Can't scan with new 1050
I have been scanning with Adobe Acrobat Professional 8 and a Lexmark all in one printer. The printer's printhead became blocked, and cost of fixing was too much, so I bought this HP printer. Installed it, and made it default. It prints and copies fine. When I tried to scan, Acrobat didn't know the HP was there, and looked for the Lexmark. When I plugged it into the Lexmark, it consistently crashed, whatever I tried. The only change is the new printer. Somehow its installation has made it impossible for me to scan at all, on either device. I'm at my wit's end. Please help. Thanks,Bob
Hi Bob,Acrobat Professional 8 only support Twain-Compliant devices, while the HP printer only support Apple's ICA compliant application. As a reference you may find the following article from Adobe:Acrobat has ICA support on MAC 10.7 for now with Acrobat XI onlyhttps://helpx.adobe.com/acrobat/kb/troubleshoot-scanning-problems-acrobat-8.html You may scan using Image Capture or the HP Scan application, then open / import the scanned file into Adobe. You may find the Scanning specifications listed below, a Twain-compliant software interface only available for Windows:http://support.hp.com/us-en/product/HP-Deskjet-1050-All-in-One-Printer-series---J4/4027462/model/4027464/document/c02063036/ You may find any steps to scan with your printer in the following link:http://support.hp.com/us-en/product/HP-Deskjet-1050-All-in-One-Printer-series---J4/4027462/model/4027464/document/c03548786/ Regards,Shlomi
Similar Messages
-
My PC died and in turn so did my main iTunes library. My iPhone was synced to the library that is gone. Now when I try to connect to another library, it tells me the phone must be wiped clean before I can manage music with new library. Any way around that? I don't want to lose the music that is on my phone. I am looking for a way to tell the phone to "forget" the old library and let me start working with a new library.
It has always been very basic to always maintain a backup copy of your computer for just such an occasion.
Use your backup copy of your computer to put everything on the new one.
It sounds like you have failed to do this, which is not good at all.
You will have to transfer your itunes purchases from your iphone. Authorize your computer for your itunes account
About iTunes Store authorization and deauthorization
Open itunes, plug in iphone, do NOT sync, click File>Transfer Purchases
When you do sync you will lose your pics ( photo library - synced from your old computer), your itunes content ( music, apps, videos,etc) , your contacts and your calendars. So do NOT sync yet. This is why a backup copy is so important.
Enter one unique contact and calendar entry on your computer.
When you first sync, you should get the option to merger the data. Choose it.
If you want your pics, then you will need to e-mail them to yourself before you sync. They will not be of the original quality as they are reduced when synced to iphone.
When all is as goos as it can be, then backup your computer, and always maintain the backup. -
I changed my email address for my apple id but icloud still has old email adress and when I try to signout so I can sign in with new address it asks for password and then says invalid so I cannot delete the account to sign in with the new one! Please help
OK...now I appear to 'progressed' I changed my email address back to original on Apple id and then was able to delete icloud account. Apparently I couldnt do it as it kept requesting password when I entered passsword ( both old and new one, it wouldnt accept it as it had my old email address in ) It didnt do that on ios6 . Anyway I deleted account, but now I tried to login in with my new id/password and it says unable as already in use!!! More help needed please! Its a nightmare!!
-
How to I completely delete my music in iCoud so I can start over with new play lists? I get the message that my files aren't music files. Can I see what is in my iCloud file?
Thank you Csound1, ok I guess I did manage to delete it but now when I copy new mp3 files they come as mpeg and iCoud won't accept them? Why? Do I have to convert them all now or can I set it somewhere to take them as mp3's. Appreciate the help. Have a great day! Cheers Steve
-
How can I scan with mavericks using Epsom printer
How can I scan with mavericks using Epsom printer
Some users have had success using Image Capture in the Applications folder - although it doesn't seem to work for everybody. Worth a try.
-
Two hours still can't scan with photoshop cs6
two hours still can't scan with photoshop cs6 any ideas?
Hi,
Thanks for responding. Windows Vista - installed Flash Player 11 - no change -
updated all drives on HP PSC 2355 scanner - no change - added twain 24 bit
because read that 48 was not compatible with cs6 - no change.
Basically, when I go file - import - I should see the option WIA -HP PSC 2350
and it is not there which tells me my scanner is not integrated with cs6 as it
was with cs3.
Any ideas?
Richard -
How can i scan with my epson 837 printer wireless using 10.7.5
how can i scan with epson 837 printer. i am wireless using os x 10.7.5
This seems to be a commercial product. For the best chance at finding a solution I would suggest posting in the forum for HP Business Support!
You can find the Commercial Laserjet board here:
http://h30499.www3.hp.com/t5/Printers-LaserJet/bd-p/bsc-413
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too. -
Can't scan with Epson Stylus DX4450
Hi everybody.
I'm trying to configure my Epson Stylus DX4450. Printing works like a charm, but scanner is not. I tried to configure it as it was suggested on various websites. I've installed sane, xsane, iscan (from http://repo.archlinux.fr/i686) also I've downloaded iscan-plugin-cx4400 from Avasys website, extracted it with rpmextract ant put the library to /usr/lib/iscan.
When I try sane-find-scanner it shows:
# sane-find-scanner will now attempt to detect your scanner. If the
# result is different from what you expected, first make sure your
# scanner is powered up and properly connected to your computer.
# No SCSI scanners found. If you expected something different, make sure that
# you have loaded a kernel SCSI driver for your SCSI adapter.
found USB scanner (vendor=0x04b8 [Language Error], product=0x083f [Language Error]) at libusb:002:010
# Your USB scanner was (probably) detected. It may or may not be supported by
# SANE. Try scanimage -L and read the backend's manpage.
# Not checking for parallel port scanners.
# Most Scanners connected to the parallel port or other proprietary ports
# can't be detected by this program.
# You may want to run this program as root to find all devices. Once you
# found the scanner devices, be sure to adjust access permissions as
# necessary.
When I try scanimage -L it's idle for about a minute and then it shows:
No scanners were identified. If you were expecting something different,
check that the scanner is plugged in, turned on and detected by the
sane-find-scanner tool (if appropriate). Please read the documentation
which came with this software (README, FAQ, manpages).
But when I try it again it shows:
device `epkowa:libusb:002:010' is a Epson flatbed scanner
Then if I try sane-find-scanner again it will show no language errors:
found USB scanner (vendor=0x04b8, product=0x083f) at libusb:002:010
xsane will check for available devices for some time, then it shows a message, that no device is available. iscan shows a message "Could not send command to scanner. Check the scanners status". Sometimes iscan will launch, but I can't scan, because it will show me the "Could not send..." error message.
Device usually turns off when I try xsane. Two times xsane launched, but Epson turned off right after it. It also turns off sometimes when I try sane-find-scanner second time or when I try to launch iscan.
I read that there can be a conflict between sane and gphoto, moved /etc/udev/rules/54-gphoto.rules and restarted udev - still didn't work.
/etc/sane.d/dll.conf:
# enable the next line if you want to allow access through the network:
net
abaton
agfafocus
apple
avision
artec
artec_eplus48u
as6e
bh
canon
canon630u
#canon_pp
cardscan
coolscan
coolscan2
#dc25
#dc210
#dc240
dell1600n_net
dmc
epjitsu
#epson
#epson2
epkowa
fujitsu
#gphoto2
genesys
gt68xx
hp
hp3900
hpsj5s
hp3500
hp4200
hp5400
hp5590
hpljm1005
hs2p
ibm
leo
lexmark
ma1509
matsushita
microtek
microtek2
mustek
#mustek_pp
mustek_usb
mustek_usb2
nec
niash
pie
pint
pixma
plustek
#plustek_pp
#pnm
qcam
ricoh
s9036
sceptre
sharp
sm3600
sm3840
snapscan
sp15c
#st400
#stv680
tamarack
teco1
teco2
teco3
#test
u12
umax
#umax_pp
umax1220u
v4l
# The following backends are not included in the sane-backends distribution
# If you want to use them, download them from their webpages and read their
# documentation
# HP OfficeJet backend homepage: http://hpoj.sf.net/
# Uncomment the following line if hpoj is installed:
#hpoj
hp_rts88xx
#hpaio
/etc/sane.d/epkowa.conf:
# epkowa.conf -- sample configuration for the EPKOWA SANE backend
# Copyright (C) 2004 Olaf Meeuwissen
# See sane-epkowa(5), sane-scsi(5) and sane-usb(5) for details.
# SCSI scanners can be configured simply by listing the path to the
# device. For example, if your system claims to have a /dev/scanner
# SCSI device, all you have to do is uncomment the following line:
#/dev/scanner
# In the interest of maintainability, most installations would have
# /dev/scanner sym-linked to the real SCSI scanner device node.
# An alternative way that works for many operating systems and is a
# little bit more generic, is to have the backend probe for your SCSI
# scanner with the following configuration command:
#scsi EPSON
# On systems with libusb, the following line is sufficient to get the
# backend to recognise your USB scanners. It presumes, however, that
# the scanner---more precisely, it's USB product ID---is known to the
# backend.
# For all USB scanners that are officially supported by this backend,
# this presumption is true. A list of such scanners can be found in
# sane-epkowa(5).
usb 0x4b8 0x83f
# For any USB scanner not known to the backend (yet), you may, at your
# own peril(!!), force the backend to recognise and use it via libusb.
# You can do so by the following configuration command:
# usb <USB vendor ID> <USB product ID>
# SEIKO EPSON's USB vendor ID is '0x04b8' (without quotes). In order
# to find the USB product ID, use lsusb(1) or, on Linux systems, peek
# at the information in /proc/bus/usb/devices.
# A sample configuration for the Perfection 1650 (GT-8200), which has
# a product ID of 0x0110, would look as follows:
#usb 0x04b8 0x0110
# When not accessing your USB scanner via libusb, you may need to use
# one of the configuration commands below or commands that are almost
# the same. These commands typically access the scanner via a kernel
# scanner module.
usb /dev/usb/scanner0
usb /dev/usbscanner0
usb /dev/uscanner0
# Linux had a scanner module until version 2.6.2. As of version 2.6.3
# libusb is your only option. Linux' scanner module can be loaded via
# the modprobe(8) command like so:
# modprobe scanner vendor=<USB vendor ID> product=<USB product ID>
# If the scanner module already knows the vendor and product IDs, you
# do not have to specify them. If you want to have this done automa-
# tically every time you boot, you can add the above line, except for
# the modprobe command itself, to your /etc/modules file.
# Although not tested with this backend, parallel port scanners should
# be usable. You can configure them as shown below, but I do not know
# much about the details. Information is welcome.
#pio 0x278
#pio 0x378
#pio 0x3BC
/etc/udev/rules.d/53-sane.rules (shortened):
# This file was automatically created based on description files (*.desc)
# by sane-desc 3.3 from sane-backends 1.0.19 on Fri Mar 7 06:29:43 2008
# udev rules file for supported USB devices
# To add a USB device, add a rule to the list below between the
# LABEL="libsane_rules_begin" and LABEL="libsane_rules_end" lines.
# To run a script when your device is plugged in, add RUN+="/path/to/script"
# to the appropriate rule.
# The following list already contains a lot of scanners. If your scanner
# isn't mentioned there, add it as explained above and mail the entry to
# the sane-devel mailing list ([email protected]).
ACTION!="add", GOTO="libsane_rules_end"
ENV{DEVTYPE}=="usb_device", GOTO="libsane_create_usb_dev"
SUBSYSTEM=="usb_device", GOTO="libsane_rules_begin"
SUBSYSTEM!="usb_device", GOTO="libsane_rules_end"
# Kernel >= 2.6.22 jumps here
LABEL="libsane_create_usb_dev"
# For Linux >= 2.6.22 without CONFIG_USB_DEVICE_CLASS=y
# If the following rule does not exist on your system yet, uncomment it
# ENV{DEVTYPE}=="usb_device", NAME="bus/usb/$env{BUSNUM}/$env{DEVNUM}", MODE="0664", OWNER="root", GROUP="root"
# Kernel < 2.6.22 jumps here
LABEL="libsane_rules_begin"
# EPSON Stylus CX4300 | EPSON Stylus CX4400 | EPSON Stylus CX5500
# EPSON Stylus CX5600 | EPSON Stylus DX4400 | Epson Stylus DX4450
ATTRS{idVendor}=="04b8", ATTRS{idProduct}=="083f", MODE="0664", GROUP="scanner", ENV{libsane_matched}="yes"
# The following rule will disable USB autosuspend for the device
ENV{libsane_matched}=="yes", RUN+="/bin/sh -c 'test -e /sys/$env{DEVPATH}/power/level && echo on > /sys/$env{DEVPATH}/power/level'"
LABEL="libsane_rules_end"
Can anyone help with this?Almost solved.
First I've copied files extracted from iscan-plugin-cx4400.rpm from /usr/lib/iscan to /usr/lib/sane. Didn't work.
Then I've checked version of iscan with yaourt and it appeared that aur have newer version than the one from archlinux.fr repo. I've built it, moved epkowa.conf.pacsave to epkowa.conf and it worked once.
sane-find-scanner output was the same, with language errors, but scanimage -L showed that it found my scanner (don't have the exact output - it was different than before). xsane still didn't found the device but I managed to preview and scan to file printer test page with iscan.
When I tried it for the second time, sane-find-scanner output was the same, but scanimage -L didn't recognised the scanner. iscan didn't work. Tried to restart the device - still the same.
Tried to turn off the scanner, restart udev, start scanner again. Didn't work. -
Can't Scan after new installation
A bit of background;
Dell laptop
Windows 8.1 64bit
HP Officejet 6500 e709n
I finally managed to install the full set of printer drivers (HP Solution Center) on this new laptop ....which btw took hours of research, just to learn that I can't scan.
I get the an HP popup message saying ERROR Imaging Device Not Found along with a number of steps to reolve the issue....and yes I followed most of the steps listed below except for the unistall/reinstall since this is a new installation.Hello G4ME,
Welcome to the HP Forums!
I understand you're receiving a message indicating "Imaging Device Not Found" using the Officejet 6500 e709n. I will do my best to assist you!
How is this printer connected? Wireless or USB?
Follow this entire HP document on 'The HP imaging device was not found on the network' Message Displays on the Computer (Windows). Please post your results, as I will be looking forward to hearing from you. Have a great night!
I worked on behalf of HP. -
Ipod can.t sync with new itunes
My itunes software got some problem so i remove it,then download a new one,but can't sync,screen show that one ipod just can sync with one itunes only,so what can i do;reset or what??HELP!
"Screen show that one ipod just can sync with one itunes only"
The message you are getting is due to your iPod being set to automatically update from iTunes (sync), an iPod can only sync with one library. If it is set to update automatically you'll get a message that it is linked to a different library and asking if you want to link to this one and replace all your songs etc. If your new iTunes has the same music as your iPod then pressing "Erase and Sync" will link your iPod to the library and update it with the songs you have on there.
However if your new library is empty choose "Cancel", your iPod should appear in the iTunes source list from where you can change the update setting to manual and use your iPod without the risk of accidentally erasing it. Also when using most of the utilities listed below your iPod needs to be enabled for disc use, changing to manual update will do this by default. Check the "manually manage music and videos" box in Summary then press the Apply button: Managing content manually on iPod
Once you are safely connected there are a few things you can do to restore your iTunes from the iPod. If you have any iTMS purchases the transfer of purchased content from the iPod to authorised computers was introduced with iTunes 7. A paragraph on it has been added to this article: Transfer iTunes Store purchases using iPod
The transfer of non iTMS content such as songs imported from CD is designed by default to be one way from iTunes to iPod. However there are a number of third party utilities that you can use to retrieve the music files and playlists from your iPod. You'll find that they have varying degrees of functionality and some will transfer movies, videos, photos, podcasts and games as well. Have a look at the web pages and documentation, this is just a small selection of what's available, they are generally quite straightforward. You can also read reviews of some of them here: Wired News - Rescue Your Stranded Tunes
TuneJack Windows Only
iPod2PC Windows Only
iGadget Windows Only
iDump Windows Only
iRepo Windows Only
iPodRip Mac & Windows
YamiPod Mac and Windows Versions
Music Rescue Mac & Windows
iPodCopy Mac and Windows Versions
There is also a manual method of accessing the iPod's hard drive and copying songs back to iTunes on Windows or a Mac. The procedure is a bit involved and won't recover playlists but if you're interested it's available at this link: Two-way Street: Moving Music Off the iPod
Whichever of these retrieval methods you choose, keep your iPod in manual mode until you have reloaded your iTunes and you are happy with your playlists etc then it will be safe to return it auto-sync. I would also advise that you get yourself an external hard drive and back your stuff up, relying on an iPod as your sole backup is not a good idea and external drives are comparatively inexpensive these days, you can get loads of storage for a reasonable outlay. -
I can't scan to my computer with my HP Photosmart Plus B2010a, I get a "Failed to open a session on the device" message everytime. I'm using the most current driver for OS X Lion 10.7 off the HP website.
I get the same "Failed to open a session on the device" message with Apple Image Capture as I do with the HP Utility software.
-
Can't scan with feeder, but feeder works when printing
Hello Everyone,
Hope you can help me. The feeder works fine when printing, but does not feed when scanning. However, the scanner works fine on the flat bed. so...
The feeder works when printing
the scanner works on the flat bed, but
I'm not able to scan with the feeder. Ugh!
I updated my driver and tried everything on the HP website to no avail. Scanning page by page on the flat bed is way too tedious and time-consuming. Can anyone help me?Hi @zaja
Have you seen this page: The Automatic Document Feeder (ADF) Does Not Pick Up Paper?
AlliBee
I am an HP employee, but opinions expressed here are my own.
Click the thumbs up + button if I have helped you. Mark Accepted Solution if your problem is solved. If both apply......do both. -
[SOLVED] Can't Scan with HP OfficeJet 4500
My cups says at http://localhost:631/printers/HP_Officejet_4500_G510g-m this:
HP_Officejet_4500_G510g-m
HP_Officejet_4500_G510g-m (Idle, Accepting Jobs, Not Shared)
Description: HP Officejet 4500 G510g-m
Location:
Driver: HP Officejet 4500 g510g-m hpijs, 3.14.10 (color, 2-sided printing)
Connection: usb://HP/Officejet%204500%20G510g-m?serial=CN21CG201N05CQ&interface=1
Defaults: job-sheets=none, none media=na_letter_8.5x11in sides=one-sided
and it prints fine.
But I can't scan now. I could before. This is what I see in my terminal:
$ sudo hp-check
Saving output in log file: /home/kirk/hp-check.log
HP Linux Imaging and Printing System (ver. 3.14.10)
Dependency/Version Check Utility ver. 15.1
Copyright (c) 2001-13 Hewlett-Packard Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
Note: hp-check can be run in three modes:
1. Compile-time check mode (-c or --compile): Use this mode before compiling the HPLIP supplied tarball (.tar.gz or .run) to determine if
the proper dependencies are installed to successfully compile HPLIP.
2. Run-time check mode (-r or --run): Use this mode to determine if a distro supplied package (.deb, .rpm, etc) or an already built HPLIP
supplied tarball has the proper dependencies installed to successfully run.
3. Both compile- and run-time check mode (-b or --both) (Default): This mode will check both of the above cases (both compile- and
run-time dependencies).
Check types:
a. EXTERNALDEP - External Dependencies
b. GENERALDEP - General Dependencies (required both at compile and run time)
c. COMPILEDEP - Compile time Dependencies
d. [All are run-time checks]
PYEXT SCANCONF QUEUES PERMISSION
Status Types:
OK
MISSING - Missing Dependency or Permission or Plug-in
INCOMPAT - Incompatible dependency-version or Plugin-version
warning: arch distro is not found in AUTH_TYPES
warning: unknown- version is not supported. Using unknown-0 versions dependencies to verify and install...
| SYSTEM INFO |
Kernel: 3.17.4-1-ARCH #1 SMP PREEMPT Fri Nov 21 21:14:42 CET 2014 GNU/Linux
Host: arch
Proc: 3.17.4-1-ARCH #1 SMP PREEMPT Fri Nov 21 21:14:42 CET 2014 GNU/Linux
Distribution: unknown
Bitness: 64 bit
| HPLIP CONFIGURATION |
HPLIP-Version: HPLIP 3.14.10
HPLIP-Home: /usr/share/hplip
warning: HPLIP-Installation: Auto installation is not supported for unknown distro version
Current contents of '/etc/hp/hplip.conf' file:
# hplip.conf. Generated from hplip.conf.in by configure.
[hplip]
version=3.14.10
[dirs]
home=/usr/share/hplip
run=/var/run
ppd=/usr/share/ppd/HP
ppdbase=/usr/share/ppd
doc=/usr/share/doc/hplip-3.14.10
html=/usr/share/doc/hplip-3.14.10
icon=/usr/share/applications
cupsbackend=/usr/lib/cups/backend
cupsfilter=/usr/lib/cups/filter
drv=/usr/share/cups/drv/hp
bin=/usr/bin
# Following values are determined at configure time and cannot be changed.
[configure]
network-build=yes
libusb01-build=no
pp-build=yes
gui-build=yes
scanner-build=yes
fax-build=yes
dbus-build=yes
cups11-build=no
doc-build=yes
shadow-build=no
hpijs-install=yes
foomatic-drv-install=yes
foomatic-ppd-install=yes
foomatic-rip-hplip-install=no
hpcups-install=yes
cups-drv-install=yes
cups-ppd-install=yes
internal-tag=3.14.10
restricted-build=no
ui-toolkit=qt4
qt3=no
qt4=yes
policy-kit=no
lite-build=no
udev_sysfs_rules=no
hpcups-only-build=no
hpijs-only-build=no
Current contents of '/var/lib/hp/hplip.state' file:
Plugins are not installed. Could not access file: No such file or directory
Current contents of '~/.hplip/hplip.conf' file:
warning: Could not access file: No such file or directory
<Package-name> <Package-Desc> <Required/Optional> <Min-Version> <Installed-Version> <Status> <Comment>
| External Dependencies |
policykit Admin-Policy-framework OPTIONAL - 0.112 OK -
gs Ghostscript REQUIRED 7.05 9.15 OK -
network Network-wget OPTIONAL - 1.16 OK -
scanimage Shell-Scanning OPTIONAL 1.0 1.0.24 OK -
avahi-utils avahi-utils OPTIONAL - 0.6.31 OK -
dbus DBus REQUIRED - 1.8.10 OK -
cups CUPS REQUIRED 1.1 2.0.1 OK 'CUPS Scheduler is running'
xsane SANE-GUI OPTIONAL 0.9 0.999 OK -
| General Dependencies |
error: reportlab Python-PDF-Lib OPTIONAL 2.0 - MISSING 'reportlab needs to be installed'
libcrypto OpenSSL-Crypto-Lib REQUIRED - 1.0.1 OK -
error: pil Python-Image-Lib OPTIONAL - - MISSING 'pil needs to be installed'
pyqt4-dbus PyQt4-DBUS REQUIRED 4.0 4.11.3 OK -
libjpeg JPEG-Lib REQUIRED - - OK -
libpthread POSIX-Threads-Lib REQUIRED - 2.20 OK -
python-dbus Python-DBUS REQUIRED 0.80.0 1.2.0 OK -
python-devel Python-SDK REQUIRED 2.2 3.4.2 OK -
pyqt4 Python-Qt4 REQUIRED 4.0 4.11.3 OK -
cups-devel CUPS-SDK REQUIRED - 2.0.1 OK -
sane-devel SANE-SDK REQUIRED - 1.0.24 OK -
libusb USB-Lib REQUIRED - 1.0 OK -
sane Scan-Lib REQUIRED - 1.0.24 OK -
cups-image CUPS-Image-Lib REQUIRED - 2.0.1 OK -
libnetsnmp-devel SNMP-Networking-SDK REQUIRED 5.0.9 5.7.2 OK -
python-xml Python-XML-Lib REQUIRED - 2.1.0 OK -
python-notify Desktop-notifications OPTIONAL - - OK -
| Compile Time Dependencies |
gcc gcc-Compiler REQUIRED - 4.9.2 OK -
libtool Build-tools REQUIRED - 2.4.2 OK -
make GNU-Build-tools REQUIRED 3.0 4.1 OK -
| Python Extentions |
cupsext CUPS-Extension REQUIRED - 3.14.10 OK -
pcardext PhotoCard-Extension REQUIRED - 3.14.10 OK -
hpmudext IO-Extension REQUIRED - 3.14.10 OK -
| Scan Configuration |
hpaio HPLIP-SANE-Backend REQUIRED - 3.14.10 OK 'hpaio found in /etc/sane.d/dll.conf'
scanext Scan-SANE-Extension REQUIRED - 3.14.10 OK -
| DISCOVERED SCANNER DEVICES |
/^Cerror: User exit
Done.
I kill it because it just hangs. The issue appears to be "reportlab needs to be installed" but I beleve I have all the packages installed:
$ sudo pacman -Qs pyth
local/cython 0.21.1-1
C-Extensions for Python
local/gnome-python 2.28.1-9
PyGNOME Python extension module
local/libftdi 1.2-1
A library to talk to FTDI chips, optional python bindings.
local/libreoffice-still-common 4.2.7-2 (libreoffice-still)
Common files for LibreOffice maintenance branch
local/pygtk 2.24.0-5
Python bindings for the GTK widget set
local/pygtksourceview2 2.10.1-5
Python bindings for gtksourceview2
local/pyorbit 2.24.0-5
Python bindings for ORBit2
local/pyqt4-common 4.11.3-1
Common PyQt files shared between python-pyqt4 and python2-pyqt4
local/python 3.4.2-1
Next generation of the python high-level scripting language
local/python-atspi 2.12.0-1
Python 3 bindings for at-spi
local/python-bsddb 6.0.1-3
Python interface for BerkeleyDB
local/python-cairo 1.10.0-4
Python bindings for the cairo graphics library
local/python-dbus 1.2.0-4
Python 3.3 bindings for DBUS
local/python-dbus-common 1.2.0-4
Common dbus-python files shared between python-dbus and python2-dbus
local/python-gobject 3.14.0-2
Python 3 bindings for GObject
local/python-pyqt4 4.11.3-1
A set of Python 3.x bindings for the Qt toolkit
local/python-reportlab 3.1.8-1
A proven industry-strength PDF generating solution
local/python-setuptools 1:7.0-1
Easily download, build, install, upgrade, and uninstall Python packages
local/python-sip 4.16.4-1
Python 3.x SIP bindings for C and C++ libraries
local/python-xdg 0.25-2
Python library to access freedesktop.org standards
local/python-xlib 0.15rc1-6
A fully functional X client library for Python programs
local/python2 2.7.8-2
A high-level scripting language
local/python2-beaker 1.6.4-2
Caching and sessions WSGI middleware for use with web applications and stand-alone Python scripts and applications
local/python2-bonobo 2.28.1-9
Python bindings for interacting with Bonobo
local/python2-boto 2.34.0-1
A Python interface to Amazon Web Services (AWS)
local/python2-bsddb 6.0.1-3
Python interface for BerkeleyDB
local/python2-cairo 1.10.0-2
Python2 bindings for the cairo graphics library
local/python2-crypto 2.6.1-2
Collection of cryptographic algorithms and protocols, implemented for use from Python 2.
local/python2-dbus 1.2.0-4
Python 2.7 bindings for DBUS
local/python2-distutils-extra 2.38-2
Enhancements to the Python build system
local/python2-ecdsa 0.11-2
Implementation of ECDSA in Python
local/python2-gconf 2.28.1-9
Python bindings for interacting with GConf
local/python2-gnomecanvas 2.28.1-9
Python bindings for the GNOME Canvas
local/python2-gnomekeyring 2.32.0-15
Python bindings for libgnome-keyring
local/python2-gnomevfs 2.28.1-9
Python bindings for interacting with gnome-vfs
local/python2-gnupginterface 0.3.2-2
A Python interface to GNU Privacy Guard (GnuPG).
local/python2-gobject 3.14.0-2
Python 2 bindings for GObject
local/python2-gobject2 2.28.6-11
Python 2 bindings for GObject2
local/python2-keybinder2 0.3.0-2
Library for registering global keyboard shortcuts - Python 2 bindings
local/python2-keyring 4.0-2
Store and access your passwords safely.
local/python2-libgnome 2.28.1-9
Python bindings for libgnome
local/python2-lockfile 0.10.2-1
Platform-independent file locking module
local/python2-mako 1.0.0-1
Hyperfast and lightweight templating for the Python2 platform
local/python2-markupsafe 0.23-1
Implements a XML/HTML/XHTML Markup safe string for Python
local/python2-notify 0.1.1-13
Python bindings for libnotify
local/python2-numpy 1.9.1-1
Scientific tools for Python
local/python2-paramiko 1.15.1-1
Python module that implements the SSH2 protocol
local/python2-pyqt4 4.11.3-1
A set of Python 2.x bindings for the Qt toolkit
local/python2-pysqlite 2.6.3-4
A Python DB-API 2.0 interface for the SQLite embedded relational database engine
local/python2-sip 4.16.4-1
Python 2.x SIP bindings for C and C++ libraries
local/python2-wnck 2.32.0-15
Python bindings for libwnck
local/python2-xdg 0.25-2
Python library to access freedesktop.org standards
local/sip 4.16.4-1
A tool that makes it easy to create Python bindings for C and C++ libraries
local/wxpython 3.0.2.0-1
A wxWidgets GUI toolkit for Python
and I just reinstalled some and rebooted.
I am a bit lost as to what's wrong.
Last edited by CaptainKirk (2014-12-05 12:23:09)In reality I couldn't print either. Not sure what really fixed it, but it seemed that adding hpoj from AUR and rebooting did it. I then readded the printer and now all works.
-
Can't scan with HP 2710 using Mac OS-X Yosemite
When I try to scan, I get an error message stating "install or run HP software". I can print fine but can scan. I am wireless to my router and usb connected from router to printer. I cannot seem to find software for the scan feature for my operating system. Mac OS-X 10.10 Yosemite
Hi @ricmcd,
Welcome to the HP Forums!
I noticed that you cannot scan with your HP Photosmart 2710 using Mac OS X 10.10. I am happy to help you with your scanning!
Are you able to make copies with your printer? (This way we will know that the hardware is functional.)
According to your printer's specifications, and page 9 of the setup guide, the USB 2.0 printer cable must be connected from the printer directly to the computer. As this is the only method supported for connecting this printer to the computer. As this printer is not a wireless printer.
I would also suggest reading the following guides:
Installing a Mac Printer Driver Using Apple Software Update.
Scanning in OS X v10.10 Yosemite without HP Software.
If your printer is a different printer other than the HP Photosmart 2710, please respond with the printer's Product/Model Number. To find your printer's Product/Model Number follow instructions in this link. Finding Your HP Product Model Number, and I will be glad to look into this further.
Hope this clears things up!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping! -
Can't scan with snow leopard and canon pixma 850
I think I downloaded the newest driver but though I can print wirelessly I con't see my scanner utility so I can't scan. Ideas?
The inability to scan is caused by a limitation with the Airport device. The USB port of the AirPort Base Station and Time Capsule does not support printer utilities or other special features, such as scanning, that requires a direct proprietary connection.
Maybe you are looking for
-
How to set the header variables in weblogic
Hi, We have a following set up in our environment. We have weblogic and on the top of it we have apex listener deployed which redirects Oracle Apex. My Issue: How can we set up the header variables in weblogic once the user is authenticated against w
-
Usage of a specific infoobject in Queris/Workbooks
Hi everybody. I'm going to add some nav. attribute to 0vendor infobject, and than I need to update many queries in which 0vendor exists by replacing the 0vendor by the new nav. attribute. I need to now in which workbooks/queries that are in use (in t
-
Relation between bank account IDs and G/L accounts
I want to know the tables from where I can derive which G/L set belong to which Bank ID. Please reply. Thanks M A
-
I had accidentally deleted all my images from my iPhone 4s do u send me any solution or my phone back up. please sir its very important for me i have just one hope from you. Thank you
-
I've gotten so many errors with Encore 2 I don't know where to begin. I think this release wasn't ready. As I sit here typing I just had a project fail to create a DVD folder that was an exact copy from version 1.5 that I had backed up before install