip.tools.ide.workflow.util.AccessRulesUtil.getChangedActionAccessData(AccessRulesUtil.java:174)
o.tip.tools.ide.workflow.editor.tab.TaskActionAccessConfigurationPanel.getData(TaskActionAccessConfigurationPanel.java:272)
o.tip.tools.ide.workflow.editor.tab.TaskAccessConfigurationPanel.getActionData(TaskAccessConfigurationPanel.java:103)
o.tip.tools.ide.workflow.editor.tab.AdvancedOptionsPanel.getData(AdvancedOptionsPanel.java:215)
o.tip.tools.ide.workflow.editor.tab.AdvancedOptionsEditor$LocalPropertyChangeListener.propertyChange(AdvancedOptionsEditor.java:141)
j.beans.PropertyChangeSupport.firePropertyChange(PropertyChangeSupport.java:339)
j.beans.PropertyChangeSupport.firePropertyChange(PropertyChangeSupport.java:276)
j.a.Component.firePropertyChange(Component.java:8128)
o.tip.tools.ide.workflow.editor.tab.AssigneesEditor.propertyChange(AssigneesEditor.java:186)
j.beans.PropertyChangeSupport.firePropertyChange(PropertyChangeSupport.java:339)
j.beans.PropertyChangeSupport.firePropertyChange(PropertyChangeSupport.java:276)
j.a.Component.firePropertyChange(Component.java:8128)
o.tip.tools.ide.workflow.editor.v2.StageEditor.firePropertyChange(StageEditor.java:1488)
o.tip.tools.ide.workflow.editor.v2.StageEditor.propertyChange(StageEditor.java:1081)
j.beans.PropertyChangeSupport.firePropertyChange(PropertyChangeSupport.java:339)
j.beans.PropertyChangeSupport.firePropertyChange(PropertyChangeSupport.java:276)
j.a.Component.firePropertyChange(Component.java:8128)
o.tip.tools.ide.workflow.editor.v2.ParticipantEditor.editParticipant(ParticipantEditor.java:1304)
o.tip.tools.ide.workflow.editor.v2.ParticipantEditor$LocalMouseAdapter.mouseClicked(ParticipantEditor.java:1004)
j.a.Component.processMouseEvent(Component.java:6266)
jx.s.JComponent.processMouseEvent(JComponent.java:3267)
j.a.Component.processEvent(Component.java:6028)
j.a.Container.processEvent(Container.java:2041)
j.a.Component.dispatchEventImpl(Component.java:4630)
j.a.Container.dispatchEventImpl(Container.java:2099)
j.a.Component.dispatchEvent(Component.java:4460)
j.a.LightweightDispatcher.retargetMouseEvent(Container.java:4574)
j.a.LightweightDispatcher.processMouseEvent(Container.java:4247)
j.a.LightweightDispatcher.dispatchEvent(Container.java:4168)
j.a.Container.dispatchEventImpl(Container.java:2085)
j.a.Window.dispatchEventImpl(Window.java:2478)
j.a.Component.dispatchEvent(Component.java:4460)
j.a.EventQueue.dispatchEvent(EventQueue.java:599)
j.a.EventDispatchThread.pumpOneEventForFilters(EventDispatchThread.java:269)
j.a.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:184)
j.a.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:174)
j.a.EventDispatchThread.pumpEvents(EventDispatchThread.java:169)
j.a.EventDispatchThread.pumpEvents(EventDispatchThread.java:161)
j.a.EventDispatchThread.run(EventDispatchThread.java:122)

Resolved ..
It was an issue with permissions .
Thanks

Can't save PDFs from Safari or Firefox after latest (10.1.3) update

I just installed the latest update, and now when I open a PDF in Safari, I can't save it to my computer. I get a message saying "The document XXX.pdf could not be exported as XXX." When I try to do it from Firefox, the PDF won't even open. I tried deleting the plugins and reinstalling Reader and that didn't help. Any ideas? Thanks!

Hi mccradks1,
Regarding firefox, update it to version 10.0 or later and use it in 32-bit mode only.
To save pdf's in safari, please try using the save button in toolbar and see if it works.
Toolbar is present in two different forms:
1.
2. This toolbar appears when you hover the mouse at bottom of pdf screen.
Thanks,
Nikhil

How do I avoid the "can't save to disk" notice when updating LION?

I've tried to update Lion 3 times (through Software Update) and after 2 hours of downloading it gives me a notice that it can't "save to disk." I have 80 gigs available on my harddrive so I don't know what I'm doing wrong. Please HELP!

Thanks for showing an interest… But!
I have tried all the regular stuff. This problem only showed up in OSX Lion. Up till then all was well at Snow Leopard and Adobe CS5.5 Suite. After upgrading to OSX Lion all Hell broke loose. Quite a catastrophe of conflicts. In Design wouldn’t launch. A problem with Suitcase Fusion 4. But PS CS6 had two major problems. One the Epson Artisan 835 could not be seen in Imports. A conflict between 32 and 64 bit formats and again, drivers. But the most persistent and perplexing problem has been that of the preferences. Oh and one other thing, whenever you quit the program, PS CS6, a message appears saying that the program has quit for no good reason and did I want to send a report to Adobe and/or Mac. Well I must have sent them a thousand reports. What I most suspect is file damage and incompatibility. What I have tried has not found the files to replace those that will reset themselves. i.e. .plst etc. without buggering up the works. I have tried to figure out what might have caused such changes between Snow and Lion other than the well known differences regarding supported stuff, formats and out of date software i.e. Rosetta. Some how or other I suspect damaged files. The kind of damage where a single character is missing and nothing works but no file checker in the world can detect as screwing up the works. Now in several cases a lot of re-installation has been done. But again no help. So putting a finger on the culprit file(s) has not been easy. Fortunately this machine has four active drives so reverting back to where all was OK is easy. But as for going forward, well that is at a standstill.
So, if any body out there has any insight to these three problems I would be most interested to see what you got.
Many Thanks

I can't save Logic Projects/Files since updating to Lion. Help?!

I can't save Logic Projects/Files since updating to Lion. Help?!

I just had the same problem, after working on a project for a couple of hours and thinking it was saved, I go back to work on it some more and all the work I had done was not there. This is totally frustrating. I posted here as well and haven't had any responses. Good luck to you.

Can't save and update

Hi
I Install Epm Add in in my server
But user can't save or update
Thanks

Hi,
Check few things,
1)     Check that your input template is not protected.
2)     If it is protected then first unlock it then only edit options will enable for you. Do your changes             and then again lock.
3)     If you input template is not protected then check task profile which is assigned to user and he               has access to edit existing reports/ Input schedules.
4)     If he has access to edit reports and Input schedules then Kindly check that is there are any                        microsoft updates are installed (KB2553154). If theseupdates are installed then try to uninstall                        the Microsoft update "Security update and restart your PC.
          Also go through below links.
FORMAT to increase column width and Nested IF
SAP EPM 10 8586 context not locking on Excel 2013 64 bit after ms updates
EPM Add in is not working properly
Re: EPM "Edit Report" is grayed out
5)     Once edit report is enable for you then also you can use report specific options then Go to edit              option and check report specific option. Unchecke Inherit sheet options and do check              mark                  use input form
Hope this will solve your problem.
Regards
Sushant

Can't save bookmarks since last OS update

I can't save bookmarks since the last OS update. When I do, I get the Spinning Beach Ball of Death and the app crashes. Any ideas?

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
Step 1
For this step, the title of the Console window should be All Messages. If it isn't, select
          SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
          View ▹ Show Log List
from the menu bar at the top of the screen.
In the top right corner of the Console window, there's a search box labeled Filter. Initially the words "String Matching" are shown in that box. Enter the name of the crashed application or process. For example, if Safari crashed, you would enter "Safari" (without the quotes.)
Each message in the log begins with the date and time when it was entered. Select the messages from the time of the last crash, if any. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
☞ The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
☞ Some private information, such as your name, may appear in the log. Anonymize before posting.
Step 2
In the Console window, select
          DIAGNOSTIC AND USAGE INFORMATION ▹ User Diagnostic Reports
(not Diagnostic and Usage Messages) from the log list on the left. There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You'll see a list of crash reports. The name of each report starts with the name of the process, and ends with ".crash". Select the most recent report related to the process in question. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot.
I know the report is long, maybe several hundred lines. Please post all of it anyway.
If you don't see any reports listed, but you know there was a crash, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
Please don’t post other kinds of diagnostic report—they're very long and rarely helpful.

Can't save Word documents after OS update

I downloaded the most recent OS update today (2-2-12) and now I can't save any MS Word or Excel files. I also lose the ability to close these programs when I try to save, requiring a force quit of the program.

Hi Wandering and Littleredgto,
I am experiencing exactly the same problems, and I am also still on OS 10.6.8. In my case the problem occurred after the latest security update from 2/1/12. I did not do a remote client update.

In Word 2004 I can not save documents or quit. One suggestion is the recent security update. Any suggestins on how to fix?

In Word 2004 I can not save documents or quit. One suggestion is the recent security update. Any suggestins on how to fix?

Security Update 2012-001 Bricks Rosetta programs
I've outlined the restore proceedure here, it covers a lot of bases and explains what is going to occur so please don't be intimidated it's a LOT easier that it appears.
Take your time and comprehend the steps involved and you'll be backup up like before in short order.
Restore method.
#1 Backup your personal data off the machine.
If you get a gray screen or some other hangup upon booting, try holding the Shift key down while booting to enter Safe Mode.
Backup files off the computer (not to TimeMachine). If you don't have a external drive, get one and connect to the USB/Firewire port and simply drag and drop copy your User folder to the external drive, it will copy all your files. It's best to have two backups of your data off the machine when trying to restore.
Disconnect all drives now to prevent any mistakes from occuring.
#2 Try Restoring from a TimeMachine or hold option bootable clone
If you have TimeMachine drive, or a hold the option key bootable clone use that to erase and restore from before the Security Update occured.
Obviously if you didn't make a recent backup before the update, your going to have to skip to Step #3.
Note: A TM restore can take a awfully long time, a clone restore takes under 2 hours in most cases.
If you don't know how to restore from TM drive
http://pondini.org/OSX/Home.html
#3 Reinstall OS X 10.6 from disk
If no recent TM or bootable clone then:
Get out your 10.6 install disk and make sure it's clean and polished (very soft cloth and a bit of rubbing alcohol, no scratches) If your disk is borked, you'll have to order a new one from Apple with your serial number.
Hold c boot off the 10.6 disk (wired keyboard, internal optical drive), use Disk Utility First Aid to >Repair Disk and Permissions of your internal drive (do not format or erase!!), Quit DU and simply re-install 10.6.
Note: Simply reinstalling 10.6 version from disk (without erasing the drive) only replaces 10.6.8 with 10.6.x and bundled Apple programs, won't touch your files (backup anyway) or most programs, unless they installed a kext file into OS X itself. (only a few on average do this)
Note: If Disk Uitlity can't repair the drive, then come back to seek further assistance and make sure you have a copy of your data off the machine.
#4 Update to 10.6.8 without Security Update 2012-001
Reboot and log in, update to 10.6.8 via Software Update, but EXCLUDE THE Security Update 2012-001 by checkinig the details and unchecking the blue check box.
#5 Reinstall any non-working third party programs
When you reboot, make sure to reinstall any programs that require kext files installed into OS X, you'll know, they won't work when you launch them or hang for some reason.
If for some freakish reason you get gray screen at any time when booting (possible it might occur when you reinstall older programs), hold the shift key down while booting (Safe Mode, disables kext files) and update your installed third party software so it's compatible with 10.6.8.
https://support.apple.com/kb/TS2570
Note: For most users likley Step #3 and #4 is likley all that is needed to be done.
That's it really.
Further Reading:
Learn how to have a OS X drive restore ability using TimeMachine or cloning software
Learn how to clone your entire OS X boot here
http://www.bombich.com/get_ready_for_lion.html
TimeMachine help here
http://pondini.org/OSX/Home.html
Make copies of your original Snow Leopard
http://www.walterjessen.com/make-a-bootable-backup-snow-leopard-install-disc/
Learn how to make a bootable SL USB thumb drive
http://www.maciverse.com/install-os-x-snow-leopard-from-usb-flash-drive.html
Deciding on upgrading to Lion?
Learn which programs ARE NOT compatible/updated for Lion, Rosetta programs will not run on Lion.
http://roaringapps.com/apps:table
Unverified hacks
Note: You may see a "hack" for this issue floating around, it has had mixed results as people's software is different.
You may want to try it, but it's at your own risk. It has worked fast for some and not at all for others, hopefully over time it will work for all.
The above methods I outline are Apple approved restore methods + based upon experience here and not a quick fix, but are sure to work as Apple recommends such steps themselves.
If at any time you feel this is beyond your capability, please seek local Mac/PC professional assistance before you lose your data.
In fact my steps above are very simple, you might want to have a family member or friend perfrom the proceedure in about a hour or two.
If you don't have any backup, please maintain at least a TM drive, just hook up a new blank external drive and TM will ask you to make a backup, takes some time so let it work.
If your a bit more skilled, a option bootable clone is much superior than TM drive.
Good Luck

How can I save a scanned document after updating to Mavericks?

Since updating to mavericks on my IMAC, I can not save a scan using my HP photo smart 3180 scanner. I get an error message: the file could not be written to. Check properties for the file to make sure it in not in read-only. I had no problem saving scanned documents before the update.

Not true, Image Capture can Save in PDF Format
and to anywhere you like, including Preview which can handle multiple PDF doc's.
If you do not like or do not wish to spend a little time figuring out Image Capture, then try scanning with Preview like HP is suggesting in the link that baltwo posted.

Can't save updates

Similar Messages

Maybe you are looking for